MODEL G5344
AIR PALM SANDER
INSTRUCTION SHEET
Assembly and Attaching Abrasives
To assemble the sander and attach sandpa-
per:
EYE INJURY HAZARD!
Always wear safety glasses
when using this tool to
prevent serious personal
injury.
1. Thread the air hose into the sander.
2. Install a 1⁄4" NPT male quick-disconnect fitting
(not included) into the end of the hose.
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected
operation during service.
3. Lift one clamp up over the bracket (Figure 2),
then pull the clamp down to open it.
Bracket
DUST HAZARD!
Alwayswearrespiratorwhen
using this tool.
Introduction
This 15,000 RPM air sander requires 75 PSI and
3" x 41/2" sanding sheets. (You can cut a standard
9" x 11" sanding sheet into sixths and trim each
piece to size.) Air hose inlet is 1/4" NPT.
Figure 2. Opening clamp.
4. Insert one end of the sandpaper between the
clamp and base as shown in Figure 3, and
lift the clamp up and back over the bracket to
secure the sandpaper.
Inventory
A. Air Palm Sander......................................... 1
B. Air Hose...................................................... 1
B
A
Figure 1. Model G5344.
Figure 3. Attaching and securing sanding sheet.
COPYRIGHT © MAY, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL8253 PRINTED IN TAIWAN
G5344 Parts Breakdown and List
�
�
�
�
�
�
�
�
��
��
��
��
��
�
��
��
��
��
��
��
��
��
��
��
��
��
��
��
�
��
�
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
1
PS07M
PHLP HD SCR M4-.7 X 8
LOCK WASHER 4MM
HOUSING COVER
14
15
16
17
18
19
20
21
22
23
24
25
P5344014
P5344015
P5344016
P5344017
P5344018
PFH49M
CYLINDER
2
PLW02M
P5344003
P5344004
P5344005
P5344006
P5344007
P5344008
P5344009
P5344010
P5344011
PS38M
STEEL BALL
3
CLAMP SPRING
4
RUBBER SUPPORT ASSEMBLY
TUBE ASSEMBLY
MODEL LABEL
FLAT HEAD SCREW
CYLINDER SUB ASSEMBLY
FLAT HD SCR M3-.5 X 6
VALVE BUSHING
FLAT HEAD SCREW
LOCK WASHER 4MM
HOSE SUB ASSEMBLY
CLAMP STOMPER
ROLL PIN
5
6
7
RUBBER PAD ASSEMBLY
THROTTLE VALVE
O-RING
P5344020
P5344021
PLW02M
P5344023
P5344024
P5344025
8
9
10
11
12
13
VALVE FITTING
HOUSING CAP
PHLP HD SCR M4-.7 X 10
END PLATE
P5344013
|