Correct Mobile Computer Insertion / Removal
For correct insertion onto the cradle, insert the mobile computer from the top of the cradle and push it down
firmly.
Datalogic Skorpio™ Serial/Modem Cradle
The Datalogic Skorpio™ Serial/Modem Cradle is
a
battery charger and also functions as
a
serial
communication interface between the host computer (RS232) and the RS232 contacts on the Datalogic
Skorpio™ mobile computer.
A
B
Figure 2 - Mobile Computer Insertion
To remove the mobile computer from the Datalogic Skorpio™ cradle, simply pull it upwards while holding the
cradle firmly down.
TECHNICAL FEATURES
Electrical Features
Power supply *
Consumption
9 VDC Min – 30 VDC Max
12 W Max
Indicators
Power LED
Charge time
4 Hours (Li ION batteries)
Communication Features
Interface
C
RS232
Baud rate
9600 - 115200
Environmental Features
Working temperature
Storage temperature
Humidity
Degree of protection
Mechanical Features
Dimensions
E
0° to +50 °C **
-20 °C to +60 °C
90% non condensing
IP20
D
Figure 1 – Datalogic Skorpio™ Serial/Modem Cradle General View
Key:
85 x 106 x 90 mm
350 g
Weight
A)
B)
C)
D)
E)
Battery recharge and RS232 contacts
Power indicator LED
*
Recommended DL power supply: FPS18.
** Batteries must be charged at a temperature ranging from 0° to 45 °C.
Connector for host computer connection (RS232)
Power supply connector
Modem connector
Data can be transmitted to the Host launching the communication software on the mobile computer and then
inserting it into the cradle slot. By inserting the mobile computer into the cradle, the mobile computer battery
charging starts.
822000731 (Rev. A)
|