Escali Scale Aqua Liquid Measuring Scale User Manual

Thank you for purchasing an EscaliDigital Scale.  
Please read the following operation information to ensure the  
proper function of your new scale.  
Precision Weighing Solutions  
TM  
How to weigh:  
1) Press the “On/Tare/Off” button.  
2) “0g/0oz” will appear on display.  
3) Place item gently on the panel.  
Escali  
How to measure liquids:  
User Manual  
Your scale allows you to weigh liquid ingredients and allows you to  
change the density setting for different liquids.  
During normal weighing you press the Aqua key to display the equivalent  
liquid measurement.  
How to change the density setting:  
1) Press and hold the “Aqua” button for 2 seconds.  
2) The current density setting will be displayed.  
3) Press the “D+” or “D-“ button to change the density setting.  
4) Press the “Aqua” button again to store the new setting.  
values.  
How to use the “Tare” feature:  
This feature allows the display to be reset to zero after you weigh an item  
in a container or bowl. It shows the weight of additional items as if you  
were to weigh them separately.  
1) Turn the scale on.  
2) Place the container, without the item, gently on the platform.  
3) Press the operating button, and the weight of the container will be  
removed. The display value will reset to “0g/0oz”.  
4) Gently add the item to the container. The display will show the weight  
of the item only.  
Aqua Liquid Measuring Scale  
www.Escali.com  
5) Repeat step 3 and 4 when adding more items to the container.  
How to clear the “Tare” feature:  
1) Remove all items from the platform.  
2) Press the operating button and the display value will reset to  
“0g/0oz”.  
Power Source: 9-volt battery  
Dimensions:  
Graduation:  
Capacity:  
7.5" x 7.5" x 1.25" (19cm x 19cm x 3cm)  
oz. or 1 gram  
4lb 8oz or 2000 gram  
3) The scale is reset. You can continue with normal operating.  
Weight Modes: Lb./Oz, Fl. Oz, grams and Ml  
Auto Shut Off: Turns off after 2 minutes of non-use.  
Changing the Weighing Mode:  
1) Turn the scale on.  
2) Press the Kg/Lb switch located on the bottom of your scale to  
change to Pounds/Ounces or Grams.  
3) Your scale will keep the last used weighing mode in memory and  
will return automatically to this mode when you turn the scale on.  
Additional Information  
1) Make sure your scale is at room temperature and on a stable  
horizontal surface free of vibration.  
2) This scale is not waterproof. Do not expose to moisture.  
3) As this scale is a precision instrument, it must be handled with  
extreme care. Avoid rough treatment, shaking or vibration.  
4) Do not disassemble this scale or the warranty will be void.  
5) The display value may be affected by electromagnetic disturbances  
such as operating near a radio. If this occurs, move the device that is  
causing the disturbance and turn the scale off and restart.  
Comparison weighing with customized unit function:  
This function allows you to create your own preference unit. It  
calculates the weight of an object in fractions or multiples of a user  
defined unit weight. It acts as a point of comparison.  
1) Press the “On/Tare/Off” button.  
2) Press the “Preset” button.  
3) Place an object on the platform.  
4) Press and hold the “Preset” button until the display shows 1.00,  
and the customized unit is set.  
Battery Replacement/Installation:  
Replace the batteries when the LCD display reads “bAtt”.  
1) Remove the battery door.  
2) Install a new 9V battery.  
3) Replace the battery door.  
5) Remove all items from the platform.  
6) Place an item on the platform. The display will show the weight of  
this item as a fraction or multiple of the preset unit (i.e. 0.85  
means this item is 85% of the weight of the preset unit, 1.30  
means this item is 130% of the weight of the preset unit).  
for full details.  
Please note: The customized unit information will be in memory until  
removal of the battery. Repeating step 1 – 4 will overwrite the preset  
unit. Minimum weight for customized unit is 3½ oz / 100 gr. An “E” will  
show on the display if the item is below the minimum weight or over  
the maximum weight.  
Escali’s liability is limited to two (2) times the cost of the product  
Do not place overweight items on scale  
Weighing items over the maximum weight capacity will cause an  
“EEEE” to display. Immediately remove overweight items to avoid  
causing damage to your scale.  
© Copyright Escali LLC, 2004  
 

Electro Voice Stereo Amplifier PA4150 User Manual
Extron electronic Projector Accessories PCM 240 User Manual
Extron electronic Stereo Receiver HFX 100 RX User Manual
Extron electronic TV Video Accessories MGP 462 User Manual
Fellowes Paper Shredder 69Cb User Manual
Fellowes Paper Shredder MS 450Cs User Manual
Fisher Price Motorized Toy Car 76937 User Manual
Gateway Computer Monitor FPD 1940 User Manual
GE Indoor Furnishings 106658 User Manual
Gianni Industries Door UBK 010 User Manual