IDC Icemaker Adapter Kit Installation Instructions
INSTALLATION INSTRUCTIONS
IDC ICEMAKER ADAPTER KIT FOR P/N 629088662
1.
Place bar into 1st set of pockets inside
the ice bin, gasket side up.
2.
Hook cross braces over top of bar and
back of ice bin such that they fit down
inside the outer pockets of the ice bin.
Place gasket side up.
Icemaker
Adapter Kit
3.
4.
5.
Place Icemaker Adapter Kit on top of
unit.
Place icemaker on top of kit. DO NOT
slide icemaker into position on the lid.
Cross Braces
(Gasket side
up)
Apply continuous bead of NSF
international (NSF) listed silastic
sealant (Dow 732 or equivalent),
supplied in kit, to seal the icemaker to
the top of the adapter kit. All excess
sealant must be wiped away
immediately.
Bar (Gasket
side up)
6.
Drill 9/64” diameter holes, using one of
the two supplied brackets as a
template, into the rear of the icemaker
and the rear of the icemaker adapter
kit. USE EXTREME CARE NOT TO
DRILL INTO ANY ICEMAKER
COMPONENTS!!! Secure the icemaker
to the adapter using the screws and
brackets provided.
FIGURE 1
Revision Date: January 17, 2008
© 2005-2007, IMI Cornelius Inc.
Revision: D
- 1 -
Publication Number: 629088662INS
|