Philips Baby Monitor SC479 User Manual

SC479_book.qxd 06-07-2004 09:55 Pagina1  
baby monitor  
SBC SC479 DECT  
Instructions for use  
English 4  
Instructions pour l’utilisation  
Français 18  
Modo de empleo  
Español 32  
Bedienungsanleitung  
Deutsch 46  
Gebruiksaanwijzing  
Nederlands 60  
Istruzioni per l’uso  
Italiano 74  
Instruções de uso  
Português 88  
ꢀꢁꢂꢃꢄꢅꢆ ꢇꢈꢉꢊꢂꢆ  
ꢀꢁꢁꢂꢃꢄꢅꢆ 102  
Bruksanvisning  
Svenska 116  
Vejledning  
Dansk 130  
Bruksanvisning  
Norsk 144  
Käyttöohje  
Suomi 158  
 
SC479_book.qxd 06-07-2004 09:55 Pagina3  
3
1
2
3
#
@
4
5
^
%
!
0
6
7
8
9
$
A) Baby Unit  
§
&
*
(
)
¡
º
ª
£
B) Parent Unit  
 
SC479_book.qxd 06-07-2004 09:55 Pagina4  
4
ENGLISH  
Your baby monitor  
SBC SC479  
Philips is dedicated to producing caring, reliable products that new moms  
and dads really need. Products whose reliability and operating quality bring  
reassurance.You can trust this Philips baby monitor to provide round-the-  
clock support by ensuring you can always hear your baby clearly, no matter  
where you are in the house.The 100% Digital DECT 'cordless telephone  
technology' garantuees you hear only your own baby without any distracting  
noise.  
Philips Baby Care,Taking care together  
Important information  
Please read this guide carefully before using the baby monitor, and keep it  
for future reference.This baby monitor is intended as an aid. It is not a  
substitute for responsible and proper adult supervision and should not be  
used as such.  
• Make sure the Baby Unit and adapter cable are always out of reach of the  
baby, at least one metre away.  
• Never place the Baby Unit inside the baby ’s bed or playpen!  
• Never cover the baby monitor (with a towel, blanket, etc.).  
• Clean the baby monitor with a damp cloth.  
• Never use the baby monitor near water.  
Dispose of used batteries in an environmentally friendly manner.  
Safety precautions  
• Check if the voltage indicated on the type plate of the adapters  
correspond to the local mains voltage before connecting to the mains  
power supply.  
• Do not use the set in moist places or close to water.  
• Do not expose the set to extreme heat or light (eg. direct sunlight).  
To prevent electric shock, do not open the cabinets of the Baby Unit,  
Parent Unit and charger.  
• Avoid metallic contact (e.g. metal clips, keys) between the battery  
contacts and the contacts in the charging base.  
• Risk of explosion if battery is replaced by an incorrect type. Never use  
non-rechargeable batteries.  
• NiMH batteries must be disposed of in accordance with applicable waste  
disposal regulations.  
 
SC479_book.qxd 06-07-2004 09:55 Pagina5  
ENGLISH  
5
Environmental information  
No unnecessary packaging material has been used.We have tried to make  
the packaging easy to separate into two mono-materials cardboard (box),  
and polyethylene (bags, protective foam).  
Please observe the local regulations regarding the diposal of  
packing materials, exhausted batteries and old equipment.  
Contents  
Help line  
General  
2
4
Important information 4-5  
Functional overview 5-6  
Getting the baby monitor ready 7-9  
Monitoring your baby 9-10  
Explanation of features 10-14  
Problem solving 15  
Technical specifications 16  
Resetting to default factory settings 16-17  
Functional overview  
A)Baby Unit  
1 Page button  
pages the Parent Unit in case you need to locate it.  
2
3
Night light button (ɨ) switches on the nightlight.  
DECT SYSTEM LINK light  
Legend of product  
illustration on inside flap.  
lights orange:  
blinks red:  
unit switched on  
no connection for more than 30 seconds,  
the system check alarm on the Parent Unit beeps  
blinks green slowly: searching for connection  
blinks green fast:  
lights green:  
transmitting sound whenTALK button pressed  
connection OK  
4
5
Display informs you on the present status of the Baby Unit  
See also ‘C) Display’  
Night lights  
6 l button selects lullabies.  
7
8
9
ON/OFF button (A) switches the Baby Unit On and Off.  
Microphone (MIC)  
DC power supply socket  
10 9 / 2 button starts/stops playback of a lullaby.  
11 ; button interrupts playback of a lullaby.  
12 Loudspeaker  
13 VOLUME Up/Down buttons (  
adjust the Baby Unit volume.  
)
+
14 AC power adapter  
15 Battery compartment cover  
16 Room temperature sensor  
 
SC479_book.qxd 06-07-2004 09:55 Pagina6  
6
ENGLISH  
B)Parent Unit  
17 TALK button  
talks to your baby via the Baby Unit.  
18 Volume Up/Down buttons (  
)
+
adjust the Parent Unit volume.  
19 Display informs you on the present status of the Baby Unit  
See also ‘C) Display’  
20 MENU button  
opens and closes the Parent Unit menu.  
21 DECT SYSTEM LINK light  
lights orange:  
blinks red:  
unit switched on  
no connection for more than 30 seconds,  
the system check alarm on the Parent Unit beeps  
blinks green slowly: searching for connection  
blinks green fast:  
lights green:  
transmitting sound whenTALK button pressed  
connection OK  
22 Charging base  
23 Charging light  
24 Loudspeaker  
25 OK button  
– confirms actions in the menu.  
– interrupts/stops playback of a lullaby.  
26 ON/OFF button (A)  
switches the Parent Unit On and Off.  
27 Sound-level lights  
– indicate that sound is detected by the Baby Unit.  
– indicate the sensitivity level of the Baby Unit microphone.  
– indicate the volume level of both Baby Unit and Parent Unit  
loudspeaker.  
28 AC power adapter  
29 Battery compartment cover  
30 Belt clip  
C) Display  
Battery status  
Night lights on  
Lullaby playing  
26°  
Current room temperature  
Currently selected lullaby  
Lullaby 5  
Not linked  
No connection for more than 30 seconds  
Microphone sensitivity of Baby Unit is being set  
Set the minimum and maximum room temperature  
Room temperature exceeds set maximum  
Room temperature exceeds set minimum  
Room temperature < 7°C / > 33°C  
Range  
High  
Low  
(blinking)  
Only in Parent Unit menu mode.  
 
SC479_book.qxd 06-07-2004 09:55 Pagina7  
ENGLISH  
7
Getting the baby monitor ready  
Baby Unit  
For your convenience the Baby Unit can be mains or battery operated.  
Mains operated use  
Connect the AC power adapter (14) to a mains socket and the cord to  
the DC power supply socket (9) of the Baby Unit.  
>The Baby Unit is now ready for mains operated use.  
Battery operated use  
1 Remove the battery compartment cover (15).  
Turn the Battery Lock knob to the left (for this use a coin) and slide the  
cover downwards.  
2 Insert four 1.5V,AA size batteries noting the + and - configuration inside  
the battery compartment.  
(The batteries are not included; we recommend non-rechargeable Philips  
Alkaline batteries).  
+
+
+
+
+
+
+
+
+
+
+
3 Put the battery compartment cover back in place.  
Slide the cover upward until it clicks in position.  
+
+
Turn the Battery Lock knob to the right (for this use a coin).  
> The Baby Unit is now ready for battery operated use.  
The Baby Unit operates for a minimum of 25 hours on fresh batteries  
> When the battery indicator in the display (4) is empty (no blocks) and  
the display shows ‘Low Battery’, the battery power is low.The Baby Unit  
should now still operate for 15 minutes. After that you should install  
new batteries.  
Tips:  
Switch off the Baby night light to save battery power, when the Baby Unit is  
battery operated.  
Remove empty batteries from the Baby Unit.  
Battery back-up  
As soon as the batteries are inserted battery back-up will be activated.  
In case of mains failure during mains operated use, the unit will  
automatically switch to battery operated use.As soon as the mains supply  
is back on the unit switches to mains operated use again.  
 
SC479_book.qxd 06-07-2004 09:55 Pagina8  
8
ENGLISH  
Parent Unit  
1 Remove the battery compartment cover (29) by lifting the cover outward  
from the bottom.  
2 Insert the two enclosed AA rechargeable batteries, noting the + and -  
configuration inside the battery compartment.  
+
+
+
+
+
+
3 Put the battery compartment cover back in place.  
First slide the upperside of the cover into the recesses in the battery  
compartment.Then press the underside downwards until it clicks in  
position.  
4 Connect the AC power adapter (28) to a mains socket.  
5 Place the Parent Unit inside the charging base (22).  
> The red charging light (23) lights up.  
> The Parent Unit can be operated now, but you should leave it in the  
charging base until the batteries are fully charged (at least 16 hours).  
When the batteries are fully charged, the Parent Unit can be taken out  
of the charging base and used cordlessly for up to 16 hours.  
> When the battery indicator in the display (19) is empty (no blocks),  
the display shows ‘Low Battery’ and the ‘low battery alert’ sounds every  
60 seconds the battery power is low. Place the Parent Unit inside the  
charging base to recharge the batteries.  
> If the rechargeable batteries begin to lose their effectiveness, replace  
them with two new rechargeable batteries.  
Notes:  
Use rechargeable batteries only!  
Never operate the Parent Unit with other types of batteries!  
The ‘low battery alert’ can be switched off by pressing any button on the  
Parent Unit.  
Never operate the Parent Unit on the charging base without the proper  
batteries!  
Disposal of batteries  
Dispose of used batteries in an environmentally friendly manner.  
Do not mix old and new batteries, or different types of batteries.  
Remove Baby Unit batteries if the baby monitor is not to be used for  
long periods.  
 
SC479_book.qxd 06-07-2004 09:55 Pagina9  
ENGLISH  
9
Beltclip  
Connecting to the Parent Unit  
1 Slide the wider side of the clip into the small rectangular recess on the  
back of the Parent Unit.  
Make sure the pins on the underside are above the circular recess.  
2 Press the clip downwards until it clicks in position.  
Disconnecting from the Parent Unit  
Press the visible pin in the circular recess upwards and lift the clip  
outwards.  
Monitoring your baby  
Switching on the units  
1 Position the Baby Unit at least one metre away from your baby.  
Never place the Baby Unit inside the baby ’s bed or playpen.  
2 Press and hold the A button (7) on the Baby Unit to switch on the Baby  
Unit.  
3 Press and hold the A button (26) on the Parent Unit to switch on the  
Parent Unit.  
> Both displays light up and indicate the current room temperature.  
> All lights light up for 2 seconds and then turn off again.  
> The DECT SYSTEM LINK lights (3 and 21) of both units light up orange  
then start blinking (green).The units now search for connection.  
> The DECT SYSTEM LINK lights (3 and 21) of both units light  
continuously (green) when the units have established connection.  
You can now monitor your baby.  
To switch off the units again press and hold the A buttons (7 and 26).  
> The units will beep when they are switched off.  
Note:The Parent Unit beeps when it is (accidentally) switched off while  
monitoring.  
 
SC479_book.qxd 06-07-2004 09:55 Pagina10  
10 ENGLISH  
Adjusting loudspeaker volume  
Use the  
buttons (18) on the Parent Unit to increase/decrease the  
+
loudspeaker volume of the Parent Unit.  
+
Use the  
buttons (13) on the Baby Unit to increase/decrease the  
loudspeaker volume of the Baby Unit.  
> The displays give visual feedback on the volume settings on the units:  
Volume Off = Parent Unit volume switched off/monitoring baby silently;  
Volume 9= minimum;  
Volume 99999= maximum.  
Notes:  
The volume of the Parent Unit can be switched off (‘Volume Off).  
The volume of the Baby Unit cannot be switched off.  
A high pitched noise may occur in case the units are too close to each other.  
To avoid this you should switch the Parent Unit volume off before placing the  
units close to each other.  
You can only change the Baby Unit volume if the connection between the  
Baby Unit and Parent Unit is established.  
The microphone sensitivity of the Baby Unit can be adjusted in the Parent Unit  
menu. See ‘Parent Unit menu operation’ and ‘Menu options’.  
Talking back to comfort your baby  
1 On the Parent Unit, press and hold the TALK button (17) until the DECT  
SYSTEM LINK lights (3 and 21) of both units blink (green). Then talk  
clearly into the loudspeaker grill.  
> While theTALK button on the Parent Unit is being pressed, no sounds  
from the Baby Unit can be heard on the loudspeaker of the Parent Unit.  
2 Release the TALK button when finished or when you wish to hear your  
baby again.  
Explanation of features  
Monitoring baby silently  
+
• Use the  
buttons (18) to switch off the Parent Unit volume  
(‘Volume Off).  
> The sound-level lights (27) visually alert you to baby’s sounds.  
The more sound your baby makes, the more lights light.  
> When no sound is detected, all lights will be off.  
> If the volume of the Parent Unit is set to Off, the Parent Unit will beep  
as soon as the second sound-level-light (25) lights red.  
For this ‘Sound Alert’ has to be activated in the Parent Unit menu.  
See ‘Parent Unit menu operation’ and ‘Menu options’.  
 
SC479_book.qxd 06-07-2004 09:55 Pagina11  
ENGLISH 11  
Checking that the units have established a  
connection  
• Check that the DECT SYSTEM LINK light (21) on the Parent Unit lights  
continuously (green) to confirm that the connection between both units  
is reliable.  
> The DECT SYSTEM LINK light blinks green when the units lost  
connection with each other. If connection is not established within  
30 seconds, DECT SYSTEM LINK light blinks red, the displays show  
‘Not Linked’ and the system check alarm on the Parent Unit beeps every  
30 seconds.This beeping can be suppressed for 3 minutes by pressing  
any button on one of the units.  
Switching the night lights on and off  
• Press the ɨ button (2) on the Baby Unit to switch on the night lights.  
• Press the ɨ button again to switch off the night lights.  
> The nightlights dim and gradually switches off.  
Notes:  
Switch off the night lights when operating the Baby Unit on batteries to  
conserve power.  
The nightlights can also be switched on and off via the Parent Unit menu.  
For this see ‘Parent Unit menu operation’ and ‘Menu options’.  
Paging the Parent Unit  
If the Parent Unit is misplaced and the volume is switched off, you can use  
the Page button on the Baby Unit to locate the Parent Unit.  
Press the page button (1) on the Baby Unit.  
> The Parent Unit will automatically reset to medium volume level and  
paging alert will sound.  
To stop the paging alert, press the Page button again or any button on  
the Parent Unit.  
 
SC479_book.qxd 06-07-2004 09:55 Pagina12  
12 ENGLISH  
Playing lullabies  
1 Press the l button (6) on the Baby Unit repeatedly to select one out of  
five available lullabies.  
2 Press the 9 / 2 button (10) to play the selected lullaby.  
>
l and the name of the lullaby appear on both Parent Unit and Baby  
Unit display.The lullaby will be played repeatedly for five minutes.  
> If you select ‘Play All’, all lullabies will be played one after another  
repeatedly for five minutes. Each lullaby lasts for about 30 seconds.  
3 Press the 9 / 2 button (10) again to stop playback.  
Notes:  
Lullabies can also be selected and played via the Parent Unit menu.  
For this see ‘Parent Unit menu operation’ and ‘Menu options’.  
You can also stop playback by pressing the OK button (25) on the Parent  
Unit.  
Interrupting playback  
1 Press the ; button (11) on the Baby Unit to interrupt playback.  
> ‘Paused’ lights up on both displays and l starts blinking.  
2 Press the ; button (11) again to restart playback.  
Notes:  
You can also interrupt and restart playback by pressing the button (25)  
on the Parent Unit.  
If playback is not restarted within 60 seconds, the ‘Lullaby’ function will  
switch off automatically.  
Parent Unit menu operation  
Most SC479 functions can be operated either using the keys on the units or  
via the Parent Unit menu. Some functions, however can only be operated  
via the Parent Unit menu. In this chapter we will describe how to operate  
the SC479 via the menu. In the next chapter will give an overview and  
explanation of menu options.  
1 Press the MENU button (20) on the Parent Unit to acces the menu.  
> The first menu option appears on the display.  
+
2 Use the  
buttons (18) to select the desired menu option.  
 
SC479_book.qxd 06-07-2004 09:55 Pagina13  
ENGLISH 13  
3 Press the OK button (25) to confirm your selection.  
+
4 Use the  
buttons (18) to make adjustments and selections and press  
the OK button (25) to confirm.  
> In some cases ‘Saved’ appears on the display to confirm that an  
adjustment has boon stored.  
5 Press the MENU button (20) again to exit the menu.  
Menu options  
The options ‘Nightlight’ and ‘Lullaby’ can be operated via the keys on the  
sets as well as via the menu.The other options can only be operated via the  
menu.  
Nightlight  
Confirm ‘Light On?’ or ‘Light Off?’ to switch the nightlights on or off.  
Lullaby  
Confirm ‘Play?’ to replay the last played lullaby or ‘Stop Lullaby?’ to stop  
playback.  
Sensitivity  
Select the desired sensitivity level for the Baby Unit microphone:  
‘Sensitivity 9‘ = minimum level / lowest sensitivity;  
‘Sensitivity 9 9 9 9 9‘ = maximum level (continuous transmission) /  
highest sensitivity.  
When set to maximum level (continuous transmission), the Baby Unit  
monitors continuously and all sounds, regardless of level, can be heard on  
the Parent Unit. Battery operating time may decrease to approximately  
12 hours during continuous transmission.  
You can only change the Baby Unit microphone sensitivity if the connection  
between the Baby Unit and Parent Unit is established.  
Sound Alert  
Confirm ‘Alert On?’ or ‘Alert ‘Off. If Sound Alert is switched on, the Parent  
Unit beeps as soon as the second sound-level-light (25) lights red while the  
volume is switched off.  
Temperature  
Set a minimum and a maximum room temperature (‘Range’) which you  
think are convenient for your baby. Minimum temperature can be set  
between 10 °C and 19 °C; maximum temperature can be set between  
22 °C and 30 °C. If the actual room temperature exceeds the set minimum  
or maximum temperature, the ‘Low’ or ‘High’ indication appears on the  
display and the actual temperature starts blinking. If the room temperature  
drops below 7 °C or rises above 33 °C,– –’ starts blinking on the display.  
 
SC479_book.qxd 06-07-2004 09:55 Pagina14  
14 ENGLISH  
Temperature Alert  
Temperature alert will sound from the Parent Unit if the actual room  
temperature exceeds the set minimum or maximum temperature or if the  
room temperature drops below 7 °C or rises above 33 °C.To set the alert:  
Select ‘Temperature’ in the menu.When ‘Range’ appears on the display, press  
+
the  
button (18), select ‘Alert On’ or ‘Offand confirm by pressing the OK  
button (25).  
Operating range  
• The SBC SC479 baby monitor has an open air operating range of up to  
300 metres.Walls, ceilings, large objects and even glass will decrease the  
operating range. Depending on your local circumstances the operating  
range can decrease down to approximately 50 metres.The system check  
function (lights 3, 21 and beeping sound on the Parent unit) will in  
principle indicate to you the reliability of the connection between the  
Parent unit and Baby unit and whether you are out of range.  
 
SC479_book.qxd 06-07-2004 09:55 Pagina15  
ENGLISH 15  
Problem solving  
If a fault occurs, first check the points listed below. If you are unable to  
remedy a problem by following these hints, contact the helpline or consult  
your dealer.  
Under no circumstances should you try to repair the set yourself as this will  
invalidate the guarantee.  
Problem  
Possible cause  
Solution  
DECT SYSTEM  
LINK light does  
not light  
Parent Unit: unit is not turned on.  
Baby Unit: unit is not turned on.  
Batteries are low.  
Press the A button (26).  
Press the A button (7)  
Replace/recharge batteries.  
Power adapter is not plugged in or  
batteries are exhausted.  
Plug in power adapter or replace batteries.  
Rechargeable batteries not inserted  
into Parent Unit.  
Place rechargeable batteries.  
High pitched noise  
Units are too close to each other.  
Volume too high.  
Move Parent Unit away from Baby Unit.  
Decrease the Parent Unit volume.  
Parent Unit  
batteries do not  
charge  
Battery life is at an end.  
Replace rechargeable batteries,  
using only NiMH rechargeable batteries.  
Fit battery in correct polarity position.  
Clean Charger contact with soft dry cloth.  
Battery polarity misfitted.  
Poor contact between Unit and  
Charger.  
No sound  
Volume on Parent Unit is set too low.  
Increase Parent Unit volume.  
Sensitivity setting on Parent Unit too low. Adjust sensitivity level of Parent Unit.  
Units are out of range.  
Move Parent Unit closer to Baby Unit.  
Battery check light  
lights (Baby Unit) or  
blinks (Parent Unit)  
Batteries are low or empty.  
Parent Unit:  
Baby Unit:  
Recharge or replace batteries.  
Replace or remove battery.  
DECT SYSTEM  
LINK light (flashing  
red)/ System check  
alarm beeps on  
Parent Unit  
Units too far away from each other.  
Batteries are low.  
Units cannot establish a connection,  
even when close to each other.  
Decrease distance between units.  
Replace/recharge batteries.  
Try solving the problem by using the factory  
initialisation mode. For this see chapter  
‘Factory Initialisation mode’.  
No power to one of both units.  
Check A button (26) on Parent Unit  
and A button (7) on Baby Unit.  
 
SC479_book.qxd 06-07-2004 09:55 Pagina16  
16 ENGLISH  
Technical specifications  
Power supply:  
– 2x AA rechargeable batteries (1.5V, NiMH,  
1600mAH) for Parent Unit (included)  
– Optional batteries 4x 1.5V;AA for Baby Unit  
(not included)  
– AC power adapter 230V AC, 50 Hz.  
Only use the 9 Volt DC/ 300 mA AC power  
adapter included.  
Operating temperature: 0 °C to 40 °C  
Standard:  
Digital Enhanced Cordless  
Telecommunications (DECT)  
Resetting to default factory settings  
Factory Initialisation mode  
With this mode both units can be reset to the default factory settings.  
Factory Initialisation can be used if problems occur which can not be solved  
by following the suggestions in chapter ‘Problem solving’. Resetting must be  
done separately for each unit.  
1 Press and hold the A button (7 and 26) to switch on the unit.  
 
SC479_book.qxd 06-07-2004 09:55 Pagina17  
ENGLISH 17  
2 When the lights on the unit light up, immediately press and hold the  
volume down button ( - 13 and - 18).  
> The unit has now been reset to the default factory settings.  
Note: By executing the factory initialisation mode Parent Volume, Baby Volume  
and Baby Sensitivity are automatically reset to their factory default  
settings. Personal preferences need to be set again.  
Factory default settings are:  
– Parent Unit Volume: level 1 (Volume 9)  
– Baby Unit Volume: level 3 (Volume 999)  
– Baby Unit Sensitivity: level 5 (Sensitivity 99999)  
Need Help?  
In case you have any questions about the SBC SC479, please contact our  
helpline for assistance!You can find the number in the list on page 2.  
Before you call, please read this manual carefully.  
You will be able to solve most of your problems.  
The model number of the baby monitor is SBC SC479.  
Date of purchase:  
_____  
day  
/_____ /______  
/month /year  
 
SC479_book.qxd 06-07-2004 09:57 Pagina174  
Guarantuee certificate  
Garantiebewijs  
Certificado de garantia  
Garantibevis  
Certificat de garantie  
Certificado de garantia  
ꢀꢊꢊ(ꢂꢋꢂ  
Garantieschein  
Certificato di garanzia  
Garanticertifikat  
Takuutodistus  
Garantibevis  
year warranty  
année garantie  
Jahr Garantie  
jaar garantie  
año garantia  
anno garanzia  
ꢇꢈꢋꢌꢊꢆ ꢅꢃꢃ%ꢂꢊꢂ  
år garanti  
år garanti  
år garanti  
vuosi takuu  
año garantia  
1
Type:  
SBC SC479  
Serial nr:_____________________________________________________________  
Date of purchase - Date de la vente -Verkaufsdatum - Aankoopdatum - Fecha de compra - Date d’acquisito -  
Data da adquirição - G#ꢅꢈꢍ#ꢂꢌꢄꢎ ꢎꢃꢍꢈꢖꢆ - Inköpsdatum - Anskaffelsesdato - Kjøpedato - Oatopäivä -  
Dealer’s name, address and signature  
ꢀꢌꢍ#ꢎꢏꢅꢐꢑꢌ#ꢍ, ꢁꢒꢅ%$ꢓꢌꢊꢂ ꢔꢎꢒ ꢓꢐꢍꢃꢈꢎꢕꢉ ꢏꢍꢓ ꢅ#ꢐ. ꢐꢈꢍ#ꢂ$ꢅꢓꢏꢂ  
Återförsäljarens namn, adress och signatur  
Forhandlerens navn, adresse og unterskrift  
Forhandlerens navn, adresse og unterskrift  
Jälleenmyyjän nimi, osoite ja allekirjoitus  
Nom, adresse et signature du revendeur  
Name,Anschrift und Unterschrift des Händlers  
Naam, adres en handtekening v.d. handelaar  
Nombre, direccion y firma del distribudor  
Nome, indirizzo e firma del fornitore  
Nome, morada e assinature da loja  
6 month guarantee on rechargeable batteries  
6 mois de garantie sur les piles rechargeables  
6 meses de garantía para las pilas recargables  
6 Monate Garantie auf wiederaufladbare Batterien  
6 maanden garantie op oplaadbare batterijen  
Garanzia di 6 mesi sulle batterie ricaricabili  
Pilhas recarregáveis com 6 meses de garantia  
Eꢃꢃ%ꢂꢊꢂ 6 #ꢂꢌꢑꢌ ꢊꢅ ꢅꢐꢎꢌꢎꢕꢍꢈꢏꢒꢗꢋ#ꢅꢌꢅꢆ #ꢐꢎꢏꢎꢈꢄꢅꢆ  
6 månaders garanti på laddningsbara batterier  
6 måneders garanti på genopladelige batterier  
6 måneders garanti på de oppladbare batteriene  
Ladattavilla akuilla on 6 kuukauden takuu  
This document is printed on chlorine free produced paper  
Data subject to change without notice  
Printed in China  
0682  
 

Patton electronic Telephone 4050 Series User Manual
Peavey Music Mixer 684 User Manual
Pelco Projector Accessories C2224M B User Manual
Pelco Security Camera C458M B User Manual
Philips TV DVD Combo 14PT610 User Manual
Philips Ventilation Hood SCD510 User Manual
Philips Washer 12NC User Manual
Pioneer Flat Panel Television PDP 425CMX User Manual
Polycom Cordless Telephone 1725 36024 001 User Manual
ProForm Treadmill PFTL79102 User Manual