Hunter Fan Fan 20091209 User Manual

Oscillating

Stand Fan

Owner’s Manual

Model

90391

Form# 44830-01

20091209

InTroduCTIon

Thank you for choosing the Hunter Oscillation Stand

Fan. This manual gives you complete instructions for

assembling and using your fan. Here are some the

features you will enjoy with your fan:

3 An attractive design that enhances any decor

3 A powerful motor for maximum air flow

3 Three speeds to adjust your comfort level

3 Remote controlled for added convenience

3 Multiple oscillation settings

3 Timed running mode.

3 Parts of this fan, including the blades and the grill,

have been treated with Hunter’s dust Armor protection,

making them less likely to attract dust and dirt.

safeTy and WarnIngs

REAd THIS EnTIRE MAnUAl CAREFUlly BEFORE

BEgInnIng

InSTAllATIOn.

SAvE

THESE

InSTRUCTIOnS FOR REFEREnCE.

To reduce the risk of fire or electrical shock, dO nOT use

this fan with any solid-state speed control device.

When using electrical appliances, basic precautions

should always be taken to reduce the risk of fire, electric

shock and personal injury:

Read all instructions before using this fan.

1. Improper installation may result in the risk of fire,

electric shock or personal injury.

2. To prevent the risk of fire and electric shock, dO

nOT use the unit near windows. Rain and moisture

may create an electrical hazard.

3. The power plug must be removed from the power

socket when not in use, before cleaning, servicing,

maintenance and before moving to another location.

4. This product is intended for indoor use only. dO

nOT place fan in damp locations where humidity

is present.

44830-01 20091209

5. The fan should be placed on a flat, stable surface or

tabletop to avoid overturning.

6. Use fan only for intended use, as described in this

instruction manual.

7. To protect against electrical shock, dO nOT immerse

unit, plug or cord in water or spray with liquids.

8. Close supervision is necessary when any appliance

is used by or near children.

9. nEvER insert fingers, pencils or any other objects

through the grill when the fan is running.

10. dO nOT operate any appliance with a damaged

cord or plug, after the appliance malfunctions or has

been dropped or damaged in any manner.

11. To disconnect, grip plug and pull from wall outlet.

nEvER pull on cord to disconnect from outlet.

12. AlWAyS use on a dry surface.

13. This product is intended for household use only and

not for commercial or industrial use.

14. dO nOT operate fan in the presence of explosive

and/or flammable fumes.

15. dO nOT place fan or any parts near an open flame,

cooking or any other heating appliances.

16. dO nOT use near curtains, plants, window

treatments, etc.

17. do not mix old and new batteries.

18. do not mix alkaline, standard (carbon-zinc), or

rechargables (ni-cad, ni-mh, etc) batteries

19. This product conforms to Ul STd 507 and is certified

to STd C22.2 no.113

44830-01 20091209

unpaCkIng

As you unpack the fan, save the carton and packing

materials in case you want to move or ship the unit in

the future.

Carefully remove all items from the box.

nOTE: It is best to have someone hold the box while

you lift the fan and the protective packaging out of the

carton.

(2) Nut

Make sure all shipping materials are removed from fan

before operating.

figure 3.

(3) Rear Grill

fan assembly

1. Remove the Plastic nut (2) from the fan motor housing

. Figure 3.

2. Set the Rear grill (3) against the front part of the

Motor Housing with the handle facing up. The 3 pins

on the motor housing should stick through the back

of the Rear grill. Figure 4.

(2) Nut

3. Screw the Plastic nut (2) onto the fan and tightenly

firmly. Figure 4.

figure 4.

4. Remove the Plastic Sleeve from the motor housing

(4) Fan Blade

shaft and discard.

5. Install the Fan Blade (4) by sliding it over the motor

housing shaft, lining up the cut-outs on the back of

the Blade with the Retaining Pins on the Motor shaft.

Figure 5.

6. Screw the Spinner (1) onto the shaft counterclockwise

until secure. Figure 5.

(1) Spinner

7. Open the clips on the Front grill

figure 5.

(5) Front Guard

8. Set the Front gill (5) into the notch on the bottom

of the Rear grill (3) So the Hunter logo is facing

rightside up. Figure 6.

9. Close the clips On the Front grill to hold both grill

pieces in place. Insert the grill screw on the top of the

fan grill and tighten securely.

figure 6.

44830-01 20091209

(7) Telescope Pole

(8) Stand Base

base assembly

stand fan

1. Slide the Telescope Rod (7) into the top of the Stand

Base (8) aligning the 4 screw holes. Figure 7.

2. Secure the Telescope Rod (7) by inserting the 4 base

screws(9) inot the 4 nuts placed on the bottom of the

fan base and tighten securely. Figure 8.

3. Remove the Adjustment Knob(10) by twisting

counter-clockwise and slide the Base Cover(11)

down the Telescope Pole(7) until it covers the Screws

at the Stand Base(8). Figure 9.

figure 7.

figure 8.

figure 9.

figure 10.

(10) Adjustment

Knob

4. Reattach the Adjustment knob and tighten.

5. loosen the Screw in the back of the Fan Assembly.

(9) Screws

6. Slide the Fan Assembly onto the telescope pole of the

base until it rests on the top of the pole. Figure 10.

7. tighten the screw on the back of the fan Assembly

until secure.

Warning: do not force pole into the Stand Base

as damage to the Telescope Pole may occur. do not

overtighten the Base nut or screws.

(11) Base Cover

Height adjustment

1. grip the upper part of the telescope pole and loosen

the Adjustment Knob.

2. Raise or lower the pole to the desired height.

3. Turn the Adjustment Knob until it is secure.

When adjusting the height of the fan, always grip the

pole above the adjustment knob firmly to prevent the

telescoping pole from collapsing.

44830-01 20091209

remoTe baTTery InsTallaTIon

1. Turn the Remote Control over and Remove the Battery

Cover from the back by gently pressing down on the

tab and sliding down on the tab. Figure 11.

2. Insert2“AAA”Batteriesintothebatterycompartment,

ensuring the positive and negative ends of the

batteries are installed correctly.

3. Slide the Battery Cover back and snap into place.

figure 11.

operaTIon - fan/remoTe

0.5H 1H 2H 4H

See Figure 12. for fan operation and Figure 13. for

remote operation.

ON/SPEED - Turns the unit on and adjust the speed of

ON l SPEED

the unit between High, medium, and low.

OSC

OSC - Sets the oscillation mode of the fan.

TIMER

OFF

TIMER - Used to set the running time to 0.5 to 7.5 hours

figure 12.

in 30 min, 0.5 increments.

Note: The digital indicators on the fan will light up to

indicate the timer setting. 0.5 will light up for 30

minutes or 1H and 4H will light up to indicate 5

hours.

OFF - Turns the fan off.

fan IndICaTors

L M H - Indicates the current running speed of the fan.

0.5 1H 2H 4H - Shows the number of hours the timer

is set to run.

- Fan oscillates from left to right.

- Fan oscillates up and down.

- Fan oscillates in a figure 8 motion.

figure 13.

44830-01 20091209

maInTenanCe

This fan is permanently lubricated and will not require

additional lubrication (oil) for the life of the fan.

This fan requires little maintenance and contains

no user serviceable parts. dO nOT try to fix

it yourself. Contact qualified service personnel

if servicing is needed.

Before cleaning, turn fan off and unplug from electrical

outlet. Wipe off excess dust with a lintfree cloth.

To ensure adequate air circulation to the motor, keep vents

located at the rear of the motor housing free from dust

accumulation. A vacuum cleaner hose can be used to

clean these vents.

dO nOT immerse the fan in water or any other liquid.

ClEAnIng THE gRIll And BlAdE:

1. Turn the fan off and unplug from the electrical outlet.

2. disassemble the grills by carefully lifting the latches

around the outer ring.

3. Remove the front grill.

4. The blade may be removed by turning the Spinner

Knob clockwise.

3 Use a dry or slightly damp lint free cloth to clean

the fan. do not use a furniture polish or any other

cleaners that leave any residue, as they will damage

the protective dust Armor.

3 dO nOT allow water or any other liquid to get into

the motor housing or base.

3 Reassemble the fan after blades and grills have dried

completely.

3 dO nOT plug the fan into an electrical outlet until it

has been fully reassembled.

44830-01 20091209

1. Problem

3 Fan will not oscillate.

Solution

3 Push down on the knob on top of motor housing to

activate oscillation.

2. Problem

3 Can not adjust the angle of the fan.

Solution

3 gentle grasp the grill of the fan and tilt up or down.

3. Problem

3 Remote control will not operate.

Solution

3 Remove the battery cover and confirm the batteries

are installed correctly according to polarity markings.

TeCHnICal supporT

If you have any additional questions or problems with

your Hunter Portable Fan, please call:

USA: 1-888-830-1326

Canada: 1-866-268-1936

Hours of operation are from 7:00 am to 7:00 pm

Monday - Friday and 8:00 am to 5:00 pm on Saturday,

Central Time. you may also contact us over the Internet at

www.hunterfan.com.

WarranTy

The Hunter Fan Company makes the following limited

warranty to the user or consumer purchaser of this Hunter

Portable fan:

If your Hunter Portable Fan motor fails at any time within

one year after the date of sale to you due to a defect in

material or workmanship, labor to repair the defect will

be provided free of charge at our nearest service center

or our Service department in Memphis, Tennessee. you

will be responsible for labor costs after this one-year

period. The foregoing limited warranty applies only to

the motor itself, and does not apply to electronic controls

44830-01 20091209

such as remote controls, remote control receivers or

transmitters used in conjunction with the motor. These

electronic control items are included in the one year

limited warranty below.

If any part of your Hunter Portable Fan other than the

motor fails at any time with one year after the date of

sale to you due to a defect in material or workmanship,

we will repair or, at our option, replace the defective

part free of charge for parts and labor performed at our

nearest service center or at our Service department in

Memphis, Tennessee.

IF THE USER OR COnSUMER PURCHASER CEASES TO

OWn THE FAn, THIS WARRAnTy And Any IMPlIEd

WARRAnTy WHICH THEn REMAInS In EFFECT,

InClUdIng BUT nOT lIMITEd TO Any IMPlIEd

WARRAnTy OF MERCHAnTABIlITy OR FITnESS FOR A

PARTICUlAR PURPOSE, ARE vOIdEd. nO WARRAnTy,

EXPRESSEd OR IMPlIEd, InClUdIng Any WARRAnTy

OF MERCHAnTABIlITy OR FITnESS FOR A PARTICUlAR

PURPOSE, IS MAdE In RESPECT TO THE glASS glOBES

OR lIgHT BUlBS OR THE FInISH On Any METAl

PORTIOn OF THE FAn. THIS WARRAnTy IS In lIEU

OF All OTHER EXPRESS WARRAnTIES. THE dURATIOn

OF Any IMPlIEd WARRAnTy, InClUdIng, BUT

nOT lIMITEd TO Any IMPlIEd WARRAnTy OF

MERCHAnTABIlITy OR FITnESS FOR A PARTICUlAR

PURPOSE, In RESPECT TO Any HUnTER FAn MOTOR

OR OTHER FAn PART, IS EXPRESSly lIMITEd TO THE

PERIOd OF THE EXPRESS WARRAnTy SET FORTH

ABOvE FOR SUCH MOTORS And OTHER PARTS.

This warranty is voided if your Hunter Fan is not

purchased and used in the USA.

This warranty excludes and does not cover defects,

malfunctions or failures of any Hunter Portable fan

which were caused by repairs by persons not authorized

by us, use of parts or accessories not authorized by

us, mishandling, improper installation, modifications,

or damage to the Hunter Portable fan while in your

possession, or unreasonable use, including failure to

provide reasonable and necessary maintenance.

To obtain servicing, contact the nearest Hunter authorized

service center or the Hunter Fan Company Service

department, 7130 goodlett Farms Pkwy. Suite 400,

44830-01 20091209

Memphis, Tennessee 38016. Please contact us before

shipping your fan to us. If we authorize you to ship it to

us, you will be responsible for all insurance and freight

or other transportation charges to our factory service

center. We will return your Hunter Fan freight prepaid.

your portable fan should be properly packed to avoid

damage in transit since we will not be responsible for

any such damage. Proof of purchase is required when

requesting warranty service. The purchaser must present

sales receipt or other document that establishes proof of

purchase.

In nO EvEnT SHAll HUnTER FAn COMPAny BE

lIABlE FOR COnSEQUEnTIAl OR InCIdEnTAl

dAMAgES.

SOME STATES dO nOT AllOW lIMITATIOnS On

HOW lOng An IMPlIEd WARRAnTy lASTS OR

THE EXClUSIOn OR lIMITATIOn OF InCIdEnTAl

OR COnSEQUEnTIAl dAMAgES SO THE ABOvE

lIMITATIOn MAy nOT APPly TO yOU.

THE WARRAnTy gIvES yOU SPECIFIC lEgAl RIgHTS

And yOU MAy AlSO HAvE OTHER RIgHTS WHICH

vARy FROM STATE TO STATE.

produCTs

Fan Company

7130 goodlett Farms Pkwy., Suite 400

Memphis, Tennessee 38016

To learn more about Hunter

Fan Company products,

please see our Web page at:

www.hunterfan.com

Printed in china and Taiwan

44830-01 20091209

Graco Inc Paint Sprayer 232630 User Manual
Hamilton Beach Slow Cooker 33138 User Manual
Havis Shields Indoor Furnishings KR 9 0 FX User Manual
Heatcraft Refrigeration Products Refrigerator H IM 82B User Manual
Heatiator Indoor Fireplace CB4236IR User Manual
HP Hewlett Packard Hunting Equipment HP54501A User Manual
HP Hewlett Packard Laptop 4000CT User Manual
Hubbell Work Light UE28 User Manual
Husqvarna Snow Blower 1330SB XLSB User Manual
iLive MP3 Docking Station IB318B User Manual