HANNspree Flat Panel Television 62 01000016G000 User Manual

28”  
Liquid Crystal Display Television  
Fernsehers mit Flüssigkristallanzeige  
Téléviseur à Écran à Cristaux Liquides  
TV de Pantalla de Cristal Líquido  
Questo televisore LCD  
LCD (vloeibaar-kristalscherm) TV  
Televisor com Ecrã de Cristais Líquidos  
Telewizora ciekłokrystalicznego  
Жидкокристаллического  
Телевизионного Дисплея  
S_LCD2_UM_EUR_R01_K  
62-01000016G000  
 
Table of Contents  
Regulatory Information ................................................................ 3  
Description of Warning Symbols .................................................. 3  
Safety Notices............................................................................. 4  
Preface ....................................................................................... 6  
Warranty and Service .................................................................. 6  
1. Getting Started ........................................................................8  
1.1 Package Contents .............................................................8  
1.2 Introducing the TV .............................................................9  
1.3 Features ...........................................................................9  
1.4 Control Panel .................................................................. 10  
1.5 Input and Output Jacks .................................................... 11  
1.6 Remote Control ............................................................... 12  
1.6.1 Inserting the Remote Control Batteries .................... 15  
2. Setting up your TV ................................................................. 17  
2.1 Basic Connections........................................................... 17  
2.1.1 Power Connection .................................................. 17  
2.1.2 Connecting an Antenna or Cable TV........................ 17  
2.2 Connecting External Devices ........................................... 18  
2.2.1 Connecting External Earphones .............................. 18  
2.2.2 Connecting to AV Devices....................................... 19  
2.2.3 Connecting a VCR/ STB/ DVD Player Using  
Component Video ................................................... 20  
2.2.4 Connecting a PC using VGA ...................................20  
2.2.5 Connecting a PC using DVI..................................... 21  
2.2.6 Connecting HDMI ................................................... 21  
2.2.7 Connecting a VCR/ STB/ DVD Player using SCART .... 22  
2.3 Using the TV ................................................................... 23  
2.3.1 Turning the TV On and Off ...................................... 23  
2.3.2 Switching Source Signals........................................ 23  
2.3.3 Performing an Automatic Channel Search................ 23  
2.3.4 Selecting Channels................................................. 23  
2.3.5 Adjusting the Volume .............................................. 23  
3. Adjusting On-Screen Display (OSD) Settings .......................... 24  
3.1 OSD Setting Menus ......................................................... 25  
3.2 Adjusting Picture Settings ................................................ 25  
3.3 Adjusting Sound Settings ................................................. 26  
1
 
Table of Contents  
3.4 Adjusting Channel Settings .............................................. 27  
3.5 Adjusting TV Settings ...................................................... 28  
3.6 Parental Control .............................................................. 31  
3.7 Adjusting PC Setup Settings ............................................ 31  
4. Troubleshooting ..................................................................... 34  
5. Specifications ........................................................................ 35  
6. Dissembling the stand base.................................................... 37  
7. Using the Cable Organizer ..................................................... 38  
2
 
Regulatory Information  
CE Conformity Statement  
This device is in conformity with the requirements of EU Council Directive  
2004/108/EC on the approximation of the laws of the Member States relating to  
electromagnetic compatibility and Directive 2006/95/EC on the harmonization of  
the laws of Member States relating to electrical equipment for use within certain  
voltage limits. Hannspree cannot accept responsibility for any failure to satisfy  
the requirements resulting from a non-recommended modification of the device.  
Description of Warning Symbols  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
WARNING  
CAUTION  
This symbol is used to alert users  
to pay attention to important  
descriptions regarding usage,  
maintenance (repair), and  
additional important information  
related to this TV.  
This symbol is used to alert users  
to the risk of electric shocks due  
to dangerous and uninsulated  
components.  
3
 
Safety Notices  
Installation Safety Notes  
Location  
Avoid allowing the TV to get prolonged exposure to sunlight or other strong  
sources of heat. Leave sufficient distance between the TV and the wall to  
provide enough space for the emission of heat.  
WARNING  
To reduce the risk of fire or electric shock, do not expose this apparatus to  
rain or moisture.  
Apparatus shall not be exposed to dripping or splashing and no objects  
filled with liquids, such as vases, shall be placed on the apparatus.  
CAUTION  
These servicing instructions are for use by qualified service personnel only. To  
reduce the risk of electric shock, do not perform any servicing other than that  
contained in the operating instructions unless you are qualified to do so.  
Notes:  
The LCD TV is for entertainment use only and visual display  
tasks are excluded.  
This device uses a VGA connector to connect to a PC. To reduce  
the influence of main frequency on the source signal, use a VGA  
monitor cable with ferrite shield.  
4
 
Personal Safety  
1. To avoid overloading the power supply, never plug too many electrical  
devices into an outlet, power strip, or extension cable.  
2. Dangerous high-voltage electric power components are located inside the  
TV. To avoid electric shock, do not disassemble the casing.  
3. Do not place or drop metals, small objects, or flammable materials into  
the vent of the TV.  
4. If the TV is dropped, falls down, or is otherwise damaged, unplug the  
power cord immediately and contact an authorized service technician.  
5. If any fluid is sprayed or dropped into the TV, contact an authorized  
service technician.  
6. The screen of the TV is made of glass. Avoid hitting or scraping it. If the  
screen is broken, do not touch the broken glass.  
7. Do not allow children to use the TV unattended.  
8. Be careful when disconnecting the power plug. Hold the plug. Do not  
attempt to disconnect the plug by pulling on the power cord.  
Installation  
1. Do not place the TV in locations where there is excessive steam or dust.  
2. Avoid blocking the TV's vents, do not place the TV on a bed, sofa, carpet,  
or in a sealed cabinet.  
3. Install the outdoor antenna away from power transmission lines to avoid  
possible danger.  
5
 
Preface  
Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD  
TV). Your new TV will allow you to enjoy superior audio and video while  
enriching your lifestyle with advanced technology.  
Please carefully read this manual in its entirety before setting up, using or  
operating your TV. To ensure the safe and correct installation and operations of  
the TV, it is important that the safety and operation instructions in this manual  
are followed.  
This instruction manual is designed to assist you in setting up and using the TV.  
The information in this manual has been carefully checked for accuracy;  
however, no guarantee is given to the correctness of the contents. The  
information in this manual is subject to change without notice.  
To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not  
be liable for direct, indirect, special, exemplary, incidental or consequential  
damages arising from any defect or omission in this manual, even if advised of  
the possibility of such damages in advance.  
Warranty and Service  
For complete warranty service information, please refer to the “Warranty Card”  
enclosed with your TV.  
6
 
Copyright  
© Copyright 2008 Hannspree, Inc.  
All rights reserved. This manual is protected by copyright and distributed under  
licenses restricting its use, copying and distribution. No part of this manual may  
be reproduced in any form by any means without the prior written authorization  
of Hannspree. The TV described in this manual may include copyrighted  
software of Hannspree (or other third parties). Hannspree (or other third parties)  
preserves the exclusive rights for copyrighted software, such as the right to  
distribute or reproduce the copyrighted software. Accordingly, and to the extent  
allowed by applicable law, any copyrighted software contained in the product  
described herein shall not be distributed, modified, reverse engineered, or  
reproduced in any manner without the prior written authorization of Hannspree  
(or of other third parties).  
The Hannspree logos presented herein are trademarks of Hannspree. All other  
product names, trademarks or logos mentioned herein are used for identification  
purpose only, and may be the trademarks or registered trademarks of their  
respective owners.  
The purchase of the product described herein shall not be deemed to grant,  
either directly or by implication, estoppel or otherwise, any license under the  
copyrights, patents, patent applications or trademarks of Hannspree, except for  
the normal, non-exclusive use that arises by operation of law in the sale of a  
product.  
Trademark Notice  
Hannspree products incorporate High-Definition Multimedia  
Interface (HDMI™) technology.  
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or  
registered trademarks of HDMI Licensing LLC.  
7
 
1
Getting Started  
1.1 Package Contents  
Make sure the following components are included in the box. Please contact  
Hannspree Customer Service immediately if anything is missing or damaged.  
TV  
User’s manual  
Quick start guide  
Warranty card  
Power cord  
Remote control and batteries  
According to WEEE regulation, this TV can’t be handled as normal  
trash in Europe when it is out of usage. Please refer to the recycle  
information from our website to handle it.  
®
As an ENERGY STAR Partner, Hannspree has determined that this product meets  
®
the ENERGY STAR guidelines for energy efficiency.  
8
 
1.2 Introducing the TV  
You can watch SECAM/ PAL/ DVB-T broadcast, cable, or digital television channels,  
and easily connect a VCR, STB or DVD player to the SCART, component, and HDMI  
input ports (location of these ports depends on model). You can also use the TV as a  
monitor for your PC by connecting it through the VGA port.  
Convenient control buttons located on the TV and a handy remote control let you  
change channels, adjust the volume, and change display settings through an easy-  
to-use on-screen display menu system. The built-in stereo speakers provide full rich  
sound and a convenient audio output port lets you connect to an external audio  
system or earphones.  
1.3 Features  
• TV Tuner: Built-in TV Tuner  
• Audio/ Video support:  
– SCART inputs  
– VGA (PC) input  
– HDMI inputs  
• Teletext (TV RF+SCART) 1.5v.  
with 1000 pages memory  
• Built-in stereo speakers  
• Image Enhancement Technology  
– 3:2/2:2 pull down  
– YPBPR inputs  
– 3D Comb Filter  
– R/L audio inputs  
– PC line input  
– HD-ready TV  
• Noise Reduction  
– 3.5 mm stereo earphone  
output  
• Advanced 3D de-interlacing  
• Edge Enhancement  
• On-Screen Display (OSD) menu  
system  
Note:  
• The supporting devices mentioned in this manual may vary on different models.  
For more information, please refer to the manufacturer’s user manual or the  
Quick Start Guide of your TV model.  
9
 
1.4 Control Panel  
Description  
Button  
Function  
Power  
Press to turn the TV on or off.  
Input source  
Menu  
INPUT  
MENU  
Press to select the proper input source.  
Press to open the OSD menu.  
Press to increase the program number or  
move upward to the previous item on the  
OSD menu.  
Program select  
Program select  
P S  
P T  
Press to decrease the program number or  
move downward to the next item on the OSD  
menu.  
Press to increase the volume or move to the  
right on the OSD menu.  
Volume adjust  
Volume adjust  
VOL +  
VOL -  
Press to decrease the volume or move to the  
left on the OSD menu.  
Remote IR  
sensor  
Receive incoming remote control commands.  
Power/Standby  
indicator  
Indicate power or standby status.  
Deliver high-quality sounds.  
Speakers  
10  
 
1.5 Input and Output Jacks  
Description  
Connector  
Function  
Cable/Antenna  
Connect to an antenna or cable TV.  
TV/DTV  
CABLE/ANTENNA  
Connect to earphones or external  
speakers with built-in amplifier.  
Earphone Output  
EAR  
PHONE  
Component  
Inputs (audio)  
Connect to an external device, such as a  
VCR, STB, or a DVD player.  
AUDIO  
R
L
Component  
Inputs (Video)  
Connect to an external device, such as a  
VCR, STB, or a DVD player.  
Y
P
B
PR  
PC Audio Input  
Connect to a PC’s line/ audio out port.  
PC LINE IN  
Connect to an external device, such as a  
VCR, STB, or a DVD player with AV, S-  
Video, RGB, L/R IN, Analog TV Out, and  
L/R Out.  
SCART1 IN/OUT  
SCART 1 IN / OUT  
Connect to an external device, such as a  
VCR, STB, or a DVD player.  
SCART 2 IN  
SCART 2 IN  
VGA (PC) Input  
Service  
Connect to a PC’s VGA port.  
VGA  
Service only. Not available for users.  
SERVICE  
11  
 
Description  
Connector  
Function  
Connect a HDMI equipment or an HDMI-  
DVI adapter cable to devices such as a  
DVD player or set-top box.  
HDMI 1 Input  
HDMI 1  
Connect a HDMI equipment or an HDMI-  
DVI adapter cable to devices such as a  
DVD player or set-top box.  
HDMI 2 Input  
HDMI 2  
Power Connector  
Connect to the included power cord.  
AC IN  
1.6 Remote Control  
Description  
Icon  
Function  
Power  
Press to turn the TV on or off.  
Press to select the input signal type selections:  
TV, Component, SCART 1, SCART 2, VGA,  
HDMI 1, or HDMI 2.  
Input Signal  
Type  
INPUT  
Use to select a program directly. Press 0-9 to  
enter the program numbers (press 1 and 0 for  
program 10).  
Keypad  
Pro.List  
Last  
Press to display the features contained.  
Pro.LIST  
LAST  
Press to return to the last channel selected.  
Press to display current channel/ program  
information.  
Information  
Menu  
INFO  
Press to turn the on-screen display (OSD)  
menu on/ off; confirm the setting.  
MENU  
12  
 
Description  
Icon  
OK  
Function  
OK  
Press to confirm selection.  
Press up, down, left or right to scroll through  
the on-screen display menus.  
Arrows  
Electronic  
Program  
Guide  
Press to display detailed programming  
information for channels.  
EPG  
Press to active teletext.  
Teletext mode  
Volume adjust  
TEXT  
Press VOL + to increase audio volume.  
Press VOL - to decrease audio volume.  
VOL / VOL  
Press to eliminate sound. Press it again or  
press the volume adjust buttons to restore  
sound.  
MUTE  
Mute  
Press to change the multi sound selection of  
the TV channel.  
Dual sound  
Select  
program  
Press PS to increase the program number.  
Press PT to decrease the program number.  
P
/
P
Press to display a table of the available teletext  
subjects.  
(Programmable in the teletext mode only)  
Index  
Mix  
INDEX  
MIX  
Press to display the teletext over the program  
on the screen.  
(Programmable in the teletext mode only)  
Press to go to the sub page. (Programmable in  
the teletext mode only)  
Subpage  
SUBPAGE  
SIZE  
Press to adjust screen size. (Programmable in  
the teletext mode only)  
Adjust size  
13  
 
Description  
Icon  
Function  
Press to inactivate automatic page change  
which only occurs when more than one teletext  
page exists.  
Hold  
HOLD  
(Programmable in the teletext mode only)  
Press to display the hidden information, such  
as solutions to puzzles. (Programmable in the  
teletext mode only)  
Reveal  
Subtitle  
REVEAL  
Press to display the subtitles while playing  
movies.  
SUB.TITLE  
FAV.  
Favorite  
channel  
Press to select favorite channels.  
Press to pause a video frame on-screen.  
(Programmable in the TV source only)  
Freeze  
FREEZE  
Press to adjust the width-to-height ratio of the  
image with aspect ratio: Auto, Full, Normal,  
Panorama, Zoom, Subtitle.  
Aspect ratio  
Picture mode  
ASPECT  
PIC  
Press to select Standard/ Movie/ Sport/  
Concert/ Game/ User.  
Press repeatedly to set the sleep timer (15, 30,  
45, 60, 90 or 120 minutes).  
Cancel the timer by selecting the Sleep Off  
option.  
Sleep timer  
SLEEP  
Note:  
For best results, use the remote control within a proper distance from the  
front of the TV. Do not exceed an angle of 30 degrees when pointing at TV.  
The operational distance may be shortened when the signal sensor is  
directly exposed to strong light.  
Aim the transmitter on the remote control at the signal sensor and ensure  
that there are no obstacles between them.  
14  
 
1.6.1  
1
Inserting the Remote Control Batteries  
Open the battery compartment cover at the back of the remote control (A).  
(A)  
2
Insert the batteries paying attention to the polarity markings inside the battery  
compartment (B).  
(B)  
3
Replace the battery compartment cover (C).  
(C)  
15  
 
CAUTION  
If the remote control is not used for a long period, remove the batteries  
and store them properly.  
Handle damaged or leaking batteries carefully, and wash hands with  
soap if they come in contact with leaked chemical fluids.  
If your remote control has two batteries, do not mix new and old  
batteries, or the life of the new batteries will be shortened. Chemical  
fluids may leak from the old batteries.  
Danger of explosion if battery is incorrectly replaced. Replace only with  
the same or equivalent type recommended by the equipment  
manufacturer. Discard used batteries according to manufacturer’s  
instructions.  
Refer to your local recycling or waste disposal rules and contact a local  
waste disposal vendor to dispose of used batteries.  
The remote control cover may have a magnet in it, so do not place  
magnetic sensitive items such as watches, credit cards, or flash media  
close to the cover.  
Do not use force when pulling the remote control cover open; you may  
damage the hinge.  
16  
 
2
Setting up your TV  
2.1 Basic Connections  
2.1.1 Power Connection  
1
2
Connect the power cord to the AC IN input jack on the rear of the TV.  
Insert the plug at the other end of the power cord into a power outlet.  
2.1.2  
Connecting an Antenna or Cable TV  
Connect one end of the VHF/UHF (Antenna) or CATV cable to TV/DTV jack on the  
rear of the TV.  
Antenna  
TV/DTV  
CABLE/ANTENNA  
Ground Clamp  
Ground  
Coaxial Cable  
Note:  
• Images are for illustration only and may vary by model or region.  
• If you cannot receive channels after connecting to an antenna or cable TV line,  
try scanning for channels.  
17  
 
2.2 Connecting External Devices  
Connect external devices such as VCRs, STBs, DVD players, video game consoles,  
earphones, or a PC to the TV using the appropriate ports on the rear of the TV.  
2.2.1  
Connecting External Earphones  
Headphones  
EAR  
PHONE  
Speakers  
(Built-in Amplifiers)  
Note:  
External speakers or headphones are not included with the TV.  
The internal TV speakers will not output sound when headphones are  
plugged in.  
Use external speakers with built-in amplifiers only.  
Only one external device for sound can be connected at a time.  
18  
 
2.2.2  
Connecting to AV Devices  
The following diagram illustrates how to connect the AV devices to your TV via HDMI  
(A), Component (B), and SCART (C) ports.  
C
A
B
AUDIO  
R
L
Y
PB  
PR  
HDMI 1  
HDMI 2  
SCART 1 IN / OUT  
SCART 2 IN  
R
-A  
U
D
IO  
-L  
/M  
O
N
O
V
ID  
E
O
S
.V  
ID  
E
O
HDMI  
R L Y P  
B
PR  
L
R
VIDEO S-VIDEO  
SCART  
19  
 
2.2.3  
Connecting a VCR/ STB/ DVD Player Using  
Component Video  
Connect the TV to a VCR/ STB/ DVD player using the component video inputs.  
AUDIO  
R
L
Y
PB  
PR  
VCR  
STB  
Audio Cable  
(Optional)  
DVD  
Video Cable  
(Optional)  
2.2.4  
Connecting a PC using VGA  
Connect the TV to your PC to use it as the monitor using the VGA port as shown.  
1
2
Connect the VGA port of the TV to the VGA output of the PC.  
Connect the line out port of the PC to the PC LINE IN port of your TV to listen to  
audio from the PC.  
PC LINE IN  
VGA  
20  
 
2.2.5  
Connecting a PC using DVI  
Connect the TV to your PC to use it as the monitor using the DVI port as shown.  
1
2
Connect the HDMI port of the TV to the DVI output of the PC.  
Connect the line out port of the PC to the PC LINE IN port of your TV to listen to  
audio from the PC.  
PC LINE IN  
HDMI  
2.2.6  
Connecting HDMI  
HDMI (High Definition Multimedia Interface) assures that the best video signal is  
always sent from source to the TV. Refer to the following illustration to connect an  
HDMI device to the TV.  
HDMI  
Note:  
When the HDMI cable is connected, connecting the audio cable is not necessary.  
However, it is necessary to do so if a HDMI to DVI cable is connected.  
21  
 
2.2.7  
Connecting a VCR/ STB/ DVD Player using SCART  
Connect the SCART (optional) to connect a TV, VCR, VCD, DVD player or video  
game console. You can choose to use a SCART cable or adapter for the connection  
depending on the ports available on your player.  
SCART 2 IN  
SCART 1 IN / OUT  
R-AUDIO-L/MONO  
VIDEO  
S.VIDEO  
Note:  
The S-Video connector and AV connectors cannot be connected at the  
same time, or the wrong signals might be generated.  
The cables are color-coded (black, red, white, and yellow). Connect each  
color-coded cable to the appropriate connector on your device.  
22  
 
2.3 Using the TV  
2.3.1 Turning the TV On and Off  
1
Press  
on the control panel or remote control. The power LED indicator on the  
TV changes from amber to blue, indicating that the TV is on.  
2
Press  
again. The power LED changes from blue to amber, indicating that  
the TV is off.  
2.3.2  
Switching Source Signals  
Press INPUT on the control panel or remote control to select the incoming source  
signal to set TV source for channel search.  
2.3.3  
Performing an Automatic Channel Search  
Before using the TV to view programs, you need to activate the channel search first.  
1
Press MENU on the control panel or remote control, then select to enter the  
Channel menu.  
2
3
Select Auto scan, then Start option.  
Press OK on the remote control to run the channel search.  
2.3.4  
Selecting Channels  
Press PS on the remote control or control panel to increase the channel number.  
Press PT on the remote control or control panel to decrease the channel  
number.  
Enter the specific channel number by pressing the number buttons on the remote  
control.  
2.3.5  
Adjusting the Volume  
1
2
3
Press VOL+ on the control panel or remote control to increase the volume.  
Press VOL- on the control panel or remote panel to decrease the volume.  
Press MUTE to eliminate sounds, and press MUTE again or press the volume  
buttons to restore the original volume.  
23  
 
3
Adjusting On-Screen Display  
(OSD) Settings  
The On-Screen Display (OSD) menu system provides a quick and simple method to  
adjust the TV settings. The OSD menu can be accessed conveniently through the  
buttons on the remote control.  
Before going into details of each OSD option, you may get acquainted with the  
placement of the OSD system:.  
CURRENT MENU:  
Displays the title of the  
currently selected menu.  
MAIN MENU:  
Setting  
Displays a list  
Aspect  
Auto  
Auto  
English  
On  
of menu items.  
The selected  
item is  
HDMI Scan Info  
Menu Language  
Blue Mute  
Sleep  
Off  
SCART  
highlighted by  
a dark blue  
color than  
other menu  
items.  
Reset Setting  
OK Enter  
Select MENU Exit  
ADJUSTABLE Options:  
INSTRUCTIONS:  
Displays the setting/value  
of the adjustable options.  
Quick instructions for  
adjusting the settings.  
Function  
OSD Menu  
Up  
TV Control Panel  
Remote Control  
MENU  
MENU  
PS  
Arrow  
Down  
PT  
Arrow  
Select/ Increase  
VOL +  
Arrow  
Select/ Decrease  
Exit  
VOL –  
MENU  
Arrow  
MENU  
24  
 
3.1 OSD Setting Menus  
Follow the instructions indicated on the down side of the OSD Function Menu. Press  
PS/Ton the control panel or  
on the control panel or the  
menu.  
/
arrow keys to scroll through the menus, VOL +  
arrow key to select an item, or MENU to exit the OSD  
The following menus can be set by different adjustment methods.  
3.2 Adjusting Picture Settings  
1
Press MENU to enter the OSD Main Menu  
screen. The Picture menu is then displayed.  
Picture  
Scenario Mode  
Brightness  
Contrast  
Standard  
50  
50  
5
2
3
4
Press  
Press  
to enter the Picture menu.  
Hue  
50  
5
Colour  
/
to select an item.  
Sharpness  
Phase  
12  
Press  
/
to adjust the scales or options  
Colour Temp  
Advanced Picture Adjust  
Reset Picture  
Standard  
settings.  
OK Enter  
Select MENU Exit  
5
6
7
Press OK to confirm the setting. Press MENU to return to the Picture menu.  
Press MENU to exit the OSD menu.  
The Picture menu can be used to adjust the Scenario Mode, Brightness, Contrast,  
Hue, Colour, Sharpness, Phase, Colour Temp, Advanced Picture Adjust, and Reset  
Picture settings.  
• The Scenario Mode can be set to Standard, Movie, Sport, Concert, Game, or User.  
• The Colour Temp can be set to Standard, Warm, or Cold.  
• The Advanced Picture Adjust can be set to Noise Reduction, CTI, Backlight  
control, ACM and DCG.  
- Noise Reduction reduces vidual noise without reducing details. Select from Off,  
Low, Medium or High.  
- CTI (Colour Transition Improvement) smoothes out the edges of color images so  
that colors can be more precisely reproduced.Select from Off, Low, Medium or  
High.  
- Backlight control helps to manually turn down the backlight in dark scenes,  
generating a deeper black color. Press  
/
to adjust the scales from 0-100.  
25  
 
- ACM (Adaptive Contrast Management) delivers high contrast ratio and optimum  
brightness to produce the best possible picture. It enhances the panel contrast by  
making bright areas brighter and dark areas darker.  
- DCG balances the screen contrast. When the backlight is dark, the image turns  
bright. When the backlight is light, the image turns dark.  
Note:  
The options available on the OSD may vary depending on the input signal source.  
3.3 Adjusting Sound Settings  
1
Press MENU to enter the OSD Main Menu  
Audio  
screen.  
Scenaril Mode  
Treble  
Standard  
50  
50  
0
2
3
Press  
Press  
to select the Audio menu.  
to enter the Audio menu.  
Bass  
Balance  
Sound Effect  
Reset Audio  
Off  
4
5
Press  
/
to select an item.  
Press  
/
adjust the scales or options  
settings.  
OK Enter  
Select MENU Exit  
6
7
8
Press OK to confirm the setting. Press MENU to return to the Audio menu.  
Press MENU to exit the OSD menu the OSD menu.  
The Audio menu can be used to adjust the Scenario Mode, Treble, Bass, Balance,  
Sound Effect, and Reset Audio settings.  
• The Scenario Mode can be set to Standard, Movie, Sport, Concert, Game, or User.  
Note:  
The options available on the OSD may vary depending on the input signal source.  
26  
 
3.4 Adjusting Channel Settings  
1
2
Press MENU to enter the OSD Main Menu screen.  
Channel Management  
Country  
Press  
menu.  
to select the Channel Management  
UK  
Off  
UK  
Daylight Saving  
Time Zone  
Auto Scan  
3
Press  
menu.  
Press  
to enter the Channel Management  
Manual Scan  
Channel Edit  
Preferred Subtitle  
Subtitle Type  
Off  
Normal  
English  
4
5
/
to select an item.  
Digital Teletext Language1  
Press  
/
adjust the scales or options settings.  
OK Enter  
Select MENU Exit  
6
7
8
Press OK to confirm the setting. Press MENU to return to the Channel menu.  
Press MENU to exit the OSD menu.  
The Channel Management menu can be used to perform a channel search and to adjust  
the Country, Daylight Saving, Time Zone, Auto Scan, Manual Scan, Channel Edit,  
Preferred Audio, Preferred Subtitle, Subtitle Type, and Digital Teletext Language  
settings.  
• The Country can be set to UK, France, Germany, Italy, Spain, Swizerland,  
Denmark, Belgium, Netherlands, Luxembourg, Czech Rep., United Arab  
Emirates, Saudi Arabia, Portugal, and Other.  
• The Daylight saving can be set to On/Off.  
• The Time Zone will display the location of the Time Zone option.  
• Select Auto Scan to activate the automatic TV channel search.Select Manual Scan to  
search the TV channels manually.  
Manual Scan  
Auto Scan  
Analog Manual Scan  
Digital Manual Scan  
Status: Scanning.  
Analog Channels:0  
Digital Channels:0  
5%  
OK Enter  
Select MENU Back  
MENU Cancel  
27  
 
9
Press  
to enter the Channel Edit menu, the Channel Editor allows you to edit the  
detailed items, including Name, Skip, and Reorder for each channel.  
Channel Edit  
Name  
Name  
Skip  
1
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
2
3
Reorder  
4
5
6
7
8
9
10  
OK Enter  
Select MENU Back  
OK Enter  
Select MENU Back  
• To change the channel name, select Name, and input the channel name you prefer  
using the numeric buttons 0 ~9 on the remote control. Refer to the following list for the  
displayed letter for each corresponding press of the numeric buttons. Press OK.  
1 1  
6 6, M, N, O, m, n, o  
7 7, P, Q, R, p, q, r  
8 8, T, U, V, t, u, v  
9 9, W, X, Y, Z, w, x, y, z  
0 0, Space  
2 2, A, B, C, a, b, c  
3 3, D, E, F, d, e, f  
4 4, G, H, I, g, h, i  
5 5, J, K, L, j, k, l  
• The Preferred Subtitle can be set to English, French, German, Italian, Spanish,  
Portuguese, Dutch, Polish and Off.  
• The Subtitle Type can be set to Normal and Hearing Impaired.  
• The Digital Teletext Language can be set to English, French, German, Italian,  
Spanish, Portuguese, Dutch and Polish.  
Notes:  
1. The Channel Settings are only available in TV mode.  
2. If the country you are in are not listed in Country option, set the default value to  
Other.  
3.5 Adjusting TV Settings  
1
Press MENU to enter the OSD Main Menu  
screen.  
Setting  
Aspect  
Auto  
Auto  
English  
On  
HDMI Scan Info  
Menu Language  
Blue Mute  
Sleep  
2
3
4
5
Press  
Press  
to select the Setting menu entry.  
to enter the Setting submenu.  
Off  
SCART  
Reset Setting  
Press  
Press  
/
to select an item.  
/
to change the scales or  
options settings.  
28  
 
6
Press OK to confirm the changed setting. Press MENU to return to the Setting menu  
entry.  
7
8
Press MENU to exit the OSD menu.  
The Setting menu can be used to adjust the Aspect, HDMI Scan Info, Menu  
Language, Blue Mute, Sleep, SCART and Reset Setting.  
• The available Aspect selections include Auto, Full, Normal, Panorama, Zoom and  
Subtitle.  
• The available selections in HDMI Scan Info are Auto, Overscan, Underscan.  
• The available Menu Language selections are English, French, German, Italian,  
Spanish, Portuguese, Dutch and Polish.  
• The Blue Mute can be set to On or Off.  
• The Sleep can be set to Off, 15, 30, 45, 60, 90 or 120 minutes.  
9
The SCART mode selections include SCART1 , SCART2. SCART1: Auto, Mixed, RGB,  
CVBS, S-Video. SCART2: CVBS, S-Video, Auto, Mixed. The SCART1 can be set to  
AUTO, Mixed, RGB, CVBS or S-VIDEO. The SCART2 can only be set to CVBS, S-  
Video, Auto, or Mixed.  
10 Select Reset Setting to reset settings to the defaults.  
29  
 
11 Under the16:9 input signal, the Aspect modes include HDMI, SCART Component, and  
TV modes for Video mode selection. The TV mode selection includes Full, Normal,  
Zoom, Subtitle, Panorama and Auto. Please see the pictures below for details.  
Full  
Normal  
Zoom  
Subtitle  
Auto  
Panorama  
Note:  
The options available on the OSD may vary depending on the input signal source.  
30  
 
3.6 Parental Control  
Parental Control allows you to block  
channels, programs not appropriate to  
certain ages, or input devices with a  
password you setup.  
Parental Control  
Password  
1
2
3
4
5
Press MENU to enter the OSD Main Menu  
screen.  
Press  
to select the Parental Control  
OK Enter  
Select MENU Exit  
menu entry.  
Press OK to enter the Parental Control  
menu.  
Press  
Password.  
Press  
/
to select Channel Block, Age Rating, Input Block, or Change  
/
to adjust the scales or options settings.  
Note:  
The original password is set to 0000 by default.  
3.7 Adjusting PC Setup Settings  
1
2
Connect the LCD TV set to your computer.  
Picture  
Scenario Mode  
Standard  
Standard  
Press INPUT on the control panel or remote  
control to switch to VGA mode.  
45  
45  
Brightness  
Contrast  
Colour Temp  
Advanced Picture Adjust  
VGA  
3
Press MENU on the control panel or remote  
control to enter PC setup menu.  
Reset Picture  
4
5
6
Press  
Press  
to enter the Picture menu.  
/
to select an item.  
OK Enter  
Select MENU Exit  
Press  
/
to adjust the scales or options  
settings.  
7
The PC Setup menu can be used to adjust the Picture, Audio, Setting, and Parental  
Control settings.  
- The Picture submenu can be used to adjust the Scenario Mode, Brightness,  
Contrast, Colour Temp, Advanced Picture Adjust, VGA and Reset Picture settings.  
• The Scenario Mode can be set to Standard, Movie, Sport, Concert, Game, or  
User.  
31  
 
• The Colour Temp can be set to Standard, Warm, or Cold.  
• The Advanced Picture Adjust can be set to Noise Reduction, CTI, Backlight  
control, ACM or DCG.  
- Noise Reduction reduces vidual noise without reducing details. Select from Off,  
Low, Medium or High.  
- CTI (Colour Transition Improvement) smoothes out the ediges of color images so  
that colors can be more precisely reproduced.Select from Off, Low, Medium or  
High.  
- Backlight control helps to manually turn down the backlight in dark scenes,  
generating a deeper black color. Press  
/
to adjust the scales from 0-100.  
- ACM (Adaptive Contrast Management) delivers high contrast ratio and optimum  
brightness to produce the best possible picture. It enhances the panel contrast by  
making bright areas brighter and dark areas darker.  
- DCG balances the screen contrast. When the backlight is dark, the image turns  
bright. When the backlight is light, the image turns dark.  
- VGA can be used to adjust the H Position, V Position, Phase, Clock and Auto  
Adjust setting.  
- Reset setting resets settings to the defaults.  
- The Audio menu can be used to adjust the Scenario Mode, Treble, Bass, Balance,  
Sound Effect, and Reset Audio settings.  
• The Scenario Mode can be set to Standard, Movie, Sport, Concert, Game, or User.  
- The Setting menu can be used to adjust the Aspect, Menu Language, DPMS, Blue  
Mute, Sleep, SCART and Reset Setting.  
• The available Aspect selections include Full and Normal.  
• The available Menu Language are English, French, German, Italian, Spanish,  
Portuguese, Dutch and Polish.  
• The Blue Mute can be set to On or Off.  
• The Sleep can be set to Off, 15, 30, 45, 60, 90 or 120 minutes.  
• The SCART mode selections include SCART1, SCART2. SCART1: Auto, Mixed,  
RGB, CVBS, S-Video. SCART2: CVBS, S-Video, Auto, Mixed. The SCART1 can be  
set to AUTO, Mixed, RGB, CVBS or S-VIDEO. The SCART2 can only be set to  
CVBS, S-Video, Auto, or Mixed.  
• Select Reset Setting to reset settings to the defaults.  
32  
 
• The Aspect modes include HDMI, SCART Component, and TV modes for Video  
mode selection. The PC mode selection includes Full and Normal. Please see the  
pictures below for details.  
Normal  
Full  
- The Parental Control requires you to input the set password before you can watch a  
password-protected program. The original password is set to 0000 by default.  
8
9
Press OK to confirm the setting. Press MENU to return to the PC Setup menu.  
Press MENU to exit the OSD menu.  
Note:  
The PC Setup settings are only available in VGA mode.  
33  
 
4
Troubleshooting  
Situation  
Solution  
Connect the power cord properly.  
Check if the power LED is on or not.  
Press  
on the control panel or remote control.  
No picture and sound.  
Press Input to cycle through connected video sources.  
Press PS or PT to switch to other TV programs.  
Make sure all cables are connected properly.  
No picture, or poor picture,  
sound is OK.  
Check the antenna and cable connections.  
Adjust the brightness in the Picture OSD menu.  
Picture is not in color.  
Adjust the colour option in the Picture OSD menu.  
Make sure the source device is functioning properly.  
Make sure the audio cable is connected securely.  
Turn the mute off.  
Picture is OK, no sound.  
Press VOL + on the control panel or remote control.  
One of the speakers has no  
sound.  
Adjust the balance in the Audio OSD menu.  
Cannot receive some TV  
channels using cable TV.  
Try the Auto Scan function in the Channel Management  
OSD menu.  
Use the Reset Setting function in the Setting OSD  
menu.  
Want to reset TV settings.  
If OSD items are colored in gray, the system is in a state  
such that those settings are not available.  
Cannot operate menus.  
Screen image turns over.  
Make sure the video signal cable is connected properly.  
Adjust the location of the antenna, placing it far from  
roads or sources of interference.  
Snow appears on the screen.  
Check the antenna and the video signal line connections.  
Adjust the sharpness setting.  
Blurred or overlapped  
images.  
Choose programs with high quality signals.  
Adjust the direction of the antenna or replace the video  
signal cable.  
Make sure the battery is inserted correctly.  
Replace the battery with a new one.  
Make sure the TV power cord is plugged in.  
Make sure the path between the remote control and the  
sensor is clear.  
Remote control doesn’t work.  
Try operating the remote control at a closer distance to  
the TV.  
34  
 
5
Specifications  
Model No.:  
T281H  
Item  
Specification  
Display panel  
Panel Size  
Screen Format  
Resolution  
TV System  
28 inch TFT LCD  
16:10  
1920 (H) x 1200 (V)  
ATV: PAL, SECAM  
DTV: DVB-T (w/o CI)  
OSD  
English, French, German, Italian,  
Languages  
Spanish, Portuguese, Dutch and Polish  
Audio System SCART1 IN / OUT R/L IN, R/L OUT  
SCART2 IN  
HDMI  
R/L IN  
HDMI1, HDMI2  
AUDIO IN jack (Green)  
Earphone jack (Pink)  
5W x 2  
PC LINE In  
Audio Out  
Built-in Speaker  
Video System  
SCART1 IN/OUT RGB, AV, S-VIDEO  
SCART2 IN  
HDMI  
AV, S-VIDEO  
HDMI 1, HDMI 2  
YPBPR  
Component  
PC  
VGA  
Power  
Power  
Consumption  
Normal operation: 110W (Typical)  
Standby mode: < 1W  
Input Voltage  
Operating Temp.  
Ambient  
AC Input: 100V~240V / 50Hz ~ 60Hz  
Environment  
Physical  
0 ºC ~ 40 ºC  
40 ºC  
Weight  
10 Kg Max.  
35  
 
PC Support Timing  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency  
(Hz)  
Pixel  
Frequency  
(MHz)  
Resolution  
(active dot)  
Mode  
VGA  
SVGA  
640x480@60Hz  
800x600@60Hz  
31.5  
37.8  
48.4  
64.0  
55.9  
65.3  
75.0  
74.1  
59.9  
60.3  
60.0  
60.0  
59.9  
60.0  
60.0  
60.0  
25.2  
40.0  
XGA  
1024x768@60Hz  
1280x1024@60Hz  
1440x900@60Hz  
1680x1050@60Hz  
1600x1200@60Hz  
1920x1200@60Hz  
65.0  
SXGA  
108.0  
106.5  
146.3  
162.0  
154.0  
WXGA+  
WSXGA+  
UXGA  
WUXGA  
HDMI Support Timing  
Input Video Resolution: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p  
36  
 
6
Dissembling the stand base  
1
2
Disconnect all the cables and cords from the TV to prevent breakage.  
Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth,  
etc) to prevent any damage to the TV.  
3
Squeeze the sides to release the retaining plastic tabs and pull the stand cover  
off.  
4
5
Remove the six (6) screws so that the stand base can be removed.  
Gently remove the stand base.  
( For reference only )  
Wall mounting the TV:  
1
Purchase a VESA compatible wall bracket:  
VESA 100 X 200, 6 holes, M4, 8mm, 20 kg.  
2
3
4
Locate your ideal TV position on the wall.  
Fix the wall bracket firmly on the wall.  
Secure the TV to the bracket using the 6  
mount holes on the back and center of the  
TV.  
Note:  
Please read the instructions of your specific wall bracket to properly wall mount  
the TV.  
The pitch of the mounting holes is 100mm horizontally and 100mm vertically.  
The screws type required is metric: M4, 8 mm length.  
The 28" TV stand base can be screwed on a table or a hard surface using the  
hole on the back of the stand base.  
*Installing the LCD TV requires special skill that should only be performed by qualified service  
personnel. Customers should not attempt to do the work themselves. Hannspree bears no  
responsibility for improper mounting or mounting that results in accident or injury. You can ask  
a qualified service personnel about using an optional bracket to mount the TV to the wall.  
37  
 
7
Using the Cable Organizer  
Route the cables through the calbe clamp as shown:  
38  
 

Graco Cooktop 4510 User Manual
Haier Dishwasher DW12 PFE1ME User Manual
Hasbro Games 12669 12668 User Manual
Hotpoint Clothes Dryer NLL113EYWO User Manual
HP Hewlett Packard Camcorder M425 User Manual
HP Hewlett Packard MP3 Player Accessories A6826A User Manual
HP Hewlett Packard Personal Computer 505B User Manual
Hypertec Carrying Case N9608NHY User Manual
Hypertec Carrying Case N16168LHY User Manual
IBM Computer Drive Modbus Plus User Manual