HO97796
90 DAY LIMITED WARRANTY
Jasco Products Company warrants this product to be free from manufacturing defects
for a period of ninety days from the original date of consumer purchase. This warranty
is limited to the repair or replacement of this product only and does not extend to con-
sequential or incidental damage to other products that may be used with this unit. This
warranty is in lieu of all other warranties express or implied. Some states do not allow
limitations on how long an implied warranty lasts or permit the exclusion or limitation of
incidental or consequential damages, so the above limitations may not apply to you.
This warranty gives you specific rights, and you may also have other rights which vary
from state to state. If unit should prove defective within the warranty period, return
prepaid with dated proof of purchase to: Jasco Products Company, 311 N.W. 122nd,
Oklahoma City, OK 73114.
Cordless
Multimedia Keyboard
FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed or
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try and correct the interefence by one or more of the following
measures:
Operation
Manual
Hardware and Software
Instructions
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and the receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
(4) Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compli-
ance could void the user's authority to operate the equipment.
All brand names and products listed/shown are registered
trademarks or trademarks of their respective owners.
Distributed for Thomson Consumer Electronics, Inc. by
Jasco Products Company, 311 N.W. 122nd Street, Oklahoma City, OK 73114.
®
WINDOWS 95/98/ME SOFTWARE INSTALLATION:
Word - Open Microsoft Word
1. Power your computer up and insert 3.5" disk labeled for ”Windows 95/98/ME.“
2. Click ”Start“ with your mouse.
3. Click ”Run“ with your mouse.
4. Click ”OK,“ then proceed to follow the prompts.
Scanner - to launch a designated scanner application
ScanDisc - to call ScanDisc application
®
WINDOWS NT 4.0/2000 (Professional) SOFTWARE
INSTALLATION:
Audio - to call audio application and begin playing CD
®
1. Power up your computer and insert the 3.5” disk labeled 1/1 for Windows NT 4.0/2000.
2. Follow steps 2-4 from above. Please note, software will prompt you to insert disk 2/2 for
®
Windows NT 4.0/2000 to complete loading of necessary files.
Video - to call video application and begin playing a video
Aux - to launch a designated auxiliary
MAINTENANCE:
• Never spray liquid directly onto your keyboard.
• To clean, spray mild cleaning agent onto a soft cloth and wipe surface gently.
Suspend - turns off monitor display and puts the system into power saving mode
after a brief period of activity.
USING THE DIRECT ACCESS MULTIMEDIA/INTERNET KEYS:
The 23 multimedia keys located at the top of the keyboard have designated one stroke func-
tions as shown on the following pages:
®
USING THE WINDOWS 98 POWER KEYS:
®
Power management functions: Windows 98 functions will not work without a
Windows 98 advanced configuration and power interface (ACPI), ATX motherboard
®
and ATX power supply. You must press TURBO key and the the desired key (power,
sleep, wake). This is to help prevent accidental power-down.
Volume
= POWER DOWN
to mute or resume sound from an audio or video CD
Execute “system power down” when buttons are pressed. It powers down the system.
The system power policy manager will look up POWER DOWN button action in the cur-
rent power policy (by default, shutdown) and execute that action. (In some cases
depending on the motherboard you are using, the function “power” can be used for
both power on and power off).
Volume Down
Volume Up
= SUSPEND
to set media back one track for audio, to reverse direction of a video
to play or pause a audio or video
Execute “system suspend” when the buttons are pressed. It sends the system to the
sleep mode. The system power policy manager will look up the SUSPEND button
action in the current power policy (by default, sleep) and execute that action.
to advance to the next track
to open or close the CD-ROM tray
2
USING THE 17 “EZ” MULTIMEDIA/INTERNET KEYS:
In order to use the Multimedia/Internet keys, first activate their one stroke func-
tions by pressing the “EZ” key. The indicator light will come on indicating the multi-
media/internet keys are enabled. The Multimedia/Internet Intellikeys are pre-pro-
grammed to operate in accordance with the color icons/text on the keys with the
functions shown below.
to skip back to beginning of recording
to start/stop recording of Windows® (sound recorder)
Bottom row of keys:
Press
KEY:
then:
to activate screen saver
“cut” operation
FUNCTION:
Redo operation
“copy” operation
“paste” operation
Undo operation
to switch the activated window if you have several applications open, great
for cut and paste between applications
Fax-Launch a designated fax
to close current application
to open “My Document” folder
to open MS DOS prompt
Edit-Open designated editor (Notepad, Word Pad)
Save
Print
to launch a designated game
to launch default Internet browser
Search - to search all files
®
to call Windows calculator
Minimize - reduce open window task bar
to transfer a calculated result (cut then paste) to editor (Notepad, Word,
Excel, etc.)
Restore - to restore window to previous size and location
Dial - to open dial-up window
Press to display hot key menu (as shown below), to change the
default settings.
4
3
|