EBH5201-006
Operation Instruction
EBH5201
HDcctv 1080p
Indoor Compact Bullet Camera
EBH5201
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers
since the electromagnetic fields generated from these devices may distort the video image or otherwise
interfere with camera operation.
2. Never disassemble the camera beyond the recommendations in this manual nor
Improper disassembly or
introduce materials other than those recommended herein.
introduction of corrosive materials may result in equipment failure or other damage.
In some circumstances, direct sunlight may
cause permanent damage to the sensor and/or internal circuits, as well as creating unbalanced illumination
beyond the capability of the camera to compensate.
3. Try to avoid facing the camera toward the sun.
4. Keep the power cord away from water and other liquids and never touch the power
Touching a wet power cord with your hands or touching the power cord with wet
cord with wet hands.
hands may result in electric shock.
5. Never install the camera in areas exposed to oil, gas or solvents.
Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
For cameras with interchangeable lenses, do not touch the surface of the sensor directly with the hands. Use
lens tissue or a cotton tipped applicator and ethanol to clean the sensor and the camera lens. Use a damp
soft cloth to remove any dirt from the camera body. Please do not use complex solvents, corrosive or abrasive
agents for cleaning of any part of the camera.
7.
Do not operate the camera beyond the specified temperature, humidity or power source ratings.
This camera is suitable for indoor operation. Use the camera at temperatures within -10°C~50°C (14°F~122°F) and
in an indoor environment; this device is not rated as weather proof. The input power source is 12VDC. The use of
properly fused or Class 2 power limited type supplies are highly recommended.
8. Mounting
Use care in selecting a solid mounting surface which will support the weight of the camera plus any wind,
snow, ice or other loading, and securely attach the camera to the mounting surface using screws and anchors
which will properly support the camera. If necessary (e.g. when mounting to drop ceilings) use a safety wire to
provide additional support for the camera.
4
ATTENTION! This is a class A product which may cause radio interference in
a domestic environment; in this case, the user may be urged to take adequate
measures.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures :
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the users’authority to operate this
equipment.
5
Table of Contents
1. PRODUCT OVERVIEW .................................................................
1.1 FEATURES ..............................................................................................
1.2 ACCESSORY PARTS LIST .....................................................................
1.3 SPECIFICATIONS ...................................................................................
1.4 DIMENSIONS ..........................................................................................
7
7
8
9
10
2. CAMERA COMPONENT DESCRIPTION ......................................
11
3. INSTALLATION .............................................................................
4. OSD Structure..............................................................................
12
14
6
Ch1apter
1. Product Overview
The EBH5201 is an HDcctv indoor bullet camera with Digital Day/Night capability in a compact housing only 1.77" in
diameter and less than 4" long. Based on a 1/3”Panasonic 2.1 megapixel progressive scan sensor and wide angle 2.45mm
megapixel lens for HD 1080p resolution 100% digital images, it delivers vastly superior video quality compared to
traditional CCTV images. This superior resolution not only captures more critical evidentiary information, but the inherent
ability for megapixel video also extends the area of coverage, expedites completion of investigations, resolves complaints
and reduces both capital and operational costs. Designed with 4X Digital Slow Shutter low light enhancement technology,
the EBH5201 can captures color images in low light without ghosting, or it can switch to monochrome mode automatically
in low light environments.
This highly advanced imaging system also incorporates state of the art optical enhancement technologies: Lens Shading
Correction compensates to eliminate artificial shadows caused by attenuation of light as it traverses the outer portions
of the lens; Digital Slow Shutter low light enhancement for optimal low light sensitivity combines with Digital Noise
Reduction (DNR) to maximize image clarity while conserving DVR disk storage space; digital zoom with electronic PTZ to
fine tune field of view; Highlight Suppression (HSBLC) to handle imbalamce due to bright spots in the scene; image flip/
rotate, and much more.
No major upgrade to the IT network is required to deploy this powerful technology; HDcctv cameras communicate at
digital speeds up to 1.5Gb/s over existing or new coaxial cable (RG59 or other types for longer distances), using industry
standard BNC connectors. With its NTSC/analog secondary output to allow convenient aim and focus using a standard
hand held test monitor, full OSD controls, and 94° wide horizontal viewing angle megapixel lens the EBH5201 delivers
flexible, robust coverage in a wide range of low light surveillance applications while delivering stunning HD image quality
1.1 Features
• HDcctv 2.1 Megapixel real time 1920x1080/1280x720 HD video over coax for superlative image detail
• Supports video outputs of 1080p30/25 and 720p60/50 (Field Select)
• Choice of Day/Night operation or Full Color Images in Low Light
• Provides DNR to improve picture clarity while enabling DVRs to improve disk storage utilization
• Flexible mounting and positioning - mount included, or fits any 1/4"-20 mount
• SD TV out for aim and focus using standard hand held test monitor
• 2.45mm megapixel lens captures a 94° wide horizontal field of view
• Easy to use OSD setup menu with an array of options
• Enhanced low light sensitivity through a sensitivity increase setting of up to 4x
• Lens Shading Compensation offsets diminished light transmission through lens periphery
for uniform image illumination
• HSBLC [Highlight Suppression Back Light Compensation] to suppress imbalance due to bright areas in the scene
• Digital zoom increases effective lens magnification up to 20x
• Up to 30 Privacy Zones
• Dead pixel compensation for increased clarity and extended service life
7
1.2 Accessory Parts List
Please be careful when you unpack the box due to the electronics devices inside.
Check and make sure that you have all the items listed below inside the original box:
Camera
Mounting Bracket
Manual
Screws
Service Video Cable
If an item appears to have been damaged in shipment, replace it properly in its carton and notify the
shipper. If any items are missing, notify your EverFocus Electronics Corp. Sales Representative or Customer Service. The
shipping carton is the safest container in which the unit may be transported. Save it for possible future use.
Please Note:
8
1.3 Specifications
Pickup Device
Image Pixels
HDcctv Image Area Dimensions
Sensitivity
1/3” Panasonic 2.1 Megapixel Color Progressive CMOS sensor
1920(H)x1080(V) with 2.75μx 2.75μ pixel size
5.28mm (H) x 2.97 mm(W); ø 6.06 mm area diagonal
0.1 lux/F1.2 (DSS OFF)
S/N Ratio
More than 50dB
Video Format Main Output
HDcctv
Video Resolution/Mode Main Output
Main Output Connector
Video Format Test Output
Test Output Connector
Lens Type
Field Select 1080p30/25, 720p60/50
BNC-F
NTSC/PAL Selectable
Pin connector on board; adapter to BNC supplied
2.45mm Fixed Focal Length
94°Horizontal
FOV Angle
Shutter Speed
Auto / Manual Selectable
OSD
Yes (5-axis joystick control)
D/N Mode
Exposure Control
DSS
Auto, Color, B/W (Electronic D/N)
Automatic Electronic Shutter
Low light boost 2X, 3X, 4X
Lens Shading Compensation
Auto Gain Control
White Balance
On / Off
Variable 0~23dB (23bD=200x)
ATW/Push/Manual/Outdoor/Indoor
Low / Medium / High
DNR
HSBLC
On / Off
Digital Zoom
1X ~20X
Power Source & Consumption
Image Flip
Programable Privacy Zones
Weight
DC12V (+/-10%) @ 160mA
Off/V Flip/H Flip/H+V Flip (Rotate)
30 areas independently adjustable for size, location, color
136.1g/408oz (Camera Only; Mount adds 113.4g/4oz)
Body: 86.7mm/3.41"(L) x Ø44mm/Ø1.77" Diameter(W)
Mount: Ø60mm/Ø2.36" Diameter(W)
[Adds 97.6mm/3.84" max to height]
-10°C~50°C ; 14°F~122°F
Dimensions
Operating Temperature
Operating Humidity
Certifications
20%~80% humidity, non-condensing
FCC/CE
9
1.4 Dimensions
Inches:
1.63"
0.1"-Ø0.14"
MOUNTING HOLE (Top/Bottom)
(1/4"-20 UNC, Depth 0.17")
3.45"
2.95"
MOUNTING HOLE (Top/Bottom)
(1/4"-20 UNC, Depth 0.17")
Ø2.36"
10
Ch2apter
2. Camera Component Description
Service Video Connector
HDcctv Out BNC
OSD Control Joystick
+
-
DC12V Input
Power LED
11
Ch3apter
3. Installation
12
Connections
BNC Female
(HDcctv Jack)
HDcctv DVR or other
HDcctv Signal Equipment
DC12V In
EBH5201
DC12V
Adapter
Handheld
Monitor
*Service Video Connector
NTSC Video In
Test Cable
* NOTE
When installing the camera, make sure that all cable ends and connectors
are protected from humidity and other outdoor environments.
13
Ch4apter
4. OSD Structure
Main
Sub Menu
Sub Menu
SETUP
BRIGHTNESS
0 ~ 20
SHUTTER MODE
SHUTTER
AUTO, MANUAL
1/30(25), 1/60(50), 1/120(100), 1/250, 1/700, 1/1K,
1/1.6K, 1/2.5K, 1/5K, 1/7K, 1/10K, 1/30K.
SPEED
DSS
EXPOSURE
OFF, X2, X3, X4.
0 ~ 23dB
(Digital Slow Shutter)
AGC MAX
INITIAL
RETURN
WB MODE
AUTO / PUSH LOCK / MANUAL
CHROMA
KELVIN
0 ~ 20
LOW, MIDDLE, HIGH
RED GAIN
BLUE GAIN
PUSH AUTO
INITIAL
0 ~ 20
0 ~ 20
-
WHITE BALANCE
RETURN
MODE
OFF, BLC
BLC OSD
OFF, ON
0 ~ 20
0 ~ 20
0 ~ 20
0 ~ 20
BLC X - POSITION
BLC Y - POSITION
BLC X - SIZE
BLC
BLC Y - SIZE
INITIAL
RETURN
D&N MODE
DWELL TIME
AGC THRS
MARGIN
AUTO, COLOR, BW
1sec ~ 10sec
0 ~ 20
DAY & NIGHT
0 ~ 20
INITIAL
RETURN
SHARPNESS
MIRROR
0 ~ 10
OFF, ON
FLIP
OFF, ON
DZOOM(Digital Zoom)
SHADING (LSC)
1X ~ 20X
OFF, ON
IMAGE
Image
HLMASK LEVEL
0 ~ 20
WHITE, YELLOW, CYAN, GREEN
HLMASK COLOR
OFF,ON
MAGENTA, RED, BLUE, BLACK
HLMASK (HSBLC)
INITIAL
RETURN
DNR
OFF, LOW, MIDDLE, HIGH
INITIAL
RETURN
14
4. OSD Structure
Main
Sub Menu
Sub Menu
CAM TITLE
0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K
L M N O P Q R S T U V W X Y Z ! - () < >
CAM TITLE
SPA > >
< < BAK
LOCATION
RETURN
ENGLISH, RUSSIAN, SPANISH,
LANGUAGE
GERMAN, FRENCH, PORTUGUESE
OFF, ON
ZONE NO
0 ~ 29
MASK MODE
OFF, ON
X - POSITION
Y - POSITION
X - SIZE
0 ~ 60
0 ~ 40
0 ~ 40
0 ~ 40
Y - SIZE
PRIVACY
BLACK, WHITE, YELLOW, CYAN, GREEN,
COLOR
MAGENTA,
RED, BLUE
TRANSPARENCY
INITIAL
100%,75%,50%,25%,0%
SPECIAL
RETURN
OFF, ON
RESOLUTION
SENSITIVITY
WINDOW USE
WINDOW TONE
X-POSITION
Y-POSITION
X-SIZE
0 ~ 4
0 ~ 20
ON, OFF
1 ~ 6
0 ~ 60
0 ~ 40
0 ~ 60
0 ~ 40
MOTION DETECT
Y-SIZE
INITIAL
RETURN
CAM TITLE
MOTION DETECT
ZOOM
INITIAL
RETURN
SHADING DET
DEFECT DET
DOUT FORMAT
DOUT FPS
COLOR BAR
INITIAL
OFF, ON
OFF, ON
OFF, ON
DISPLAY
SYSTEM
OFF, ON
OFF, ON
720P, 1080P
50, 60 / 25, 30
OFF, ON
RETURN
FACTORY
DEFAULT
EXIT
15
EverFocus Electronics Corp.
EverFocus Taiwan:
EverFocus Europe - Germany:
Albert-Einstein-Strasse 1, D-46446
Emmerich, Germany
12F, No.79, Sec. 1, Shin-Tai Wu Road,
Hsi-Chih, Taipei, Taiwan
TEL: +886 2 2698 2334
TEL: +49 2822 93940
FAX: +886 2 2698 2380
FAX: +49 2822 939495
EverFocus China - Beijing:
EverFocus China - Shenzhen:
4F, No. 2, D4 Building, Wan Yelong
Industrial Park, Tangtou Road, Shiyan,
Baoan, Shenzhen, Guangdong 518101, China
TEL: +86 755 2765 1313
Room 609, Technology Trade Building,
Shangdi Information Industry Base,
Haidian District, Beijing 100085, China
TEL: +86 10 6297 3336~39
FAX: +86 10 6297 1423
FAX: +86 755 2765 0337
EverFocus USA - California:
1801 Highland Avenue, Unit A, Duarte, CA 91010, USA
TEL: +1 626 844 8888
EverFocus USA - New York:
415 Oser Avenue, Unit S, Hauppauge, NY 11788, USA
TEL: +1 631 436 5070
FAX: +1 626 844 8838
FAX: +1 631 436 5027
EverFocus Japan:
EverFocus Europe - UK:
5F, Kinshicho City Building, 2-13-4 Koto-Bashi,Sumida-Ku,
Tokyo, 130-0022, Japan
Unit 12, Spitfire Business Park,
Hawker Road, Croydon Surrey, CR0 4WD, UK
TEL: +44 (0) 20 8649 9757 / 0845 430 9999
FAX: +44 (0) 20 8649 9907
TEL: +81 3 5625 8188
FAX: +81 3 5625 8189
EverFocus India:
Suite 803, Housefin Bhavan, C-21,
Bandra Kurla Complex, Bandra (East),
Mumbai 400051, India
TEL: +91 22 6128 8700
FAX: +91 22 6128 8705
Ihr EverFocus Produkt wurde
entwickelt und hergestellt mit qualitativ
hochwertigen Materialien und
Komponenten, die recycelt und wieder
verwendet werden können.
Dieses Symbol bedeutet, dass
elektrische und elektronische Geräte
am Ende ihrer Nutzungsdauer vom
Hausmüll getrennt entsorgt werden
sollen.
Your EverFocus product is designed
and manufactured with high quality
materials and components which can
be recycled and reused.
This symbol means that electrical and
electronic equipment, at their end-of-
life, should be disposed of separately
from your household waste.
Please, dispose of this equipment at
your local community waste
Bitte entsorgen Sie dieses Gerät bei
Ihrer örtlichen kommunalen
Sammelstelle oder im Recycling Centre.
Helfen Sie uns bitte, die Umwelt zu
erhalten, in der wir leben!
collection/recycling centre.
In the European Union there are
separate collection systems for used
electrical and electronic product.
Please, help us to conserve the
environment we live in!
|