Nokia Cell Phone 2652 User Manual

User Guide for Nokia 2652 phone

9243402

Issue 1

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and

improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special,

incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of

any kind, either express or implied, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or

contents of this document. Nokia reserves the right to revise this document or withdraw it at any time

without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to

you.

This device may contain commodities, technology, or software subject to export laws and regulations

from the US and other countries. Diversion contrary to law is prohibited.

9243402 / Issue 1

Contents

FOR YOUR SAFETY ............................................................................................... 9

General information.......................................................................................... 14

Sticker in the sales package.................................................................................................................. 14

Access codes .............................................................................................................................................. 14

Light alerts.................................................................................................................................................. 15

Downloading content and applications............................................................................................. 15

GPRS............................................................................................................................................................. 16

Nokia support and contact information ............................................................................................ 16

1. Getting started .............................................................................................. 18

Keys .............................................................................................................................................................. 18

Inserting a SIM card ................................................................................................................................ 19

Inserting a battery.................................................................................................................................... 21

Putting on the wrist strap...................................................................................................................... 21

Opening the fold....................................................................................................................................... 22

Switching the phone on and off .......................................................................................................... 22

2. Basic functions .............................................................................................. 23

Making a call ............................................................................................................................................. 23

Answering or rejecting an incoming call........................................................................................... 25

Keypad lock (Keyguard) .......................................................................................................................... 26

3. Writing text................................................................................................... 27

4. Using the menu ............................................................................................. 29

Accessing a menu function ................................................................................................................... 29

List of menu functions............................................................................................................................ 31

5. Menu functions............................................................................................. 35

Messages (Menu 1).................................................................................................................................. 35

Text and picture messages (SMS)..................................................................................................... 35

Writing and sending a text or picture message ....................................................................... 36

Writing and sending an e-mail message.................................................................................... 37

Reading and replying to a text, picture or e-mail message.................................................. 38

Distribution lists................................................................................................................................. 39

Folders for text and picture messages......................................................................................... 40

Multimedia messages (MMS)............................................................................................................ 40

Writing and sending a multimedia message ............................................................................. 41

Reading and replying to a multimedia message ...................................................................... 44

Deleting messages ................................................................................................................................ 45

Voice messages...................................................................................................................................... 45

Info messages......................................................................................................................................... 45

Message settings................................................................................................................................... 46

Settings for text and e-mail messages........................................................................................ 46

Settings for multimedia messages ............................................................................................... 47

Font size setting................................................................................................................................. 48

Service commands................................................................................................................................ 48

Call register (Menu 2) ............................................................................................................................. 49

Missed, received and dialled calls.................................................................................................... 49

Call counters and call timers............................................................................................................. 50

Contacts (Menu 3) ................................................................................................................................... 50

Alternative ways to access the functions in this menu............................................................. 50

Selecting the settings for contacts.................................................................................................. 51

Saving names and phone numbers.................................................................................................. 51

Adding an image to a saved name or number.............................................................................. 53

Searching for a name in the contacts............................................................................................. 53

Deleting contacts.................................................................................................................................. 54

Editing a name, number or text item.............................................................................................. 54

Copying contacts................................................................................................................................... 54

Other functions related to the contacts list.................................................................................. 55

Speed dials........................................................................................................................................... 55

Business cards .................................................................................................................................... 56

Settings (Menu 4)..................................................................................................................................... 56

Profiles ..................................................................................................................................................... 57

Tone settings .......................................................................................................................................... 58

Adding new tones to your phone.................................................................................................. 59

Display settings...................................................................................................................................... 59

Time and date settings........................................................................................................................ 61

Personal shortcuts ................................................................................................................................ 61

Connectivity............................................................................................................................................ 62

GPRS connection ............................................................................................................................... 62

Call settings............................................................................................................................................ 63

Phone settings ....................................................................................................................................... 65

Enhancement settings......................................................................................................................... 66

Enhancement indicators in standby mode................................................................................. 67

Security settings.................................................................................................................................... 67

Restore factory settings...................................................................................................................... 68

Gallery (Menu 5)....................................................................................................................................... 68

Options for the files in the gallery................................................................................................... 70

Organiser (Menu 6).................................................................................................................................. 71

Alarm clock............................................................................................................................................. 71

When the alarm time expires......................................................................................................... 72

Calendar................................................................................................................................................... 72

Using the different calendar views .............................................................................................. 72

Making a calendar note................................................................................................................... 73

When the phone sounds an alarm for a note............................................................................ 74

Applications (Menu 7)............................................................................................................................. 74

Games....................................................................................................................................................... 75

Collection ................................................................................................................................................ 75

Other options available for an application or application set.............................................. 76

Downloading a Java application................................................................................................... 77

Extras (Menu 8)......................................................................................................................................... 77

Calculator................................................................................................................................................ 77

Making a currency conversion....................................................................................................... 78

Stopwatch............................................................................................................................................... 78

Countdown timer.................................................................................................................................. 79

Services (Menu 9)..................................................................................................................................... 79

Basic steps for accessing and using browser services................................................................ 80

Setting up the phone for a browser service.................................................................................. 80

Saving the service settings received as a message.................................................................. 80

Keying in the service settings manually ..................................................................................... 81

Appearance settings ......................................................................................................................... 81

Cookie settings................................................................................................................................... 81

Making a connection to a browser service.................................................................................... 82

Browsing the pages of a service....................................................................................................... 83

Using the phone keys while browsing......................................................................................... 83

Options while browsing................................................................................................................... 83

Disconnecting from a browser service............................................................................................ 84

Bookmarks............................................................................................................................................... 84

Receiving a bookmark...................................................................................................................... 85

Service inbox.......................................................................................................................................... 85

Emptying the cache memory............................................................................................................. 86

Browser security.................................................................................................................................... 86

Security module................................................................................................................................. 86

Certificates .......................................................................................................................................... 87

Go to (Menu 10) ....................................................................................................................................... 88

SIM services (Menu 11).......................................................................................................................... 88

6. Battery information....................................................................................... 89

Charging and discharging...................................................................................................................... 89

Nokia battery authentication guidelines........................................................................................... 90

Care and maintenance ...................................................................................... 93

Additional safety information.......................................................................... 95

FOR YOUR SAFETY

Read these simple guidelines. Not following them may be dangerous or illegal. Read the

complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it

may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while

driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect

performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Do not use the phone at a refueling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Do

not touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible

products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important

information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety

instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press

as many times as

needed to clear the display and return to the start screen. Enter the emergency

number, then press

permission to do so.

. Give your location. Do not end the call until given

■ ABOUT YOUR DEVICE

The wireless device described in this guide is approved for use on the EGSM 900 and GSM

1800 networks. Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and legitimate

rights of others.

Warning: To use any features in this device, other than the alarm clock, the device

must be switched on. Do not switch the device on when wireless device use may

cause interference or danger.

■ Network services

To use the phone you must have service from a wireless service provider. Many of the

features in this device depend on features in the wireless network to function. These

network services may not be available on all networks or you may have to make specific

arrangements with your service provider before you can utilize network services. Your

service provider may need to give you additional instructions for their use and explain what

charges will apply. Some networks may have limitations that affect how you can use

network services. For instance, some networks may not support all language-dependent

characters and services.

Your service provider may have requested that certain features be disabled or not activated

in your device. If so, they will not appear on your device menu. Your device may also have

been specially configured. This configuration may include changes in menu names, menu

order, and icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some

features of this device, such as multimedia messaging (MMS) and browsing, require network

support for these technologies.

■ Shared Memory

The following features in this device may share memory: contact list; text and multimedia

messages; distribution lists; images and ringing tones in the Gallery menu; calendar notes,

and Java^tmgames and applications. Use of one or more of these features may reduce the

memory available for the remaining features sharing memory. For example, saving many

images may use all of the available memory. Your device may display a message that the

memory is full when you try to use a shared memory feature. In this case, delete some of the

information or entries stored in the shared memory features before continuing. Some of the

features, such as cache and bookmarks may have a certain amount of memory specially

allotted to them in addition to the memory shared with other features.

■ Chargers and enhancements

Check the model number of any charger before use with this device. This device is intended

for use when supplied with power from AC-1, ACP-7, ACP-8, ACP-12, LCH-9, and LCH-12

chargers.

Warning: Use only batteries, chargers, and enhancements approved by Nokia for

use with this particular model. The use of any other types may invalidate any

approval or warranty, and may be dangerous.

Warning: Do not use the Nokia Retractable Headset HDC-10 with this phone.

For availability of approved enhancements, please check with your dealer. When you

disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

Charging the battery

1. Connect the lead from the charger to the base of

the phone.

2. Connect the charger to an AC wall outlet. The

battery indicator bar starts scrolling.

When the battery is fully charged, the bar stops

scrolling.

3. Disconnect the charger from the phone and the AC

outlet.

A few practical rules about accessories and enhancements.

•

Keep all accessories and enhancements out of the reach of small children.

When you disconnect the power cord of any accessory or enhancement, grasp and pull

the plug, not the cord.

•

Check regularly that enhancements installed in a vehicle are mounted and are operating

properly.

Installation of any complex car enhancements must be made by qualified personnel only.

General information

■ Sticker in the sales package

The sticker contains important information for service and customer- support

purposes. Keep this sticker in a safe place.

Attach the

sticker to your warranty card.

■ Access codes

• Security code: This code, which is supplied with your phone, protects your

phone against unauthorised use. The preset code is 12345.

For more information on using the security code, see Security settings on page

67.

• PIN code: This code, which may be supplied with your SIM card, protects the

card against unauthorised use. If you activate the PIN code request function in

the Security settings menu, the code is requested each time the phone is

switched on.

If you enter an incorrect PIN code three times in succession, the SIM card is

blocked. You must enter the PUK code to unblock the SIM card and set a new

PIN code.

• PIN2 code: This code may be supplied with the SIM card and is required to

access some functions, such as charging unit counters.

Change the security code, PIN code, and PIN2 code in Access codes in the

Security settings menu. Keep the new codes secret and in a safe place separate

from your phone.

• PUK and PUK2 codes: These codes may be supplied with the SIM card. If this is

not the case, contact your service provider.

• Barring password: This code is needed when using the Call barring service

function in the Security settings menu.

■ Light alerts

The display and keypad lights notify you of different phone functions by flashing.

The following phone functions are examples of when lights are used:

• An incoming call arrives.

• An incoming SMS or multimedia message arrives.

• A calendar note or countdown timer expires, or the alarm clock or low battery

activates an alarm.

You can activate the light alerts using the Light sequences function in the Profiles

menu, see page 57.

■ Downloading content and applications

You may be able to download new content (for example images and ringing tones)

and Java applications from Internet sites into the phone (network service).

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does

not warrant or endorse these sites. If you choose to access them, you should take the same

precautions, for security or content, as you would with any Internet site.

Important: Only install and use applications and other software from sources that

offer adequate security and protection against harmful software.

■ GPRS

GPRS (General Packet Radio Service) is a network service that allows mobile

phones to be used for sending and receiving data over an Internet Protocol (IP)-

based network. Via a GPRS connection you can, for example, send and receive

multimedia messages (network service).

To use the GPRS service, subscribe to it through your network operator or service

provider and save the GPRS settings for the functions that you want to use over

the GPRS network. For information on pricing, availability and data transfer speed,

contact your network operator or service provider.

Note that for some applications, such as browsing WAP or xHTML pages, you may

be able to select either GPRS or GSM data (CSD, Circuit Switched Data).

For information on the indicators shown during a GPRS connection, see GPRS

connection on page 62.

■ Nokia support and contact information

Check www.nokia.com/support or your local Nokia Web site for the latest version

of this guide, additional information, downloads, and services related to your

Nokia product.

On the Web site, you can get information on the use of Nokia products and

services. If you need to contact customer service, check the list of local Nokia

contact centers at www.nokia.com/customerservice.

For maintenance services, check your nearest Nokia service center location at

www.nokia.com/repair.

1. Getting started

■ Keys

1. Signal intensity of the cellular network at your

current location.

2. Battery charge level.

3. Name of the cellular network or the operator

logo.

4. Left selection key option.

5. Right selection key option.

The right selection key can be Contacts or the

function selected in the Right selection key

setting in the Personal shortcuts menu, or it

may be a name or logo specific to a network

operator.

6. Selection keys

and

, each key

performs the function displayed above it.

7. 4-way scroll keys (

and

)

Enable scrolling through names, phone numbers, menus or settings. During a

call, press to increase and to decrease the earpiece volume. In

standby mode, press

•

for the names and phone numbers saved in Contacts

to write a message

to access the Calendar

Note that the time and date must be set first.

dials a phone number and answers calls, or shows the most recently

dialled numbers in standby mode.

ends an active call or rejects a call, and also switches the phone on and

off. Exits from any function.

Closing the fold also exits from any function.

10.

enter numbers and characters.

and

are used for various purposes in different functions.

■ Inserting a SIM card

Keep all SIM cards out of the reach of small children.

For availability and information on using SIM card services, contact your SIM card vendor.

This may be the service provider, network operator, or other vendor.

Open the SIM cover on the side of the

phone by pulling it out and bending it down

(1). Insert the SIM card into the phone with

the bevelled corner facing right (2). Push

the SIM card in and close the SIM cover (3).

Note that if you remove your SIM card

while using the phone, Insert SIM card

appears on the display. Reinsert your SIM

card and enter your PIN to restart your

phone.

■ Inserting a battery

Always switch the device off and disconnect the charger before removing the battery.

Release the catch (1). Remove the back cover (2). Insert the battery (3). Replace

the back cover (4).

■ Putting on the wrist strap

Connect the wrist strap as indicated.

■ Opening the fold

To use the phone, you must open the fold as

shown in the figure. Do not try to force the fold

to open more than the hinge allows.

Close the fold by pushing from the top part of

the phone, not from the hinge.

■ Switching the phone on and off

Press and hold the power key

for more than 3 seconds.

• If the phone asks for a PIN code or security code, key in the code and press OK.

• If the phone displays Insert SIM card even though the SIM card is properly

inserted, or SIM card not supported, contact your network operator or service

provider. Your phone does not support 5-Volt SIM cards and the card may need

to be changed.

Your device has an internal antenna.

Note: As with any other radio transmitting device, do not

touch the antenna unnecessarily when the device is

switched on. Contact with the antenna affects call

quality and may cause the device to operate at a higher

power level than otherwise needed. Avoiding contact

with the antenna area when operating the device

optimises the antenna performance and the battery life.

2. Basic functions

■ Making a call

1. Open the fold and key in the phone number, including the area code.

To make international calls: Press

twice for the + character and key in

the country code, area code (omit the leading zero, if necessary) and phone

number.

Press Clear to delete the last entered digit.

2. Press

volume of the earpiece or headset.

3. Press or close the fold to end the call or to cancel the call attempt.

to call the number. Press

to increase or

to decrease the

Making a call using the contacts list

In standby mode, press

to find the name that you want. Press

to call the number.

Calling a recently dialled number

To redial one of the last twenty phone numbers that you have called or attempted

to call, press

want, and press

once in standby mode, scroll to the phone number or name you

Calling your voice mailbox

To call your voice mailbox (network service) in standby mode, press and hold

or press

and

When you have received a voice message,

may be shown at the top of the

display (network service). Press Listen to call your voice mailbox.

For more information on voice messages, see Voice messages on page 45.

Speed dialling a phone number

If you have assigned a phone number to one of the keys

the phone number by choosing one of the two options below:

• In standby mode, press the desired number key and

, you can call

• If the Speed dialling function is set on, press and hold the number key in

standby mode until the call is started.

For more information on assigning speed dial keys, see Speed dials on page 55.

For more information on the Speed dialling function, see Call settings on page

63.

In-call operations

You can press Options for some of the following functions during a call:

Mute or Unmute, End call, End all calls, Contacts, Menu, Hold or Unhold, New call

(network service), Conference (network service), Private call (network service),

Answer, Reject, Swap (network service), Send DTMF, Lock keypad, Transfer

(network service), Headset, Auto volume on or Auto volume off.

Select

•

Auto volume on / Auto volume off to set the automatic volume control to on or

off. See Call settings on page 63.

•

Transfer to connect the held call to the active call and to disconnect yourself

from the call.

Headset to switch the active call to the respective compatible accessory when

the accessory is connected to the phone.

To make another call during a call (network service), press Options and select New

call. Key in the phone number, or search for it in the contacts, and press Call or

. The first call is put on hold.

• To switch between the two calls, press Swap or

. To end the active call,

press , or press Options and select End call. To end both calls, press

Options and select End all calls.

• To join the two calls into a conference call (network service), press Options and

select Conference. To have a private conversation with one of the participants,

select Private call and the participant. To rejoin the call, select Conference. To

end the call, press

■ Answering or rejecting an incoming call

Open the fold and press

to answer the call. If you do not press

within

five seconds, the call is automatically answered. If you want to mute the ringing

tone, press Silence.

To reject the call, press

, or press Options and select Reject. You can also open

the fold and close it within 1.5 seconds to reject a call. The rejected call will be

diverted if you have activated a call divert option such as Divert if busy.

Call waiting

You can answer a call while you have another call in progress if you have

activated the Call waiting function in the Call settings menu (network service). To

answer the waiting call, press Answer or

. The first call is put on hold.

■ Keypad lock (Keyguard)

You can lock the keypad to prevent the keys being accidentally pressed.

To lock the keypad, press Menu in standby mode and then

is not activated when you close the fold. When the keypad is locked,

at the top of the display. To unlock the keypad, press Unlock and

quickly. Keyguard

is shown

quickly.

. During a call,

When the keypad is locked, you can answer a call by pressing

the phone can be operated normally. When you end or reject the call, the keypad

will automatically be locked.

For information on setting the keypad to lock automatically after a certain length

of time, see Automatic keyguard on page 65.

When the keypad lock is on, calls may be possible to the official emergency number

programmed into your device.

3. Writing text

You can key in text in two different ways, using traditional text input

, or

predictive text input (built-in dictionary)

To quickly change the text input method when writing text, press

twice.

Using traditional text input: Press repeatedly the key marked with the letter that

you want until the letter appears.

Using predictive text input:

1. Key in the word that you want by pressing each key once for one letter. The

word changes after each keystroke. For example, to write ‘Nokia’ when the

English dictionary is selected, press

2. If the displayed word is the one that you want, press

next word.

and start writing the

• If you want to change the word, press

you want appears.

repeatedly until the word that

• If the "?" is displayed after the word, the word is not in the dictionary. To

add the word to the dictionary, press Spell, key in the word (traditional text

input is used) and press OK.

Tips for writing text with traditional and predictive text input:

• To move the cursor left or right, press

• To add a space, press

, respectively.

• To delete the character to the left of the cursor, press Clear. To clear the screen,

press and hold Clear.

• To switch between upper and lower cases, or between traditional and

predictive text input, press

of the display.

repeatedly and check the indicator at the top

• To switch between letters and numbers, press and hold

• To add a number, press and hold the desired key.

• To get a list of special characters, press and hold

, select the character that

you want, and press Use. In traditional text input, you can also add

punctuation marks and certain special characters by pressing

repeatedly.

• Traditional: To key in a letter which is on the same key as the previous one,

press

(or wait until the cursor appears), and key in the new

letter.

• Predictive: To add a compound word, key in the first half of the word, press

, and then key in the second half.

4. Using the menu

Most of the menu functions are provided with a brief help text. To view the help

text, scroll to the desired menu function and wait for about 15 seconds.

For information on switching the Help text activation function on or off, see the

Phone settings menu on page 65.

■ Accessing a menu function

By scrolling

1. Press Menu in standby mode.

2. Press

to scroll to the main menu that you want, and press

Select to enter it.

3. Scroll to a submenu and press Select.

If the submenu contains further submenus repeat this step.

4. Press Back to return to the previous menu level, or press Exit or

to exit to

standby mode.

By using a shortcut number

The menus, submenus and setting options are numbered. The shortcut number is

shown at the top right of the display.

Press Menu in standby mode. Within two seconds, key in the shortcut number of

the main menu that you want to open. Repeat this for the submenu and setting

option.

■ List of menu functions

1. Messages

2. Topics

3. Language

1. Text messages

1. Create message

2. Inbox

4. Info topics saved on SIM card

5. Read

5. Message settings

1. Text messages

2. Multimedia msgs.

3. Other settings

3. Create SMS e-mail

4. Sent items

5. Saved text msgs.

6. Templates

7. My folders

8. Distribution lists

9. Delete messages

2. Multimedia msgs.

1. Create message

2. Inbox

6. Service commands

2. Call register

1. Missed calls

2. Received calls

3. Dialled numbers

3. Outbox

4. Sent items

5. Saved items

6. Delete messages

3. Voice messages

4. Delete recent call lists

1. All

2. Missed

3. Received

4. Dialled

1. Listen to voice messages

2. Voice mailbox number

4. Info messages

1. Info service

5. Call duration

1. Last call duration

2. Received calls' duration

3. Dialled calls' duration

1. Shown only if info message topics can be saved to the SIM card.

2. Shown only if info messages have been received.

4. All calls' duration

5. Clear timers

8. Service numbers¹

9. My numbers

6. GPRS data counter

1. Data sent in last session

2. Data received in last session

3. All sent data

4. All received data

5. Clear counters

7. GPRS connection timer

1. Duration of last session

2. Duration of all sessions

3. Clear timers

10.Caller groups

4. Settings

1. Profiles

2. Tone settings

1. Incoming call alert

2. Ringing tone

3. Ringing volume

4. Vibrating alert

5. Message alert tone

6. Keypad tones

7. Warning tones

8. Alert for

3. Contacts

1. Search

2. Add new contact

3. Delete

4. Copy

3. Light sequences

4. Display settings

1. Wallpaper

2. Colour schemes

3. Operator logo

4. Screen saver timeout

5. Display brightness

6. Menu view

5. Time and date settings

1. Clock

5. Settings

1. Memory in use

2. Contacts view

3. Memory status

6. Speed dials

7. Info numbers

1. Shown if supported by your SIM card. For availability, contact your network

operator or service provider.

2. Date

8. Start-up tone

10.Enhancement settings

3. Auto-update of date & time

6. Personal shortcuts

11. Security settings

1. PIN code request

2. Call barring service

3. Fixed dialling

4. Closed user group

5. Security level

1. Right selection key

2. Select ’Go to’ options

3. Organise ’Go to’ options

7. Connectivity

1. GPRS connection

6. Access codes

8. Call settings

1. Call divert

12. Restore factory settings

5. Gallery

2. Automatic volume control

3. Anykey answer

4. Automatic redial

5. Speed dialling

1. View folders

2. Add folder

6. Call waiting

7. Summary after call

8. Send my caller ID

9. Phone settings

1. Phone language

2. Memory status

3. Automatic keyguard

4. Cell info display

5. Welcome note

6. Operator selection

7. Help text activation

3. Delete folder

4. Rename folder

5. Memory status

6. Activation key list

7. Downloads

6. Organiser

1. Alarm clock

2. Calendar

7. Applications

1. Shown only if the phone is or has been connected to a compatible enhancement.

1. Games

2. Bookmarks

2. Collection

3. Download links

4. Service inbox

5. Settings

8. Extras

1. Calculator

6. Go to address

7. Clear the cache

2. Stopwatch

3. Countdown timer

10. Go to

11. SIM services

9. Services

1. Home

1. Only shown if supported by your SIM card. The name and contents vary depending on the SIM

card.

5. Menu functions

■ Messages (Menu 1)

Before you can send text, picture, multimedia, or e-mail messages,

you must set your message settings. For more information, see

Message settings on page 46.

Note: When sending messages, your device may display the words "Message

Sent". This is an indication that the message has been sent by your device to the

message centre number programmed into your device. This is not an indication

that the message has been received at the intended destination. For more details

about messaging services, check with your service provider.

Text and picture messages (SMS)

You can write and send multi-part messages, which may include pictures,

consisting of several ordinary text messages (Network Service). Invoicing may be

based upon the number of ordinary messages that are needed for any multi-part

message. The number of available characters/the current part number of a multi-

part message is shown on the top right of the display, for example 120/2. If you

use special characters, such as Cyrillic characters, more parts may be needed for

the message than would otherwise be required. Note that predictive text input

may use special characters.

Note: The picture message function can be used only if it is supported by your

network operator or service provider. Only compatible devices that offer picture

message features can receive and display picture messages. The appearance of a

message may vary depending on the receiving device.

Writing and sending a text or picture message

1. Press Menu in standby mode and select Messages, Text messages and Create

message.

2. Key in a message. See Writing text on page 27.

• To insert a picture, or a phone number or name from the contacts list into

the message, press Options and select:

•

Insert picture. Scroll to the desired picture, press View and Insert. If you

wish, press Options and select an option to preview and change the

message before sending it.

•

Insert number. Press Search or

and select the number.

Insert contact. Scroll to the desired name and press Options. Select

Insert contact or View details if you want to insert a number or text item

saved with the name.

• To use a predefined text as a base for the message, press Options and select

Use template and the desired template.

• To save the message in the Saved text msgs. or Templates folder or in a

folder that you have created inside the My folders folder, press Options and

select Save message.

3. To send the message, press

, or press Options and select Send, key in the

recipient’s phone number or search for it in the contacts list, and press OK.

• To send a message to several people, press Options and select Sending

options and Send to many. Scroll to the first recipient and press Send. When

you have selected all your recipients, press Done.

• To send a message using predefined settings, press Options and select

Sending options and Sending profile.

The sent message is saved in the Sent items folder.

Your device supports the sending of text messages beyond the character limit for a single

message. Longer messages are sent as a series of two or more messages. Your service

provider may charge accordingly. Characters that use accents or other marks, and characters

from some language options like Chinese, take up more space limiting the number of

characters that can be sent in a single message.

Writing and sending an e-mail message

You may be able to write and send e-mail messages (network service). To save an

e-mail address in the phone book, see Saving multiple numbers and text items per

name on page 52.

1. Press Menu, and select Messages, Text messages and Create SMS e-mail.

2. Key in the recipient’s e-mail address or search for it in the contacts list and

press OK.

3. If you wish, key in the subject for the message and press OK.

4. Key in the e-mail message.

5. To send the message, press Options, select Send SMS e-mail and press OK.

Reading and replying to a text, picture or e-mail message

Important: Exercise caution when opening messages. E-mail messages may

contain malicious software or otherwise be harmful to your device or PC.

When you receive a message, the

followed by messages received are shown.

If the indicator blinks, the text message memory is full. For information on

indicator and the number of new messages

deleting messages, see Deleting messages on page 45.

1. Press Show to view the new message immediately.

To view the messages later, press Exit. When you want to read the messages,

press Menu and select Messages, Text messages and Inbox.

2. Select the message that you want to read, and use the scroll keys to browse

through the message.

indicates an unread message.

3. To reply to the displayed message, press Options and select Reply. Select

•

Empty screen to write a message from scratch.

Original text to include the original message in the reply.

Template to use a preset text as a base for the new message. For

information on the templates, see Folders for text and picture messages on

page 40.

When replying to an e-mail message, confirm or edit the e-mail address and

subject and then write your reply.

4. To send your reply, press Options, select Send, and press OK. OR: Press

twice.

Other functions accessible with the Options key

While reading a message, pressing Options also allows access to the following

functions: Delete, Use detail, Forward, Edit (for text messages) / Edit text (for

picture messages), Move, Rename, Copy to calendar, Save picture (for picture

messages), Message details.

Select

•

Use detail to extract a phone number, e-mail address or Web address from the

message.

•

Copy to calendar to copy the message text to your phone’s calendar as a memo.

Save picture to save the picture included in a picture message in the Templates

folder.

Distribution lists

To send messages to a fixed group of people, you can define a distribution list for

that purpose in the phone’s memory. The phone sends the message separately to

each recipient on the list. Therefore, sending a message using a distribution list

may cost more than sending a message to one recipient.

Distribution lists use shared memory, see Shared Memory on page 11.

Press Menu in standby mode and select Messages, Text messages and Distribution

lists.

• To add a list, press Add (if there are no lists) or press Options and select Add

list. Enter the name for the list.

• To add a contact to the list, scroll to the list, press Options and select View list.

Press Add (if there are no lists) or press Options and select Add contact. Select

a contact from the phone’s or SIM card’s contact memory.

After writing a message, to send the message using a distribution list, press

Options, select Sending options and Send to list.

Folders for text and picture messages

To open a folder, press Menu in standby mode, and select Messages, Text

messages and then Inbox, Sent items, Saved text msgs., Templates or My folders.

• In Templates, you can save text messages that you want to use as a base for

new messages. Text templates are indicated by

and picture templates by

To edit or delete a template, select the desired template, press Options, and

select the desired function.

• In My folders you can create new folders for your messages.

To add a folder, press Add (if the folder list is empty) or press Options and

select Add folder. To delete or rename a folder, press Options and select the

desired function.

Multimedia messages (MMS)

The phone can send and receive multimedia messages of up to 100 kilobytes

(network service).

Note: Only devices that have compatible features can receive and display

multimedia messages. The appearance of a message may vary depending on the

receiving device.

If Allow multimedia reception is set to Yes or In home network, your operator or service

provider may charge you for every message you receive.

Note that multimedia messages cannot be received during a call, while using a

game or another Java application or when you have an active browsing session

using the GSM data bearer (see Keying in the service settings manually on page

81).

Because delivery of multimedia messages can fail for a variety of reasons, do not

rely solely upon them for essential communications.

Sent and received multimedia messages use shared memory, see page 11.

The default setting of the multimedia message service is generally set to on.

The appearance of a multimedia message may vary depending on the receiving

device.

content from being copied, modified, transferred or forwarded.

Writing and sending a multimedia message

Before sending a multimedia message, read Notes for sending a multimedia

message on page 43.

1. Press Menu in standby mode, and select Messages, Multimedia msgs. and

Create message.

2. Key in a message. See Writing text on page 27.

• To insert an image, press Options and select Insert.

Open a specific folder in the Gallery menu, scroll to the desired image or

sound, press Options and select Insert.

• Your phone supports multimedia messages that contain several pages. To

add a new slide to the message, press Options and select Insert and Slide.

Each slide can contain text and one image.

Select Options and:

•

Previous slide, Next slide or Slide list to navigate between slides.

Slide timing to define how long each slide is shown.

Place text first or Place text last to move the text position.

• To insert a business card or a calendar note for a compatible device, press

Options and select Insert and the desired option.

• To insert a name or number from the contacts list, press Options, select

More options, and Insert contact and the desired name or Insert number.

• To delete an image or slide from the message, press Options and select

Delete and the desired function.

• To save the message in the Saved items folder, press Options and select

Save message.

• To add a subject to the message, press Options and select More options and

Edit subject.

• To view the size or recipient of the message, press Options and select More

options and Message details.

• To view the message or slide presentation before sending it, press Options

and select Preview.

3. To send the message, press Options and select Send to number (or Send to

e-mail or Send to many).

4. Key in the recipient’s phone number or e-mail address, or search for it in the

contacts list. Press OK to send the message.

If you selected Send to many in step 3, press Options, select Search number or

Search e-mail, and select the recipients one by one from the contacts list. To

send the message, press

, or press Done and Options and select Send.

The message is saved in the Outbox folder until it is sent. The sent messages are

saved in the Sent items folder if the Save sent messages setting is Yes. See Settings

for multimedia messages on page 47.

Notes for sending a multimedia message

• It may take more time to send a multimedia message than a text message.

During sending, the animated

indicator is displayed and you can use most

of the other functions of the phone.

If the transmission is interrupted, the phone tries to re-send the message a few

times. If the transmission fails, the message remains in the Outbox folder

where you can try to re-send it later.

The wireless network may limit the size of MMS messages. If the inserted picture exceeds

this limit, the device may make it smaller so that it can be sent by MMS.

Reading and replying to a multimedia message

Important: Exercise caution when opening messages. Multimedia message

objects may contain malicious software or otherwise be harmful to your device or

PC.

When the phone is receiving a multimedia message, the animated

indicator is

displayed. When the message has been received, the

indicator and the text

Multimedia message received are shown.

If the

indicator blinks, the memory for multimedia messages is full. For

information on deleting messages, see Deleting messages on page 45.

1. Press Show to view the received message immediately.

To view the message later, press Exit. When you want to read the message,

press Menu and select Messages, Multimedia msgs. and Inbox. Select the

desired message from the list.

indicates an unread message.

2. Scroll through the message. If the message contains a slide presentation, the

presentation is played automatically.

You can press Options for the following functions: Play presentation, Continue

present., View text, Open image, Delete message, Reply / Reply to all, Use detail,

Forward to no., Forward to e-mail / Forward to many. Select

•

View text to view the text part of the message.

Open image to view the image included in the message. Press Options to

zoom in or out on the image, save it in the Gallery menu, set its contrast or

view its details.

Deleting messages

To delete a text or multimedia message that you are reading or viewing, press

Options and select the desired function.

To delete all messages from a folder or all the folders:

1. Press Menu in standby mode and select Messages, Text messages or

Multimedia msgs., and Delete messages.

2. To delete all the messages from a folder, select the desired folder and press OK.

To delete all the messages from all the text message folders, select All

messages and press OK.

Voice messages

Voice mailbox is a network service and you may need to subscribe to it first.

Press Menu in standby mode, and select Messages and Voice messages. Select

Voice mailbox number to save the number of your voice mailbox or Listen to voice

messages to call it.

Tip: To quickly call your voice mailbox, press and hold

Info messages

This network service allows you to receive messages on various topics from your

service provider.

Press Menu in standby mode, and select Messages and Info messages. For

available topics and the relevant topic numbers, contact your service provider.

Message settings

Settings for text and e-mail messages

Press Menu in standby mode, and select Messages, Message settings, Text

messages and Sending profile. Select the group of settings (’sending profile’) that

you want to change. Next, select

•

Message centre number to save the phone number needed for sending text and

picture messages. You obtain this number from your service provider.

Messages sent via to choose the message type Text, E-mail, Paging or Fax

(network service).

Message validity to choose how long the network should attempt to deliver

your message to its recipient (network service).

Default recipient number to save a phone number where messages are sent by

default when this sending profile is used. This setting is shown when the

Messages sent via setting is Text.

If the Messages sent via setting is E-mail, this setting is E-mail server and it

allows you to save the phone number of the e-mail server.

•

Delivery reports to request the network to send delivery reports on your

messages (network service).

Use GPRS and Yes to set the phone to send text messages over a GPRS

connection, if this is possible. Also, you can set the GPRS connection to Always

online, see GPRS connection on page 62.

•

Reply via same centre to allow the recipient of your message to send you a

reply message via your message centre (network service).

•

Rename sending profile to change the name of the sending profile. The name

of the default profile cannot be changed.

Overwriting settings

You can set the phone to automatically replace old messages with new ones. Press

Menu in standby mode, and select Messages, Message settings, Text messages

and Overwriting in sent items or Overwriting in inbox. Select Allowed to set the

phone to replace the old text messages with new ones in the Sent items or Inbox

folder, respectively.

Settings for multimedia messages

Press Menu, and select Messages, Message settings and Multimedia msgs.. Select

•

Save sent messages and Yes to set the phone to save sent multimedia messages

in the Sent items folder. If you select No, the sent messages are not saved.

Delivery reports to request the network to send delivery reports on your

messages (network service).

Scale image down to select whether images are scaled to a smaller size when

inserted into a message.

Default slide timing to define how long each slide in your presentations is

shown by default.

Allow multimedia reception to allow (Yes) or prevent (No) the reception of

multimedia messages or to allow it only in your home network (In home

network).

•

Incoming multimedia messages to set the phone to automatically retrieve

received multimedia messages (Retrieve), or select Reject if you do not want to

receive multimedia messages.

This setting is not shown if Allow multimedia reception is set to No.

Connection settings to define the browser settings for retrieving newly

received multimedia messages. Activate the connection set where you want to

save the settings and then edit them. See also Keying in the service settings

manually on page 81.

For proper settings, contact your network operator or service provider.

•

Allow adverts to allow or prevent the reception of advertisements. This setting

is not shown if Allow multimedia reception is set to No or if Incoming

multimedia messages is set to Reject.

Font size setting

To select the font size for reading and writing messages, press Menu, and select

Messages, Message settings, Other settings and Font size.

Service commands

You can send service requests to your service provider (network service). To access

this menu, press Menu in standby mode, and select Messages and Service

commands. Key in the desired characters and press Send.

■ Call register (Menu 2)

In this menu, you can view the phone numbers of missed, received

and dialled calls, and the approximate length of your calls.

Missed, received and dialled calls

To view the phone numbers of missed, received and dialled calls, press Menu in

standby mode and select Call register. Select

•

Missed calls to view up to ten phone numbers from which somebody has most

recently tried to call you with no success (network service).

Received calls to view up to ten phone numbers from which you have most

recently accepted calls (network service).

Dialled numbers to view up to twenty phone numbers that you have most

recently called or attempted to call. See also Calling a recently dialled number

on page 23.

•

Delete recent call lists to clear the lists of missed, received, and dialled calls.

Notes about missed, received and dialled calls

• The phone registers missed and received calls only if the network supports

these functions and the phone is switched on and within the network’s service

area.

• If you press Options in the Missed calls, Received calls or Dialled numbers

menu, you can, for example, view the date and time of the call, call the

registered phone number, save it in the contacts list or send a message to the

number.

Call counters and call timers

Note: The actual invoice for calls and services from your service provider may vary,

depending on network features, rounding off for billing, taxes and so forth.

Press Menu in standby mode and select Call register. Select

•

Call duration to view the approximate duration of your incoming and outgoing

calls.

GPRS data counter to view the amount of data that has been sent and received

during the GPRS connections.

GPRS connection timer to view the approximate duration of GPRS connections.

■ Contacts (Menu 3)

You can save names and phone numbers (contacts) in the phone’s

memory and in the SIM card’s memory.

To access this menu: Press Menu in standby mode and select Contacts.

The number of names that can be saved depends on their length, and the number

and length of related phone numbers and text items. The phone supports SIM

cards that can save up to 250 names and phone numbers.

Contacts saved in the phone’s memory use shared memory, see page 11.

Alternative ways to access the functions in this menu

You can access the functions by pressing Contacts in standby mode (or by

pressing Go to and selecting Contacts).

Some of the functions can also be accessed as follows: Press

standby mode, scroll to the name that you want, press Details, scroll to a number

or text item, press Options and select the desired function.

To access the contacts during a call, press Options and select Contacts.

Selecting the settings for contacts

Press Menu in standby mode and select Contacts and Settings. Select

•

Memory in use to select the contact memory that you want to use. If you want

to search for names and phone numbers in both memories, select Phone and

SIM. In this case, the names and numbers will be saved in the phone’s memory.

Contacts view to select how the names, numbers and images are displayed in

the contacts list. For example, select Name and image to view the names with

the attached images.

Memory status to view how much free memory is available in each contact

memory.

Saving names and phone numbers

1. Press Menu in standby mode and select Contacts and Add new contact.

2. Key in the name and press OK to save it.

3. Key in the phone number, including the area code, and press OK to save it.

• To use the phone number while abroad, press

twice (for the +

character) and key in the country code, area code (omit the leading zero, if

necessary) and phone number.

4. When the name and number are saved, press Done.

Tip: To quickly save a name and phone number, key in the phone number in

standby mode, press Options and select Save.

Saving multiple numbers and text items per name

You can save different types of numbers and text items per name in the phone’s

contact memory.

The first phone number that you save with the name is the default number. It is

indicated with a frame around the number type indicator, for example

. When

you select a name from the contacts list, for example to make a call, the default

number is used unless you select another number.

1. Make sure that the selected memory is Phone or Phone and SIM.

2. Press

in standby mode.

3. Scroll to the name to which you want to add a number or text item, and press

Details.

4. Press Options, and select Add number, Add detail or Change type.

• To add a phone number, select Add number and a number type. Key in the

number, and press OK to save it.

• To add a text item, select Add detail and a text type, for example E-mail

address. To add a special character, press

• To change the type of the selected number or text item, select Change type

and the desired type.

5. Press Back and then Exit to return to standby mode.

Changing the default number

Press or in standby mode, scroll to the desired name and press

Details. Scroll to the number that you want to set as the default number. Press

Options and select Set as default.

Adding an image to a saved name or number

You can add an image to a name or number saved in the phone’s memory. The

image is shown when you receive a call from the given phone number.

Press

in standby mode, scroll to the name (and number) to which

you want to add an image and press Details. Press Options and select Add image.

The list of folders in the Gallery menu is shown. Scroll to the desired image, press

Options and select Save to contacts.

Searching for a name in the contacts

1. Press Menu in standby mode and select Contacts and Search. OR: Press

in standby mode.

2. Key in the first letter(s) of the desired name, if you want.

3. Scroll to the desired name, and press Details. If the name is saved on the SIM

card,

is shown at the top of the display.

4. Scroll through the phone numbers and text items added to the name.

Deleting contacts

Press Menu in standby mode and select Contacts and Delete. Select One by one or

Delete all.

Deleting a name and number will also delete the additional numbers, text items

and image added to it. Deleting an image from the contacts does not delete it

from the Gallery menu.

Deleting a number, text item or image added to a name

Press

in standby mode, scroll to the desired name (and number)

and press Details. Scroll to the number, text item or image that you want to

delete, press Options, select the appropriate function, and press OK.

Editing a name, number or text item

Press

in standby mode, scroll to the desired name and press

Details. Scroll to the desired name, number or text item and press Options. Select

the desired function, for example Edit detail to edit a text item.

Copying contacts

You can copy names and phone numbers from the phone to the SIM card and vice

versa. Text items or images saved in the phone will not be copied to the SIM card.

Press Menu in standby mode and select Contacts and Copy. Select the copying

direction. Select One by one, All or Default numbers (shown when you copy from

the phone). Select whether you want to keep the original names and numbers

(Keep original) or move them (Move original).

Other functions related to the contacts list

To access the following functions, press Menu in standby mode and select

Contacts. Select

•

Info numbers to call the information numbers of your service provider if they

are available on your SIM card (network service).

Service numbers to call the service numbers of your service provider if they are

available on your SIM card (network service).

My numbers to view the phone numbers assigned to your SIM card if this is

allowed by the card.

Caller groups to arrange the names and phone numbers saved in the Contacts

menu into caller groups. For each group, you can select a ringing tone and a

logo that is shown when you receive a call from an identified phone number

that belongs to the given group.

You can select from the following functions: Group name, Group ringing tone,

Group logo, Group members.

If you selected Group members, press Add (or press Options and select Add

contact) to add a name to the group. To delete a name from the group, press

Options and select Remove contact.

See also Alert for in Tone settings on page 58.

Speed dials

You can set the keys

to work as speed dialling keys. To make a call

using speed dialling, see page 24.

Assigning a phone number to a speed dialling key

Press Menu in standby mode and select Contacts and Speed dials. Scroll to the

desired key and press Assign. Press Search and select the name and number that

you want to assign to the selected key.

If a phone number is already assigned to the key, you can view or change the

number or delete the assignment by pressing Options and selecting the desired

function.

Business cards

You can send or receive a person’s contact information as a business card.

To send a business card to a compatible phone or other device that supports the

vCard standard: Press

in standby mode, scroll to the desired name,

and press Details. Press Options and select Send bus. card and Via text message or

Via multimedia. (network service).

When you receive a business card, press Show and Save to save the business card

in the phone’s memory. To discard the business card, press Exit and OK.

■ Settings (Menu 4)

In this menu, you can change various phone settings. You can also

reset some menu settings to their default values.

To access this menu: Press Menu in standby mode and select Settings.

Profiles

Your phone has several setting groups, ’profiles’, for which you can customise the

phone tones for different events and environments.

To access this menu: Press Menu in standby mode and select Settings and

Profiles.

1. Select a profile that you want to activate or whose settings you want to

change.

2. Select Activate, Personalise or Timed.

• To activate the selected profile, select Activate.

• To activate the profile for a certain amount of time, select Timed and set

the end time. When this time expires, the previous profile that was not

timed, becomes active.

• To change the profile settings, select Personalise. Select the setting that

you want to change and make the change.

Select Light sequences to activate the display and keypad lights for certain

functions. For more information, see Light alerts on page 15.

For information on the other settings, see Tone settings on page 58. With

Profile name you can rename the selected profile. The General profile

cannot be renamed.

The name of the currently active profile is shown in standby mode, except when

the General profile is active. If the profile is timed,

is shown in front of its

name.

Tip: To change the profile quickly in standby mode, press the power key

and select the profile that you want to activate.

Tone settings

You can change the tone and vibrator settings of the currently selected profile.

The same settings can also be found in the Profiles menu, see page 57.

To access this menu: Press Menu in standby mode, and select Settings and Tone

settings. Select

•

Incoming call alert to choose how the phone notifies you of an incoming voice

call. The options are Ringing, Ascending, Ring once, Beep once and Off.

Note that when the fold is open, all ringing tones are played in ascending

mode.

•

Ringing tone to select the tone that rings when you receive a voice call. To

select a ringing tone from the Gallery menu, select Open gallery.

Ringing volume to select the volume level for the ringing tones and message

alert tones.

Vibrating alert to set the phone to vibrate when you receive a call or message.

The vibrating alert does not work when the phone is connected to a charger.

Message alert tone to select the tone that you hear when you receive a

message. To select the tone from the ringing tone list, select Ringing tone and

the desired tone.

•

Keypad tones to select the volume for keypad tones.

•

Warning tones to set the phone to sound tones, for example, when the battery

is running out of power.

Alert for to set the phone to ring only upon calls from phone numbers that

belong to a certain caller group. Scroll to the caller group that you want or All

calls and press Mark. See also the Caller groups setting in the Contacts menu.

When Incoming call alert is set to Off and Message alert tone is set to Off, is

shown in standby mode.

Adding new tones to your phone

For availability of tones via the text messaging (SMS), multimedia messaging

(MMS) or browser service, contact your network operator or service provider. The

tones are saved in the Gallery menu.

Display settings

To access this menu: Press Menu in standby mode, and select Settings and

Display settings. Select

•

Wallpaper to set the phone to show a background image, ’wallpaper’, when the

phone is in standby mode.

The wallpaper images can be found in the Gallery menu. You can save new

images, for example, from multimedia messages.

To set an image as the wallpaper:

• To select the wallpaper image for the first time or to change the image,

select Select wallpaper. Scroll to the folder that you want, press Open and

scroll to the desired image. Press Options and select Set as wallpaper.

• If you have previously used the wallpaper but have then selected Off, select

On.

•

Colour schemes to select the colour for some parts of the phone display, such

as the signal strength indicator.

Operator logo to set the phone to display or hide the operator logo saved in the

phone. If there is no operator logo available in the phone, this function is

dimmed.

For availability of operator logos, contact your network operator or service

provider.

•

Screen saver timeout to set the time after which the screen saver feature is

activated. The screen saver is a power saving feature which becomes active if

the phone is not used for a certain length of time in standby mode. Note that

the screen saver is deactivated when the phone is outside the network

coverage area.

You can deactivate the screen saver by pressing any key.

•

Display brightness to change the brightness level. Press

decrease or increase the level, and press OK to accept it.

Menu view to set the way the phone displays the main menu. If you select List,

the menus are shown as a list. If you select Grid, the menus are shown as a grid.

In the grid view, the menu name is shown at the top of the display.

Time and date settings

To access this menu: Press Menu in standby mode, and select Settings and Time

and date settings. Select

•

Clock to set the time, show (or hide) the time in standby mode or select the

12-hour or 24-hour time format and the time zone. If the battery is removed

from the phone for a long time, you may need to set the time again.

The clock settings apply to several functions such as Messages, Call register,

Alarm clock and Calendar.

•

Date to show (or hide) the date in standby mode, set the date or select the date

format or date separator. If the battery is removed from the phone for a long

time, you may need to set the date again.

Auto-update of date & time to set the phone to automatically update the time

and date according to the current time zone (network service).

Automatic update of date and time does not change the time you have set for

the alarm clock, calendar or alarm notes.

Personal shortcuts

You can select the function for the right selection key shown in standby mode and

the functions (’personal shortcuts’) that can be accessed by pressing Go to in

standby mode or by entering the Go to menu.

To access this menu: Press Menu in standby mode, and select Settings and

Personal shortcuts. Select

•

Right selection key to select the function for the right selection key.

•

Select ’Go to’ options to select the functions for your shortcut list. Scroll to a

function and press Mark to add it to the list. To remove a function from the list,

press Unmark. To save the changes, press Done and Yes.

Organise ’Go to’ options to change the order of the functions on the list. Scroll

to the desired function, press Move and select where you want to move the

function to.

Connectivity

In this menu, you can define when the phone connects to the GPRS network.

GPRS connection

In this menu, you can define when the phone connects to the GPRS network

(network service). For general information about the GPRS service, see page 16.

To access this menu: Press Menu in standby mode, and select Settings,

Connectivity and GPRS.

Select GPRS connection and Always online or When needed.

• If you select Always online, the phone automatically registers to a GPRS

network when you switch the phone on, if the GPRS network is available in

your location.

If you select When needed, the phone registers and connects to the GPRS

network only if you use a function that needs the GPRS service. In this case,

establishing the connection may take longer than when Always online is

selected.

GPRS indicators

When the selected GPRS connection mode is Always online and the GPRS service

is available, is shown on the display.

When you start a function that uses the GPRS service, the phone connects to the

GPRS network, is shown and data transfer is possible.

If you receive a call or a text message, or make a call, during a GPRS connection,

is shown to indicate that the connection is suspended (on hold). The phone

tries to re-establish the connection after the call.

Call settings

To access this menu: Press Menu in standby mode, and select Settings and Call

settings. Select

•

Call divert to direct your incoming calls to your voice mailbox or to another

phone number (network service). Divert options that are not supported by your

SIM card or your network operator may not be shown.

Select the desired divert option, for example, Divert if busy to divert voice calls

when your number is busy or when you reject an incoming call. Set the divert

option on (Activate) or off (Cancel), or check whether the option is activated

(Check status).

• If you selected Activate, select where the calls are to be diverted to. For

some divert options you can also select the time after which the call is

diverted.

Several divert options can be active at the same time. When all calls are

diverted, is shown in standby mode.

Automatic volume control and On to set the phone to automatically keep the

earpiece volume at the level that you select with or during a call.

•

For example, if the environment is noisy, the phone increases the volume.

•

Anykey answer and On if you want to answer an incoming call by briefly

pressing any key, except the power key

, and selection keys.

Automatic redial to set the phone to make up to ten attempts to connect the

call after an unsuccessful call attempt.

Speed dialling and On if you want to call the names and phone numbers

assigned to the speed dial keys

by pressing and holding the

corresponding key.

•

Call waiting and Activate to request the network to notify you when you

receive a new call during a call (network service).

Summary after call and On to set the phone to briefly display the approximate

duration of the last call.

Send my caller ID to show (Yes) your phone number to the person you are

calling or to hide it (No). If you select Set by network, the setting agreed upon

with your service provider is used. This is a network service.

Phone settings

To access this menu: Press Menu in standby mode, and select Settings and Phone

settings. Select

•

Phone language to select the language for the display texts. If you select

Automatic, the phone selects the language according to the information on

the SIM card.

•

Memory status to view the total amount of free and used shared memory and

the amount of memory used by different functions.

Automatic keyguard to set the keypad to lock automatically after a certain

length of time when the phone is in standby mode. See also Keypad lock

(Keyguard) on page 26.

To activate the automatic keyguard, select On and set the time after which the

keypad is locked. To deactivate the automatic keyguard, select Off.

When the keyguard is on, calls may be possible to the official emergency number

programmed into your device.

•

Cell info display to set the phone to indicate when it is used in a cellular

network based on the Micro Cellular Network (MCN) technology (network

service).

•

Welcome note to define a note that is shown briefly when the phone is

switched on. To save the note, press Options and select Save.

Operator selection to set the phone to automatically select a cellular network

that is available in your area (Automatic) or to select the desired network from

a list (Manual).

The selected network must have a roaming agreement with your home

operator’s network. If No network access is displayed, select another network.

The phone stays in manual mode until automatic mode is selected or another

SIM card is inserted into the phone.

•

Help text activation to set the phone to show help texts that guide you in using

the menu functions.

Start-up tone to set the phone to play a tone when the phone is switched on.

Enhancement settings

You can define the settings that the phone uses by default when it is connected to

a compatible enhancement.

To access this menu: Press Menu in standby mode, and select Settings and

Enhancement settings.

Select the desired enhancement, for example Headset. Depending on the

enhancement, you can select some of the following functions:

•

Default profile to select the profile that is automatically activated when you

connect the selected enhancement to the phone.

Automatic answer to set the phone to automatically answer an incoming call

after five seconds. If the Incoming call alert is set to Beep once or Off,

automatic answer cannot be used.

•

Lights to set the lights On or Off.

Enhancement indicators in standby mode

When a compatible enhancement is connected to the phone, the corresponding

indicator (for example ) is shown in standby mode.

Security settings

To access this menu: Press Menu in standby mode, and select Settings and

Security settings.

When security features that restrict calls are in use (such as call barring, closed user group,

and fixed dialing) calls may be possible to the official emergency number programmed into

your device.

Select

•

PIN code request to set the phone to ask for your PIN code every time the

phone is switched on. Some SIM cards do not allow this setting to be changed.

Call barring service to restrict the calls that can be made or received with the

phone (network service).

Fixed dialling to restrict calls and text messages from your phone to selected

phone numbers, if allowed by your SIM card (network service).

When the fixed dialling option is on, GPRS connections can only be used for

sending text messages. The recipient’s phone number and the message centre

number have to be included on the fixed dialling list.

•

Closed user group to specify a group of people whom you can call and who can

call you (network service). When you use a closed user group, the group

number is shown in standby mode.

•

Security level to define when the phone asks for the security code.

If you select Phone, the phone asks for the security code when a new SIM card

is inserted into the phone.

If you select Memory, the security code is requested when the memory in use is

SIM card and you want to change the memory to Phone or Phone and SIM or

when you want to copy names and numbers from one contacts list to another.

When you change this setting, the numbers in the menus Missed calls,

Received calls and Dialled numbers are deleted.

•

Access codes to change the security code, PIN code, PIN2 code or barring

password. Codes can only include numbers from 0 to 9.

Restore factory settings

You can reset some of the menu settings to their original values.

Press Menu in standby mode, and select Settings and Restore factory settings. Key

in the security code and press OK. Note that this function does not delete the

information that you have saved or downloaded to the phone.

■ Gallery (Menu 5)

In this menu, you can manage graphics and tones that you have

saved, for example, from multimedia messages. JPEG and BMP

format files are supported. These files are arranged in folders.

Your phone supports a Digital Rights Management (DRM) system to protect

content that you have acquired to the phone. A piece of content, such as a ringing

tone, can be protected and associated with certain usage rules, for example the

number of usage times and a certain usage period. The rules are defined in the

content’s activation key that can be delivered with the content or separately,

depending on the service provider. You may be able to update these activation

keys. Always check the delivery terms of any content and activation key before

acquiring them, as they may be subject to a fee.

The gallery uses shared memory, see page 11.

1. Press Menu and select Gallery. The list of options is shown.

2. Select View folders to open the list of folders.

Other options are:

•

Add folder, Delete folder, Rename folder: You can add a new folder or delete

or rename the folder that you select. The preset folders cannot be deleted or

renamed.

•

Memory status to view how much free memory is available.

Activation key list: You can view the list of available activation keys. Scroll

to the desired file and press Options. Select Details to view the activation

keys.

•

Downloads: You can download images and tones (network service). A list of

bookmarks is shown. Select More bookmarks if you want to view the

bookmarks available in the Services menu. Select the bookmark of the

browser page that you want to access. Follow the instructions provided by

the service.

3. To open a folder, scroll to the desired folder and press Open. The files in the

folder are shown.

Pressing Options allows access to some of the functions described in Options

for the files in the gallery on page 70.

4. To view an image or listen to a sound, scroll to the desired image or sound file,

press Options and select Open.

Options for the files in the gallery

When you have selected or opened a file, you can press Options for the following

functions: Open, Delete, Send, Edit image, Move, Rename, Set as wallpaper, Set as

ring tone, Details, Sort, Activation key list. Select

•

Send to send the file as a multimedia message.

Edit image to add text and clip-art to the selected image or to crop the image.

Press Options and select the desired function.

If you selected Insert text, key in the text that you want, press OKand move the

text with the scroll keys. If you press Options, you can select the style, size and

colour of the text font and rotate the text. To confirm the changes, press

Options and select OK.

If you selected Insert clip-art, scroll to the desired image, press Options and

select Insert. Move the inserted image with the scroll keys and press OK.

To save the modified image in GIF format, press Options, select Save, edit the

image’s name, press OK and select the desired folder.

•

Details to view, for example, the size of the file.

•

Sort to sort the files and folders by name, date, format or size.

Activation key list to update the activation key of the selected file. This option

is only shown if the activation key of the file can be updated.

content from being copied, modified, transferred or forwarded.

■ Organiser (Menu 6)

In this menu, you can use the phone’s built-in alarm clock and

calendar.

To access this menu: Press Menu in standby mode and select Organiser.

Alarm clock

You can set the phone to alarm at the desired time. The alarm clock works even if

you close the fold.

To access this menu: Press Menu in standby mode and select Organiser and

Alarm clock.

To set an alarm, select Alarm time, key in the alarm time and press OK. To change

the alarm time, select On.

To set a tone for the alarm, select Alarm tone and the desired tone.

When the alarm clock is on, is shown in standby mode.

When the alarm time expires

The phone will sound an alert tone and flash Alarm! and the current time on the

display. Press Stop to stop the alarm. If you let the phone alarm for a minute or

press Snooze, the alarm stops for about ten minutes and then resumes.

If the alarm time is reached while the device is switched off, the device switches itself on

and starts sounding the alarm tone. If you select Stop, the device asks whether you want to

activate the device for calls. Select No to switch off the device or Yes to make and receive

calls. Do not select Yes when wireless phone use may cause interference or danger.

Calendar

The calendar uses shared memory, see page 11.

To access this menu: Press Menu in standby mode and select Organiser and

Calendar. The month view is shown. You can scroll through the days, weeks and

months with the scroll keys.

Tip: To quickly open the calendar in standby mode,

press

Using the different calendar views

• Month view: This view shows the weeks of a month. The current day is

indicated by a frame around it. If there are notes for the day, the day is shown

in bold. To view the notes set for a day (’day view’), scroll to the desired day,

press Options and select Day notes.

Pressing Options also allows access to the following functions: Week view,

Make a note, Go to date, Settings. Select

•

Settings to set the date and time or to select their format, the separator

character (for example - ) or the first day of the week (Week starts on). With

Auto-delete you can set the phone to delete old notes automatically after a

certain length of time.

• Day view: This view shows the notes set for the selected day. You can scroll

through the notes by pressing or and through the days by pressing

or . Press Options and select View to open the selected note (’note

view’).

Pressing Options also allows access to the following functions: Make a note,

Delete, Edit, Move, Repeat, Go to date, Send note, Copy, Settings. Select

•

Repeat to select the interval at which the note is repeated.

• Note view: This view shows the note that you opened in the day view.

You can press Options for the following functions: Edit, Delete, Move, Repeat,

Send note, Copy, Settings.

Making a calendar note

You can create a new note in the month, week or day view.

In the month or week view, scroll to the desired day, press Options and select

Make a note. In the day view, press Options and select Make a note.

Select one of the following note types:

Memo, Reminder.

Meeting,

Call,

Birthday,

Make a note and save it. For example, to save a note for a meeting with an alarm,

do as follows:

Key in the subject for the meeting, press Options and select Save. Key in the

location, press Options and select Save. Key in the start date and press OK. Key in

the end date and press OK. Key in the start time and press OK. Key in the end time

and press OK. To set the alarm for the note, select With tone or Silent (no alarm

tone) and set the alarm time.

When the phone sounds an alarm for a note

The phone beeps and displays the note. When a call note

is displayed, you can

call the number by pressing

To stop the alarm and view the note, press View. If you press Snooze when the

note is shown, the alarm stops for about ten minutes and then resumes.

To stop the alarm without viewing the note, press Exit.

■ Applications (Menu 7)

In this menu, you can use and manage the Java games and

applications installed in the phone.

To access this menu: Press Menu in standby mode and select Applications.

The phone supports Java 2 Micro Edition (J2ME^TM) which is a version of Java

technology specifically designed for small consumer electronics products.

Before you can use a Java application you have to transfer it to your phone. Java

applications use shared memory, see page 11.

Games

In this menu, you can play the Java games installed in the phone.

To access this menu: Press Menu in standby mode and select Applications and

Games.

Game settings: Select App. settings to set sounds, lights and vibrations

(Application shakes) for the games. When the Vibrating alert function in the Tone

settings menu is off, the phone does not vibrate even if you set Application shakes

to on.

To start a game, select Select game, scroll to the desired game and press

, or

press Options and select Open. You can press Options for the same functions as in

the Collection menu. Note that running some games may consume the phone’s

battery faster (and you may need to connect the phone to the charger).

To view the amount of memory available for games, select Memory.

To download a game to the phone, select Game downloads. A list of bookmarks is

shown. Select More bookmarks if you want to view the bookmarks available in the

Services menu. Select the bookmark of the browser page that you want to access.

Follow the instructions provided by the service. When downloading a game, it may

be saved in the Collection menu instead of the Games menu.

Collection

In this menu, you can use and manage the Java applications installed in the

phone.

To access this menu: Press Menu in standby mode and select Applications and

Collection.

To launch an application, select Select application. Scroll to the application or

application set that you want to use. Press Options and select Open, or press

to launch the application or to open the application set.

Note that running some applications may consume the phone’s battery faster

(and you may need to connect the phone to the charger).

Other options available for an application or application set

You can access the functions below by pressing Options in the applications list.

Select

•

Delete to delete the selected application or application set from the phone.

Details to view additional information about the application.

Update version to look for a new version of the application from an Internet

service (network service).

•

Web page to access an Internet page related to the application (network

service). This option is shown only if the application contains the Internet

address of the page.

Web access to restrict the application from accessing the network. Select Ask

first to set the phone to ask for access, Allowed to allow the access, or Not

allowed not to allow the access.

Connect via to set the phone to use specific service settings if the application

needs them. The phone uses as default the service settings for the browser.

Downloading a Java application

You can download new Java applications as follows:

• In the Collection menu, select App. downloads. A list of bookmarks is shown.

Select More bookmarks if you want to view the bookmarks available in the

Services menu. Select the bookmark of the browser page you want to access.

Follow the instructions provided by the service.

• Press Menu in standby mode and select Services to access a browser page from

which you can download the Java application that you want.

• Use the Game downloads function in the Games menu.

Important: Only install and use applications and other software from sources that

offer adequate security and protection against harmful software.

When downloading a game or an application, it may be saved in the Games menu

instead of in the Collection menu.

Checking the memory status

To check the amount of memory available for Java applications, select Memory in

the Collection menu.

■ Extras (Menu 8)

Calculator

Note: This calculator has limited accuracy and is designed for simple calculations.

Press Menu in standby mode, and select Extras and Calculator.

Making a calculation

1. Use

to insert a digit. Press

for a decimal point.

2. Press

once to add, twice to subtract, three times to multiply or four times

to divide.

3. For a result, press Options and select Equals.

4. Press and hold Clear for a new calculation.

Making a currency conversion

1. To save the exchange rate, press Options and select Exchange rate. Select

either of the available conversion options. Key in the exchange rate (press

for a decimal point) and press OK.

2. To make the conversion, key in the desired amount, press Options and select In

domestic or In foreign.

Tip: To make a currency conversion in standby mode, key in the amount,

press Options and select In domestic or In foreign.

Stopwatch

Press Menu, and select Extras and Stopwatch.

Select Split timing or Lap timing and press Start to start timing. To take the time,

press Stop. When the timing is stopped, you can press Options for Start, Save, or

Reset. If you select Start, timing continues from the previous stop time. Reset

stops the current timing and sets the time to zero.

To set the timing to continue in the background, press

running, appears in standby mode.

. While the time is

Using the stopwatch or allowing it to run in the background when using other features

increases the demand on battery power and reduces the battery life.

Countdown timer

Press Menu, select Extras and Countdown timer. Key in the alarm time and press

OK. You can also key in a note for the alarm, change the time and stop the timer.

When the timer is running,

is shown in standby mode.

When the alarm time is reached, the phone sounds a tone and flashes the related

text. Press any key to stop the alarm.

■ Services (Menu 9)

This menu contains a browser that you can use to access various

services (network service). These services may include, for example,

weather reports, news or flight times.

To access this menu: Press Menu in standby mode and select Services.

Check the availability, pricing and tariffs of these browser services with your

network operator and/or the service provider. They will also give you instructions

on how to use their services.

With your phone’s multi-mode browser you can view services that use Wireless

Mark-Up Language (WML) or extensible HyperText Markup Language (xHTML) on

their pages.

Important: Use only services that you trust and that offer adequate security and

protection against harmful software.

Basic steps for accessing and using browser services

1. Save the settings that are needed to access the service that you want to use.

See page 80.

2. Make a connection to the given service. See page 82.

3. Start browsing the pages of the service. See page 83.

4. Once you are finished browsing, end the connection to the service. See page

84.

Setting up the phone for a browser service

You may receive the service settings as an Over The Air (OTA) message from the

network operator or service provider that offers the service you want to use. You

can also key in the settings manually.

For more information and the appropriate settings, contact your network operator

or service provider that offers the service. The settings may be available, for

example, on their website.

Saving the service settings received as a message

• To save the received settings, press Options and select Save.

• To view or discard the received settings, press Options and select View or

Discard.

Keying in the service settings manually

1. In the Services menu, select Settings, Connection settings and Active service

settings.

2. Scroll to the connection set that you want to activate and press Activate. A

connection set is a collection of settings needed to make a connection to a

service.

3. Select Edit active service settings.

4. Select the settings one by one and key in all the required settings according to

the information that you have received from your network operator or service

provider.

Appearance settings

1. While browsing, press Options and select Other options and Appear. settings.

Or in the Services menu, select Settings and Appearance settings.

2. Select

•

Text wrapping to define whether the text continues on the next line if it

cannot be shown on one line.

•

Font size to select the size for text shown on browser pages.

Show images to show or hide the images on browser pages.

Cookie settings

You can set the phone to allow or prevent the receipt of cookies.

A cookie is a data item, for example your user information, that the service saves

in the cache memory of your phone. Cookies are deleted if you clear the cache

memory, see page 86.

1. While browsing, press Options and select Other options, Security and Cookie

settings. Or in the Services menu, select Settings, Security settings and

Cookies.

2. Select Allow or Reject.

Making a connection to a browser service

1. Activate the settings of the service that you want to use:

In the Services menu, select Settings and Connection settings. Select Active

service settings, scroll to the desired connection set and press Activate.

2. Make a connection in one of the following ways:

• Open the start page, for example the homepage of the service provider: In

the Services menu, select Home. OR: Press and hold

in standby mode.

• Select the bookmark of the service: In the Services menu, select Bookmarks

and the desired bookmark.

If the bookmark does not work with the current active service settings,

activate another set of service settings and try again.

• Key in the address of the service: In the Services menu, select Go to address,

key in the address (press

for special characters), and press OK.

Browsing the pages of a service

After you have made a connection to the service, you can start browsing its pages.

The functions of the phone keys may vary in different services. Follow the text

guides on the display.

If GPRS is selected as the data bearer, see GPRS connection on page 62 for the

GPRS indicators shown during the connection.

Using the phone keys while browsing

• Use the scroll keys to browse through the page.

• To select a highlighted item, press

• To key in letters and numbers, use the keys

character, press

Options while browsing

. To insert a special

Some of the following options may be available while browsing. Press Options

and select the desired option. The service provider may also offer other options.

The options are: Open, Shortcuts, Home, Add bookmark, Bookmarks (see page 84),

Download links, Save to folder, Other options, Reload, Quit (to end the connection,

see page 84).

Select

•

Home to return to the homepage of the service provider.

Shortcuts to open a new list of options that can be, for example, specific to the

page.

•

Add bookmark to save the current page as a bookmark.

•

Download links to view the list of bookmarks for downloading content. For

more information, see step 2 in Downloading content and applications on page

15.

Other options to view a list of other available options. These include Save

image, Use detail (to copy, for example, a phone number from the page), Go to

address, Service inbox (see page 85), Appear. settings (see page 81), Security

(for security information and cookie setting), Clear the cache (see page 86).

•

Reload to reload and update the current page.

Disconnecting from a browser service

To quit browsing and to end the connection, press Options, select Quit and, when

Quit browsing? is shown, press Yes. OR: Press and hold

A cache is a memory location that is used to store data temporarily. If you have tried to

access or have accessed confidential information requiring passwords, empty the cache

after each use. The information or services you have accessed is stored in the cache. To

empty the cache, see Emptying the cache memory on page 86.

Bookmarks

To use and manage the page addresses that you have saved as bookmarks in the

phone’s memory:

1. While browsing, press Options and select Bookmarks, or select Bookmarks in

the Services menu.

2. Scroll to the desired bookmark and press Options.

3. Select Go to to make a connection to the page associated with the bookmark.

You can also, for example, edit or delete the bookmark, send it to another

phone, save it in the desired folder or create a new bookmark.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does

not warrant or endorse these sites. If you choose to access them, you should take the same

precautions, for security or content, as you would with any Internet site.

Receiving a bookmark

When you receive a bookmark as an OTA message, press Options and select View

to view the bookmark or Save to add it to the bookmark list To discard a bookmark

received as an OTA message, press Exit.

Service inbox

The phone is able to receive service messages (’pushed messages’) from your

service provider (network service).

To set the phone to receive service messages: In the Services menu, select

Settings, Service inbox settings, Service messages, and On.

To set the phone to automatically fetch the content indicated in the service

message: In the Services menu, select Settings, Service inbox settings, Automatic

connection and On.

To view a service message:

1. Press Show to view the message immediately or press Exit to view it later in

Service inbox in the Services menu. OR: While browsing, press Options and

select Other options and Service inbox.

2. Scroll to the message you want and press Options. Select Retrieve to fetch the

content indicated in the message, Details to view the details of the service

message or Delete to delete the message.

Emptying the cache memory

In the Services menu, select Clear the cache. OR: While browsing, press Options

and select Other options and Clear the cache.

Browser security

Security features may be required for some services, such as banking services. For

such connections you need security certificates and possibly a security module

which may be available on your SIM card. For more information, contact your

service provider.

Security module

The security module can contain certificates as well as private and public keys. The

security module is to improve security services for functions requiring browser

connection, and allows you to use a digital signature. The certificates are saved in

the security module by the service provider.

In the Services menu, select Settings, Security settings and Security module

settings. Select

•

Security module details to view the security module’s title, status,

manufacturer and serial number.

•

Module PIN request and On to set the phone to ask for the module PIN when

using services provided by the security module.

Change module PIN to change the module PIN, if allowed by the security

module.

Certificates

The phone supports three kinds of certificates: server certificates, authority

certificates and user certificates. You may receive these certificates from a service

provider. Authority certificates and user certificates may also be saved in the

security module by the service provider. For details and availability, contact your

service provider.

When using a server certificate, the security indicator

is displayed during a

connection, if the data transmission between the phone and the gateway

(identified by the IP address in the Edit active service settings) is encrypted.

The security icon does not indicate that the data transmission between the gateway and the

content server (or place where the requested resource is stored) is secure. The service

provider secures the data transmission between the gateway and the content server.

Important: Even if the use of certificates makes the risks involved in remote

connections and software installation considerably smaller, they must be used

correctly in order to benefit from increased security. The existence of a certificate

does not offer any protection by itself; the certificate manager must contain

correct, authentic, or trusted certificates for increased security to be available.

Certificates have a restricted lifetime. If Expired certificate or Certificate not valid

yet is shown even if the certificate should be valid, check that the current date

and time in your device are correct.

Before changing any certificate settings, you must make sure that you really trust the owner

of the certificate and that the certificate really belongs to the listed owner.

■ Go to (Menu 10)

In this menu, you can activate the functions that can be accessed by

pressing Go to in standby mode.

To access this menu: Press Menu in standby mode and select Go to.

To remove functions from or add more functions to the list, see Personal shortcuts

on page 61.

■ SIM services (Menu 11)

For more information, contact your service provider.

6. Battery information

■ Charging and discharging

Your device is powered by a rechargeable battery. The full performance of a new battery is

achieved only after two or three complete charge and discharge cycles. The battery can be

charged and discharged hundreds of times, but it will eventually wear out. When the talk

and standby times are noticeably shorter than normal, replace the battery. Use only Nokia

approved batteries, and recharge your battery only with Nokia approved chargers

designated for this device.

If a replacement battery is being used for the first time or if the battery has not been used

for a prolonged period, it may be necessary to connect the charger then disconnect and

reconnect it to begin charging the battery.

Unplug the charger from the electrical plug and the device when not in use. Do not leave a

fully charged battery connected to a charger, since overcharging may shorten its lifetime. If

left unused, a fully charged battery will lose its charge over time.

If the battery is completely discharged, it may take a few minutes before the charging

indicator appears on the display or before any calls can be made.

Use the battery only for its intended purpose. Never use any charger or battery that is

damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic

object such as a coin, clip, or pen causes direct connection of the positive (+) and negative

(-) terminals of the battery. (These look like metal strips on the battery.) This might happen,

for example, when you carry a spare battery in your pocket or purse. Short-circuiting the

terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or winter

conditions, will reduce the capacity and lifetime of the battery. Always try to keep the

battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not

work temporarily, even when the battery is fully charged. Battery performance is particularly

limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also explode if

damaged. Dispose of batteries according to local regulations. Please recycle when possible.

Do not dispose as household waste.

■ Nokia battery authentication guidelines

Always use original Nokia batteries for your safety. To check that you are getting an original

Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original

Enhancements logo on the packaging, and inspect the hologram label using the following

steps:

Successful completion of the four steps is not a total assurance of the authenticity of the

battery. If you have any reason to believe that your battery is not an authentic original Nokia

battery, you should refrain from using it, and take it to the nearest authorized Nokia service

point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the

battery for authenticity. If authenticity cannot be verified, return the battery to the place of

purchase.

Authenticate hologram

1. When looking at the hologram on the label, you should see

the Nokia connecting hands symbol from one angle and the

Nokia Original Enhancements logo when looking from another

angle.

2. When you angle the hologram left, right, down, and up, you

should see 1, 2, 3, and 4 dots on each side respectively.

3. Scratch the side of the label to reveal a 20-digit code, for

example, 12345678919876543210. Turn the battery so that

the numbers are facing upwards. The 20-digit code reads

starting from the number at the top row followed by the

bottom row.

4. Confirm that the 20-digit code is valid by following the

instructions at www.nokia.com/batterycheck.

To create a text message enter the 20-digit code, for example, 12345678919876543210,

and send to +44 7786 200276.

National and international operator charges will apply.

You should receive a message indicating whether the code can be authenticated.

What if your battery is not authentic?

If you cannot confirm that your Nokia battery with the hologram on the label is an authentic

Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service

point or dealer for assistance. The use of a battery that is not approved by the manufacturer

may be dangerous and may result in poor performance and damage to your device and its

enhancements. It may also invalidate any approval or warranty applying to the device.

To find out more about original Nokia batteries, visit www.nokia.com/battery.

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated with

care. The suggestions below will help you protect your warranty coverage.

•

Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can

contain minerals that will corrode electronic circuits. If your device does get wet, remove

the battery, and allow the device to dry completely before replacing it.

•

Do not use or store the device in dusty, dirty areas. Its moving parts and electronic

components can be damaged.

Do not store the device in hot areas. High temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain plastics.

Do not store the device in cold areas. When the device returns to its normal temperature,

moisture can form inside the device and damage electronic circuit boards.

•

Do not attempt to open the device other than as instructed in this guide.

Do not drop, knock, or shake the device. Rough handling can break internal circuit boards

and fine mechanics.

•

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

Do not paint the device. Paint can clog the moving parts and prevent proper operation.

Use only the supplied or an approved replacement antenna. Unauthorized antennas,

modifications, or attachments could damage the device and may violate regulations

governing radio devices.

•

Use chargers indoors.

Always create a backup of data you want to keep, such as contacts and calendar notes,

before sending your device to a service facility.

All of the above suggestions apply equally to your device, battery, charger, or any

enhancement. If any device is not working properly, take it to the nearest authorized service

facility for service.

Additional safety information

Your device and its enhancements may contain small parts. Keep them out of the reach of

small children.

■ Operating environment

Remember to follow any special regulations in force in any area, and always switch off your

device when its use is prohibited or when it may cause interference or danger. Use the device

only in its normal operating positions. This device meets RF exposure guidelines when used

either in the normal use position against the ear or when positioned at least 1.5 centimeters

away from the body. When a carry case, belt clip or holder is used for body-worn operation,

it should not contain metal and should position the device the above-stated distance from

your body.

To transmit data files or messages, this device requires a quality connection to the network.

In some cases, transmission of data files or messages may be delayed until such a

connection is available. Ensure that the above separation distance instructions are followed

until the transmission is completed.

Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not

place credit cards or other magnetic storage media near the device, because information

stored on them may be erased.

■ Medical devices

Operation of any radio transmitting equipment, including wireless phones, may interfere

with the functionality of inadequately protected medical devices. Consult a physician or the

manufacturer of the medical device to determine if they are adequately shielded from

external RF energy or if you have any questions. Switch off your device in health care

facilities when any regulations posted in these areas instruct you to do so. Hospitals or

health care facilities may be using equipment that could be sensitive to external RF energy.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters

(6 inches) be maintained between a wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are consistent with the

independent research by and recommendations of Wireless Technology Research. Persons

with pacemakers should do the following:

•

Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker

Not carry the device in a breast pocket

Hold the device to the ear opposite the pacemaker to minimize the potential for

interference.

If you suspect interference, switch off your device, and move the device away.

Hearing aids

Some digital wireless devices may interfere with some hearing aids. If interference occurs,

consult your service provider.

■ Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in

motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock)

braking systems, electronic speed control systems, and air bag systems. For more

information, check with the manufacturer, or its representative, of your vehicle or any

equipment that has been added.

Only qualified personnel should service the device, or install the device in a vehicle. Faulty

installation or service may be dangerous and may invalidate any warranty that may apply to

the device. Check regularly that all wireless device equipment in your vehicle is mounted

and operating properly. Do not store or carry flammable liquids, gases, or explosive materials

in the same compartment as the device, its parts, or enhancements. For vehicles equipped

with an air bag, remember that air bags inflate with great force. Do not place objects,

including installed or portable wireless equipment in the area over the air bag or in the air

bag deployment area. If in-vehicle wireless equipment is improperly installed, and the air

bag inflates, serious injury could result.

Using your device while flying in aircraft is prohibited. Switch off your device before

boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the

operation of the aircraft, disrupt the wireless telephone network, and may be illegal.

■ Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere, and obey

all signs and instructions. Potentially explosive atmospheres include areas where you would

normally be advised to turn off your vehicle engine. Sparks in such areas could cause an

explosion or fire resulting in bodily injury or even death. Switch off the device at refueling

points such as near gas pumps at service stations. Observe restrictions on the use of radio

equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting

operations are in progress. Areas with a potentially explosive atmosphere are often, but not

always, clearly marked. They include below deck on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas

where the air contains chemicals or particles such as grain, dust, or metal powders.

■ Emergency calls

Important: Wireless phones, including this device, operate using radio signals,

wireless networks, landline networks, and user-programmed functions. Because

of this, connections in all conditions cannot be guaranteed. You should never rely

solely on any wireless device for essential communications like medical

emergencies.

To make an emergency call:

1. If the device is not on, switch it on. Check for adequate signal strength.

Some networks may require that a valid SIM card is properly inserted in the device.

2. Press

as many times as needed to clear the display and ready the device for calls.

3. Enter the official emergency number for your present location. Emergency numbers vary

by location.

4. Press

If certain features are in use, you may first need to turn those features off before you can

make an emergency call. Consult this guide or your service provider for more information.

When making an emergency call, give all the necessary information as accurately as

possible. Your wireless device may be the only means of communication at the scene of an

accident. Do not end the call until given permission to do so.

■ Certification information (SAR)

THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES

Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits

for exposure to radio waves recommended by international guidelines. These guidelines

were developed by the independent scientific organization ICNIRP and include safety

margins designed to assure the protection of all persons, regardless of age and health.

The exposure guidelines for mobile devices employ a unit of measurement known as the

Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/

kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using

standard operating positions with the device transmitting at its highest certified power level

in all tested frequency bands. The actual SAR level of an operating device can be below the

maximum value because the device is designed to use only the power required to reach the

network. That amount changes depending on a number of factors such as how close you are

to a network base station. The highest SAR value under the ICNIRP guidelines for use of the

device at the ear is 0.54 W/kg.

Use of device accessories and enhancements may result in different SAR values. SAR values

may vary depending on national reporting and testing requirements and the network band.

Additional SAR information may be provided under product information at www.nokia.com.

Miele Cooktop 371 G User Manual
National Instruments Network Card NI 9478 User Manual
Nilfisk Advance America Pressure Washer E 1302 User Manual
NordicTrack Home Gym NTL069073 User Manual
Olivetti Copier 120D User Manual
Omron Healthcare Blood Pressure Monitor HEM 630 User Manual
Onkyo Radio T 4555P User Manual
Optimus Portable CD Player CD 3840 User Manual
Oregon Clock Radio RM382P User Manual
Palm Network Card ETHERNET HUB User Manual