™
®
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Delfield
Approved _______________________________
Date ____________________________________
ST4472N Salad Top
Front-Breathing Self-Contained Compact Salad Top Refrigerators
Models
•
•
ST4472N-12
Two section with doors twelve pan capacity
STD4472N-12 Two section with drawers twelve pan capacity
Options &
Patented air screen ensures product stays cold without
Standard Features
•
•
drying it out
Accessories
All 4400 Series units are 100% front breathing, which allows
the unit to be pushed against a wall or built into a cabinet or
an existing line up
Durable, rugged stainless steel sides, top and front
Features Delfield’s exclusive ABS interior (on sides). ABS
is extremely durable - it won’t dent, chip or corrode and is
backed by a limited lifetime warranty
Delfield supplies 1/6 size pans and adapter bars for top
opening
Salad top refrigerators are standard with 10” wide,
dishwasher safe polyethylene cutting board treated with
anitmicrobial agent
“D” prefix models feature Delfield’s new drawer system.
Drawers are backed by
assembly
Environmentally friendly R404A refrigerant
High density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane keeps
energy costs low
•
•
•
•
•
•
•
•
•
Flat lift off cover
18” wide single tier overshelf
Stainless steel finish on back
Plastic laminate on front
Additional wire shelves
Door lock
•
•
•
•
Exterior thermometer
Glass door(s)
•
a
10-year warranty on the track
*220V/50Hertzelectricalsystem
*Inclusion of this option will
alter electrical specifications
of the unit.
•
•
STD4472N-12
•
•
•
•
•
Black recessed quick grip handle
Standard on 2” casters for easy cleaning and installation
7’ cord and plug supplied
Cord spring relief - prevents cord rollover
One epoxy coated wire shelf standard, installed per door
section
•
•
•
ACT solid state electronic control
"ST" models have a 4" stainless steel backsplash
One year parts and 90 day labor standard warranty.
Specifications
Exterior top is one-piece 22-gauge stainless steel with integral 2.12”
ACT control. ACT electronic, solid state control, mounted on the exterior
rear of the cabinet, allows unit to maintain precise temperatures in heavy
duty conditions.
(5.1cm) square nosing at the front. Top has openings to accept 12 or 18
1/6-size 4”- 6” (10.2cm
-
15.2cm) deep plastic pans. Adapter bars and 1/6
pans are supplied by Delfield. Temperature in top opening to maintain
33°F (1°C) to 41°F (5°C), with pans recessed 2.5” (6.4cm) at 86°F ambient
room temperature, meeting NSF 7 requirements. One 72” x 10” x .5” (183cm
Electrical connections are 115 volt, 60 Hertz, single phase. Unit has
a
7’
(2.1m) long electrical cord and NEMA 5-15P plug.
x
25.4cm
x
1.3cm) polyethylene cutting board treated with antimicrobial
Casters: Equipment is mounted on 2” (5.08cm) diameter casters, with front
agent is mounted on the top at the front edge.
three locking. Equipment clearance above the floor is 2.5” (6.35cm).
Exterior back and bottom are two-piece 24-gauge galvanized steel.
The following applies to three door models only
Exterior ends are stainless steel.
Doors have
a
24-gauge stainless steel exterior, with thermoformed ABS
Interior sides are thermoformed ABS plastic with shelf supports. Base is
fully insulated with high-density foamed in place environmentally friendly,
Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP
(Global Warming Potential) polyurethane.
plastic interior liner. Cabinet has one adjustable epoxy-coated wire shelf
per door opening.
The following applies to six drawer models only. Drawer fronts have
24-gauge stainless steel exterior, with thermoformed ABS plastic interior
liner. Drawer frames and slides are 12-gauge stainless steel. Drawer slides
are 11-gauge stainless steel with Delrin bearings. Each section has two
drawers. Each top drawer holds one full size 12” x 20” (30.5cm x 50.8cm) pan
and three 1/9 size pans 4” - 6” (10.6cm -15.2cm) deep. Each bottom drawer
a
Refrigeration system uses HFC-404A refrigerant. Compressor is 1/2 H.P.,
with condenser coil and condensate evaporator mounted on rear of the
cabinet. Evaporator coils and temperature control are located on the
interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary
tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F
(2°C to 4°C).
holds one 12” x 20” (30.5cm
x
50.8cm) pan 4” (10.6cm) and three 1/9 size
deep pans. Pans supplied by others.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
|