OPERATION MANUAL
IWC-25A INDUCTION WOK COOKER
240V, 60Hz, 2.5KW
Cecilware Corporation
43-05 20th Avenue
Long Island City, NY 11105
Tel: 800.935.2211, 718.932.1414
Fax: 718.932.7860
Technical Support
Customer Service:
BUILT-IN SAFETY DEVICES
Overtime Detector
If wok pan is left on the induction wok cooker for more than 2 hours, or if the user does not operate
any functions for more than 2 hours, the induction wok cooker will automatically shutoff.
Automatic Safety Shut-Off
If the induction wok cooker is left on for more than 60 seconds without a wok pan in place, the unit
will automatically shutoff.
Material Compatibility Detector
If the wok-pan material or dimensions aren’t suitable for this induction wok cooker, the Heating
Indicator Light won’t light-up.
Small Object Detector
The induction wok cooker will not recognize any objects or utensils smaller than 2” (5 cm) in
diameter. For best results, please use the recommended 13.78” (35 cm) multi-ply wok-pan which
can be purchased from your induction wok supplier or Cecilware.
Overheating Protection Device
If the woks temperature becomes too high, the Over Heating Protection Device is activated & the
induction wok cooker may stop heating. The unit will work normally again after the temperature is
reduced.
HOW DOES YOUR INDUCTION WOK WORK?
A high frequency (20-35KHz) induction coil is located underneath the surface of the
ceramic top plate. It heats the cooking pan through magnetic friction. The heat is
produced directly within the wok. It's controlled by an electronic circuit to offer superior
performance and function. During cooking, there is no energy lost between the cooker
and the food. Cooking stops when you switch the power off.
PRECAUTIONS BEFORE USING YOUR INDUCTION WOK
1. The glass top is made of strong, hard, and non-porous properties. But, in case of breakage,
even if it's only slightly cracked, disconnect the appliance from the outlet immediately and
contact the after-sales service.
2. The appliance is equipped with a Small Object Detector. It is recommended not to place
metal kitchen utensils, pan lids, knives, or other small metal objects on the induction heating
zone. If the inductor is switched on, there is a risk of the objects becoming hot.
3. When using your induction wok cooker, don't place any magnetic objects on the glass wok top,
such as credit cards, cassettes, etc.
4. Scientific tests have shown that the induction hob presents no danger for a person using a
pacemaker. Please keep a 2’ distance from the unit while the induction wok cooker is in use
anyway.
5. To prevent from overheating, do not place aluminum-foil or an iron plate on the wok top.
6. To prevent an electric shock, do not put any articles like iron wire or tools into the air entrance
or outlet.
7. Immediate clean up is recommended when water is left on the top plate.
OPERATION INSTRUCTION
1. Plug power cord into 240V dedicated circuit.
2. Turn on power by pushing the power on / off key, power level display LED will light on.
3. Put a suitable / recommended wok-pan in the middle of the induction wok cooker.
4. Rotate the rotary knob to select power level: Level 1 (minimum) to Level 9 (maximum).
5. The Heating Indicator Light will indicate if the wok pan is suitable or not. If the light is on,
then the wok is heated. If the light is off, it indicates that the power is on, but no wok or no
suitable wok is on the glass top.
6. This unit is equipped with an Over Heating Protection Device, which will stop power
temporarily. Should this occur, the Heating Indicator Light will flash to indicate the Over Heating
Protection function is on. Then, if it lasts for more than 60 seconds, then the induction wok
cooker will automatically shutoff.
CONTROL PANEL,
2
3
1
4
1. POWER on/off button
2. HEATING Indicator Light
3. POWER LEVEL indicator (showing from 1 ~ 9 power levels)
4. ROTARY KNOB to select power levels
FEATURES & DESCRIPTION:
MODEL# IWC-25A
1
2
5
8
6
3
7
10
4
9
1. 2500 watt Induction Wok
2. Ceramic Wok Top
3. Stainless Steel Cabinet
4. Rotary Knob
5. Heating Indicator Light
6. Power on/off key
7. Air-Intake
8. Air-Outlet
9. Foot Stand
10. Digital Display (shows power levels 1 to 9)
SPECIFICATION:
Model No.
Voltage
IWC-25A Induction Wok
240V ~ 60Hz
Vitro-Ceramic Wok
Diameter: approx. 12.75”
Max. 2,500watt
Electrical Power
Consumption
Safety Device
z
z
z
z
z
z
Over Time Protector (2 Hrs.)
Automatic Safety Shut-Off
Material Compatibility Detector
Small Object Detector
Overheating Protection Device
IC Auto Reset.
Dimension
15.16” x 16.61” x 6.30” (including rubber-foot stand)
38.5cm x 42.2cm x 16cm (including foot stand
height)
TROUBLE SHOOTING
1. If your induction wok cooker seems to be working improperly, it doesn't necessarily mean it's
faulty. In all cases, check the below points.
2. If you fail to identify the problem, contact the after-sales service immediately.
Problem
Resolution
No indication light when power "on"
Cable/terminal block is loose
Tripped circuit or fuse; or automatic switch in your house
Power supply stopped
Heating indicator does not light-up,
Appliance fails to heat up
Unsuitable cooking utensil
Utensil is located at the center properly
Utensil is smaller than 5cm
Over-heating protection is activated
Temperature became too high
Appliance suddenly stops heating
during Operation
Air entrance or outlet blocked
Over-heating protection activated
Cecilware Corporation
43-05 20th Avenue
Long Island City, NY 11105
Tel: 800.935.2211, 718.932.1414
Fax: 718.932.7860
Technical Support
Customer Service:
|