Installing the Suction Cup Mount
Finding Places and Routing to Them
Stopping & Starting Routes and Adding Via Points
Quest™ 2 Quick Reference Guide
Use this Quick Reference Guide to learn how to perform common
operations with your Quest 2. For a more thorough and detailed
explanation of operations and features, consult the Owner’s Manual.
Keep this guide in a handy place for future reference.
To install the vehicle suction cup mount:
To find a place and route to it:
1. Press the FIND key. A Find page appears.
To stop or resume the current route:
1. Press the MENU key, highlight Route Options, and press OK. A Route
Options menu appears.
1. Align the ball on the end of the suction mount with the socket (hole)
on the back of the cradle. Press firmly to snap the mount and cradle
together.
2. Highlight an option that will help you find your destination, such as Auto
Fuel, Food & Drink, or Lodging. Press the OK key. A list of places near
your current location appears.
2. Highlight Stop Navigation or Resume Navigation, and press OK to
2. Flip up the antenna on the back of the unit. Angle the Quest forward
and fit the bottom of the Quest into the cradle. Tilt the unit back until it
snaps in place.
stop or start the active route.
3. Highlight the place you wish to visit, and press OK. An information
page appears. (If you know you will want to visit this place again, select
Save to add it to your My Locations list.)
To add via points (extra stops) during a route:
1. Press the MENU key, highlight Route Options, and press OK. A Route
Options menu appears.
Turning the Quest On
Press and hold the Power
3. To ensure a tight grip, clean and dry your windshield before you mount
the suction cup. Flip the lever on the suction cup toward you.
key on the front of the unit to turn it on.
4. Highlight Route To on the information page, and press OK. Your Quest
2. Highlight Vias, and press OK. An information page for your current
Vehicle Installation
4. Place the suction cup on your windshield. Flip the lever back, toward
the windshield.
calculates the route. Follow the calculated route to the destination.
route appears.
Select a suitable location for installing the unit that allows routing of
the power cord and does not interfere with vehicle operation. Refer to
the safety warnings in the Owner’s Manual. Select a location where the
Quest’s flip-up antenna has an unobstructed view of the sky. For optimal
use, position the antenna parallel to the surface of the road.
To find an address and route to it:
1. Press the FIND key, highlight Addresses, and press OK.
3. Use the Rocker pad to highlight the Via Points box, and press OK.
5. Plug the power cable into an available receptacle.
4. Highlight <Select to add via point>, and press OK. A window appears
2. A Wizard opens. Highlight the state if it appears on a button, or choose
with three options for finding your location.
Select State and find the correct name. Press OK.
5. Select one of the three options. Once you select an option, the new via
point appears on your route page.
3. Highlight Search All Cities, and press OK. You can also highlight
Spell City, and press OK. Enter the city using the on-screen keyboard.
6. To add more via points, repeat steps 4 and 5 above.
Release
4. Enter the address number and street using the on-screen keyboard.
For intersections, you only need to enter street names.
7. Highlight Navigate, and press OK when you are done. Your original
route is automatically recalculated to include the newly-added via
point(s).
tab
5. A list of addresses appears. Highlight the desired address, and press
NOTICE TO STATE OF CALIFORNIA DRIVERS: California Vehicle Code Section 26708 (a) (1) provides
that drivers in California should not use suction mounts on their windshield or side or rear windows. Other Garmin
dashboard or friction mounting options should be used. For available accessories, refer to the Garmin Web site at
www.garmin.com. Also, refer to the Owner’s Manual for instructions on using the included mounting disk with the
suction cup mount.
OK. An Address page appears.
6. To create a route to this address, highlight Route To, and press OK.
© Copyright 2006 Garmin Ltd. or its subsidiaries
Suction
cup tab
January 2006
190-00556-11 Rev. A
Printed in Taiwan
Cradle
Lever
|