®
Epson Stylus NX620/625 Series
3 Select language
To select English as your language, press OK.
Start Here
Read these instructions before using your product.
1 Unpack
Note: If you want to change the language, press
then press OK.
or
to select it,
4 Install ink cartridges
1
Lift up the scanner, then open the cartridge cover.
French control
panel stickers
Power cord
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Shake the ink cartridges gently 4 or 5 times, then
unpack them.
2 Turn on and adjust
1
Connect the power cable.
3
Remove only the yellow tape from each cartridge.
Caution: Do not connect to your computer yet.
2
Press the
On button, then raise the control panel.
Caution: Don’t remove any other seals or the cartridges may leak.
To lower the control panel, press the release bar underneath
and push the control panel down.
Caution: To avoid damaging your Epson Stylus NX620/625 Series,
always press the release bar to lower the control panel.
*411835000*
*411835000*
4
Insert the cartridges in the holder for each color.
3
4
5
Slide the edge guide to your paper size.
5
6
Press each cartridge down until it clicks.
Load paper against the edge guide, with the glossy or
printable side face-down.
Note: Make sure the paper is loaded against the edge guide
and not sticking out from the end of the cassette.
Close the cartridge cover. Press down until it clicks. Then
lower the scanner.
Slide the edge guides against the edges of the paper,
but not too tightly.
7
Wait while the ink delivery system primes. Priming takes
about 5 minutes.
Note: Your printer ships with full cartridges and part of the ink from
the first cartridges is used for priming the printer.
Caution: Don’t turn off the printer while it is priming or you’ll
waste ink.
5 Load paper
6
Keep the cassette flat as you insert it.
1
Pull out the paper cassette.
Note: The paper may slide forward slightly as you insert the
cassette. This is normal.
2
Slide the edge guides to the sides of the cassette.
7
Extend the output tray and flip up the paper stopper.
Windows: If you see the AutoPlay window, click Run Setup.exe. If
you see the User Account Control screen, click Yes or Continue.
6 Choose your connection
Macintosh®: Double-click the
Epson icon, if necessary.
You can connect your printer to your existing network (wireless
or wired) or directly to your computer using a USB cable (not
included). See below for details on each connection method.
3
Click Install and follow the on-screen instructions.
Wireless Connection
You must install the software on every computer from which you
want to print. For the first installation, we recommend using a
USB cable (not included) to simplify wireless setup. After the
printer is connected to the network, you will be prompted to
remove the cable.
If you’re using Mac OS® X 10.6 or don’t have a USB cable, you
will need to use the buttons on the printer to select wireless
settings.
Control panel overview
Make sure you know your network name (SSID) and network
password:
Crop photos,
Turn
change number
of photos
Select
number
of copies
power
on/off
LCD
Cancel copying/
printing/settings
displayed
screen
• Network name
• Network password
Display/Crop
If you don’t have this information, contact the person who set up
your network.
Help
Direct USB Connection
Make sure you have a USB cable (not included). Do not connect
the printer to your computer until you’re instructed to do so.
Show wireless
network status
Display
Help
Move cursor
and select
Start
copying/
printing
menu
photos/menus/
settings
Wired Ethernet® Connection
Return to top
Display
detailed
settings
Return to
previous
menu
Make sure you have an Ethernet network cable (not included).
You must install the software on every computer from which you
want to print.
menu, switch
between
modes
Any questions?
7 Install software
Quick Guide
1
Make sure the printer is NOT CONNECTED to your
Basic instructions for copying, printing, scanning, and
network setup.
computer.
Windows®: If you see a Found New Hardware screen, click
Cancel and disconnect the USB cable. You can’t install your
software that way.
User’s Guide
Click the desktop shortcut to access the online User’s Guide,
software downloads, Epson Supplies CentralSM, and more
(requires an Internet connection).
2
Insert the product CD.
|