Delhi Industries Blower DSQ D 10 User Manual

DSQ-D SERIES - DIRECT DRIVE SQUARE INLINE BLOWERS  
OPERATION INSTRUCTIONS AND PARTS MANUAL  
MODELS: DSQ-D-10, DSQ-D-12, DSQ-D-13, DSQ-D-15  
General Safety  
Rotating parts on fans should not be exposed. Where these components are not protected by ductwork,  
cabinets or covers, appropriate guards should be employed to restrict exposure to rotating parts. Access  
doors should not be opened with the fan operating to avoid foreign objects being drawn into the system. On  
initial start-up a careful inspection should be carried out to ensure no foreign material is present which could  
become airborne in the system.  
Read installation and operation instructions carefully before attempting to install, operate or service Delhi  
DSQ-D Series Blowers. Failure to comply with instructions could result in personal injury and/or property  
damage. Retain instructions for future reference.  
Customer supplied  
suspension rods (4)  
Suspension Mount  
Install 4 supplied angle iron mounting  
brackets on upper cabinet front &  
rear or sides (illustrated)  
Model  
Motor  
Weight (lbs.)  
Fig. 1  
DSQ-D-10  
DSQ-D-12  
DSQ-D-13  
1/4 HP 120V 60 Hz  
1/2 HP 120V 60 Hz  
3/4 HP 120V 60 Hz  
55  
77  
Base Mount  
4 angle iron mounting brackets are supplied  
on the cabinet bottom (illustrated).  
86  
DSQ-D-15 1-1/2 HP 120V 60 Hz  
115  
General  
Inspect unit for damage, report any shipping damage to carrier. Check all fasteners, re-tighten as required.  
Rotate the blower wheel by hand to ensure free rotation. If rubbing occurs, loosen the inlet venturi bolts,  
re-position the venturi to establish clearance, re-tighten bolts.  
Installation (Fig. 1)  
The 4 angle brackets provided allow for base or suspension mounting.  
Suspension Mounting  
For suspension mounting, move the 4 angle iron mounting brackets to the four upper corners (front & rear or  
both sides) using the hardware provided, secure the unit to 4 customer provided suspension rods.  
Base Mounting  
For base mounting, 4 angle iron mounting brackets are supplied in the four lower corners (front & rear or both  
sides) secure these to the customer supplied base.  
Vibration isolation (not included).  
Recommended (spring or rubber) for both suspension or base mount.  
 

Continental Electric Fan CE27204 User Manual
Craftsman Saw 11329931 User Manual
Crate Amplifiers Musical Instrument Amplifier BV 50H User Manual
Cub Cadet Blower BB40 User Manual
Curtis Hot Beverage Maker TCC1 User Manual
Cypress Computer Hardware CY62157CV30 User Manual
Dell Server C2100 User Manual
EarthStone Oven 110 Modular User Manual
Electro Voice Portable Speaker MTH 25 64B User Manual
Electro Voice Speaker System FRX+660 User Manual