Troubleshooting
• If the unit is not functional – check main power supply is ‘on’and check fuses.
• If the unit is functional but lamp the strobe does not light - strobe lamp may require replacing.
• If after trying this solution you still have a problem contact your dealer or CHAUVET.
Contact Chauvet
USA
Tecnical Assistance: 1-800-762-1084 (954) 929-1115
E-Mail [email protected]
Caution
No user serviceable parts inside, please refer to CHAUVET for service.
Strobe Controller
Power Connections
The unit is supplied with a power plug appropriate to its voltage and destination. Should any other
connections be required they must be carried out with the following configuration.
CH-751
Earth = Green/Yellow cable
Neutral = Blue cable
Live = Brown cable
In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection.
In the UK, it is required that all mains plugs are fitted with 5Afuses.
User Guide
Technical Specifications
Please read these instructions carefully befor use
120V~60Hz AC
20mm Glass 1AFast Blow
None
230V~50Hz AC
20mm Glass .5AFast Blow
None
165 x 89 x 76mm / 6.5 x 3.5 x 3in
.67kg / 1.5lbs
165 x 89 x 76mm / 6.5 x 3.5 x 3in
.67kg / 1.5lbs
User Informtion (Please complete for your records)
Date Purchased:
Dealer Stamp
/
/
Serial No: ________________
Model: CH-751 STROBEController
|