OPERATING INSTRUCTIONS
FDE/FDG647RF
INTERIOR DRUM LIGHT
2. Check that lint screen is clean and in place.
The REGULAR-HIGH HEAT, PERM PRESS-MEDIUM
HEAT, and KNITS/DELICATES-LOW HEAT temp-
erature settingsmaybe used with anycycle setting. The
AIR FLUFF-NO HEAT setting can be used only in the
Timed Dry cycle.
Versión en español
Si desea obtener una copia en español de estas
Instrucciones de Funcionamiento, sírvase escribir a la
dirección que se incluye a continuación.
Solicite la P/N 131799900.
3. Load the dryer. If desired, add a dryer fabric
softener sheet.
4. Close the dryer door.
5. Set Temperature and Cycle Signal controls.
Spanish Owner's Guides
Frigidaire Home Products
P. O. Box 212378
AIR FLUFF-NO HEAT setting tumbles the load without
heat. Use Air Fluff to freshen clothing, pillows or
blankets, or to dust draperies.
6. Turn cycle selector clockwise to desired
setting.
Augusta, GA 30917
7. Start dryer. Turn the Turn to Start controlclockwise
to ON. Hold for 1-2 seconds and release.
8. When the Cycle Signal control has been turned
on, a signal will sound when the cycle ends. Cycle Selection
9. Remove items immediately and hang or fold.
Before Operating Your Dryer
Read your dryer Owner's Guide. It has important
safety and warranty information. It also has many
suggestions for best drying results.
Turn cycle selector clockwise to desired cycle and
setting.
10. Clean lint screen after every load.
Each cycle ends with a cool down period. The heat
automaticallyturnsoffand the load continuesto tumble
during the cooldown period. Thisreduceswrinkling and
makes items easier to handle during unloading.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer owner's guide
before operating this appliance.
Temperature Selection
Always follow directions on fabric care
labels.
Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.
To avoid fire hazard, do not use heat
to dryitemscontaining feathersordown, foam rubber,
plastics, or similarly textured, rubber-like materials.
Use Air Fluff-No Heat setting only.
Operating Steps
Read Drying Procedures in your Owner's Guide.
It explains these operating steps in detail.
(continued, reverse side)
1. Prepare items for drying.
Printed in U.S.A.
P/N 131799800 (9811)
|