FortiMail Unit LED Indicators
Light Icon
Description
The light flashes as log packets are sent and received to and from
the FortiMail unit.
Power indicator.
The light flashes when accessing the boot device.
PS RST
2
1
POWER
ACTIVITY
DISK DRIVE LEGEND
HDD
HDD
HDD
1
2
3
(P0)
(P1)
(P2)
HDD
HDD
HDD
4
5
6
(P3)
(P4)
(P5)
2000A
FortiMail-2000A
© Copyright 2008 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trade-
marks of their respective holders.
Regulatory Compliance
FCC Class A Part 15 CSA/CUS
9 September 2008
06-30004-0355-20080909
Checking the Package Contents
LED indicators:
Power, Error, Network Access
Power
Connections
Back
Ethernet Cables:
Orange - Crossover
Grey - Straight-through
Front
PS RST
2
1
Null-Modem Cable
(RS-232)
2000A
USB ports
for future use
Ethernet
Connections
Ethernet
Connections
DB9 Serial
Connection
Power Cable
Connector
Ports 1 to 4
CONSOLE
Type
RJ-45
DB-9
Speed
Protocol Description
Connection to the network
10/100/1000 Base-T Ethernet
9600 bps RS-232
Q u i c k S t a r t G u i d e
P
S
R
S
T
2
1
Connection to the management computer. Provides
2000A
FortiMail-2000A
access to the command line interface (CLI).
Copyright 2006 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks.
Documentation
Connecting
Connect the FortiMail unit to a power outlet and to the network hub or switch.
Power connections
•
Place the FortiMail unit on a stable surface. It requires 1.5 inches (3.75 cm)
clearance on each side to allow for cooling.
•
•
For rack mounting, the FortiMail unit requires 2U of vertical space.
Plug the power cable into the back of the FortiMail unit, then plug the power
cable into the power outlet.
Null modem cable connects
to serial port on management
computer.
Straight-through Ethernet
cable connects to hub or
switch on the network.
Planning the Configuration
Gateway mode
Transparent mode
In Gateway mode, the FortiMail unit protects your email server by scanning the SMTP traffic
In Transparent mode, the FortiMail unit protects your email server by scanning the SMTP traf-
for viruses and spam messages as it passes through the FortiMail unit.
fic for viruses and spam messages as it passes through the FortiMail unit.
You can configure your firewall or DNS server to ensure that incoming SMTP traffic goes
through the FortiMail unit before reaching the email server. Optionally, you can configure the
email server to use the FortiMail unit as the relay server for outgoing SMTP traffic.
The FortiMail unit provides seamless integration into existing networks. You can place the
FortiMail unit in front of the existing email server without any configuration changes to the
existing network topology, for filtering email messages. This means that all of the FortiMail
interfaces are on the same IP subnet and appears to other devices as a bridge. Alternatively,
you can configure the FortiMail unit as a combination of a bridge and a router by assigning
IP addresses to some of its interfaces. In this situation, the interfaces can be on different
subnets.
The FortiMail unit integrates into your existing network with only minor changes to your
network configuration.
Server mode
In Server mode, the FortiMail unit provides basic email server functionality, supporting
WebMail, SMTP, POP3 and IMAP email protocols. In addition, the FortiMail Server provides
antivirus, antispam, email archiving, logging and reporting services.
|