INSTALL INSTRUCTIONS C-TCB-10
1996-2006 FORD TAURUS
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Ratcheting Wrench
3/8” Standard Socket Set
3/8” Metric Socket Set
Powered drill w/ drill bit set
Standard Open-end wrench set
HARDWARE:
QTY DESCRIPTION
PART #
1
1
1
1
1
2
1
2
4
1
5
2
2
1
Pole support assembly
Telescoping pole
Under floor plate
Lateral support brace
Side support brace
¼-20 Nylock nut
5/16-18 Nylock nut
3/8-16 Nylock nut
¼” Flat washer
5/16” Flat washer
3/8” Flat washer
¼-20 x ¾” Hex head bolt
3/8-16 x ¾” Hex head bolt
3/8-16 x 1 ¼” Hex head bolt
CM93071-10
CM93072-1
CM93132
CM93148
CM93149
GSM30016
GSM30017
GSM30018
GSM31005
GSM31006
GSM31007
GSM33001
GSM33027
GSM33029
Always!
ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.
ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
ꢀ Use hardware provided with install kit
SUB ASSEMBLY:
1. Confirm receipt of all hardware and components.
2. Remove front passenger seat base trim.
INSTALLATION:
1. MOUNT POLE SUPPORT ASSEMBLY:
• Align pole support assembly’s slotted hole with similar slot on seat base and loosely
attach using 3/8-16 x ¾” bolt, washer and nut.
• Loosely attach smaller slot on assembly to seat base using ¼-20 x ¾”
• Repeat these processes attaching the side support brace to passenger seat base.
• Now loosely attach the side support brace and lateral (forward) support base to pole
assembly using 5/16” Nylock nut.
|