ZIDI240WII
GE Monogram® Double-Drawer Refrigerator Module
(Custom panel required)
ZIDS240WSS
GE Monogram Double-Drawer Refrigerator Module
(Stainless steel)
Dimensions and Installation Information (in inches)
Installation Space
For a complete food storage center, install two Monogram
refrigeration modules side-by-side.
Locate Outlet
10-1/2"
Note: Reversible door swing on wine chillers/reserves and
beverage centers only. See below for combination cutout
dimensions.
Important Note: Products must operate from separate,
properly grounded receptacles.
24" Min.
23-3/4" Stainless Steel
9"
Max.
34-1/2"-35"
Models
24-7/8" Framed Models
1-1/2"
23-3/4" Min.
Locate Outlets
24"
Depth Including
Handle:
26" Stainless Steel
Models Only
34-1/2"
10-1/2"
10-1/2"
24" Min.
9"
Max.
9"
Max.
34-1/2" - 35"
1-1/2"
1-1/2"
47-1/2" Min.
Note:If installing between frameless
cabinets, a 1/2" wide filler strip or side panel
may be required. The filler strip will act as a
23-3/4"
spacer between the door case and adjacent cabinet
and will prevent interference with cabinet door swing.
The width of the opening must include filler panels.
Note: Additional cutout width may be required for
models with custom panels.
The cutout depth must be 24"
• Both models can be installed flush with stardard cabinetry.
• Designed to be built-in only. Cannot be used free-standing.
• White case and drawer sides, black vented toekick with
optional stainless steel toekick supplied.
Additional Specifications:
• A 120 volt 60Hz., 15 or 20 amp power supply is required. An
individual property grounded branch circuit or circuit
breaker is recommended. Install a properly grounded 3-
prong electrical receptacle recessed into the back wall as
shown. Electrical must be located on rear wall as shown.
Note: GFI (ground fault interrupter) is not recommended.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 12/07
120032
ZIDI240WII
GE Monogram® Double-Drawer Refrigerator Module
(Custom panel required)
ZIDS240WSS
GE Monogram Double-Drawer Refrigerator Module
(Stainless steel)
Features and Benefits
• Full-Extension Slide-Out Refrigerated Drawers -
Storage for everything from while melons to 146
12 oz. cans
• Electronic Adjustable Temperature Control -
Offers a range of temperatures for precise chilling
• LED Temperature Display - Allows you to monitor
the temperature at a glance
• Full-Width LED Lighting - Puts contents into
clear view
• Custom Panel and Handle Required - Customer
must install a custom door panel and handle to
complement their décor (ZIDI240WII only)
• Adjustable Dividers - Maximizes usable storage
space and flexibility
• Removable Drawer Bin - Convenient for
separating loose items
• Fold-Down Shelf - Maximizes usable storage space
• Model ZIDS240WSS - Stainless steel
• Model ZIDI240WII - Custom panels and handles
required
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 12/07
120032
|
Eton Weather Radio FR150 User Manual
Euro Pro Iron EP924H User Manual
Everpure Water System 7TO BW User Manual
Extron electronic Clock CLK 100 User Manual
Fellowes Paper Shredder PS 70 User Manual
Fiesta Gas Grill ESD45055 BC303 User Manual
Fluke Thermometer Food Safety Thermometer User Manual
Fujitsu Laptop T904 User Manual
Gaggenau Cooktop KG 291 CA User Manual
Global Technology Associates Network Card GB 250 User Manual