Coleman Tent 2000001593 User Manual

TM  
MONTANA 6 TENT  
MODEL 2000001593  
• For best results in windy conditions, position narrow end of  
tent into the wind.  
Before you begin  
Read all instructions before set up.  
• Enlist the help of at least one other person to assist you when  
it is time to assemble the tent.  
• Select a level site clear of rocks, branches, and other hard or  
sharp objects, to install your tent.  
WARNING: Keep clear of overhead power lines.  
• Do not set up your tent under trees because of potential  
lightning strikes or falling tree limbs in inclement weather.  
• Secure with all stakes and guylines provided to prevent  
property damage or personal injury.  
Pole Descriptions  
Pole  
Pole  
Pole  
Description  
Qty. Dia.  
Repair Kit Replacement Kit  
Main Body Pole, black  
Side Body Pole, grey  
Rainfly Pole, black  
2
2
1
9.5mm 501000540  
9.5mm 501000540  
9.5mm 501000540  
501000548  
501000548  
501000548  
Fig. 1  
Sleeves with Black Trim  
To Set Up Tent  
1. Unfold tent and spread out on a clean, level surface with  
the door facing the desired direction. (Fig. 1)  
Sleeve with  
Grey Trim  
Black, Shock-corded  
Main Body Poles  
2. Assemble all poles by interlocking the shock-corded,  
sections together.  
Sleeve with  
Grey Trim  
Door  
3. Insert grey Side Body Poles through the grey trimmed  
sleeves on both sides of tent; then insert black Main  
Body Poles through black trimmed sleeves, in center of  
tent, forming a “X”. Make sure black Main Body Poles  
overlap the grey Side Body Poles. (Fig. 1)  
Front of Tent  
Grey, Shock-corded Side Body Poles  
4. Insert end of each black Main Body Poles & grey Side  
Body Poles into pins. (Fig. 2 & 2A)  
5. Go to opposite end of each pole and gradually apply  
pressure to each forming arches. Insert the pin into each  
pole end at the sides and corners of tent. (Fig. 2 & 2A)  
6. Attach frame clips along edges of tent to the black Main  
Body Poles & grey Side Body Poles. (Fig. 2B)  
7. Stretch tent until taut, then secure metal loops located  
on both sides and web loops located at four corners  
of tent with stakes. (Fig. 2C)  
2B  
2A  
Door  
2C  
Fig. 2  
Rainfly Sleeve  
Black Rainfly  
Pole  
To Attach Rainfly  
1. Insert black Rainfly Pole with through sleeve in  
underside of Rainfly. (Fig. 3)  
Door  
2. Drape Rainfly over tent with Rainfly Pole centered  
above front door & the green vestibule flaps located  
in the front. (Fig 4).  
3. Insert end of each black Rainfly Pole into pin on either  
side of front door. (Fig. 4 & 4A)  
4. Go to opposite end of Rainfly Pole and gradually apply  
pressure to form an arch. Insert the pin into pole end at  
other side of the door. (Fig. 4 & 4A)  
Fig. 3  
Fig. 4  
Rainfly  
Black  
Rainfly  
Pole  
5. Locate all hook & loop fasteners on underside of  
rainfly and wrap around black and grey poles to secure.  
(Fig. 4B)  
6. Stretch elastic straps and hook clip on each to the  
metal loops at the front and back of the tent. (Fig. 4C)  
4B  
4A  
4C  
(continued on other side)  
 

Compaq Portable CD Player PM 1 User Manual
Conair Hair Dryer 121NP User Manual
Cooper Lighting Indoor Furnishings 1512 User Manual
Danby Dehumidifier APAC9036 User Manual
Delta Electronics Power Supply Q48DR User Manual
Desa Water Heater CPVSA18R CPVSA24R User Manual
Edifier Enterprises Canada Speaker System R401 User Manual
Elation Professional Car Seat 419 User Manual
Elation Professional Work Light PRO FS User Manual
Gitzo Camcorder Accessories GT2931 User Manual