Coleman Outdoor Fireplace 5059 707 User Manual

®
FOLLOW INSTRUCTIONS AND WARNINGS TO AVOID FIRE,  
SERIOUS INJURY OR DEATH.  
Assembly and Instruction Sheet  
for 33” Square Fireplace  
Models 5059-707 & 5059A720  
WARNING  
• Outdoor use only. Never use in enclosed area. Use in unventilated areas  
will endanger your life.  
• Keep away from all combustible materials including gasoline and other  
flammable liquids and vapors.  
• Use on a level, noncombustible surface only. Keep away from house,  
garage, balconies, or eave overhangs.  
• Keep out of the reach of children.  
• Be sure screen is in place while in use and do not use in windy conditions.  
• Do not overfill firebox or use to burn leaves and trash.  
• Exercise the same care you would with an open fire.  
• Never leave unit unattended when hot or in use.  
• Completely extinguish fire before leaving.  
• Use gloves when handling or moving. Ashes can remain warm for a long  
time after extinguishing.  
• Dispose of cold ashes properly.  
• Do not modify in any way nor use with parts not expressly approved by  
Coleman.  
• Combustion by-products produced when using this product contain  
chemicals known to the State of California to cause cancer, birth defects,  
Follow these instructions for assembly and read carefully, particularly the  
safety statements. The safety alert symbol,  
is a universally recognized  
symbol used to identify safety information about hazards that can result in  
personal injury. When this symbol is used you should pay very close atten-  
tion to what is written. Review these instructions before beginning assembly  
or using your fireplace.  
or other reproductive harm.  
Contact local authorities regarding possible burn restrictions before using product.  
Fireplace Parts Check List  
Assembly (cont.)  
• Check package for all parts needed for assembly.  
3. Place Firebox Support Ring on top of Leg Brackets as shown. Carefully  
6. Grate  
1. Firebox  
align holes as shown.  
7. Leg Brackets  
8. Hardware Kit w/handle  
9. Screen Assembly  
2. Leg Support Ring  
3. Firebox Support Ring  
4. Protective Cover  
5. Screen Lifting Tool  
Align  
holes  
Firebox Support Ring  
3
1
2
8
9
Leg Bracket  
4
5
4. Insert long bolts and secure with nuts. Tighten all bolts in Leg Support  
Ring and Firebox Support Ring.  
6
7
• Check all items for shipping damage. Call Coleman at 1-800-835-3278 or  
TDD: 316-832-8707 if you have any problems.  
Assembly  
1. Carefully unpack all parts from shipping box.  
2. Align holes in Leg Bracket and assemble to Leg Support Ring as  
shown. Attach with small bolts and nuts. Hand tighten.  
Leg  
Bracket  
Tighten all  
bolts  
Leg Support  
Ring  
(continued on other side)  
 

Coleman Tent 2000005748 User Manual
Compur Carbon Monoxide Alarm 501 IR User Manual
Craftsman Yard Vacuum 24777011 User Manual
Desa Outdoor Fireplace VSGF36NRA User Manual
EAW Portable Speaker AS422e User Manual
Electro Voice Portable Speaker ECS 12 2 User Manual
Electro Voice Speaker System FRX+660 User Manual
Escali Scale Aqua User Manual
Fellowes Paper Shredder DS 500C User Manual
Genesis Advanced Technologies Cordless Drill GHD1260 User Manual