Model iP29
Portable Stereo Speakers for
your iPod / iPhone ®
off
on
Table of Contents
iP29 Quick Start
1
2
Controls and Indicators
Using the iP29
3-4
5
A Consumer Guide to Product Safety
Trouble Shooting
6
Warranty Information
7
A Consumer Guide to Product Safety
IMPORTANT SAFETY INFORMATION: IT IS THE USER'S RESPONSIBILITY TO USE THIS PRODUCT PRUDENTLY,
RESPONSIBLY AND IN A SAFE, NON-DISTRACTED MANNER AT ALL TIMES. FAILURE BY THE USER TO PAY
FULL ATTENTION TO THE PROPER OPERATION OF ANY EQUIPMENT BEING USED ALONG WITH THIS
PRODUCT COULD RESULT IN AN ACCIDENT AND/OR PERSONAL INJURY.
iP29 Quick Start
1:batteries
2:AC adaptor
on
off
l i n e - i n
Open battery compartments located to left and right
inside unit. Insert 4 “AA” batteries (not included) as
indicated on diagram. Unit can now play iPod/iPhone.
Batteries will not charge iPod/iPhone.
Connect AC adaptor to the DC jack (rear of iP29) and plug
the other end into a working wall socket to charge and play
iPod/iPhone. Does not charge batteries.
iPod nano 4G
insert 17
iPod touch 2G
insert 16
iPhone 3G
Use this insert
insert 15
For this
iPhone/iPod
iPhone 3G
iPod touch 2G
iPod nano 4G
NOTE: If you do not have an insert for your iPod, please visit
3:inserts
4:iPod/iPhone
off
on
Select the dock insert for your iPod/iPhone model from the
table above and place insert in dock.
Gently place iPod/iPhone on the connector plug in dock.
Slide Power Switch to ON. Unit and iPod/iPhone will
turn on. Adjust volume by pressing the + or – Button.
Never dock an iPod/iPhone without an insert in place.
1
Controls and Indicators
Front Panel
Speaker
Left Battery Compartment
Dock
off
on
Right Battery Compartment
_
Volume “ ”
(lowers volume)
Off/On Switch
Volume “+”
(raises volume)
Rear Panel
l i n e - i n
AC Adaptor Jack
Line-in Jack
2
Using the iP29
Installing/Replacing Speaker Batteries
FOR PORTABLE LISTENING
1. Open the battery compartment covers located on the left and right inside the unit.
2. Insert 4 “AA” batteries (2 in each compartment), checking the + and – ends of the
batteries match the drawings inside the battery compartments. We recommend the
use of alkaline batteries for longer life. Different types of batteries or new and used
batteries are not to be mixed.
on
3. Close the compartment cover.
off
NOTE: Unit will not charge iPod/iPhone while operating on battery power
Battery Compartment
Batteries Information
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Make sure you dispose of batteries properly (see your local regulations).
Connecting the AC Adaptor
Connect the AC adaptor cable plug into the DC jack located under the black tab on
the back of the unit, then plug the AC adaptor into the wall outlet. When connected
to the AC adaptor, the iP29 charges and lets you play your iPod/iPhone.
NOTE: This AC adaptor is for use with the iP29 only. To avoid damage, do not use
other adaptors with iP29.
l i n e - i n
Playing and Charging your iPod/iPhone
1. Place proper insert for your iPod/iPhone (see insert table on Quick Start Section) in Dock, then gently dock iPod/iPhone.
When docked and connected to AC power, the iPod/iPhone will charge until fully charged. The iPod/iPhone will not
overcharge.
2. Switch the Power On/Off Switch to “ON” to play iPod/iPhone and the power on indicator will light up to show iP29 is
on.
3. Press the + or – Button to adjust the volume.
4. To switch off the unit, slide the Power On/Off Switch to “OFF”. It will switch off both iP29 and your iPod/iPhone.
NOTE: If the Power On/Off Switch is in the ON position when you dock an iPod/iPhone that is paused or off the iPod/iPhone
will autoplay (turn on and begin playing).
3
Using iP29
Using the Line-in Jack
1. Plug one end of a standard audio patch cord (not included) into the headphone or line-out jack on your audio device and
the other end of the patch cord into the iP29 Line-in Jack.
2. Switch the Power On/Off Switch to “ON” and the power on indicator will light up to show iP29 is on. You need to set
your device to play too.
3. Press the + or – Button to adjust the volume. You may need to adjust your device’s volume, too.
4. To switch off the unit, slide the Power On/Off Switch to ‘OFF’. Do remember to switch off your device, too.
4
A Consumer Guide to Product Safety
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However,
improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully
before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in
these instructions and on the unit.
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink,
laundry tub, swimming pool or in a wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For
example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it
should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through
the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances
(including amplifiers) that produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions
or as marked on the appliance.
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where
it is plugged into an AC socket.
6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning
instructions.
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings
or vents located on the product.
8. Attachments – Do not use attachments not recommended by the product manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable
system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage
to the product due to lightning and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in
a risk of fire or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power
cable should be unplugged from the unit to prevent damage or corrosion.
13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating
instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel.
or call 1-800-288-2792 Toll Free
5
Trouble Shooting
Symptom
Possible Problem
Solution
Unit doesn’t respond
(no power)
AC adaptor isn’t plugged into a wall outlet
or the connector is not plugged into the
power supply jack on the back of the dock
Plug the AC adaptor into a wall outlet and plug the
connector into the supply jack on the unit
Plug another device into the same outlet to confirm the outlet
is working. Make sure any associated power switch is ON
Wall outlet is not functioning or switched off
Batteries are weak or dead
Replace with new batteries
iPod/iPhone does not
dock properly
Using no or wrong iPod/iPhone insert
iPod/iPhone not installed properly
Make sure the dock insert is the proper fit for your iPod/iPhone
Remove your iPod/iPhone from the dock and check for
obstruction on the connectors in the dock and on your
iPod/iPhone. Make sure there is no “skin” or case on the
iPod/iPhone. Then reseat it in the dock.
iPod/iPhone does
not respond to the
unit
Remove your iPod/iPhone from the dock and check for
obstruction on the connectors in the dock and on your
iPod. Then reseat it in the dock.
iPod/iPhone is not installed properly
Upgrade software on your iPod/iPhone via iTunes
Your iPod/iPhone software is too old
iPod/iPhone is locked up
Please make sure your iPod/iPhone is working properly
before docking into the unit. Please refer to your
iPod/iPhone manual for details.
Using 1st or 2nd generation iPod, iPod
shuffle or other devices.
Unit cannot control those iPod models or other devices.
Use the Line-in jack to play these devices.
iPod/iPhone does not
come on immediately
If your iPod/iPhone is not used for some
time, it may enter deep sleep mode
Press the Menu button on your iPod/iPhone
Charge your iPod/iPhone for about 5 minutes
iPod/iPhone battery is run down or is too weak
6
Limited 90-Day Warranty Information
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects
in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this
fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI Technologies will
repair or, at its discretion, replace this product without charge (except for a $10.00 charge for handling, packing, return UPS/postage, and
insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed
below. The product must include proof of purchase, including date of purchase. The fee for service without proof of purchase is $35.00.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are
the most common cause of problems encountered.
If service is still required:
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty period.
3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $10.00 ($35.00 without proof of purchase).
4. Send the unit prepaid and insured, to the Factory Service Center listed below.
Consumer Repair Department
SDI Technologies Inc.
1330 Goodyear Drive
El Paso, TX 79936-6420
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have
been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii)
cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv)
the cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser.
In no event will SDI Technologies or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable
to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do
not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding
to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI Technologies product.
© 2009 SDI Technologies, Inc. All rights reserved
or call 1-800-288-2792 Toll Free
7
iP29-062609-A
Printed in China
|