GET READY TO USE YOUR MC100E MODEM
Thanks for purchasing an MC100E Modem.
ACTIVATE YOUR MODEM
A wireless broadband data plan must be activated on your MC100E modem.
HOW TO INSTALL YOUR MODEM
The MC100E is designed to be used exclusively with compatible CradlePoint routers
and adapters.
QUICK START GUIDE
MC100E
In combination with supported CradlePoint routers and adapt-
ers, the MC100E modem provides your business with fully-
integrated 3G/EVDO internet access.
The process of initiating a carrier plan with your modem is called Activation.
Wireless broadband data plans are made available from wireless carriers, such as
Sprint and Verizon, and are required to allow your modem to connect and transfer
data on their network.
For a complete list of compatible products, visit www.cradlepoint.com/mc100e
The MC100E is a plug-and-play device. Simply attach the modem to the CradlePoint
product and connect. The modem will connect if 3G/EVDO or 1xRTT technology
is available in your area.
This secure, theft-deterrent solution keeps your locations on-line
with the benefit of wireless broadband internet access.
Business-Grade
3G/EVDO Modem
Your modem may already be activated. Check with your vendor for status and
follow their advice, if needed.
1) Turn the compatible CradlePoint product OFF.
with
Enhanced Security,
Performance
2) Align the MC100E USB plug with the appropriate USB port on the
If your modem is not yet active or your vendor is unable to activate the modem,
CradlePoint router or adapter.
3) Connect the MC100E to the CradlePoint product, pressing on both
and Reliability
EASY INSTALL
Install and use your MC100E in four easy steps:
the MC100E and the product.
for full technical support, register your product:
4) Turn the CradlePoint product ON with the MC100E attached.
1) Activate your MC100E EVDO wireless broadband data plan
2) Plug the MC100E modem into a compatible CradlePoint product
3) Update your CradlePoint product firmware (if needed)
4) Fine tune the MC100E location for optimal 3G/EVDO signal strength
Watch for the USB #2 modem LED to illuminate on the router or adapter.
With 3G/EVDO signal coverage, you’re now ready to access the internet!
for additional information, visit:
to receive support, register your product:
© 2011 CradlePoint, Inc. All rights reserved. CradlePoint is not responsible for omissions or errors in typography or photography. CradlePoint, WiPipe™,
and the WiPipe logo are trademarks of CradlePoint, Inc. in the US and other countries. Other trademarks are property of their respective owners.
2
3
4
170550-000
UPDATING ROUTER or ADAPTER FIRMWARE
You may need to update your CradlePoint router or adapter firmware to support
the MC100E modem. To update your product, follow the steps below.
WARRANTY INFORMATION
CradlePoint, Inc. warrants this product against defects in materials and workmanship to the original
purchase (or the first purchaser in the case of resale by an authorized distributor) for a period of one
(1) year from the date of shipment. This warranty is limited to a repair or replacement of the product,
at CradlePoint’s discretion.
REGULATORY STATEMENTS
IMPORTANT NOTE:
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
FCC RADIATION EXPOSURE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
This equipment compiles with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator
and your body.
HOW TO DOWNLOAD FIRMWARE
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try and correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / television technician for help.
Within thirty (30) days of receipt should the product fail for any reason other than damage due to
customer negligence, purchaser may return the product to the point of purchase for a full refund of
the purchase price.
1)
2)
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Select your product from the list and download the most recent firmware file to your desktop.
Due to the essentially high output power nature of WiMAX device, use of this device with other trans-
mitters at the same time may exceed the FCC RF exposure limit and such usage must be prohibited
(unless such co-transmission has been approved by FCC in the future).
HOW TO UPDATE FIRMWARE (when connected to a CBA750)
If the purchaser wishes to upgrade or convert to another CradlePoint, Inc. product within the thirty (30)
day period, purchaser may return the product and apply the full purchase price toward the purchase
of the other product. Any other return will be subject to CradlePoint, Inc.’s existing return policy.
1)
2)
3)
Connect your computer to the CradlePoint adapter with an Ethernet cable.
When prompted for your password, type the six characters of your MAC address
found on the adapter product label.
FCC Caution: Any changes or modifications not expressly approved by CradlePoint, Inc. could void the
user’s authority to operate the product.
4)
5)
6)
7)
Select TOOLS on the top navigation bar, then FIRMWARE in the left menu.
Find MANUALLY UPGRADE FIRMWARE and click the BROWSE button.
Select the firmware file you saved to your desktop and click OPEN.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Click the UPLOAD button. Wait a moment while your firmware is updated and the product reboots.
5
Download from Www.Somanua6ls.com. All Manuals Search And Download.
7
8
|