Portable HEPA
Air Cleaner
READ AND SAVE THESE INSTRUCTIONS
Owner’s Guide
For Model 51130 Series Air Cleaner
The Science of Clean Air®
Congratulations
You now own a quality portable HEPA air cleaner that has been engineered and
crafted for your satisfaction.
Our Consumer Relations representatives will be pleased to help with any questions
or concerns you may have about your Honeywell air cleaner. Please call our
Consumer Relations Dept. at (800) 332-1110 for assistance.
For Best Performance
We recommend that you operate your Honeywell air cleaner 24 hours a day
because indoor air can be quickly contaminated by activity in a room and
infiltration of outside air. While all the air in a room will not be processed by
the air cleaner, the more air circulated through the filter, the more filtered air
returned to the room. Portable air cleaners will be much more effective in
rooms where all doors and windows are closed.
The Honeywell HEPA air cleaner is ready to begin cleaning air as soon as it is
removed from the carton and plugged in. Because it circulates air in a 360
degree pattern around the air cleaner, it can be placed on the floor in almost any
location. However, for best performance the air outlet slot should not be blocked
for at least 1 meter (three feet) in all directions.
Due to the large volume of air drawn towards the air cleaner, surrounding areas
should be cleaned and/or vacuumed frequently to prevent buildup. This may help
keep your home cleaner and may extend the life of your pre-filter. If the unit is
placed on light colored carpeting, a small mat or rug should be used to ease
cleaning and prevent any permanent staining. This is particularly important in
homes with heavier contamination from smoking or fireplaces.
Model 51130 Series
The Honeywell 51130 air cleaner is a 3
speed air cleaner operated by moving the
speed control knob on the top cover from the
“OFF” position to the “super” position. Allow
the unit to operate for a few seconds at
“super”, then leave the control knob in the
“super” position for faster, powerful room
cleaning, or move the knob to a lower setting
for quieter operation.
Features
GENERAL DESCRIPTION OF FEATURES
B
D
G
A. Speed Control/Power Switch
B. Ionizer Control
A
C. Filter-Change Calendars
D. Ionizer Indicator Light
E. Power Indicator Light
F. Air Intake
C
E
F
G. Air Outlet
H. Base
I. Locking Handle
H
I
The Ionizer charges particles in the air which may enhance the air cleaner’s
performance.
Replacement Filters
HEPA Filter
Part Number
Carbon Pre-filter
Part Number
Model No.
51130
Duracraft HEP-5020
Honeywell 38002
Replacement filters may be purchased from the retail store or ordered from the dealer
where you purchased the product. If you cannot locate one, please call our Consumer
Relations Dept. at (800) 332-1110 or e-mail us at: [email protected].
Operation
Step 1: Inspect Air Cleaner upon removal from its container. Remove and discard
any packaging material.
Step 2: Place the air cleaner on a flat, level, unobstructed surface. IF USING THE
IONIZER, DO NOT PLACE THE AIR CLEANER WITHIN THREE FEET OF
ANY COMPUTER OR MAGNETICALLY SENSITIVE DEVICES SUCH AS
FLOPPY DISKS OR TAPES.
Step 3: Make sure that speed control is set to the OFF position. Plug in air cleaner.
Step 4: Set speed control to the “super” position. Allow the unit to operate for a few
minutes at “super”, then leave the control knobs in the “super” position for
faster, more powerful room cleaning, or move the knob to a lower setting for
quieter operation. Set Ionizer control to desired setting, O (Ionizer OFF) or I
(Ionizer ON).
How to Change the Filters
CAUTION: DISCONNECT FROM POWER SUPPLY BEFORE SERVICING
The only two parts requiring any service are the activated carbon pre-filter
Step 2
and the HEPA filter. No tools are needed. To change either filter,
disassemble the unit as described below.
HEPA Filter
with Pre-Filter
Unit
NOTE: Neither the pre-filter nor the HEPA filter are washable.
Locking
Handle
Step 1: Turn the Air Cleaner off and unplug from the wall outlet.
Base
Step 2: To open, gently place the air cleaner on its side and unscrew the
locking handle counter-clockwise to release the BASE from the air
cleaner.
Step 5
Step 3: Remove the BASE.
Step 4: Remove the filter assembly (consisting of the HEPA and pre-filter)
from the internal chamber.
Step 7
Step 5: Locate the seam of the pre-filter and carefully separate the
fastener on the seam from the pre-filter and remove the pre-filter from the
HEPA filter.
Step 6: Discard used filter(s) being replaced. Remove any packaging
and plastic from replacement filter(s). If applicable, see pre-filter
sizing instructions included inside the Universal Pre-filter box
(model 38002).
Step 7: Carefully wrap the pre-filter around the HEPA filter so that the
ends meet. Fasten the ends together with the strap fastener.
Step 8: Place the whole filter assembly into the product chamber.
Close the product by replacing the base and tightening the locking handle.
NOTE: The HEPA filter assembly was designed to easily fit into the power head without
any orientation; there is no top or bottom to the HEPA filter.
Step 9: Turn the air cleaner upright, plug into wall socket and turn on.
Filter Replacement Reminders
Filter Change Schedule: Pre-filter: Replace every 3 months
HEPA filter: Replace every 1-3 years depending on use
Upon start up of your air cleaner and upon every pre-filter replacement, roll the
Pre-filter Change Calendar ahead 3 months to indicate when the next filter
replacement is necessary (Fig. 1).
Upon start up of your air cleaner and upon every HEPA filter replacement, roll the
HEPA Filter-Change Calendar ahead 2 years depending on use (use the month
wheel on the left and the year wheel on the right) to indicate when filter replacement
is necessary (Fig. 2).
Fig. 1
Fig. 2
Troubleshooting
•
•
•
•
Start on highest speed for a few minutes, then adjust to desired speed.
Check to make sure that the power cord is correctly connected to the outlet.
Test that the outlet is functioning properly using another appliance or lamp.
Check the fuse or circuit breaker. The outlet may be overloaded if other appliances
are also in use. Determine and correct the cause of the overload.
•
If none of the above procedures restore operation, return your unit to the store or if the
store's return policy does not allow, return the complete unit per the instructions in the
warranty section of this owner's guide. Do not attempt to repair the unit yourself. Doing
so may cause damage or personal injury and the warranty does not cover damage
resulting from unauthorized attempts to repair or from any use not in accordance with
this manual.
Storage
If you store your Honeywell HEPA air cleaner for more than 30 days,
we recommend:
•
•
•
Remove both the primary HEPAfilter and the activated carbon pre-filter from the unit.
Discard the pre-filter.
Wrap the HEPA filter in an air-tight plastic bag or plastic wrap. Be sure that the
filter is totally sealed.
•
To restore the air cleaner to service, unwrap the HEPA filter, install a new
activated carbon pre-filter, and replace both filters in the air cleaner.
(See "How to Change the Filters" section for proper installation.)
Limited Warranty
Honeywell enviracaire
HEPA Air Cleaner
C. This warranty does not cover
damage resulting from unauthorized
attempts to repair or from any use
not in accordance with this manual.
Model Series 51130
D. This warranty DOES NOT cover
the pre-filter or the HEPA filter except
for material or workmanship defects.
This product has been engineered
and crafted with great care for your
satisfaction. Be sure to fill out and
return the enclosed card within
7 days of purchase.
E. Return defective product to the
following address with a brief description
of the problem. Include proof-of-
A. This limited warranty applies to
repair or replacement of product found
to be defective in material or workmanship
within 3 years of the date of purchase.
This warranty does not apply to damage
resulting from commercial, abusive,
unreasonable use or supplemental
damage. Defects that are the result
of normal wear and tear will not be
considered manufacturing defects under
this warranty. HONEYWELL IS NOT
LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY
NATURE. ANY IMPLIED WARRANTY,
INCLUDING MERCHANTABILITY
OR FITNESS FOR A PARTICULAR
PURPOSE, ON THIS PRODUCT
IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
Some regions do not allow the
purchase and a U.S. $10.00/Can $15.00
check or money order for handling,
return packing and shipping charges.
Please include your name, address and
daytime phone number. You must
prepay shipping charges. Mark carton
“Attention Repair Department”
Ship to:
Honeywell Returns Dept.
4755 Southpoint Drive
Memphis, TN 38118
U.S.A.
In Canada:
Honeywell Consumer Products Canada
510 Bronte St. South
Milton, Ontario Canada L9T 2X6
If you experience a problem with your
air cleaner, please see owner’s guide
for instructions. Please do not attempt
to repair the air cleaner yourself. Doing
so may void the warranty and could
cause damage or personal injury. If
the problem still persists, please call:
exclusion or limitation of incidental or
consequential damages or limitations
on how long an implied warranty lasts,
so the above limitations or exclusions
may not apply to you. This warranty
gives you specific legal rights, and
you also may have other rights which
vary from region to region.
Honeywell
Consumer Relations Dept.
Toll Free 1-800-332-1110.
This warranty applies only to the original
Purchaser of this product.
Mail Questions or Comments to:
B. At its option, Honeywell will repair
or replace this product if it is found to
be defective in material or workmanship
within the warranty period. Defective
product should be returned to the place of
purchase in accordance with store policy
or to Honeywell.
Honeywell
Consumer Relations Dept.
250 Turnpike Road
Southborough, MA01772
U.S.A.
or e-mail us at: [email protected].
© 2000 Honeywell. All Rights Reserved.
AC7022.00
035-00408-000
|