LED
Power
State
Green
Description
The device is connected to a power source and on.
QuickStart Guide
FortiDB-400B
Flashing Activity on the hard disk.
Geen
Hard Disk
Alarm
Red
Hard disk failure.
Green
The correct cable is connected to the interface and
the connected equipment has power.
Ports 1 to 4 Right LED
Ports 1 to4 Left LED
Flashing Network activity at this interface.
Green
Amber
Off
The interface is connected at 1000 Mbps.
The interface is connected at 100 Mbps.
The interface is connected at 10 Mbps.
USB
400B
CONSOLE
1
2
3
4
Visit these links for more information and documentation for your Fortinet product.
© Copyright 2009 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trademarks
of their respective holders.
Regulatory Compliance
FCC Class A Part 15 CSA/CUS
7 January 2009
15-32000-86800-20090107
Package Contents
Connector
Type
Speed
Protocol
Description
Copper gigabit connection to 10/100/1000 copper networks.
Ports 1 to 4
RJ-45
10/100/1000
Base-T
Ethernet
CONSOLE
RJ-45
USB
9600 8/N/1
RS-232 serial Optional connection to the management computer. Provides access to
the command line interface (CLI).
USB
USB
For future use.
USB
400B
CONSOLE
1
2
3
4
USB
RJ-45 serial
Removable hard disk
Ethernet ports
connection
AC power
connection
QuickStart Guide
Copyright 2009 Fortinet Inco
Trademarks
RJ-45 to
Straight-through
Ethernet cable
Rack-Mount
Brackets
Welcome
|
Bienvenue | Willkommen | 歓
迎
|
Bienvenido
|
Benvenuto
DB-9 Serial Cable
Power Cable
Connecting
Connect the following to the FortiDB unit. Ensure the FortiDB unit is placed on a stable surface or install in a standard 19 inch rack.
•
•
•
Insert one end of an Ethernet cable into port 1.
USB
400B
CONSOLE
1
2
3
4
Connect the other end of the Ethernet cable to the network hub or switch.
RJ-45 to DB-9 serial cable
connects to management
computer
Ethernet cables connect
to computers on the
internal network
Connect the AC Power cable to the Power Supply on the back of the
FortiDB unit.
•
Connect the other end of the Power cable to a surge protected
power bar or power supply.
Power cable
connects to
power supply
Configuration Tools
Command Line Interface (CLI)
Web-based manager
The CLI is a full-featured management tool. Use it to configure the administrator password,
the interface addresses, the default gateway address, and the DNS server addresses. To
configure advanced settings, see the Tools and Documentation CD included with the
FortiDB unit.
The FortiDB web-based manager is an easy-to-use management tool.
Use it to configure the administrator password, the interface and default gateway addresses,
and configure reports.
Requirements:
Requirements:
•
•
An Ethernet connection between the FortiDB unit and management computer.
A web browser such as FireFox or Internet Explorer on the management computer.
•
The RJ-45 to DB9 serial connection between the FortiDB unit and management
computer.
•
A terminal-emulation application such as HyperTerminal for Windows, on the
management computer.
|