Klipsch Speaker IC SW 8 T 2 User Manual

I C - S W - 8 T 2 I N - C E I L I N G S U B W O O F E R  
Download from Www.Somanuals.com. All Manuals SearchOAnWd DNowEnlRoad.S M A N U A L A N D W A R R A N T Y  
5. Insert the speaker into the cutout hole. With a #2 Phillips screw-  
driver, tighten the four dog clamps until they are seated securely  
against the ceiling surface. Do not overtighten.  
6. For installations using 70v/100v input connection, set the  
switch on the front panel to "70V/100V".  
For low impedance, stereo applications, the switch should be  
set to 8 ohms stereo.  
For low impedance, mono applications, the switch should be  
set to 4 ohm mono.  
In all cases, please make sure the speaker wires are connect-  
ed to the appropriate terminal on the back.  
60W  
30W  
60W  
120W  
IC-SW-8T2 tap selectable  
7. Using the flat of your hand, insert grille into speaker frame  
making sure it is securely seated and flush.  
Seismic Tab  
A seismic tab, located on the back of the speaker, is used  
as a secondary security point. Some construction codes may  
require its use. To utilize the seismic tab, run a support wire  
from a secure point in the ceiling and attach it to the tab.  
Be sure to consult the construction codes in your area.  
Klipsch recommends the use of this tab in all installations as  
a secondary means of support.  
 
I
N - C  
E
I
L
I
N
G
S
U
B
W
O
O
F
E
R
I C - S W - 8 T 2 SPECIFICATIONS  
IC-SW-8T2  
FREQUENCY RESPONSE  
CONT. POWER HAND.  
CALC MAX CONT. OUTPUT @ 1M  
SENSITIVIT Y 2.83 V/1M  
COVERAGE  
50-130 Hz +/- 4 dB  
150 watts (27 V)  
111 dB  
92 dB  
N/A  
DI  
N/A  
Q
N/A  
NOMINAL IMPEDANCE  
DIAMETER  
6 ohms, min 4.9 ohms, switch set to mono or stereo position  
14.125"  
CUTOUT DIAMETER  
OVERALL DEPTH  
MOUNTING DEPTH  
WEIGHT  
14.25"  
13.625"  
13.313"  
23 lbs.  
INPUT CONNECTORS  
TRANSFORMER TAPS  
FINISHES  
Terminal Strip  
70V: 60W, 30W  
White  
100V: 120W, 60W  
TRANSDUCERS  
8" Woofer AND 8' Drone  
Bandpass via an 8" Drone  
ENCLOSURE TUNING  
©2003 Klipsch Audio Technologies All Rights Reserved  
Specifications Subject to Engineering Changes  
 
Klipsch Limited Warranty  
KLIPSCH, AUDIO TECHNOLOGIES ("KLIPSCH")  
warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of five (5)  
years from the date of purchase. During the Warranty period, KLIPSCH will repair or replace (at KLIPSCH’s option) this product or any  
defective parts (excluding electronics and amplifiers). For products that have electronics or amplifiers, the Warranty on those parts is for a  
period of two (2) years from the date of purchase.  
To obtain Warranty service, please contact the KLIPSCH authorized dealer from which you purchased this product. If your dealer is not  
equipped to perform the repair of your KLIPSCH product, it can be returned, freight paid, to KLIPSCH for repair. Please call KLIPSCH at  
1-800-KLIPSCH for instructions. You will need to ship this product in either its original packaging or packaging affording an equal degree  
of protection.  
Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the Warranty period, must  
be presented or included to obtain Warranty service.  
This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from this product or (b) this product was not  
purchased from a KLIPSCH authorized dealer. You may call 1-800-KLIPSCH to confirm that you have an unaltered serial number and/or you  
purchased from a KLIPSCH authorized dealer.  
This Warranty does not cover cosmetic damage or damage due to misuse, abuse, negligence, acts of God, accident, commercial use or  
modification of, or to any part of, the product. This Warranty does not cover damage due to improper operation, maintenance or installa-  
tion, or attempted repair by anyone other than KLIPSCH or a KLIPSCH dealer which is authorized to do KLIPSCH warranty work. Any unau-  
thorized repairs will void this Warranty. This Warranty does not cover product sold AS IS or WITH ALL FAULTS.  
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER. KLIPSCH SHALL NOT BE  
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.  
EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES  
WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.  
Some states do not allow the exclusion or limitation of incidental or consequential damages or implied warranties so the above exclusions  
may not apply to you. This Warranty gives you specific legal rights, and you may have other rights, which vary from state to state.  
 
3502 Woodview Trace, Suite 200  
Indianapolis, Indiana 46268 USA  
.
.
1 800 KLIPSCH  
193152  
1003  
 

Indesit Convection Oven BIM 51 KA IX GB User Manual
Indesit Cooktop KD3G21SL IR User Manual
Ingersoll Rand Marine Instruments 62131 User Manual
Invacare Wheelchair 9000 Wheelchairs User Manual
John Lewis Microwave Oven JLBIOS607 User Manual
Karcher Pressure Washer K 2350 User Manual
Karcher Pressure Washer K 8000 G User Manual
Kenwood Computer Drive KVT 526DVD User Manual
KitchenAid Refrigerator 2209478 User Manual
Korg Electronic Keyboard Triton Studio User Manual