JVC DVD Player XV N420B User Manual

CAUTION  
Notes on installation  
Connections  
Before making connections:  
• Do not connect the AC power cord until all other connections have been made.  
• Connect VIDEO OUT of the player directly to the video input of your TV. Connecting VIDEO OUT of the  
player to a TV via a VCR/an integrated TV/Video system may cause a monitor problem.  
DVD PLAYER  
XV-N420B  
XV-N422S  
Warnings, Cautions and Others  
To reduce the risk of electrical shocks, fire, etc.:  
1. Do not remove screws, covers or cabinet.  
2. Do not expose this appliance to rain or moisture.  
Caution ––  
Disconnect the mains plug to shut the power off  
completely. The STANDBY/ON button in any  
position does not disconnect the mains line. The power  
can be remote controlled.  
CAUTION  
THIS PRODUCT USES A LASER SYSTEM.  
USE OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER THAN THOSE  
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS  
RADIATION EXPOSURE.  
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.  
REFER SERVICING TO QUALIFIED PERSONNEL  
• Select a place which is level, dry and neither too hot  
nor too cold between 5˚C and 35˚C (41˚F and 95˚F).  
• Leave sufficient distance between the player and the TV.  
• Do not install the player in a place subject to vibrations.  
• Do not put heavy objects on the player.  
To prevent malfunction of the player  
• There are no user-serviceable parts inside. If anything goes  
wrong, unplug the power cord and consult your dealer.  
• Do not insert any metallic objects, such as wires,  
hairpins, coins, etc. into the player.  
• Do not block the vents. Blocking the vents may  
damage the player.  
To clean the cabinet  
• Use a soft cloth. Follow the relevant instructions on  
the use of chemically-coated cloths.  
Connecting to a stereo audio amplifier (receiver)  
EX. 1  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
To AV COMPU LINK (II, EX, or III)  
PB  
Y
STANDBY/ON button!  
RIGHT  
CAUTION:  
TO REDUCE THE RISK OF ELECTRIC SHOCK.  
DO NOT REMOVE COVER (OR BACK)  
LEFT  
IDEO  
VIDEO  
VIDEO OUT  
PR  
TV  
AUDIO OUT  
INSTRUCTIONS  
Basic Connection  
The player  
NO USER SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
To analog audio input  
®
S-video cable*  
(not supplied)  
TV  
NOTES  
• Set the player’s AV COMPU LINK setting as follows:  
– When connecting to the VIDEO-1 input terminal of  
the television: DVD2  
– When connecting to the VIDEO-2 input terminal of  
the television: DVD3  
Connecting to a digital audio device  
The lightning flash with arrowhead  
symbol, within an equilateral triangle is  
intended to alert the user to the presence  
of uninsulated “dangerous voltage” within  
the products enclosure that may be of  
sufficient magnitude to constitute a risk of  
electric shock to persons.  
The exclamation point within an equilateral  
triangle is intended to alert the user to the  
presence of important operating and  
maintenance (servicing) instructions in the  
literature accompanying the appliance.  
V I D E O  
• If your TV has a monaural audio input  
instead of stereo, use an optional audio  
cable which converts stereo audio output to  
monaural.  
I
N
To enjoy high-quality surround sound, connect the  
DIGITAL OUT (COAXIAL) jack to a Dolby Digital or DTS  
decoder or an amplifier with a built-in decoder.  
S-VIDEO  
VIDEO  
PB  
• If your TV is a HDTV or HD-ready TV, you can  
connect with component (Y, PB, PR) jacks. By  
connecting with component (Y, PB, PR) jacks,  
you can select the progressive scanning  
mode which provides the best picture quality.  
* The S-VIDEO jack and the component (Y,  
PB, PR) jacks cannot be used at the same  
time.  
GNT0060-001A[US]  
0105MOC-MW-SC  
©2005 Victor Company of Japan, Limited  
Y
COAXIAL  
L
E
F
T
EX. 2  
PCM/STREAM  
RIGHT  
AU  
EN  
DIO  
DIGITAL OUT  
To AV COMPU LINK  
(II, EX, or III)  
To AV  
COMPU LINK  
RI  
G
H
T
LEFT  
S-EO  
VIDEO  
VIDEO OUT  
PR  
• Do not use benzene, thinner or other organic solvents and  
disinfectants. These may cause deformation or discoloring.  
AUDIOOUT  
.
To analog  
Region code of DVD VIDEO  
This player can play back DVD VIDEO discs whose  
region code numbers include “1.”  
CLASS 1 LASER PRODUCT  
REPRODUCTION OF LABELS  
WARNING LABEL INSIDE OF THE UNIT  
audio input  
TV  
Playable discs  
• DVD VIDEO, Audio CD, Video CD, SVCD  
P
C
COAXIA  
M
Examples of playable DVD VIDEO discs:  
The player  
/
S
TREAM  
L
The player  
VCR  
DIGITA  
PR  
L
OUT  
To digital audio input  
When using the S-VIDEO jack, do not  
connect the component (Y, PB, PR) jacks  
with the player.  
1 2  
3 4  
1 2 3  
4 5 6  
WARNING: TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, DO NOT EXPOSE THIS  
APPLIANCE TO RAIN OR MOISTURE.  
Yellow  
• Set the VCR’s Remote Control Code and the player’s  
AV COMPU LINK setting as follows:  
– When connecting to the VIDEO-1 input terminal of  
the television:  
The player’s AV COMPU LINK setting: DVD2  
VCR’s Remote Control Code: B  
– When connecting to the VIDEO-2 input terminal of  
the television:  
ALL  
S-  
VIDEO  
1 5  
1
RI  
GH  
VID
VIDEO UT  
T
NOTES  
PB  
V I D E O  
Audio/video  
cable*  
(supplied)  
L
EF  
T
The player’s region code is printed on the rear of the player  
Note of Color system format  
This player accommodates the NTSC system, and also  
can play back discs recorded with PAL system. (PAL video  
signals are converted to an NTSC signal and output.)  
• Depending on the disc, no signal may be outputted  
from the DIGITAL OUT. Make an analog connection  
in this case.  
AUDIO OUT  
• DVD-R/-RW written in the DVD VIDEO format  
• CD-R/RW written in the SVCD, Video CD or Audio CD  
format  
• CD-R/RW written in MP3/WMA/JPEG in accordance  
with the “ISO 9660” format  
CAUTION:  
AV  
CO  
For U.S.A.  
MP  
U
LI  
NK  
• Do not block the ventilation openings or holes. (If the  
ventilation openings or holes are blocked by a newspaper  
or cloth, etc., the heat may not be able to get out.)  
• Do not place any naked flame sources, such as  
lighted candles, on the apparatus.  
• When discarding batteries, environmental problems  
must be considered and local rules or laws governing  
the disposal of these batteries must be followed strictly.  
• Do not expose this apparatus to rain, moisture, dripping  
or splashing and that no objects filled with liquids, such  
as vases, shall be placed on the apparatus.  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to  
part 15 of the FCC Rules.  
White  
• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO]  
preference display correctly according to the  
connected digital audio equipment. (See “DIGITAL  
AUDIO OUTPUT” in “Initial settings.”)  
Red  
These limits are designed to provide reasonable  
protection against harmful interference in a residential  
installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may  
cause harmful interference to radio communications.  
However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment  
does cause harmful interference to radio or television  
reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver. Connect the equipment into an outlet on a  
circuit different from that to which the receiver is  
connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
Supported Digital audio formats:  
Linear PCM, Dolby Digital, DTS (Digital Theater Systems)*  
NOTES  
Supplied accessories  
The player’s AV COMPU LINK setting: DVD3  
VCR’s Remote Control Code: A  
Connecting to a TV with component jacks  
About the scanning mode indicator  
If anything is missing, consult your dealer immediately.  
• Audio/video cable (Yellow/White/Red) (x 1)  
• Remote control (x 1)  
[PICTURE SOURCE] of  
the PICTURE menu  
AUTO  
FILM  
VIDEO(NORMAL)/  
(ACTIVE)  
Source type of DVD VIDEO  
Film source  
[DDP]  
Video source  
[P]  
EX. 3  
Using the AV COMPU LINK system  
The JVC COMPU LINK system allows you to enjoy  
video and/or audio by simply pressing Play on the  
source component (the component which plays back  
the video or audio, such as a DVD player or VCR). You  
do not even have to switch on power on the TV or  
receiver.  
• If a disc gets dirty, scratched or warped, or due to the  
disc characteristics or recording conditions, the  
player may not be able to play back such discs.  
• The player can play back audio signals recorded in  
MIX-MODE CD, CD-G, CD-EXTRA and CD TEXT.  
• With some discs, operations may not be possible.  
* To play back DTS-encoded DVD VIDEO or DTS-  
encoded Audio CD discs correctly, connect the  
player to an amplifier with a built-in DTS decoder.  
Otherwise, playback sound will be distorted.  
To AV COMPU LINK  
(II, EX, or III)  
To AV  
COMPU LINK  
PB  
• R6(SUM-3)/AA(15F) battery (x 2)  
[DDP]  
[DDP]  
Y
COAXIAL  
/STREAM  
RIGHT  
TV  
• Manufactured under license from Dolby  
Laboratories. “Dolby” and the double-D symbol are  
trademarks of Dolby Laboratories.  
• “DTS” and “DTS Digital Out” are trademarks of  
Digital Theater Systems, Inc.  
• This product incorporates copyright protection  
technology that is protected by U.S. patents and  
other intellectual property rights. Use of this  
copyright protection technology must be authorized  
by Macrovision, and is intended for home and other  
limited viewing uses only unless otherwise  
authorized by Macrovision. Reverse engineering or  
disassembly is prohibited.  
[P]  
[P]  
TAL OUT  
LEFT  
S-VIDEO  
VIDEO  
VIDEO OUT  
PR  
AUDIO OUT  
Precautions  
NOTE  
To component video input  
Receiver  
The player  
Notes on the power cord  
Some progressive TV and High-Definition TV sets are  
not fully compatible with the player. To check the  
compatibility of your TV, contact your local JVC  
customer service center.  
• When you are away on travel or otherwise for an extended  
period of time, remove the plug from the wall outlet. A  
small amount of power (1.0 W) is always consumed while  
the power cord is connected to the wall outlet.  
• When unplugging the player from the wall outlet,  
always pull the plug, not the power cord.  
• Do not handle the power cord with wet hands!  
• Disconnect the power cord before cleaning the  
player or moving the player.  
• Do not alter, twist or pull the power cord, or put  
anything heavy on it, which may cause fire, electric  
shock, or other accidents.  
• If the cord is damaged, consult a dealer and have the  
power cord replaced with a new one.  
Avoid moisture, water, dust, and high temperatures  
• Do not place the player in moist or dusty places.  
• If water gets inside the player, turn off the power and  
remove the plug from the wall outlet, then consult  
your dealer. Using the player in this state may cause  
a fire or electrical shock.  
To switch the scanning mode between Progressive and  
Interlace, press and hold VFP-I/P on the remote control  
for a few seconds.  
• Set the player’s AV COMPU LINK setting to DVD1.  
Connection and setup  
Notes for connection  
Using an AV COMPU LINK cable, connect the AV  
COMPU LINK terminals of each component to one  
another.  
• The player’s AV COMPU LINK setting is controlled  
using the OTHERS menu in the preference display.  
See “AV COMPULINK MODE” in “Initial settings.”  
• See also the instruction manual of the other device.  
• If you connect the player to a receiver via AV COMPU  
LINK in a system including a Dolby Digital decoder,  
some functions may not be performed automatically.  
• Connect the AUDIO OUT jacks of the player to the  
audio input jacks of a receiver indicating “DVD.”  
Otherwise, the system will not work correctly.  
NOTES  
Unplayable discs  
• Connect “Y” to “Y,”“PB” to “PB(CB),”“PR” to “PR(CR)”  
correctly.  
If you try to play back discs listed below, noise may be  
generated and causes damage to speakers.  
• DVD-RW written in the VR format  
• DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM,  
PHOTO CD, SACD  
• When using component (Y, PB, PR) jacks, do not  
connect S-VIDEO jack with the player.  
For customer use  
Operation  
Enter below the Model No. and Serial No. which are  
located either on the rear, bottom or side of the cabinet.  
Retain this information for future reference.  
Model No.  
• Unfinalized discs  
For Canada  
1. Turn on the main power of the television.  
2. Insert a disc (or tape) into the source component.  
3. Press 3 of the source component.  
The following actions are performed automatically:  
• Turning on the television and/or receiver.  
• Setting the source of the television to the external  
input (VIDEO-1 or VIDEO-2).  
• Discs of irregular shape or discs with tape, seals or  
paste on either the label side or playback side.  
Playing back these discs may damage the player.  
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH  
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY  
INSERT  
Serial No.:  
For Canada  
The Non-DVD side of a “DualDisc” does not comply with  
the “Compact Disc Digital Audio” standard.  
Therefore, the use of Non-DVD side of a DualDisc on  
this product may not be recommended.  
THIS DIGITAL APPARATUS DOES NOT EXCEED THE  
CLASS B LIMITS FOR RADIO NOISE EMISSIONS  
FORM DIGITAL APPARATUS AS SET OUT IN THE  
INTERFERENCE-CAUSINGEQUIPMENTSTANDARD  
ENTITLED “DIGITAL APPARATUS,” ICES-003 OF  
THE DEPARTMENT OF COMMUNICATIONS.  
• Setting the source of the receiver to the component  
which has started playback.  
• Do not expose the player to direct sunlight or place it  
near a heating device.  
1
2
3
4
Turning on the power  
Initial setup  
Basic Operations  
Advanced Operations  
When you turn on the player for the first time after  
purchase, the following message appears on the TV  
screen.  
Turning on and off the player  
Open/close the disc tray  
Changing the display window  
contents  
Changing the language, sound  
Changing the picture tone (VFP)  
Inserting the AC power plug  
and scene angle  
After all other connections have been made, insert the  
AC power plug to the wall outlet firmly.  
Insert a disc  
The VFP (Video Fine Processor)  
function allows you to adjust the  
picture character according to the  
type of programming, picture tone or  
personal preferences.  
STANDBY/ON  
OPEN/  
Each time you press DISPLAY,  
the display window contents  
changes.  
CLOSE  
1 Press the button.  
STANDBY/ON  
EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO  
SETTING  
YES - PRESS ENTER NO - PRESS CANCEL  
OPEN/  
CLOSE  
1 Press 0 to open the disc tray.  
2 Press the button repeatedly or  
+
SLOW  
DISPLAY ON SCREEN  
2 Place a disc in the disc tray.  
• To insert an 8-cm disc, place it in the inner  
recess.  
3 Press 0 to close the disc tray.  
Turning on and off the player  
Installing the batteries in the remote control  
Open the compartment cover, and place the two  
supplied R6(SUM-3)/AA(15F) batteries in the remote  
control according to the polarity markings (“+” and “–”)  
inside the compartment. Then replace the cover.  
5/to select the desired item.  
3 Press ENTER to finish the  
setting.  
Basic playback  
+
SLOW  
DISPLAY ON SCREEN  
TOP  
MENU  
THUMBNAIL/  
LIST  
Before enjoying this player, make the initial settings as  
follows:  
Buttons To do  
TOP  
MENU  
THUMBNAIL/  
LIST  
Locating the beginning of a scene  
or song  
1 Press VFP-I/P.  
3* Start/resume normal Playback  
2 Press 2/3 to select the desired  
Buttons  
To do  
ENTER  
1 Press ENTER.  
preset.  
You can select a title/chapter/  
track directly and start playback.  
For DVD Video:  
(While stopped) select title.  
(While playing back) select  
chapter.  
ENTER  
7
Stop  
AUDIO  
For DVD Video:  
select audio languages.  
For SVCD/VCD:  
select the audio  
channel.  
MENU  
SET UP  
NEXT  
• When RESUME MODE is ON or  
DISC RESUME, this player  
memorizes the position on the  
disc where you interrupted  
playback.  
DVD PLAYER SETUP  
Selected  
Preset  
USER 1  
PREVIOUS SELECT  
MENU  
SET UP  
NEXT  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
OFF  
GAMMA  
MID  
PREVIOUS SELECT  
CLEAR  
BRIGHTNESS  
CONTRAST  
+
4
CLEAR  
+10  
ON SCREEN LANGUAGE  
ENGLISH  
ENGLISH  
SUBTITLE select the subtitle.  
ANGLE select the view-angle.  
1
4
2
5
8
0
3
6
SATURATION +10  
For SVCD/VCD/CD:  
Select track.  
– To resume playback, press 3.  
– To stop playback completely,  
press 7 again.  
FRENCH  
SPANISH  
TINT  
+10  
1
4
2
5
8
0
3
6
SHARPNESS  
Y DELAY  
LOW  
To select 5: press 5.  
2 Press 5/to select the on-screen language for  
7
9
+
2
To select 23: press 2, then 3.  
To select 40: press 4, then 0.  
• If you press TITLE/GROUP  
before entering the number, you  
can select the title instead of the  
chapter.  
8*  
Pause  
the preference displays, etc., then press ENTER.  
CANCEL  
RETURN  
Changing the Sound Field  
7
9
• Each time you press  
8
on the  
Parameter  
CANCEL  
RETURN  
DVD PLAYER SETUP  
remote control, the still picture  
advances to the next frame.  
Each time you press SOUND  
EFFECT, the Sound Effect mode  
changes.  
• As the value becomes bigger, the  
Sound Effect works stronger.  
TITLE/  
GROUP  
SOUND  
EFFECT  
NORMAL For watching TV in a  
VFP DIMMER  
I/P  
MONITOR TYPE  
PICTURE SOURCE  
SCREEN SAVER  
BACKGROUND  
4:3 L.B.  
16:9  
4:3 LB  
general room.  
TITLE/  
GROUP  
SOUND  
EFFECT  
VFP DIMMER  
I/P  
ANGLE SUBTITLE AUDIO ZOOM  
SLIDE EFFECT  
4:3 PS  
¡/1 Fast forward/backward  
(While paused)  
CINEMA For watching a movie  
software in a room with  
suppressed light.  
STANDARD  
ANGLE SUBTITLE AUDIO ZOOM  
SLIDE EFFECT  
Slow-motion playback  
The batteries will last about six months with normal use.  
If the functions of the remote control become erratic,  
replace the batteries.  
Using the disc menu  
• Each time you press the button,  
With the label side up  
USER1  
USER2  
You can adjust  
the playback speed changes.  
You can operate a disc—SVCD/  
VCD with Playback Control*  
(PBC)—using the disc menu  
shown on the TV screen.  
* A method of controlling disc play  
for SVCD/VCD by using the disc  
menu.  
parameters that affect the  
picture character and  
store the settings as a user  
preset. See below.  
3 Press 5/to select the monitor type, then press  
ENTER.  
¢/4 Skip chapter/track  
• If you press and hold the button  
during playback, playback is  
advanced/reversed at 5 times  
normal speed.  
Precautions of the safe use of batteries  
Observe the following precautions for the safe use of  
batteries. If they are used improperly their lives will be  
shortened, they may burst or their contents may leak.  
• Remove the batteries from the remote control if it is  
not going to be used for a long period of time.  
• Remove dead batteries and dispose of them  
properly.  
• Never leave dead batteries lying around, take them  
apart, mix them with other refuse, or throw them into  
an incinerator.  
• Never touch liquid that has leaked out of a battery.  
• Do not mix new and old batteries, or batteries of  
different types, when placing them.  
• For a normal (conventional) TV, select “4:3 LB” or  
“4:3 PS.(See “MONITOR TYPE” in “Initial  
settings.”)  
Zooming the picture  
Each time you press ZOOM, the  
magnification changes.  
To adjust the picture tone  
Point toward the remote sensor directly as possible  
(the operating range is approx. 5 m.)  
• For a wide-screen TV, select “16:9.”  
1 Select “USER1” or “USER2.”  
2 Press 5/to select a parameter, then press ENTER.  
VARI-PLAY (For DVD Video)  
• You can use 5//2/3 button to  
DVD PLAYER SETUP  
7 For DVD  
(variable The disc is played back at about  
playback) 1.2 or 1.5 times (FAST)/0.8 or 0.6  
times (SLOW) normal speed.  
The sound is not muted, and the  
subtitle does not go off (except for  
DTS).  
move the zoomed position.  
DIGITAL AUDIO OUTPUT  
DOLBY DIGITAL/PCM  
PCM ONLY  
1 Press TOP MENU or MENU to show the disc menu.  
2 Press 5//2/3 to select a desired item, then press  
To return to the normal playback,  
select the normal size by pressing  
ZOOM repeatedly.  
ANALOG DOWNMIX  
D.RANGE CONTROL  
OUTPUT LEVEL  
About On-screen guide icons  
GAMMA  
Adjust this if the neutral color is bright or dark.  
The brightness of dark and bright portion is  
maintained (LOW/MID/HIGH).  
DOLBY DIGITAL/PCM  
STREAM/PCM  
: Playback.  
ENTER or 3 (SELECT).  
STANDARD  
• With some discs, you can also select items by entering the  
number using the numeric buttons.  
: Pause.  
BRIGHTNESS Adjust this if the picture is bright or dark on the  
whole (–16 (darkest) to +16 (brightest)).  
/
: Slow-motion playback with the current  
speed.  
Main display  
7 For SVCD/VCD  
(For SVCD/VCD)  
4 Press 5/to select a desired digital output  
signal type, then press ENTER.  
The disc is played back at about 2  
times (FAST)/0.5 times (SLOW)  
normal speed.  
• Each indicator lights up when corresponding  
function/mode is activated, or corresponding  
information is on the main display.  
1 While stopped, press TOP MENU or 3 (SELECT) to  
CONTRAST  
Adjust this if the far and near position is unnatural  
(–12 to +12).  
show the menu.  
/
: Fast forward/backward playback with the  
current speed.  
Set this item correctly according to the logo on your  
receiver or decoder.  
(If you do not connect the player to such a device,  
press ENTER to finish the setting.)  
• Receiver/decoder bearing Dolby Digital logo and  
no DTS, select “DOLBY DIGITAL/PCM.”  
• Receiver/decoder bearing both Dolby Digital and  
DTS logos, select “STREAM/PCM.”  
• Receiver/decoder bearing neither Dolby Digital nor  
DTS logo, or digital recorder, select “PCM ONLY.”  
2 Press the numeric buttons to select a desired item.  
To select 5: press 5.  
Turning on and off the player  
SATURATION Adjust this if the picture is whitish or blackish  
(Only for DVD Video)  
Press  
STANDBY/ON.  
(–16 (blackest) to +16 (whitest)).  
To select 23: press 2, then 3.  
To select 40: press 4, then 0.  
: At the beginning of a scene containing multi-  
angle views.  
The playback position moves back  
10 seconds before the current  
position (only within the same title).  
TINT  
Adjust this if the appearance of flesh tone is  
unnatural (–16 to +16).  
• To move to the next or previous page of the current menu,  
press ¢ or 4.  
: At the beginning of a scene containing multi-  
audio sounds.  
*
38 on the player starts/pauses playback.  
SHARPNESS Adjust this if the picture is indistinct (LOW/HIGH).  
• To return to the previous menu, press RETURN.  
: At the beginning of a scene containing multi-  
subtitles.  
You can change the setting so that the on-screen  
guide icons do not appear on the TV screen. (See  
“ON SCREEN GUIDE” in “Initial settings.”)  
To play back without PBC  
Y DELAY  
Adjust this if the picture looks separately/  
overlapped (–2 to +2).  
While stopped, press the numeric buttons instead of 3  
(SELECT) to start playback.  
To reactivate PBC  
Changing the display brightness  
3 Press 5/to adjust the parameter, then press ENTER.  
4 Repeat step 2 and 3 to adjust other parameters.  
5 Press VFP-I/P to finish the setting.  
To bring up the DVD PLAYER SETUP display later  
Press SET UP for a few seconds until the DVD PLAYER  
SETUP display appears.  
Press DIMMER to change the brightness of  
the display window.  
• Press TOP MENU or MENU.  
• Press 7 to stop playback, then 3 (SELECT).  
5
6
7
8
 

Indesit Refrigerator IN S 1610 UK User Manual
Insignia Speaker NS S6501 User Manual
Invacare Mobility Aid PH904A User Manual
JVC Car Stereo System LVT0224 001B User Manual
Kalorik Waffle Iron USK WM 30821 User Manual
Kenwood GPS Receiver KNA DV2200 User Manual
King Canada Log Splitter KC 5LS User Manual
King Canada Saw KC 712GH 5 User Manual
Koblenz Thorne Electric Vacuum Cleaner U 40 User Manual
Konica Minolta Printer magicolor 2430 DL User Manual