TECHNICAL SPECIFICATIONS MQV1394
FEATURES
•Full Range VA4™ loudspeaker system
•Optimized for permanent install only
•Direct radiating 15-inch woofer in optimally vented
enclosure
•Horn loaded 10-inch cone with VA4™ phase plug
•2-inch exit/75mm voice coil compression driver on
constant directivity horn
DESCRIPTION
The MQV Series is part of the next generation of permanent
installation loudspeakers. Using VA4™ Technology developed
for the KF700 series, the MQV range replaces the ASV range
of virtual array systems.
The MQV1394 uses a single, direct radiating 15-inch woofer
in an optimally vented enclosure.
A single, horn loaded 10-inch midrange cone with a special
geometry is used which produces a time coherent wavefront
through the upper portion of the midrange that is critical to
vocal articulation. A phase plug with radial slots then serves
to reduce the mechanical resistance of the subsystem with-
out affecting the directivity of the source, allowing flawless
vertical arraying of multiple MQV modules
A high power 2-inch exit/75mm voice coil compression driver
is mounted on a constant directivity horn for consistent,
accurate dispersal of HF information.
Dimensions
Inches Millimeters
APPLICATIONS
Height (front) 26.65
677
389
1429
650
The MQV1394 is engineered as a full range component for
very large format arrays and is an effective tool in large-
scale permanent installations. Comprehensive mounting
points allow for flexible installation.
Height (rear) 15.3
Width 56.25
Depth 25.59
Trapezoid Angle 12.5 Degrees per Side
Applications include:
Weights
Pounds Kilograms
Net Weight 215
Shipping Weight 240
97.5
108.9
Large Church Large Arenas
Stadiums
DESCRIPTIVE DATA
LF Subsystem 1x 15-in Woofer
MF Subsystem 1x 10-in Horn Loaded Cone
HF Subsystem 2-in Exit/75mm Voice Coil
Compression Driver on Constant
Directivity Horn
Configuration Three-way, Full Range
Powering Triamplified
Cabinet Type (shape) Trapezoid
Enclosure Materials Baltic Birch Plywood
Finish Wear-resistant Textured Black
Paint
Connectors 1x 6-Terminal Barrier Strip &
1x Neutrik NL8 Speakon
Suspension Hardware (16) 3/8”-16 Threaded Mounting
Points (4 each on top, bottom and
sides)
Grill Powder Coated Perforated Steel
EASTERN ACOUSTIC WORKS
EAW products are continually improved. All specifications are therefore subject to change without notice. • MQV1394 PUB#888170/2p/4/1/00 • Printed In USA
|