Mobile Lubrication Library
Excavators
Suggested automated lubrication system layout for 13-36 ton excavators.
Kit No.: 24N815, Excavator, G3, USP, 19PT
Maximum System Working Pressure: 3000 psi (206 bar, 20.7 MPa)
Important Safety Information
Read all warnings and instructions in all
Fluid leaks from incorrectly installed or ruptured compo-
related manuals. Save all instructions.
nents, and/or failure to verify the components are properly
installed and tested, can result in serious injury such as
fluid spraying in the eyes or on skin and fluid injection, or
equipment damage.
Related Manuals
To prevent injury or equipment damage, installation must
Manual No.
Manual Title
be done by a professional and tested prior to use. Consult
Parker literature for specific hose assembly instructions.
These instructions are available from your Parker represen-
3A0414
3A0525
3A0528
3A0860
G3 Pump
Pressure Relief Valve
Remote Manual Run
USP Valves
The information contained in this document is only a recommendation for an automatic lubrication system and is not intended to
replace the installation and maintenance instructions provided by the original equipment manufacturer.
Mobile Lubrication Library
24N815: Kit Parts List
Qty
1
1
Part No.
96G112
571041
571036
571028
24E408
24E409
571033
24N008
16U586
556773
556763
555749
557393
556402
557349
16U587
15K783
127009
16U982
16U983
24F467
557944
127012
563178
127013
Description
PUMP, G3-G-24MX-8L0L00-UDMVA1R2 (see manual 3A0414)
KIT, accessory, pump element
KIT, accessory, cover
1
2
KIT, accessory. pressure relief (see manual 3A0525)
KIT, valve, USP, 10 outlet
1
1
KIT, valve, USP, 12 outlet
1
KIT, remote manual run, 24V, w/ cable (see manual 3A0528)
KIT, accessory, mounting, USP, 10-12
KIT, hose, 100 ft
2
1
4
HOSE, end female swivel SAE 4 JIC
FITTING, 4 JIC 1/8 pm
31
12
12
2
CONNECTOR, 4 JIC 1/8 pm
COUPLING, 1/8 fp x 1/8 mp x 1-1/4 HEX
FITTING, 1/4 x 1/8 nptf hex
2
PLUG, dryseal 1/8 nptf
1
KIT, accessory, guard, scuff, 80 ft
FITTING, elbow, street, 1/8
5
4
TIE, cable, 14.75’ x .31” black
1
KIT, hose, 200 ft
1
KIT, accessory, guard, 160 ft
2
PLUG, USP, doubling plug
20
20
5
CLAMP, 7/16, tube 4TS6-14002
CLAMP, hose, .375 OD hose
COUPLING, extension 1/8 female to 1/8 male
FITTING, swivel, JIC 37D size #4
38
ACCESSORIES
Part Number
24E406*
24E407*
24E410*
24E411*
24N007
Description
KIT, valve, USP, 6 outlet
KIT, valve, USP, 8 outlet
KIT, valve, USP, 14 outlet
KIT, valve, USP, 16 outlet
KIT, mounting bracket, 6-8 outlets
KIT, mounting bracket, 14-16 outlets
24N009
*see manual 3A0860
Mobile Lubrication Library
Typical Pump Installation
Manual Run
Button
Pressure Relief
To Fuse/Power
To Lube Points
G3
Pump
USP
Valve
Graco Information
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: 612-623-6928 or Toll Free: 1-800-533-9655, Fax: 612-378-3590
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original information. This manual contains English. MM 333501
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2013, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
August 2013, revised January 2014
|