CAM160
8 INPUT x 1 OUTPUT 160 W MIXER-AMPLIFIER
DESCRIPTION
The EAW Commercial CAM160 is an integrated audio mixer and
power amplifier outfitted with comprehensive input/output facilities
and feature sets to provide exceptional versatility from a highly cost-
effective package. Designed for a wide range of fixed installation
applications, the CAM160 offers “all in one” functionality without
need for add-ons such as expansion modules.
The CAM160 is equipped with six actively balanced combination
mic/line inputs as well as individual adjustable potentiometers for
line level input, mic level input and mic level input with 24-volt DC
phantom power. Input 1 also offers the flexibility of an integrated
transformer for connection to telephone paging systems.
Features
Inputs 1 and 2 are divided into four discrete input sections: a
combination XLR/TRS connector, Phoenix connector, or terminal
strip. Meanwhile, Inputs 3, 4, 5 and 6 offer both Phoenix connectors
and terminal strips. Two pairs of RCA connectors allow unbalanced
auxiliary (Aux) signals to enter the amplifier via Aux 1 and Aux 2,
both of which are attenuated by a potentiometer on the front of the
amplifier.
• Two combination 1/4-inch/XLR/Phoenix, or barrier strip
Mic/Line inputs
• Four Phoenix connector or barrier strip Mic/Line inputs
• Selectable 24-volt phantom power
• Two stereo auxiliary inputs
• Multiple priority levels
Two levels of priority can be established on Inputs 1 and 2, initiated
with external contact closures or adjustable signal threshold levels.
External volume control is possible through a Phoenix connector
and user supplied potentiometer. A two-position Phoenix connector
allows the internal fault relay to be connected to redundant systems.
And, an adjustable pre-announcement chime is also included.
• Transformer-balanced telephone paging on Input 1
• Signal processing loop
• Internal fault-activated relay
• External volume control
Front panel controls include a level control for each input, a toggle
switch for Aux 1 or Aux 2 selection, and one Aux master level control
for the selected Aux. Low and high EQ controls offers 12 dB of boost
or cut at 100 Hz and 10 kHz, respectively. A master volume control
affords output volume control, while distinctive LEDs indicate power
(green), signal (amber), overload (red), and fault (red).
• 4-Ohm, 25-volt, 70-volt and 100-volt outputs
• Automatic changeover to 24-volt DC backup power
• Universal power supply
• UL Approved
The CAM160 provides 160 watts of output power at 100 volts,
70.7 volts, 25 volts and 4 Ohms. An intelligent output stage is fully
protected against permanent damage caused by overloading, shorts
and thermal faults.
Applications
The CAM160 will operate on 100 volts to 240 volts AC power (50/60
Hz), and is supplied by a detachable IEC power cord. A combination
banana plug/binding post connection is also provided for
connecting an external 24-volt DCbackup battery.
• Paging Systems
• Hotel and Ballrooms
• Schools
• Houses of Worship
• Meeting Rooms
• Offices
• Foreground/Background Music Systems
Eastern Acoustic Works
|
One Main Street
TEL outside US 508.234.6158
|
Whitinsville, MA 01588 USA
|
TEL toll free within US/Canada 800.992.5013
|
FAX 508.234.8251 | Page 1 of 2
Part No. 0019318 Rev. A 11/08
|