Insignia Clock NS CLBT01 B User Manual

User Guide  
Digital Clock Radio with Bluetooth  
NS-CLBT01-B  
NS-CLBT01-W  
Before using your new product, please read these instructions to prevent any damage.  
 
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
Important safety instructions  
1
2
3
4
5
6
7
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
Do not block any ventilation openings. Install in accordance with the  
manufacturer's instructions.  
8
9
Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
Do not defeat the safety purpose of the polarized or grounding-type plug.  
A polarized plug has two blades with one wider than the other. A  
grounding type plug has two blades and a third grounding prong. The  
wide blade or the third prong are provided for your safety. If the provided  
plug does not fit into your outlet, consult an electrician for replacement of  
the obsolete outlet.  
10 Protect the power cord from being walked on or pinched particularly at  
plugs, convenience receptacles, and the point where they exit from the  
apparatus.  
11 Only use attachments/accessories specified by the manufacturer.  
12 Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
13 Refer all servicing to qualified service personnel. Servicing is required  
when the apparatus has been damaged in any way, such as power-supply  
cord or plug is damaged, liquid has been spilled or objects have fallen into  
the apparatus, the apparatus has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
14 To reduce the risk of fire or electric shock, do not expose this device to  
rain, moisture, dripping, or splashing, and no objects filled with liquids,  
such as vases, shall be placed on it.  
15 The wall plug is the disconnecting device. The plug must remain readily  
operable.  
16 Batteries should not be exposed to excessive heat such as sunshine, fire, or  
the like.  
Caution  
Danger of explosion if battery is incorrectly replaced. Replace  
only with the same or equivalent type.  
3
 
 
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
Features  
Top buttons  
3
5
7
1
2
4
6
Pair / Preset  
Sleep  
1
2
Source  
9
10  
Description  
8
#
Item  
1
Pair/Preset  
button  
Press and hold for six seconds to pair your radio with a Bluetooth  
device. See “Playing audio from a Bluetooth device” on page 12.  
In Bluetooth mode, quickly press and release to start or stop playback.  
See “Playing audio from a Bluetooth device” on page 12.  
In FM mode, press to program a radio station preset or to tune to a  
preset radio station. See “Programming a radio station preset” on  
page 11 or “Tuning to a preset radio station” on page 11.  
2
3
Sleep  
button  
Press to set the time or the sleep timer. For more information, see  
“Setting the time” on page 8 or “Setting the sleep timer” on page 10.  
(previous/fast reverse) button In Bluetooth mode, quickly press and release to go to the previous  
song.  
In FM mode, press and hold for one second to go to the next lower  
radio station, or quickly press and release to manually tune to a lower  
radio frequency.  
1
4
5
(Alarm 1) button  
Press to set Alarm 1. See “Setting the alarm sound” on page 9 and  
“Setting the alarm time” on page 9.  
(next/fast forward) button  
In Bluetooth mode, quickly press and release to go to the next song.  
In FM mode, press and hold for one second to go to the next higher  
radio station, or quickly press and release to manually tune to a higher  
radio frequency.  
2
6
7
(Alarm 2) button  
Press to set Alarm 2. See “Setting the alarm sound” on page 9 and  
“Setting the alarm time” on page 9.  
SNOOZE / DIMMER  
button  
When the alarm turns on, press to turn off the alarm for 10 minutes.  
See “Using the snooze feature” on page 10.  
Press to adjust the LCD brightness. See “Adjusting the LCD brightness”  
on page 11.  
4
 
   
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
#
Item  
Description  
8
Source  
(source/standby) button When your radio is turned off (in standby mode), press to turn it on.  
See “Playing your radio” on page 10.  
When your radio is turned on, quickly press and release to switch  
between playing the radio, a Bluetooth device, or connected audio  
device. See “Playing audio from a Bluetooth device“ on page 12 or  
“Connecting an audio device” on page 13.  
9
(volume down) button  
Press to decrease the volume. While you are adjusting the volume, the  
“Volume” icon lights and the current volume level (1 through 15)  
appears in the middle of the LCD.  
10  
(volume up) button  
Press to increase the volume. While you are adjusting the volume, the  
“Volume” icons lights and the current volume level (1 through 15)  
appears in the middle of the LCD.  
Back  
Picture?  
5.4V  
1.1A  
USB  
AUX  
1
2
3
#
Item  
Description  
1
DC IN jack  
Connect the AC/DC power adapter to this the jack. See “Connecting the  
AC/DC power adapter” on page 8.  
2
3
USB port  
AUX jack  
Connect a device with a micro USB or mini USB cable to charge the  
device’s battery. See “Charging a device’s battery” on page 13.  
Connect an audio device to this jack to play the audio from the device  
through the radio speakers. See “Connecting an audio device” on  
page 13.  
5
 
 
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
LCD  
6
1
2
7
Volume Preset  
AUX FM BLUETOOTH  
8
9
AM  
PM  
3
10  
MHz  
12:08  
Buzzer  
11  
12  
13  
Buzzer  
2 Radio  
4
5
SLEEP  
1 Radio  
#
Icon  
Description  
1
Preset  
When you are programming a radio station preset, the “Preset” icon lights and the next  
available preset number (P-01 through P-10) appears in the middle of the LCD. When you  
exit programming mode, these indicators disappear. See “Programming a radio station  
preset” on page 11.  
When you tune to a radio station preset, the preset number (P-01 through P-10) appears.  
See “Tuning to a preset radio station” on page 11.  
2
Volume  
After you select the alarm sound, this icon indicates that you can change the volume of the  
alarm. See “Setting the alarm sound” on page 9.  
While you are adjusting the radio volume, the “Volume” icon lights and the current  
volume level (1 through 15) appears in the middle of the LCD. When you stop adjusting  
the alarm or radio volume, these indicators disappear.  
3
4
5
6
Current time  
Sleep  
Displays the current time.  
Lights when the sleep timer is active. See “Setting the sleep timer” on page 10.  
Lights when Alarm 1 has been set. See “Setting the alarm time” on page 9.  
Alarm 1  
AUX  
Lights when a connected audio device is selected as the audio source. See “Connecting an  
audio device” on page 13.  
7
Bluetooth  
Lights when a paired Bluetooth device is selected as the audio source. See “Playing audio  
from a Bluetooth device” on page 12.  
8
9
FM  
Lights when the radio is selected as the audio source.  
AM/PM  
“AM” lights after midnight and before noon. “PM” lights after noon and before midnight.  
10 Bluetooth logo  
Blinks slowly if you select Bluetooth as the audio source and no Bluetooth device is  
connected.  
Blinks quickly while pairing with a Bluetooth device.  
Lights solid when a Bluetooth device is connected.  
See “Playing audio from a Bluetooth device” on page 12.  
11 Snooze  
12 Battery  
Lights when your radio is in snooze mode. See “Using the snooze feature” on page 10.  
Lights when no backup batteries are installed or when the backup battery charge is low.  
6
 
 
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
#
Icon  
Description  
13 Alarm 2  
Lights when Alarm 2 has been set. See “Setting the alarm time” on page 9.  
Package contents  
Digital clock radio with Bluetooth  
AC/DC power adapter  
Quick Setup Guide  
User Guide  
Setting up your radio  
Installing backup batteries  
The backup batteries provide power to backup your settings when you  
unplug the AC/DC power adapter.  
Cautions  
• Use only the size and type of batteries specified.  
• Do not mix old and new batteries.  
• Make sure that you follow the correct polarity as indicated in the  
battery compartment.  
• Do not try to recharge batteries not intended to be recharged. They  
can overheat and rupture. (Follow the battery manufacturer’s  
directions.)  
• Do not throw batteries into a fire. Dispose of used batteries as  
hazardous waste.  
Note  
If you unplug the AC/DC power adapter and the backup batteries are dead or  
not installed, the time setting is lost.  
To install backup batteries:  
1
Push the latch to release the battery compartment cover on the  
bottom of your radio, then lift the cover off the battery compartment.  
1
2
AAA  
AAA  
7
 
     
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
2
3
Insert two AAA batteries (not included) into the battery compartment.  
Make sure that the + and – symbols on the batteries align with the +  
and – symbols inside the compartment.  
Insert the tab on the battery compartment cover into the slot on the  
battery compartment, then press the cover down until it clicks into  
place.  
Connecting the AC/DC power adapter  
Note  
If you unplug the AC/DC power adapter and the backup batteries  
are dead or not installed, the time setting is lost.  
To connect the AC/DC power adapter:  
1
Plug the small connector on the power adapter into the DC IN jack on  
the back of your radio.  
2
Plug the other connector on the power adapter into a power outlet.  
Using your radio  
Setting the time  
Note  
“AM” or “PM” appears on the LCD to the right of the time. When  
you set the time, make sure that the “AM” or “PM” displays  
correctly.  
To set the time:  
1
Press Sleep  
the LCD.  
for about two seconds until the hour digits blink on  
to increase the hour or press or to decrease the  
2
Press  
hour.  
or  
3
4
Press Sleep  
again. The minutes digits blink on the LCD.  
to increase the minutes or press or to decrease  
Press  
or  
the minutes.  
5
Press Sleep  
mode.  
again to save the time setting and exit time setting  
8
 
     
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
Setting the alarm sound  
Your radio has two alarms and can play the buzzer or the radio for the  
alarm sound. You can use the same alarm sound for both alarms or set one  
alarm to use the buzzer and the other alarm to use the radio.  
To set the alarm sound:  
1
2
1
2
1
Press  
the LCD.  
(Alarm 1) or  
(Alarm 2). The  
or  
icon blinks on  
1
2
2
To use the radio as the alarm sound, press  
(Alarm 1) or  
(Alarm 2)  
1Radio  
2Radio  
once. The  
or  
icon blinks on the LCD and the alarm sound  
is set to the radio. Wait three seconds to save the setting and exit alarm  
sound setting mode. When the alarm turns on, the last tuned radio  
station plays.  
OR  
1
To use the buzzer as the alarm sound, press  
(Alarm 1) or  
Buzzer  
1
Buzzer  
2
2
(Alarm 2) twice. The  
or  
icon blinks on the LCD and  
the alarm sound is set to the buzzer. Wait three seconds to save the  
setting and exit alarm sound setting mode.  
1
2
3
To completely turn off the alarm, press  
(Alarm 1) or  
(Alarm 2)  
1
2
repeatedly until the  
or  
icon disappears from the LCD.  
Setting the alarm time  
Your radio has two alarms that you can set for different times.  
Note  
“AM” or “PM” appears on the LCD to the right of the time. When  
you set the time, make sure that the “AM” or “PM” displays  
correctly.  
To set the alarm time:  
1
2
1
2
3
4
5
Press and hold  
(Alarm 1) or  
(Alarm 2) for about two seconds  
until the hour digits blink on the LCD.  
Press  
hour.  
or  
to increase the hour or press  
or  
to decrease the  
1
2
Press  
(Alarm 1) or  
(Alarm 2) again. The minutes digits blink on  
or to decrease  
(Alarm 2) again. The Volume icon appears on  
the LCD.  
Press  
or  
to increase the minutes or press  
the minutes.  
1
2
Press  
(Alarm 1) or  
the LCD and the time digits blink.  
9
 
   
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
6
7
Press  
or  
to increase the alarm volume or press  
or  
to  
decrease the alarm volume. The alarm volume range is from 1 to 15  
with 15 being the loudest setting. The default setting is 10. While you  
are adjusting the volume, the “Volume” icon lights and the current  
volume level number appears in the middle of the LCD.  
1
2
Press  
(Alarm 1) or  
(Alarm 2) again to save the time setting and  
exit alarm setting mode.  
Using the snooze feature  
Note  
SNOOZE / DIMMER  
You can press  
(SNOOZER/DIMMER) a total of six  
times. If you press it a seventh time, the alarm turns off.  
To use the snooze feature:  
When the alarm sounds, press  
alarm turns off for 10 minutes and SNOOZE appears on the LCD.  
SNOOZE / DIMMER  
(SNOOZER/DIMMER). The  
Turning off the alarm  
To turn off the alarm:  
Press any button except  
SNOOZE / DIMMER  
(SNOOZER/DIMMER).  
Setting the sleep timer  
You can specify the amount of time your radio waits before it turns off  
automatically.  
To set the sleep timer:  
Press Sleep  
repeatedly to select the amount of time you want  
your radio to wait before it turns off automatically. You can select 15,  
30, 45, 60, or 90 minutes. The time you select and the SLEEP icon  
appear on the LCD.  
To turn off the sleep timer, press Sleep  
appears and the SLEEP icon disappears.  
repeatedly until 00  
Playing your radio  
Notes  
When you turn off your radio, it goes into standby mode.  
To play your radio:  
1
2
Make sure that you have connected the AC/DC power adapter. See  
“Connecting the AC/DC power adapter” on page 8.  
Press Source . Your radio turns on.  
10  
 
       
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
3
Press  
OR  
or  
to manually select a radio frequency.  
Press and hold  
or  
to automatically tune to the next lower or  
higher radio station.  
4
5
Press or to increase or decrease the volume. While you are  
adjusting the volume, the “Volume” icon lights and the current volume  
level number appears in the middle of the LCD.  
To turn off your radio, press and hold Source  
for two seconds.  
OFF appears on the LCD for three seconds, then your radio turns off.  
Programming a radio station preset  
A radio station preset lets you assign a preset number to a radio station to  
make it easier to tune to a station. You can program 10 presets.  
To program a radio station preset:  
1
Tune to the radio station you want to program, then press and hold  
Preset for two seconds. The “Preset” icon lights and the next  
available preset number (P-01 through P-10) appears in the middle of  
the LCD. When you exit programming mode, these indicators  
disappear.  
2
3
If you want to use a different preset number, press  
until the number you want appears on the LCD.  
or  
repeatedly  
Within 10 seconds, press Preset  
If you do not press Preset within 10 seconds, your radio exits  
preset mode and your station preset is not saved.  
again to save your station preset.  
Tuning to a preset radio station  
After you program radio station presets, you can quickly tune to a preset  
station.  
To tune to a preset radio station:  
Quickly press and release Preset  
“Preset” and preset number (P-01 through P-10) for the station you  
want appears on the LCD. Your radio tunes to the station.  
one or more times until the  
Adjusting the LCD brightness  
When you adjust the LCD brightness, your radio retains the setting and  
uses this setting the next time you turn on your radio.  
To adjust the LCD brightness:  
SNOOZE / DIMMER  
1
Quickly press  
(SNOOZER/DIMMER) repeatedly to select a  
brightness level. You can select High, Middle, or Low.  
11  
 
     
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
2
Wait a few seconds to save your setting and exit brightness mode.  
Playing audio from a Bluetooth device  
You can pair your radio with a Bluetooth device to play the Bluetooth  
audio through your radio’s speakers.  
To pair your radio with a Bluetooth device:  
1
2
3
Press Source  
to turn on your radio, then press Source  
repeatedly until Bluetooth appears on the LCD.  
Make sure that your Bluetooth device is turned on and within 33 feet  
(10 meters) of your radio.  
On the Bluetooth device, enter pairing mode. See the instructions that  
came with your Bluetooth device for information about how to enter  
pairing mode.  
4
On your radio, press and hold Pair/Preset  
radio enters pairing mode. Your radio remains in pairing mode for five  
minutes or until your radio pairs with the Bluetooth device.  
for six seconds. Your  
If your Bluetooth device is not turned on or is too far away from  
your radio, the icon on the LCD blinks every two seconds.  
While your radio is pairing with your Bluetooth device, the icon  
on the LCD blinks twice a second.  
When pairing is complete, the icon on the LCD lights solid.  
5
On the Bluetooth device, select NS-CLBT01-B or NS-CLBT01-W.  
See the instructions that came with your Bluetooth device for  
information about how to select a device for pairing.  
Notes  
• Your Bluetooth device must be within 33 feet  
(10 meters) of your radio.  
• If you turn off your Bluetooth device or move it too far  
from the radio, the pairing connection is lost. When you  
move the last connected device within your radio's  
range, the pairing connection is restored.  
• Your radio can store pairing information for eight  
devices.  
To play from a paired Bluetooth device:  
1
Press Source  
to turn on your radio, then press Source  
repeatedly until Bluetooth appears on the LCD.  
2
To control playback:  
Press  
or  
to increase or decrease the volume. While you are  
adjusting the volume, the “Volume” icon lights and the current  
volume level number appears in the middle of the LCD.  
Press  
or  
to go to the previous or next song.  
12  
 
 
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
Press and hold  
songs on the Bluetooth device.  
Press Pair/Preset to start or pause playback.  
or  
to fast reverse or fast forward through the  
To disconnect from a paired device:  
Press Source  
Press and hold Source  
Unplug the AC/DC power adapter.  
Turn off the Bluetooth function on the connected device.  
Move the Bluetooth device more than 33 feet (10 meters) from your  
radio.  
to change to a different audio source, such as FM.  
to turn off your radio.  
Connecting an audio device  
You can connect an audio device, such as an MP3 player, to your radio to  
play music through your radio’s speakers.  
To connect an audio device:  
1
Plug an audio cable with a 3.5 mm connector (not included) into the  
AUX IN jack on the back of your radio and into the audio out jack on  
your audio device.  
2
3
Press Source  
to turn on your radio, then press Source  
repeatedly until AUX appears on the LCD.  
Press or to increase or decrease the volume. While you are  
adjusting the volume, the “Volume” icon lights and the current volume  
level number appears in the middle of the LCD.  
4
Use the controls on the audio device to control playback.  
Charging a device’s battery  
You can use the USB port on your radio to charge a connected device’s  
battery.  
To charge a device’s battery:  
Connect a USB cable (not provided) to the USB port on your radio and  
to the USB port on the device.  
13  
 
   
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
Troubleshooting  
Problem  
Possible cause  
Possible solution  
repeatedly until  
My Bluetooth device will not pair Bluetooth is not selected as the audio Press press Source  
with my radio.  
source on your radio.  
Bluetooth appears on the LCD.  
Your radio is not in pairing mode.  
Press and hold Pair/Preset  
seconds.  
for six  
Your Bluetooth device is too far away Make sure that your Bluetooth device is within  
from your radio.  
33 feet (10 meters) of your radio.  
Your Bluetooth device is not in  
pairing mode.  
Make sure that your Bluetooth device is in  
pairing mode. See the instructions that came  
with your device.  
The battery level on your Bluetooth Charge the battery on your Bluetooth device,  
device may be too low. then try pairing again.  
Another paired Bluetooth device is Another paired Bluetooth device that is too  
too close to your raido.  
close to your radio (such as a cell phone paired  
to a headset) can interfer with pairing. Move  
the other paired device away from your radio or  
turn off the other paired device.  
Your Bluetooth device may not use a Your radio supports the A2DP and AVRCP  
supported Bluetooth protocol.  
Bluetooth protocols. Check the documentation  
that came with your device to determine if it  
uses a supported protocol.  
My radio is in pairing mode, but Your Bluetooth device may not be  
does not pair with my Bluetooth turned on.  
device.  
Make sure that your Bluetooth device is turned  
on.  
You have not selected your radio on Make sure that your Bluetooth device is in  
the Bluetooth device.  
pairing mode, then select NS-CLBT01-B or  
NS-CLBT01-W on your Bluetooth device. See  
the instructions that came your the Bluetooth  
device.  
Your Bluetooth device is too far away Make sure that your Bluetooth device is within  
from your radio.  
33 feet (10 meters) of your radio.  
Sound from my Bluetooth device The volume level is set too high.  
is distorted or broken up.  
Lower the volume on your radio or Bluetooth  
device.  
Your Bluetooth device is too far away Make sure that your Bluetooth device is within  
from your radio.  
33 feet (10 meters) of your radio.  
There may be something between  
Walls, furniture, and other objects can interfer  
your radio and Bluetooth device that with the communication between your radio  
is interfering.  
and Bluetooth device. Make sure that nothing is  
between your radio and Bluetooth device.  
14  
 
 
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
Specifications  
Total RMS power  
2.4 W (1.2 W × 2) @1kHz, @ 10% THD  
Total peak power  
Signal-to-noise ratio  
Frequency response  
Supported Bluetooth  
protocols  
4.8 W  
65dB  
300Hz - 20kHz  
A2DP  
AVRCP  
Speakers  
Batteries  
2 × 40 mm  
2 AAA  
Dimensions (W × D × H) 9.8 × 2.1 × 2.1 in. (250 × 54 × 54 mm)  
Weight  
1.1 lbs. (0.5 kg)  
15  
 
 
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
Legal notices  
FCC Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) this device may not cause harmful interference, and (2) this device must  
accept any interference received, including interference that may cause undesired  
operation.  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measure:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Warning: Changes or modifications not expressly approved by the party responsible for  
compliance could void the user's authority to operate the equipment.  
RSS-Gen & RSS-210 Statement  
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is  
subject to the following two conditions: (1) this device may not cause interference, and (2)  
this device must accept any interference, including interference that may cause undesired  
operation of the device.  
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio  
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil  
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout  
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le  
fonctionnement."  
"This equipment complies with Industry Canada radiation exposure limits set forth for an  
uncontrolled environment. Cet équipement est conforme à l'exposition aux rayonnements  
Industry Canada limites établies pour un environnement non contrôlé."  
CAN ICES-3 (B)/NMB-3(B)  
16  
 
 
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
90-day limited warranty - Insignia  
Definitions:  
Insignia Products (“Insignia”) warrants to you, the original purchaser of this new  
Insignia-branded product (“Product”), that the Product shall be free of defects in the original  
manufacturer of the material or workmanship for a period of ninety (90) days from the date  
of your purchase of the Product (“Warranty Period”). For this warranty to apply, your Product  
must be purchased in the United States or Canada from a Best Buy or Future Shop  
authorized dealer of Insignia brand products only that are packaged with this warranty  
statement.  
How long does the coverage last?  
The Warranty Period lasts for ninety (90) days from the date you purchased the Product. Your  
purchase date is printed on the receipt you received with the Product.  
What does this warranty cover?  
During the Warranty Period, if the original manufacture of the material or workmanship of  
the Product is determined to be defective by an authorized Insignia repair center or store  
personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or  
(2) replace the Product at no charge with new or rebuilt comparable products or parts.  
Products and parts replaced under this warranty become the property of Insignia and are  
not returned to you. If service of Products or parts are required after the Warranty Period  
expires, you must pay all labor and parts charges. This warranty lasts as long as you own your  
Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or  
otherwise transfer the Product.  
How to obtain warranty service?  
If you purchased the Product at a Best Buy or Future Shop retail store location, please take  
your original receipt and the Product to any Best Buy or Future Shop store. Make sure that  
you place the Product in its original packaging or packaging that provides the same amount  
of protection as the original packaging. If you purchased the Product from a Best Buy or  
Future Shop online web site, mail your original receipt and the Product to the address listed  
on the web site. Make sure that you put the Product in its original packaging or packaging  
that provides the same amount of protection as the original packaging.  
To obtain warranty service, in the United States call 1-888-BESTBUY, Canada call  
1-866-BESTBUY for Future Shop call 1-800-663-2275. Call agents may diagnose and correct  
the issue over the phone.  
Where is the warranty valid?  
This warranty is valid only in the United States and Canada at Best Buy or Future Shop  
branded retail stores or websites to the original purchaser of the product in the county  
where the original purchase was made.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction/education  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as power surges  
Accident(s)  
Misuse  
17  
 
 
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
Abuse  
Negligence  
Commercial purposes/use, including but not limited to use in a place of business or in  
communal areas of a multiple dwelling condominium or apartment complex, or  
otherwise used in a place of other than a private home.  
Modification of any part of the Product, including the antenna  
Display panel damaged by static (non-moving) images applied for lengthy periods  
(burn-in).  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage or power supply  
Attempted repair by any person not authorized by Insignia to service the Product  
Products sold “as is” or “with all faults”  
Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)  
Products where the factory applied serial number has been altered or removed  
Loss or Theft of this product or any part of the product  
Up to three (3) pixel failures (dots that are dark or incorrectly illuminated) grouped in an  
area smaller than one tenth (1/10) of the display size or up to five (5) pixel failures  
throughout the display. (Pixel based displays may contain a limited number of pixels  
that may not function normally.)  
Failures or Damage caused by any contact including but not limited to liquids, gels or  
pastes.  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY  
FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR  
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON  
THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR  
PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER  
EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED  
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED  
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND  
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY  
PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON  
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO  
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER  
RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.  
Contact Insignia:  
For customer service please call 1-877-467-4289  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645  
© 2013 BBY Solutions, Inc.  
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some  
countries. All other products and brand names are trademarks of their respective owners.  
18  
 
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth  
19  
 
INSIGNIA is a registered trademark of BBY Solutions, Inc.  
Registered in some countries.  
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.  
©2013 BBY Solutions, Inc.  
All Rights Reserved  
1-877-467-4289  
V2 ENGLISH  
13-0221  
 

Indesit Cooktop KD3G21SL IR User Manual
JBL Speaker PC 600 User Manual
JVC TV Receiver TU HD500A User Manual
JVC VCR HR E939EG User Manual
Kambrook Slow Cooker KSC320 User Manual
Knoll Systems Projector HDP2300 User Manual
Kodak Digital Camera MD1063 User Manual
Kompernass Sewing Machine E 2073 User Manual
Konica Minolta Digital Camera llo Zoom User Manual
Krell Industries Car Amplifier KAV 300IL User Manual