Electro Voice Speaker EVF 1122S 99 FG User Manual

EVF-1122S/99-FG  
Single 12” Two-Way  
90° x 90° Full-Range  
Fully-Weatherized  
Loudspeaker System  
Key Features:  
Fully Weatherized Fiberglass Finish with Gland  
Nut and Stainless Steel Grille  
ND2B 2” (51mm) Diaphragm, 1.4” (36mm) Exit  
Pure Titanium Compression Driver  
SMX2121 12” (305mm) LF Transducer with Fully  
Symmetric Drive  
Advanced 4th Order Crossover Network with HF  
Protection  
Coverage Pattern: 90° x 90° Constant  
DirectivityTM 12” Rotatable Waveguide  
98 dB Sensitivity, 131 dB Maximum SPL  
System Rating: 500W Continuous, (2000W Peak)  
Active Rating: LF400W/HF40W Continuous  
(1600W/160W Peak)  
(22) M10 Threaded Suspension Points  
General Description:  
Technical Specifications:  
The Electro-Voice® EVF-1122S/99-FG is a fully-weatherized, fiber-  
glass-coated, high power, 2-way loudspeaker system that can be  
used in a variety of applications where high quality sound reinforce-  
ment is required in a compact, lightweight package.  
Freq. Response1 (-3 dB): 118 Hz - 16 kHz  
Freq. Range1 (-10 dB): 58 Hz - 19 kHz  
Rec. Hipass Frequency: 65 Hz  
Axial Sensitivity: 98 dB (1W/1m)  
Max. Calculated SPL: 131 dB  
The EVF-1122S/99-FG utilizes the ND2B, a high output 2” titanium  
compression driver, coupled to a Constant Directivity™ 90° x 90°  
waveguide. The SMX2121 12” woofer used FEA optimization for  
motor, suspension, and electrical design for very low distortion,  
high efficiency, and maximum intelligibility at high SPL levels. The  
crossover uses steep 24 dB/octave slopes with equalization for  
very smooth response in vocal range, linear off-axis response, and a  
protection circuit for long term reliability.  
Horizontal Coverage: 90°  
Vertical Coverage: 90°  
Power Handling: 500W Continuous, 2000W Peak  
LF Transducer: SMX2121, 12 in (305mm) Driver  
HF Transducer: ND2B, 2 in (51mm) Diaphragm  
Compression Driver  
The EVF-1122S/99-FG features make it ideal for many fixed install  
applications, including applications with full exposure to outdoor  
elements. The trapezoidal enclosure is constructed out of weather  
resistant birch, and coated with fiberglass for maximum protection  
from extreme outdoor elements. The unique acoustic and rigging  
design allows for vertical and horizontal clusters to be built using  
any combination of loudspeakers from the entire EVF & EVH Series,  
with 7 horn patterns to choose from and an assortment of Low Fre-  
quency and subwoofer loudspeakers, it gives you the tools to maxi-  
mize flexibility of system design, no matter what the application and  
budget. The innovative input panel provides phoenix style connec-  
tors (included in all standard models) and gland nut cover plate (for  
weatherizing applications). An externally accessible jumper selects  
passive or active operation. An available 70.7/100 Volt transformer  
kit simply mounts to the input panel for use in distributed systems.  
All these features give you the flexibility to do a large range of  
venues in extreme environments with fewer items in inventory and  
quickly support your customer’s requirements.  
Crossover Frequency: 1450 Hz  
Nominal Impedance: 8 Ohms  
Minimum Impedance: 6.0 Ohms  
Connectors: (2) 4 Contact 10 AWG Phoenix/  
EuroBlock Style Screw Terminal,  
Gland Nut with Input Panel Cover  
Included for Weatherizing  
Enclosure Material: 13 Ply Weather Resistant Birch,  
Fiberglass Finish  
Grille: 18 GA Stainless Steel with Hydropho-  
bic Cloth and Rotatable Logo  
Suspension: (22) M10 Threaded Points  
Dimensions (H x W x D): 30.26” x 16.00” x 16.27”  
(768.6mm x 406.3mm x 413.3mm)  
Net Weight: 63.1 lb (28.6 kg)  
Shipping Weight: 73.4 lb (33.3 kg)  
1 Half Space Measurement.  
 
Engineering Data Sheet  
Polar Plots (1/3 Octave):  
400 Hz  
500 Hz  
1.25 KHz  
3.15 KHz  
8 KHz  
630 Hz  
800 Hz  
1 KHz  
2.5 KHz  
6.3 KHz  
16 KHz  
1.6 KHz  
2 KHz  
4 KHz  
5 KHz  
10 KHz  
12.5 KHz  
20 KHz  
Horizontal = Black  
Vertical = Grey  
 
Dimension Drawings:  
End View  
Front View  
Side View  
Rear View  
EVF-1122S/99 Part Numbers  
• PRD000203-001 EVF-1122S/99-BLK, 90° x 90°, Black Finish  
• PRD000203-002 EVF-1122S/99-WHT, 90° x 90°, White Finish  
• PRD000203-003 EVF-1122S/99-PIB, 90° x 90°, Black Finish,  
Weather Resistant  
• PRD000203-004 EVF-1122S/99-PIW, 90° x 90°, White Finish,  
Weather Resistant  
• PRD000203-005 EVF-1122S/99-FGB, 90° x 90°, Black Finish,  
Weather Resistant Fiberglass  
CAUTION  
This EVF Loudspeaker should be suspended overhead  
only in accordance with the procedures and limitations  
specified in the EVF/EVH Users Manual and possible  
manual update notices. This system should be suspended  
with certified rigging hardware by an authorized rigging  
professional and in compliance with local, state, and fed-  
eral overhead suspension ordinances.  
• PRD000203-006 EVF-1122S/99-FGW, 90° x 90°, White Finish,  
Weather Resistant Fiberglass  
Performance Match  
Accessories  
• PRD000199  
• PRD000200  
• PRD000201  
• PRD000202  
• PRD000204  
• PRD000205  
• PRD000206  
• PRD000207  
• PRD000208  
• PRD000209  
• PRD000210  
• PRD000211  
• PRD000212  
• PRD000213  
• F.01U.076.843  
• F.01U.076.844  
• D170469  
EVF-1122S/64, 60° x 40° Coverage  
EVF-1122S/66, 60° x 60° Coverage  
EVF-1122S/94, 90° x 40° Coverage  
EVF-1122S/96, 90° x 60° Coverage  
EVF-1122S/126, 120° x 60° Coverage  
EVF-1152S/43, 40° x 30° Coverage  
EVF-1152S/64, 60° x 40° Coverage  
EVF-1152S/66, 60° x 60° Coverage  
EVF-1152S/94, 90° x 40° Coverage  
EVF-1152S/96, 90° x 60° Coverage  
EVF-1152S/99, 90° x 90° Coverage  
EVF-1121S, 12” Bass Element  
EVF-1151S, 15” Bass Element  
EVF-1181S, 18” Bass Element  
CPS2.9, 120V Power Amplifier, 2 x 900W  
CPS2.12, 120V Power Amplifier, 2 x 1200W  
CPS4.5, 120V Power Amplifier, 4 x 500W  
CPS4.10, 120V Power Amplifier, 4 x 1000W  
• ACC000084-000 CDNL4, Cover Plate, Dual NL4  
• ACC000085-000 CSG, Cover Plate, Single Gland Nut  
• ACC000086-000 CDG, Cover Plate, Dual Gland Nut  
• ACC000087-000 TK-150, 70V Transformer, 150W  
• ACC000089-001 HRK-1B, Horiz. Rigging Kit, EVF, Black  
• ACC000089-002 HRK-1W, Horiz. Rigging Kit, EVF, White  
• ACC000090-001 HRK-2B, Horiz. Rigging Kit, EVF-SUB, Black  
• ACC000090-002 HRK-2W, Horiz. Rigging Kit, EVF-SUB, White  
• ACC000091-001 HRK-3B, Horiz. Rigging Kit, EVH, Black  
• ACC000091-002 HRK-3W, Horiz. Rigging Kit, EVH, White  
• ACC000092-001 VRK-1B, Vert. Rigging Kit, EVF, Black  
• ACC000092-002 VRK-1W, Vert. Rigging Kit, EVF, White  
• ACC000093-001 VRK-2B, Vert. Rigging Kit, EVF-SUB, Black  
• ACC000093-002 VRK-2W, Vert. Rigging Kit, EVF-SUB, White  
• ACC000094-001 VRK-3B, Vert. Rigging Kit, EVH, Black  
• ACC000094-002 VRK-3W, Vert. Rigging Kit, EVH, White  
• D170466  
U.S.A. and Canada only. For customer orders, contact Customer Service at:  
800/392-3497 Fax: 800/955-6831  
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:  
+ 49 9421-706 0 Fax: + 49 9421-706 265  
Electro-Voice®  
12000 Portland Avenue South, Burnsville, MN 55337  
Phone: 952/884-4051, Fax: 952/884-0043  
Other Internatonal locations. For customer orders, Contact Customer Service at:  
+ 1 952 884-4051 Fax: + 1 952 887-9212  
For warranty repair or service information, contact the Service Repair department at:  
800/685-2606  
© Bosch Communications Systems  
09/2009  
For technical assistance, contact Technical Support at: 866/78AUDIO  
Part Number LIT000341599 Rev A  
Specifications subject to change without notice.  
 

Clover Electronics Digital Camera Z670 User Manual
COBY electronic TV Cables HDMI 12 User Manual
Compaq Projector MP1400 User Manual
Craftsman Chipper 247775890 User Manual
Creda Clothes Dryer 5kg User Manual
Desa Tech Electric Heater CCL3018PTA NTA CCL3924PTA NTA CCL3930PTB NTB User Manual
Euro Pro Carpet Cleaner EP922H User Manual
Euro Pro Food Processor FP107 User Manual
GE Air Conditioner ACB AJCH 12 User Manual
Global Machinery Company Saw DB250SMS User Manual