Setting Values Cross Reference Table (The tire size is marked on both sides of the tire.)
TIRE SIZE
TIRE SIZE
TIRE SIZE
CATEYE TOMO
20 x 1.75
150
175
178
179
191
189
192
196
191
195
195
197
207
210
26 x 1.40
26 x 1.50
26 x 1.75
26 x 1.95
26 x 2.00
26 x 2.1
200
199
202
205
206
207
207
208
215
216
216
217
209
212
650 x 38B
700 x 18C
700 x 19C
700 x 20C
700 x 23C
700 x 25C
700 x 28C
700 x 30C
700 x 32C
700C Tubular
700 x 35C
700 x 38C
700 x 44C
211
207
209
209
210
211
214
217
216
213
217
218
222
24 x 1
CYCLOCOMPUTER
Model CC-ST200
24 x 3/4 Tubular
24 x 1-1/8 Tubular
24 x 1-1/4
24 x 1.75
24 x 2.00
26 x 2.125
26 x 2.35
27 x 1
U.S. Pat. Nos. 4636769/4642606/5236759/5226340/5264791
and Design Patented
24 x 2.125
26 x 1(559mm)
26 x 1(650c)
26 x 1.25
Copyright© 1996 CATEYE Co., Ltd.
CCMST2-970214 Printed in Japan 0687261
3
27 x 1-1/8
27 x 1-1/4
27 x 1-3/8
650 x 35A
650 x 38A
26 x 1-1/8 Tubular
26 x 1-3/8
TROUBLE SHOOTING
•
The following situations do not indicate malfunction of the cyclocomputer. Check the
following before taking to repair.
26 x 1-1/2
*
When current speed does not appear, short-circuit the contact on the back with metal.
The unit will function normally if the speed display appears.
Display response is slow.
----- Is it at a low temperature under 32°F(0°C)?
----- It returns to normal state when temperature rises.
No display.
#169-6160/#169-6165
Bracket Sensor Kit/(Long)
----- Has the Lithium Battery in the main unit worn out?
----- Replace the Lithium Battery with a new one.
Incorrect data appear.
----- Execute "All Clear" operation.
Current speed does not appear.
----- Is there anything on the contact of the main unit or of the bracket?
----- Wipe the contact clean.
----- Is the distance between sensor and magnet too far?
----- Are the marking line of the sensor and the center of magnet matched each other?
----- Refer to "Sensor/Magnet Mounting" and re-adjust correctly.
----- Is the wire broken?
#169-6168
Bracket Sensor Kit for Aero Bar
----- Replace the Bracket & Sensor part with a new one.
Transmission signal loss in damp or wet conditions.
----- Water or condensation may collect between the bracket sensor and the computer causing an
interruption in the data transmission. Wipe the contacts with dry cloth. Contacts can also be
treated with a water repellent silicon jell from an automotive parts or hardware store. Do not use
industrial water repellent; it may damage the bracket.
When the S/S button is pressed, the unit doesn't activate or stop.
----- Is the unit in the Auto function?
#169-6167
Center Mount Bracket Kit
----- The S/S button doesn't function in the Auto function.
MAINTENANCE/PRECAUTIONS
•
•
•
Do not leave the main unit exposed to direct sunlight when the unit is not in use.
Do not disassemble the main unit, sensor and magnet.
#169-6169
Bracket Sensor Kit for Aero Bar
Don't pay too much attention to your computer's functions while riding! Keep your eyes on the
road and duly consider to traffic safety.
•
•
Check relative position of sensor and magnet periodically.
For cleaning, use neutral detergent on soft cloth, and wipe off later with dry cloth. Do not apply
paint thinner, benzine, or alcohol, to avoid damages on the surface.
If there is mud, sand or the like clogs between the button and the body, the movement of the
button may be disturbed. Softly wash away such objects with water.
•
#169-9731
SPECIFICATIONS
Applicable Cycle Sizes
Heavy Duty Wire and Bracket Sensor Kit
130cm - 229cm
Applicable Fork Diameter 11ø - 36ø (S:11 - 26ø L:21 - 36ø)
The length of the wire
Power Supply
Battery Life
70cm
Lithium Battery (CR1620/CR1616) x 1
Approx. 3 years(The life of the first factory-loaded battery may
be shorter than this period.)
#169-6170
Dimension/Weight
Controller
Display
1-15/16" x 1-25/32" x 5/8" (49 x 45 x 16 mm) / 0.74 oz (21 g)
4-bit 1-chip Microcomputer (Crystal Controlled Oscillator)
Liquid Crystal Display
Attachment Kit
Sensor
No Contakt Magnetic Sensor
Operating Temperature Range 0°C - 40°C(32°F - 104°F)
*
The specifications and design are subject to change without notice.
LIMITED WARRANTY
1-Year Warranty for Main Unit Only
#169-6280
Universal Sensor Band
(Accessories/Attachments and Battery Consumption excluded)
If trouble occurs during normal use, the part of the Main Unit will be repaired or replaced free of charge. The service must be
performed by Cat Eye Co., Ltd. To return the product, pack it carefully and remember to enclose the warranty certificate with
instruction for repair. Please write or type your name and address clearly on the warranty certificate. Insurance, handling and
transportation charges to our service shall be borne by person desiring service.
CO.,LTD.
(Address for service)
#166-5120
#169-6180
2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546 Japan
Attn.: CAT EYE Customer Service Section
Wheel Magnet
Lithium Battery (CR1620)
Service & Research Address for United States Consumers:
CATEYE Service & Research Center
1705 14th St. 115 Boulder, CO 80302
Phone:
Fax:
303-443-4595
303-473-0006
Toll Free:
e-mail: [email protected]
800-5CATEYE
|