M K 2 3 9 4 S p e c i f i c a t i o n s
P r e l i m i n a r y
group · I
2-WAY FULL-RANGE 90° x 45°
See NOTES TABULAR DATA for details
CONFIGURATION
Subsystem
Transducer
Loading
LF 1x 12 in cone
Vented
HF 1x 1.4 in exit, 3 in voice
coil compression driver
Operating Mode
Horn-loaded
Amplifier Channels
External Signal Processing
High pass filter
Single-amp LF/ HF
Bi-amp LF, HF
DSP w/2-way filters
PERFORMANCE 1
Operating Range
70 Hz to 20 kHz
Nominal Beamwidth (rotatable)
Horz 90°
Vert 45°
Axial Sensitivity (whole space SPL)
LF/HF 97 dB
70 Hz to 20 kHz
70 Hz to 1820 Hz
1290 Hz to 17 kHz
LF 97 dB
HF 109 dB
Input Impedance (ohms)
Nominal
Minimum
LF/HF
LF
8
8
8
7.2 @ 178 Hz
7.1 @ 290 Hz
8.5 @ 6050 Hz
HF
DESCRIPTION
• Permanent installation system, selectable single-amp or bi-amp
• Rotatable HF horn provides mounting options
High Pass Filter
High Pass =>60 Hz, 12 dB/octave Butterworth
Accelerated Life Test 2
The MK2300 Series of 2-way, high output, trapezoidal loudspeakers are
designed as main PA for smaller venues, including houses of worship,
auditoriums/theaters,A/Vsystems, hotelballrooms, andmeetingrooms.
The Series is also ideal for distributed or fill purposes in larger venues,
including houses of worship, auditorium/theaters, arenas, stadiums,
nightclubs, and themed-entertainment complexes.
LF/HF 69 V
600 W @ 8 ohm
600 W @ 8 ohm
150 W @ 8 ohm
LF 69 V
HF 35 V
Calculated Axial Output Limit (whole space SPL)
Average
Peak
131 dB
131 dB
137 dB
LF/HF 125 dB
To meet the design goals for the intended applications, EAW engineers
developed a new, high performance, 3-inch voice coil, compression
driver mating it to a selection of six different HF horns with patterns from
60° x 45° to 120° x 60°. The horns are as large as the enclosure size
allowstomaintainconsistentdirectivitythroughouttheHFpassband.A3-
inch voice coil, 12 inch LF driver, was designed to complement the sonic
character and output of the HF driver. All MK2300 models are carefully
voiced to sound similar, permitting diverse horn patterns to be mixed
throughout an installation while maintaining the same sonic quality. The
results are cleaner, usable, high-fidelity output to significantly higher
levelsthanisnormallyexpectedfromloudspeakersofthissizeandprice.
LF 125 dB
HF 131 dB
ORDERING DATA
Description
Part Number
0013195
MK2394 2-Way Full-Range Loudspeaker Black
MK2394 2-Way Full-Range Loudspeaker White
0013755
MK2394 2-Way Full-Range Loudspeaker Black-WP 0013785
Optional Accessories
Eyebolt/Forged Shoulder (3/8-16 x 1.25 in)
MK2/5000 U-Bracket Black
104001
0007869
0015076
MK2/5000 U-Bracket White
Single-amp and bi-amp operating modes are user-selectable. In single-
amp mode, the beamwidth-matching passive crossover is designed for
even power response through crossover, low power losses, and high
power handling. In bi-amp mode a digital signal processor (DSP) is
required, providing sophisticated processing to maximize performance.
Foam-backed grilles hide the drivers from view for pleasing aesthetics.
Thirteen mounting points allow enclosures to be mounted in virtually any
configuration.Additional mounting points mate with OmniMount® 120.0
Series or similar brackets. Standard colors are black and white. Other
colors can be specified as a special order items.
The MK2300 are the smaller companions to the MK5300 Series
loudspeakers. Enclosures for both series are the same height facilitating
installationwheremorethanonehornpatternand/ortypeofloudspeaker
capability is needed. SixYear Warranty.
1 To achieve specified performance, the listed external signal processing with EAW-provided settings is required.
2 For recommendations to select power amplifier size refer to : “HOW MUCHAMPLIFIER POWER DO I NEED?” on the EAW web site.
Eastern Acoustic Works One Main Street Whitinsville, MA 01588 tel 800 992 5013 / 508 234 6158 fax 508 234 8251 www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
Part Number: RD0242 (1) MK2394 June 2005
|