Installation Instructions
Front Bumper
Part No. 24597
For ZTS 7500 or ZT 7000
(Items 27768, 27770, 27772 or 27774)
2
Kit Contents:
Ref Part No. Qty. Description
1
2
3
1727006
1927557
1923325
1
4
4
Bumper Assembly
Nut, Flange Lock, 5/16-18
Capscrew, Hex, 5/16-18 x 7/8
3
1
Figure 1. Contents
B
C
D
D
C
A
Figure 2. Bumper Installation (Footrest and Spindles
Ghosted for Clarity)
A. Bumper
B. Frame
C. Capscrews, 5/16-18 x 7/8
D. Nut, Flange Lock, 5/16-18
WARNING
Before beginning any service work turn off the
PTO, set the parking brake, turn off the ignition,
remove the key, and disconnect the spark plug
wire(s).
INSTALLATION
1. Attach bumper (A, Figure 2) to frame (B) securing
with 5/16-18 x 7/8 capscrews (C) and 5/16-18 flange
lock nuts (D).
Note: Lift front of bumper up while tightening hardware to
prevent wheels from contacting bumper.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
TP 200-4056-04-AT-C
1726916-04
1
|