Philips DVD Player DVD633 User Manual

DVDVideo Player  
DVD633  
 
Index  
English ------------------------------------------------- 5  
Français ---------------------------------------------- 27  
Deutsch --------------------------------------------- 49  
Nederlands ----------------------------------------- 71  
CAUTION  
VISIBLE AND INVISIBLE LASER RADIATION  
WHEN OPEN AVOID EXPOSURETO BEAM  
ADVARSEL  
SYNLIG OG USYNLIG LASERSTRÅLINGVED  
ÅBNING UNDGÅ UDSÆTTELSE FOR  
STRÅLING  
VARNING  
SYNLIG OCH OSYNLIG LASERSTRÅLNING  
NÄR DENNA DEL ÄR ÖPPNAD BETRAKTA  
EJ STRÅLEN  
VARO!  
AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA  
NÄKYMÄTTÖMÄLLE LASER SÄTEILYLLE. ÄLÄ  
KATSO SÄTEESEEN  
VORSICHT  
SICHTBARE UND UNSICHTBARE  
LASERSTRAHLUNG WENN ABDECKUNG  
GEÖFFNET NICHT DEM STRAHL  
AUSSETSEN  
ATTENTION  
RAYONNEMENT LASERVISIBLE ET INVISIBLE  
EN CAS DOUVERTURE EXPOSITION  
DANGEREUSE AU FAISCEAU  
3
 
General Information  
The region code for this set is 2.  
Laser safety  
Since it is usual for DVD movies to be released  
at different times in different regions of the  
world, all players have region codes and discs can  
have an optional region code. If you load a disc  
of a different region code to your player, you will  
see the region code notice on the screen.The  
disc will not play, and should be unloaded.  
This unit employs a laser. Due to possible eye  
injury, only a qualified service person should  
remove the cover or attempt to service this  
device.  
USE OF CONTROLS,ADJUSTMENTS  
OR PERFORMANCE OF PROCEDURES  
OTHERTHANTHOSE SPECIFIED  
HEREIN MAY RESULT IN  
HAZARDOUS RADIATION  
EXPOSURE.  
2
NOTE:  
Manufactured under license from Dolby  
Laboratories. “Dolby”, “Pro Logic” and the  
double-D symbol are trademarks of Dolby  
Laboratories.  
PICTURES SHOWN MAY BE  
DIFFERENT BETWEEN COUNTRIES.  
This product incorporates copyright protection  
technology that is protected by method claims of  
certain U.S. patents and other intellectual  
property rights owned by Macrovision  
Corporation and other rights owners. Use of this  
copyright protection technology must be  
authorised by Macrovision Corporation, and is  
intended for home and other limited viewing  
uses only unless otherwise authorised by  
Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
LASER  
Type  
Wave length  
Semiconductor laser GaAlAs  
650 nm (DVD)  
780 nm (VCD/CD)  
7 mW (DVD)  
10 mW (VCD/CD)  
Output Power  
Beam divergence  
60 degree  
CAUTION  
(WARNING LOCATION: ONTHE  
BACKPLATE OF SET)  
TruSurround and the  
symbol are  
trademarks of SRS Labs, Inc.TruSurround  
technology is incorporated under license from  
SRS Labs, Inc.  
NEVER MAKE OR CHANGE  
CONNECTIONSWITHTHE POWER  
SWITCHED ON.  
The DVDVIDEO player is in  
conformity with the EMC directive and  
low-voltage directive.  
For Customer Use:  
Read carefully the information located at the  
bottom of your DVDVIDEO player and enter  
below the Serial No.Retain this information for  
future reference.  
Model No. DVDVIDEO  
Serial No. __________________________  
4
 
Contents  
Introduction  
Access Control  
Environmental Information ------------------------ 6  
Supplied accessories -------------------------------- 6  
Safety Information ----------------------------------- 6  
Symbols Used in this Manual ---------------------- 6  
Access Control: Child Lock---------------------- 23  
Access Control: Parental Control ---------- 23-24  
Specifications  
Specifications --------------------------------------- 25  
Functional Overview  
Front and Rear Panels ------------------------------ 7  
Remote Control ------------------------------------- 8  
Maintenance  
Maintenance ---------------------------------------- 25  
Preparation  
Troubleshooting  
Basic Connections ----------------------------------- 9  
Connecting to aTV---------------------------------- 9  
Connecting to an Audio System ------------------ 9  
Connecting to Optional Equipment ------------ 10  
Inserting batteries into the Remote Control - 10  
NTSC/PAL Conversion --------------------------- 11  
Switching On --------------------------------------- 11  
Menu Bars onTV Screen ------------------------- 11  
Personal Preferences -------------------------- 12-14  
Troubleshooting------------------------------------ 26  
Operation  
Basic Playback -------------------------------------- 15  
Playing a DVD-Video ------------------------------ 15  
Playing aVideo CD -------------------------------- 16  
Playing an Audio CD ------------------------------ 16  
Special DVD Features ----------------------------- 17  
SpecialVCD & SVCD Features ------------------ 17  
General Features ------------------------------ 18-21  
MP3 Disc Features -------------------------------- 22  
5
 
Introduction  
G
In cabinet, allow about 2.5cm (1 inch) of free  
space all around the player for adequate  
ventilation.  
Do not expose your player to extreme of  
temperature or humidity.  
If the DVD player is brought directly from a cold  
to a warm location, or is placed in a very damp  
room, moisture may condense on the lens of the  
disc unit inside the DVD player. Should this occur,  
the DVD player would not operate normally.  
Leave the power on for about one hour with no  
disc in the DVD player until normal playback is  
possible.  
The mechanical parts of the set contain self-  
lubricating bearings and must not be oiled or  
lubricated.  
When the DVD player is switched to  
Standby mode, it is still consuming some  
power. To disconnect the system from  
the power supply completely, remove the  
AC power plug from the wall socket.  
Thank you for purchasing this Philips DVD player.  
This Owners Manual explains the basic  
operation of this DVD player.  
G
G
Environmental Information  
All unnecessary packaging has been omitted.  
Packaging has been made easy to separate into  
three materials: cardboard (box), polystyrene  
foam (buffer) and polyethylene (bags, protective  
foam sheet).  
Your DVD player consists of materials which can  
be recycled and reused if disassembled by a  
specialised company. Please observe the local  
regulations regarding the disposal of packaging  
materials, exhausted batteries and old  
equipment.  
G
G
Supplied accessories  
Remote control  
Batteries (two AA size) for remote control  
Audio cable  
SCART cable (not available for all versions)  
Owners Manual  
Symbols Used in this Manual  
The below symbols appear in some headings  
and notes with the following meanings:  
Safety Information  
DVD  
Description refers to playback of DVD-video discs  
G
Before operating the DVD player, check that the  
operating voltage indicated on the typeplate (or  
the voltage indication beside the voltage  
selector) is identical with the voltage of your  
local power supply. If not, please consult your  
dealer.  
VCD  
CD  
Description refers to playback ofVideo CDs  
Description refers to playback of Audio CDs  
Helpful Hints!  
Some DVD video discs require specific  
functions or allow only limited functions  
during playback.  
G
G
Place the DVD player on a flat, hard and stable  
surface.  
There must be sufficient room in front of the  
player for the disc tray to be opened.  
G
G
Ä“ may appears on theTV screen  
which means that the function is not  
available on that specific DVD video disc.  
6
 
Functional Overview  
Front and Rear Panels  
B; PLAY/PAUSE  
to start/interrupt playback  
STANDBY-ON  
9 STOP  
to switch the player to standby mode or  
to stop playback  
ON  
/ OPEN/CLOSE  
Disc Tray  
to open/close the disc tray  
DVD633 DVD VIDEO PLAYER  
OPEN/CLOSE STOP PLAY/PAUSE  
STANDBY-ON  
MAINS (AC Power Cord)  
connect to a standard AC outlet  
COAXIAL (Digital audio out)  
connect to AUDIO inputs of a digital  
(coaxial) audio equipment  
CVBS VIDEO OUT  
connect to CVBS Video inputs of a TV  
TV OUT VIDEO OUT  
connect to a TV with SCART  
AUDIO OUT (Left/Right)  
connect to AUDIO inputs of an  
amplifier, receiver or stereo system  
DIGITAL AUDIO OUT  
PCM-MPEG2-Dolby Digital  
R
L
(CVBS)  
TV OUT  
COAXIAL  
AUDIO OUT  
VIDEO OUT  
Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic  
discharge may cause permanent damage to the unit.  
7
 
Functional Overview  
Remote Control  
RETURN / RESUME  
go back to previous menu / to  
continue playback after play  
was stopped  
POWER B  
switch DVD ON or go to  
standby-on mode  
0-9 numerical key pad  
select numbered items in a  
menu  
DISC MENU  
access menu of a DVD disc  
1 2 3 4  
(left/right/up/down) select an  
item in the menu  
DISPLAY  
display bit rate indicator during  
playback  
OK  
SYSTEM MENU  
access or remove players  
system menu  
acknowledge menu selection  
S
search backward* / go to a  
previous chapter or track  
T
search forward* / next chapter  
or track  
STOP ( 9 )  
stop playback  
SUBTITLE  
subtitle language selector  
PLAY ( B )  
start playback  
ANGLE  
select DVD camera angle  
PAUSE ( ; )  
pause playback temporarily /  
frame-by-frame playback  
ZOOM  
enlarge video image  
REPEAT  
AUDIO  
repeat chapter, track, title, disc  
audio language selector  
REPEAT (A-B)  
repeat a specific segment  
SHUFFLE  
play tracks in random order  
SCAN  
play the first 10 seconds of each  
track/chapter within a disc  
* Press and hold key for about two seconds  
8
 
Preparation  
If yourTV has a CVBSVideo input  
connector,  
Basic Connections  
G
G
Please refer to the instruction books of yourTV,  
VCR, Stereo System or other devices as  
necessary to make the best connections.  
Make one of the following connections,  
depending on the capabilities of your existing  
equipment.  
1
2
Connect the CVBS VIDEO OUT on the DVD  
player to the CVBS VIDEO IN on theTV.  
Connect the Left and Right AUDIO OUT on the  
DVD player to the Left and Right AUDIO IN on  
theTV.  
The following guidelines are options for the best  
picture and sound quality available on your DVD  
player.  
TO TV  
VCR  
Picture  
1
2
Use the CVBSVideo Ouput for good picture  
quality.  
Use SCART Output for best picture quality.  
OR  
TO SCART IN  
TO VIDEO IN  
TO AUDIO IN  
Sound  
1
2
Digital audio connections provide the clearest  
sound. Connect the DVD players DIGITAL  
AUDIO OUT (COAXIAL) to your amplifier or  
receiver.  
If digital connections are not possible, connect  
the DVD players red and white AUDIO OUT to  
your amplifier, receiver, stereo orTV.  
DIGITAL AUDIO OUT  
PCM-MPEG2-Dolby Digital  
R
L
(CVBS)  
TV OUT  
COAXIAL  
AUDIO OUT VIDEO OUT  
Connecting to an Audio System  
1
2
You can also listen to the sound of audio CDs  
and DVD video discs by connecting to an  
optional stereo system.  
Connect the Left and Right AUDIO OUT on the  
DVD player to the Left and Right AUDIO IN on  
the stereo system.  
Warning!  
Never make or change connections  
with the power switched on.  
Connect the DVD player directly to  
yourTV, instead of eg. aVCR, to avoid  
distortion because DVD video discs are  
copy protected.  
Do not connect the DVD player AUDIO  
OUT to PHONO IN of your amplifier or  
receiver.  
AUDIO SYSTEM  
Connecting to aTV  
1
Connect the SCART (TV OUT) to the  
corresponding connector on theTV IN.  
TO SCART IN  
TO VIDEO IN  
OR  
TO AUDIO IN  
Note:  
Ensure that the “TV” indication on SCART  
DIGITAL AUDIO OUT  
PCM-MPEG2-Dolby Digital  
cable is connected to theTV set and “DVD”  
indication on SCART cable is connected to the  
DVD player.  
R
L
(CVBS)  
TV OUT  
COAXIAL  
AUDIO OUT VIDEO OUT  
If yourTV is not equipped with a SCART input,  
you can select the following connection:  
9
 
Preparation  
Connecting to Optional  
Equipment  
Inserting batteries into the  
Remote Control  
G
G
A digital component with a built-in MPEG 2 or  
Dolby Digitaldecoder allows you to enjoy the  
surround sound while producing the effect of  
being in a movie theater or a concert hall.  
The player outputs the surround sound signals  
from the DIGITAL OUT COAXIAL connectors.  
1
2
Open the battery cover.  
Insert batteries (AA size) with the correct  
polarity as indicated by the + and - symbols  
inside the battery compartment.  
Close the cover.  
3
If your receiver has a MPEG 2 or Dolby  
Digitaldecoder,  
-
+
1
2
Connect the COAXIAL DIGITAL AUDIO OUT  
of the DVD player to the COAXIAL DIGITAL  
AUDIO IN on your receiver.  
You will need to set the DVD players digital  
output to ALL (see Personal Preferences).  
+
-
CAUTION!  
Remove batteries if they are exhausted  
or not to be used for a long time.  
Do not use old and new or different  
types of batteries in combination.  
Batteries contain chemical substances,  
REAR  
SPEAKERS  
so they should be disposed off properly  
and kept away from children.  
REAR  
SPEAKERS  
RECEIVER with  
MPEG 2 or Dolby  
Digital™ decoder  
Using the Remote Control  
G
Direct the remote control at the remote sensor  
of the DVD player.  
TO SCART IN  
OR  
TO VIDEO IN  
TO COAXIAL IN  
G
G
Do not drop the remote control.  
Do not leave the remote control near extremely  
hot or humid place.  
DIGITAL AUDIO OUT  
PCM-MPEG2-Dolby Digital  
R
L
(CVBS)  
G
Do not spill water or put anything wet on the  
remote control.  
TV OUT  
COAXIAL  
AUDIO OUT VIDEO OUT  
Notes:  
If the audio format of the digital output does  
not match the capabilities of your receiver, the  
receiver will produce a strong, distorted sound or  
no sound at all.  
To see the selected audio format of the  
current DVD in the StatusWindow, press SYSTEM  
MENU.  
MP3 Audio is not available on the Digital  
Output.  
10  
 
Preparation  
Menu bar 1  
NTSC/PAL Conversion  
This player is equipped with an NTSC/PAL  
conversion feature that converts the video  
output of the disc to match yourTV system. To  
activate the conversion refer to page 13.  
From the left,  
Personal Preferences Subtitle Language ➜  
Audio Language Colour Sound  
Switching On  
Menu bar 2  
1
2
Switch on theTV and DVD player.  
Set theTV to the correctVideo IN channel. (eg.  
EXT1, EXT2,AV1,AV2,AUDIO/VIDEO, etc.  
(Refer to yourTV owners manual for detail)  
The player display lights up and the default  
screen appears on theTV.  
From the left,  
Step by step playback Slow motion ➜  
Fast motion Angle Zoom  
3
If you are using an external equipment (eg. audio  
system or receiver), turn them on and select the  
appropriate input source that was used to  
connect to the DVD player output. Refer to the  
equipment owners manual for detail.  
Menu bar 3  
From the left,  
Title Chapter Time Search ➜  
FavouriteTrack Selection (FTS)  
Menu Bars onTV Screen  
G
G
Operations can be carried out directly via the  
multiple menu bars on theTV screen.  
The following functions are available via the  
menu bars. Pressing SYSTEM MENU keys  
repeatedly will toggle through menu bar 1, menu  
bar 2, menu bar 3 and menu bar OFF:  
Temporary Feedback Field Icons  
These icons will appear on the top left hand  
corner of yourTV screen.  
Scan  
Repeat A to end  
Repeat A–B  
Angle  
Repeat All  
RepeatTitle  
RepeatTrack  
Repeat Chapter  
Shuffle  
Child Lock On  
Child Safe  
Resume  
Shuffle Repeat  
Action Prohibited  
11  
 
Preparation  
Black level shift (NTSC output only)  
Personal Preferences  
In the Personal Preferences settings menu, you  
can customize you player to suit your own  
particular requirements.  
Select ON for adapting the colour dynamics to  
obtain richer contrasts.  
General operation:  
1
2
3
Press SYSTEM MENU on the remote control.  
The will be highlighted in the menu bar.  
Press 4to activate the Personal Preferences  
menu.  
Video shift  
4
5
Use the 1 2 3 4keys to toggle through the  
functions and select your preferred option.  
Press OK to confirm a highlighted selection.  
The following items are available:  
Use this setting to personalize the position of  
the picture on yourTV by scrolling it to the left  
or right.  
Picture  
TV Shape  
Select the aspect ratio of theTV to be  
connected.  
16:9 when you connect a wide-screenTV to  
the DVD player.  
4:3 LETTER BOX when you connect a  
normalTV to the DVD player. Displays a wide  
picture with bands displayed on the upper and  
lower portions of theTV screen.  
4:3 PAN SCAN when you connect a  
normalTV to the DVD player. Displays the wide  
picture on the wholeTV screen with a portion  
automatically cut off.  
Smart Picture  
Colour settings  
You can select one of five predefined sets of  
colour settings and one set (Personal) which you  
can define yourself.  
16:9  
4:3  
Letter Box  
When Personal is selected it allows you to fine-  
tune saturation, brightness and contrast  
Use 3or 4keys to adjust the values of these  
parameters.  
4:3  
Pan Scan  
Note:  
Pan Scan is subject to availability on the disc.  
12  
 
Preparation  
TV System (NTSC/PAL Conversion)  
Analogue output  
Allows you to select between PAL, NTSC and  
AUTO mode depending on yourTV.  
The conversions supported are as follows:  
Select Stereo, Dolby Surround-compatible or 3D  
Sound output to match your systems playback  
capability.  
Disc  
Output format  
Selected mode  
Type  
Format  
NTSC  
PAL  
AUTO  
NTSC  
PAL  
NTSC  
PAL  
NTSC  
DVD  
VCD  
Not  
Supported  
PAL  
PAL  
PAL  
PAL  
NTSC  
NTSC  
NTSC  
PAL  
NTSC  
PAL  
1
2
In the Personal Preferences Menu, select TV  
System.  
Press 3or 4to select PAL, NTSC or AUTO.  
Night Mode  
When set to ON, the dynamics of your sound  
output are optimised. High volume outputs are  
softened, enabling you to watch your favourite  
action movie without disturbing others.  
Notes:  
AUTO can only be selected when using aTV  
that has both the NTSC and PAL systems.  
This is applicable for CVBS output on cinch  
and SCART only.  
Slight picture distortions may occur due to this  
Karaoke vocal  
Put this setting to ON only when a multi-channel  
karaoke DVD is being played.The karaoke  
channels on the disc will then be mixed into a  
normal stereo sound.  
conversion.This is normal.Thus, the AUTO format  
is most suitable for the best picture quality.  
If you have a PAL onlyTV, ensure that your  
PAL/NTSC setting is PAL.  
Sound  
Digital output  
Digital output selection enables you to specify  
the type of digital output which is suitable to  
your receiver.  
Select ALL (default setting), if you had connected  
your DIGITAL AUDIO OUT to a multichanel  
decoder receiver.  
Select PCM only if your receiver is not capable  
of decoding multichannel audio.  
Select OFF to deactivate the DIGITAL AUDIO  
OUT.  
13  
 
Preparation  
Bit Rate Indicator  
Language  
Press the DISPLAY key to activate the bit rate  
indicator.When activated, the bit rate for video  
and audio, as well as the total bit rate is  
displayed.This is only applicable during playback  
of DVD and SVCD discs.  
Selecting disc languages:  
Menu/Audio/Subtitle language  
G
G
This is to select the audio language, subtitle  
language and the language used inTV screen  
menus or DVD menus which will always be used  
for every disc to be played back.  
If the language selected is not available on the  
disc, the default language designated by each disc  
will be selected.  
Features  
Access Control  
Help text  
Access Control contains the following features:  
Child Lock - When Child Lock is set to ON, a 4-  
digit code needs to be entered in order to  
playback discs.  
When set to ON, help text describes the icons  
selected. Select OFF if you no longer require the  
help text.  
Parental control - Allows the conditional  
presentation of DVDs containing Parental  
Control information (see Access Control’  
section).  
PBC (Playback Control - forVCD)  
The Playback Control can be set to ON or OFF  
(see section SpecialVCD & SVCD Featuresfor  
details).  
StatusWindow  
Smart Power OFF  
Displays the current status of the player and  
appears with the menu bar. When disc playback  
is stopped, it is displayed with the Temporary  
Feedback Fieldin the default screen. See On-  
Screen Displayinformation;  
Puts the set to standby after a predefined time.  
This can be set to Enable or Disable.  
Factory setting is ON. Select OFF to suppress  
display of the Status Window.  
14  
 
Operation  
Basic Playback  
Playing a DVD-Video  
1
2
Press STANDBY ON on the front panel.  
Press OPEN/CLOSE /on the front panel to  
open disc loading tray.  
Place the chosen disc in the tray, with the label  
facing up.  
Press OPEN/CLOSE /again to close the tray.  
READING appears in the status window and  
on the player display, and playback starts  
automatically.  
G
G
DVD video discs may have one or moreTITLES,  
and eachTITLE may have one or more  
CHAPTERS.  
3
4
Playback stops at the end of eachTITLE.  
DVD-VIDEO DISC  
TITLE 1  
TITLE 2  
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2  
CHAPTER 3  
Playing a title  
1
2
Insert a disc and close the tray, playback starts  
automatically.  
TheTV screens and DVD players display  
shows the type of disc loaded, discs information  
and playing time.  
When the Disc Menu appear on theTV screen,  
use 4312keys or numerical keys on the  
remote control to select an option and continue  
playback.  
If the titles are numbered , press the numerical  
keys or use the 43keys to select desired title  
in the menubar.  
Notes:  
DVDs may have a region code.Your player will  
not play discs that have a region code different  
from the region code of your player.  
3
4
If ‘Child Lock’ is set to ON and the disc  
inserted is not authorised, the 4-digit code must  
be entered and/or the disc must be authorised  
(see ‘Access Control’).  
To stop playback, press STOP.  
Smart Resume  
G
In stop mode and when a disc has not been  
ejected,  
Pressing PLAY will automatically resume  
playback from the point where the playback was  
last stopped.  
To deactivate auto resume,  
Press STOP to stop playback.  
The help line text appears “Press Stop again to  
start from beginning” for 5 seconds.  
Press STOP again or unload the discs, the auto  
resume is cancelled.  
G
G
To activate auto resume,  
G
G
Reload the disc and press PLAY.  
Playback starts from the begining of the title.  
When resume icon .appears on the screen,  
press PLAY again.  
Playback will resume from the point where  
the playback was last stopped.  
Note:  
Resume feature is also applicable toVCDs  
and SVCDs.  
15  
 
Operation  
Playing aVideo CD  
Playing an Audio CD  
G
G
G
Video CDs may have one or moreTRACKS, and  
TRACKS may have one or more INDEXES.  
To make easy and convenient access, you can  
move betweenTRACKS and INDEXES.  
SomeVideo CDs have Play Back Control (PBC),  
which is a predefined playback sequence stored  
on the disc (see Playback Control section).  
G
G
Audio CDs contain onlyTRACKS.  
They can be played on your DVD player with  
the audio output connected to a stereo system  
or to yourTV.  
Select tracks using the menubar on theTV  
screen or by pressing the numerical keys directly.  
Your DVD player also allows you to compile  
FavouriteTrack Selection (FTS) programmes for  
your discs by selecting or excluding tracks of  
your choice (see FTS Programme - Audio CDs).  
G
G
VIDEO CD  
TRACK 1  
INDEX 2  
TRACK 2  
INDEX 2 INDEX 3  
INDEX 1  
INDEX 1  
AUDIO CD  
TRACKS  
1
2
3
4
5
6
7
8
9
10 11 12 ...  
Playing a disc  
1
2
Insert a disc and close the tray, playback starts  
automatically.  
The number of tracks and the total playing  
time of the disc will appear on theTV screen and  
DVD players display.  
Press PLAY.  
The current track number and its elapsed  
playing time will be displayed.  
Playing a disc  
Insert a disc and close the tray, playback starts  
automatically.  
The menu bar onTV screen will display the  
number of tracks for selection.  
Playback will stop at the end of the disc.  
To stop playback, press STOP.  
1
2
3
3
4
5
Playback will stop at the end of the disc.  
To stop playback, press STOP.  
5 Disc Resume feature is also applicable for  
VCDs and SVCDs (see “Smart Resume” section).  
16  
 
Operation  
Changing the audio language  
Special DVD Features  
1
2
Select Y (AUDIO) in the menu bar or press  
the AUDIO button on the remote control  
directly.  
Press AUDIO or 3/4repeatedly to select the  
different languages.  
DVDs may contain menus to navigate the disc  
and access special features. Press the appropriate  
numerical key or use the 4, 3, 2, 1keys to  
highlight your selection in the DVD menu and  
press OK to confirm.  
Subtitles  
Title/Disc menu  
1
2
Select Z (SUBTITLE) in the menu bar or  
press the SUBTITLE button on the remote  
control directly.  
Press SUBTITLE or 3/4repeatedly to select  
the different subtitles.  
1
Press DISC MENU.  
If the current title has a menu, the menu will  
appear on the screen. Otherwise, the disc menu  
will be displayed.  
If disc menu is available on the disc, audio  
language, subtitle options, chapters for the title  
and other options will appear for selection.  
To remove the title/disc menu, press DISC  
MENU again.  
2
3
SpecialVCD & SVCD Features  
Playback Control (PBC)  
1
2
Load aVideo CD with PBC and press PLAY.  
Go through the menu with the keys indicated on  
theTV screen until your chosen passage starts to  
playback. If a PBC menu consists of a list of  
tracks, you can select a track directly.  
Enter your choice with the numerical keys (0-9).  
Press RETURN to go back to the previous menu,  
if applicable on the menu.  
You may also select PBC OFF under Personal  
Preferences.  
When set to OFF, PBC menus are activated  
for further playback.  
Camera Angle  
Some discs contain scenes which have been shot  
simultaneously from various angles.  
This DVD player allows you to select the desired  
camera angle.  
3
4
G
When the DVD player encounters a scene shot  
in multiple angles, it will give you an indication on  
the Temporary Feedback Field.”  
The angle icon remains displayed until multiple  
angles are no longer available.  
Use the 3/4to select the required angle icon.  
Playback changes to the selected angle.  
You can also select } (ANGLE) in the menu  
bar or press the ANGLE button on the remote  
control directly.  
5
G
G
17  
 
Operation  
Search  
General Features  
DVD VCD  
Note:  
Unless stated, all operations described are  
1
2
Select  
press 4.  
(FAST MOTION) in the menu bar and  
based on remote control use. Some operations  
can be carried out using the menu bar on theTV  
screen.  
Use the 12keys to select the required speed: -  
32, -8 or -4 (backward), or +4, +8, +32  
(forward).  
Moving to another title/chapter  
DVD VCD  
3
4
Select 1 to play the disc at normal speed again.  
To exit FAST MOTION mode, press PLAYor 3.  
When a disc has more than one title/track or  
chapter, you can move to another title/chapter as  
follows:  
Press SYSTEM MENU, then select W or X in  
the menu bar.  
CD  
G
To search forward or backward through different  
speeds, you can also hold down Tor S  
for more than two seconds.  
1
2
Press 34or numerical keys to select a title/  
chapter.  
DVD VCD  
Slow Motion  
1
2
Select  
and press 4.  
Playback will pause.  
Use the cursor keys 12to select the required  
speed: -1, -1/2, -1/4 or -1/8 (backward), or +1/8,  
+1/4, +1/2 or +1 (forward).  
Select 1 to play the disc at normal speed again.  
If ;is pressed, the speed will be set to zero  
(PAUSE).  
(SLOW MOTION) in the menu bar  
CD  
1
Press Tor Sbriefly during playback to go  
to the next track or to return to the beginning  
of the currect track respectively.  
Press Stwice briefly to step back to the  
previous track.  
2
3
3
4
To go directly to any track, enter the track  
number using the numerical keys (0-9).  
5
To exit slow motion mode, press PLAY.  
Note:  
Long press of the Tor Skeys will  
switch the DVD player on BACKWARD or  
FORWARD search (see SEARCH section).  
18  
 
Operation  
Still Picture and Frame-by-frame  
DVD VCD  
DVD VCD CD  
Repeat A-B  
playback  
– DVD-Video Discs: repeat a sequence in a  
title  
1
2
3
Select  
(STEP) in the menu bar and press 4.  
– Video and Audio CDs: repeat a sequence  
in a track  
Press REPEAT A-B at your chosen starting point.  
Press REPEAT A-B again at your chosen end  
point.  
RPT A-B appears briefly on the front display,  
and the repeat sequence begins.  
To exit the sequence, press REPEAT A-B.  
Playback will pause.  
Use the cursor keys 12to select the previous  
or next picture frame.  
1
2
To exit step by step playback, press PLAY or 3.  
Note:  
You can also activate frame-by-frame  
playback by pressing the PAUSE key repeatedly  
on the remote control.  
3
Shuffle  
DVD  
DVD VCD  
CD  
Scan  
Scanning plays the first 10 seconds of each  
chapter/track on the disc.  
This shuffles the playing order of chapters within  
a title, if the title has more than one chapter.  
Press SHUFFLE during playback.  
SHUFFLE appears on the screen for about  
two seconds.  
1
2
Press SCAN.  
To continue playback at your chosen chapter/  
track, press SCAN again or press PLAY.  
1
2
To return to normal playback, press SHUFFLE  
again.  
Repeat  
DVD  
Repeat chapter/title/disc  
VCD CD  
G
G
To repeat the current chapter, press REPEAT.  
RPT CHP appears on the front display.  
To repeat the current title, press REPEAT a  
second time.  
RPT TTL appears on the front display.  
To repeat the entire disc, press REPEAT a third  
time.  
This shuffles the playing order of tracks within a  
disc , if the disc has more than one tracks.  
Press SHUFFLE during playback.  
SHUFFLE appears on the screen for about  
two seconds.  
1
2
G
G
To return to normal playback, press SHUFFLE  
again.  
RPT ALL appears on the front display.  
To exit Repeat mode, press REPEAT a fourth time.  
VCD CD  
Repeat track/disc  
G
G
To repeat the current track, press REPEAT.  
RPT TRK appears on the front display.  
To repeat the entire disc, press REPEAT a second  
time.  
RPT ALL appears on the front display.  
To exit Repeat mode, press REPEAT a third time.  
G
19  
 
Operation  
DVD VCD  
FTSVideo/Audio Programme  
Time search  
G
G
FavouriteTrack Selection (FTS) list contains up to  
20 items (titles, chapters).  
The most recent programme list will be placed  
on top of the existing list.  
TheTime Search function allows you to start  
playing at any chosen time on the disc.  
Select (TIME SEARCH) in the menu bar and  
press 4.  
Playback will pause.  
The elapsed playing time is displayed in a time  
edit box.  
Enter hours, minutes and seconds from left to  
right in the time edit box using remote control  
numerical key pad.  
Each time an item has been entered, the next  
item will be highlighted.  
Press OK to confirm the selected time.  
The time edit box will disappear and playback  
starts from the selected time position on the  
disc.  
1
2
3
DVD VCD  
Storing a Programme  
While playback is stopped, select VIDEO FTS  
c in the menu bar.  
Press 4to open the menu bar.  
The VIDEO FTS c menu appears.  
Press 2or 1or FTS (on the remote control) to  
select ON.  
1
2
3
Storing titles/tracks  
1
2
3
Press 4to select TITLES/TRACKS.  
Use 2and 1to select the require title/tracks.  
Press OK to store the entire selected title/tracks.  
The title number will be added to the list of  
selections.  
Storing chapters/indexes  
Press 4on the selected chapter/indexes number.  
The chapter/indexes number will be  
highlighted.  
Use 2and 1to select the required chapter  
number.  
Press OK to confirm the selection.  
The selected chapter/indexes confirmation  
will be added to the list of selections.  
Press SYSTEM MENU to exit the VIDEO FTS  
c menu.  
4
Press SYSTEM MENU to remove the menu bar.  
1
DVD VCD  
Zoom  
The Zoom function allows you to enlarge the  
video image and to pan through the enlarged  
image.  
2
3
1
2
Select  
(ZOOM).  
Press 3/4to activate the ZOOM function and  
select the required zoom factor: 1.33 or 2 or 4.  
Playback will continue.  
The selected zoom factor and Press OK to  
panappears below the menu bar.  
4
The zoomed picture will appear on theTV  
screen.  
3
Press OK to confirm the selection.  
The panning icon appears on the screen.  
Use the 1234keys to pan across the screen.  
When OK is pressed only the panned picture  
will be shown on the screen.  
4
5
6
To exit ZOOM mode, select zoom factor to  
Off(zoom factor 1) in the menu bar.  
20  
 
Operation  
Erasing a selection in a Programme  
While playback is stopped, select VIDEO FTS  
c in the menu bar.  
Erasing a track in a Programme  
1
1
2
3
4
Use 4to go to the programmed tracks.  
Use 2and 1to select the required number.  
Press OK to erase the selection.  
2
3
4
5
Use 4to select PROGRAM.  
Use 2and 1to select the required number.  
Press OK to erase the selection.  
Press SYSTEM MENU to exit.  
Press SYSTEM MENU to exit.  
Erasing all selections  
Use 4to select CLEARALL and press OK.  
All selections will be erased.  
G
Erasing all selections  
1
2
3
While playback is stopped, select VIDEO FTS  
c in the menu bar.  
Use 4to select CLEAR ALL and press OK.  
All selections will be erased.  
Press SYSTEM MENU to exit.  
CD  
Storing a Programme  
1
2
3
Load a disc and stop playback.  
Press 4to go to the list of available tracks.  
Use 2and 1to select the required tracks or  
directly using remote control numeric key.  
Press OK to store the selected tracks.  
The track number will be added to the list of  
selections.  
4
Switching a Programme ON/OFF  
Use 34to move and select desired tracks.  
Press 2or 1to select either ON or OFF.  
1
2
21  
 
Operation  
Album/Title  
MP3 Disc Features  
This feature allows you to view and select the  
next or previous MP3 disc Album/Title.  
Press 3/4to scroll through the previous or next  
Album.  
Press 1/2to scroll through the previous or next  
Track.  
You can also select the desired album/track  
number directly using the numeric keys on the  
remote control.  
Support following MP3-CD formats  
(ISO9660 format):  
Max. 30 characters  
Max. nested directory is 8 levels  
The max.ALB number is 32  
SupportedVBR bit-rate  
Supported sampling frequencies for MP3 disc  
are: 32 kHz, 44.1 kHz, 48 kHz  
Supported Bit-rates of MP3 disc are: 32, 64, 96,  
128, 192, 256 (kbps)  
1
2
3
G
G
G
G
G
G
Note:  
In STOP mode: numbers are used for  
ALBUM selection.  
In PLAY mode:numbers are used for TRACK  
Following formats can’t be supported  
The files like *.WMA, *.AAC, *.DLF, *.M3U, *.PLS  
Chinese filenames  
G
G
G
G
selection.  
The non-session closed discs  
The discs recorded under UDF format  
Downloading MP3 files from the Internet or  
copying songs from your own legal discs is a  
delicate process.  
Approximate total  
MP3-CD time  
Approximate  
Reduction Ratio  
Sound  
Quality  
G
Only the following functions are possible for  
MP3 discs:  
STOP / PLAY / PAUSE  
SKIP NEXT / PREVIOUS  
REPEAT (TRACK / ALBUM / DISC)  
Comment  
Bit Rate  
Sound quality significantly affected  
not recommended.  
AM radio  
32 kbps  
64 kbps  
40 : 1  
20 : 1  
15 : 1  
10 : 1  
5 : 1  
40 hrs  
20 hrs  
15 hrs  
10 hrs  
5 hrs  
FM radio  
Near-CD  
CD-like  
CD*  
Balanced sound quality  
compression rate  
96 kbps  
128 kbps  
256 kbps  
320 kbps  
Compression rate low  
suggest to play CDs instead  
CD*  
3 : 1  
3 hrs  
MP3 Discs - Album/Track/Disc  
You may experience an occasional skip”  
while listening to your MP3 files.This is  
normal.  
G
To repeat a track, press REPEAT.  
RPT TRK appears on the player display.  
To repeat an album, press REPEAT a second  
time.  
Additional note for MP3 disc Playback:  
In compliance with the SDMI, digital-out  
is muted while playing MP3 discs.  
Due to the recording nature of Digital  
Audio MP3 (DAM),only Digital Audio  
music will play.  
The disc reading time may exceed 10  
seconds due to the large number of songs  
compiled onto one disc.  
RPT ALB appears on the player display.  
To repeat the entire disc, press REPEAT a third  
time.  
RPT ALL appears on the player display.  
To exit REPEAT mode, press REPEAT a fourth  
time.  
G
RPT OFF appears on the player display.  
Playback of multi-session disc is  
supported for the first 10 sessions with the  
same format.  
For multi-session discs with different  
formats, only the first session will be  
available.  
22  
 
Access Control  
Each time a ‘child safe’ disc is played, it will be  
DVD VCD  
Child Lock  
placed on top of the list.When the list is full, the  
last disc in the list will be replaced when a new  
disc is added.  
Activating/deactivating the Child  
Lock  
Double-sided DVDs and multi-volumeVCDs  
may have a different ID for each side. In order to  
make the disc ‘child safe’, each side has to be  
authorised.  
1
When disc playback is stopped, select ACCESS  
CONTROL in the Personal Preferences menu  
using the 3/4keys.  
2
3
4
5
6
Enter a 4-digit code of your own choice twice.  
Move to CHILD LOCKusing the 3/4keys.  
Move to Ç / É using the 2keys.  
Select Ç using the 3/4keys.  
Press OK or 1to confirm, then press 1again to  
exit the Personal Preferences menu.  
Now unauthorised discs will not be played  
unless the 4-digit code is entered.  
7
Select É to deactivate the CHILD LOCK.  
Notes:  
Confirmation of the 4-digit code is necessary  
when:  
The code is entered for the very first time (see  
above),  
The code is changed or cancelled (see  
Deauthorising discs  
Insert the disc.  
Playback starts automatically.  
Press 9while { is visible.  
The | will appear and the disc is now  
deauthorised.  
‘Changing the 4-digit code’),  
1
2
DVD  
Parental Control  
Movies on DVDs may contain scenes not  
suitable for children.Therefore, discs may contain  
Parental Controlinformation which applies to  
the complete disc or to certain scenes on the  
disc.These scenes are rated from 1 to 8, and  
alternative, more suitable scenes are available on  
the disc. Ratings are country dependent.The  
Parental Controlfeature allows you to prevent  
discs from being played by your children or to  
have certain discs played with alternative scenes.  
Authorising discs  
Insert the disc.  
The child safedialog will appear.  
You will be asked to enter your secret code for  
Play Once or Play Always.’  
If Play Once, disc can be played when in the  
player and the player is ON.  
If Play Always, disc will become authorised and  
can always be played, even if the Child Lock is  
set to ON.  
1
2
G
G
Notes:  
The player memory can maintain 120  
authorised (‘Child safe’) disc titles.A disc will be  
placed in the list when ‘Play Alwaysis selected.  
23  
 
Access Control  
Activating/Deactivating Parental  
Control  
When disc playback is stopped, select ACCESS  
CONTROL in the Personal Preferences menu  
using the 3/4keys.  
Changing the 4-digit code  
1
When disc playback is stopped, select ACCESS  
CONTROL in the Personal Preferences menu  
using the 3/4keys.  
Enter the current 4 digit code.  
Move to CHANGE CODE using the 4and  
press the 2key.  
1
2
3
2
3
Enter your 4-digit code. If necessary, enter the  
code a second time.  
4
5
Enter the new 4-digit code.  
Enter the code a second time and reconfirm by  
pressing OK.  
Press 1to exit the menu.  
The new 4 digit code will be take effect.  
Move to Parental Control using the 3/4  
keys.  
Move to value adjustment (1-8) using the 2key.  
Then use the 3/4keys or the numerical keys on  
the remote control to select a rating from 1 to 8  
for the disc inserted.  
4
5
6
If you forget your 4 digit code  
Press 9to exit the Child Safescreen.  
Rating 0 (displayed as ‘– –’):  
Parental Control is not activated.The Disc will be  
played in full.  
1
2
Select ACCESS CONTROL in the Personal  
Preferences menu using the 3/4keys.  
The 4-digit code can be cancelled by pressing 9  
four times in the Access Controldialog.  
You can then enter a new code (twice!) as  
described above in Changing the 4 digit code.  
Ratings 1 to 8:  
3
4
The disc contains scenes not suitable for children.  
If you set a rating for the player, all scenes with  
the same rating or lower will be played. Higher  
rated scenes will not be played unless an  
alternative which has the same rating or lower is  
available on the disc. If no suitable alternative is  
found, playback will stop and the 4-digit code has  
to be entered.  
Parental Control Disclaimer  
This DVD player features the PARENTAL  
CONTROL system which is to activate when  
playing DVD discs furnished with certain  
software coding only.  
Also note that at the time of release of this DVD  
player, certain aspects of the technical standards  
had not been settled between set makers and  
the disc industries.  
6
Press OK or 1to confirm, then press 1again to  
exit the Personal Preferences menu.  
On this basis, Philips cannot guarantee the  
functioning of the PARENTAL CONTROL  
system and denies any liability associated with  
unintended watching of disc content.  
If in doubt, please make sure the disc plays  
according to your PARENTAL CONTROL  
settings before you allow children access to the  
player.  
Country  
1
When disc playback is stopped, select ACCESS  
CONTROL in the Personal Preferences menu  
using the 3/4keys.  
2
3
Enter the 4-digit code.  
Move to CHANGE COUNTRY using the 4  
key.  
4
5
6
Press the 2key.  
Select a country using 3/4.  
Press OK or 1to confirm, then press 1again to  
exit the menu.  
24  
 
Specifications  
PLAYBACK SYSTEM  
DVDVideo  
Video CD & SVCD  
CD (CD-Recordable and CD-Rewritable)  
MP3  
AUDIO PERFORMANCE  
DA Converter  
DVD  
24 bits  
fs 96 kHz  
fs 48 kHz  
fs 44.1 kHz  
fs 48 kHz  
fs 44.1 kHz  
4 Hz - 22 kHz  
4 Hz - 22 kHz  
4 Hz - 20 kHz  
4 Hz - 22 kHz  
4 Hz - 20 kHz  
110 dB  
CD/Video CD  
SVCD  
TV STANDARD (PAL/50Hz) (NTSC/60Hz)  
Signal-Noise (1kHz)  
Dynamic Range (1kHz)  
Crosstalk (1kHz)  
Number of lines  
Playback  
625  
Multistandard  
525  
(PAL/NTSC)  
100 dB  
110 dB  
Distortion and Noise (1kHz)  
90 dB  
VIDEO PERFORMANCE  
Video output  
1Vpp into 75 ohm  
CONNECTIONS  
SCART  
RGB (SCART) output 0.7Vpp into 75 ohm  
Euroconnector  
Black Level Shift  
Video Shift  
On/Off  
Left/Right  
Video Output  
Cinch (yellow)  
Audio L+R output  
Digital Output  
Cinch (white/red)  
1 coaxial  
AUDIO FORMAT  
IEC60958 for CDDA / LPCM  
IEC1937 for MPEG1/2 / Dolby  
Digital  
Digital  
MPEG  
Compressed  
Digital  
16, 20, 24 bits  
fs, 44.1, 48, 96 kHz  
Dolby Digital  
PCM  
CABINET  
Dimensions (w x h x d)  
Weight  
MPEG MP3  
MPEG Audio L3  
435 x 75 x 210.5 mm  
Approximately 1.9 Kg  
Analogue Stereo Sound  
Dolby Surround-compatible downmix from Dolby Digital  
multi-channel sound  
*
typical playing time for movie with 2 spoken languages and  
3D Sound for virtual 5.1 channel sound on 2 speakers  
3 subtitle languages  
Specifications subject to change without prior notice  
Maintenance  
Cleaning the Cabinet  
Cleaning the disc lens  
Use a soft cloth slightly moistened with a mild  
detergent solution. Do not use a solution  
containing alcohol, spirits, ammonia or abrasives.  
After prolonged use, dirt or dust may  
accumulate at the disc lens.To ensure good  
playback quality, clean the disc lens with Philips  
CD Lens Cleaner or any commercially available  
cleaner. Follow the instructions supplied with the  
cleaner.  
Cleaning Discs  
When a disc becomes dirty, clean it with a  
cleaning cloth.Wipe the disc from the centre out.  
Do not wipe in a circular motion.  
Do not use solvents such as benzine, thinner,  
commercially available cleaners, or antistatic  
spray intended for analogue records.  
25  
 
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will invalidate the  
warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair.  
Problem  
Solution  
No power  
Check if the AC power cord is properly connected.  
Press Standby-On key on the DVD player.  
No picture  
Check if theTV is switched on.  
Check the video connection.  
Distorted picture  
Sometimes a small amount of picture distortion  
may appear. This is not a malfunction.  
Completely distorted picture or  
black/white picture with DVD  
orVideo CD  
Make sure the NTSC/PAL setting at the DVD  
player matches the video signal of your television.  
(See NTSC/PAL Conversion/Settings)  
No sound or distorted sound  
Adjust the volume.  
Check that the speakers are connected correctly.  
Select another audio language (if available on the  
DVD video disc)  
No audio at digital output  
Check the digital connections.  
Check the settings menu to make sure the digital  
output is set to ALL or PCM.  
Check if the audio format of the selected audio  
language matches your receiver capabilities.  
No sound and picture  
Check that the SCART cable is connected to the  
correct device (See Connecting to aTV)  
Disc cant be played  
Ensure the disc label is facing up.  
Check if the disc is defective by trying another  
disc.  
Picture freezes momentarily  
during playback  
Check the disc for fingerprints/scratches and  
clean with a soft cloth wiping from centre to edge.  
No return to start-up screen when  
disc is removed  
Reset the unit by switching the player off, then on  
again.  
The player does not respond to  
the remote control  
Aim the remote control directly at the sensor on  
the front of the player.  
Reduce the distance to the player.  
Replace the batteries in the remote control.  
Re-insert the batteries with their polarities (+/–  
signs) as indicated.  
Buttons do not work or player stops  
responding  
To completely reset the player, unplug the AC  
cord from the AC outlet for 5-10 seconds.  
Player does not respond to some  
operating commands during playback.  
Operations may not be permitted by the disc.  
Refer to the instructions of the disc.  
DVDVideo player cannot read  
CDs/DVDs  
Use a commonly available cleaning CD/DVD to  
clean the lens before sending the DVDVideo  
player for repair.  
If you are unable to remedy a problem by following these hints, consult your dealer or service  
centre.  
26  
 

Peavey Guitar T 27 User Manual
Philips Cassette Player AQ 5040 20M User Manual
Philips Home Security System M100D User Manual
Philips Indoor Furnishings SL111A1 User Manual
Philips Portable DVD Player PD7010 77 User Manual
Pioneer VCR VR805 07 User Manual
Polaris Water Heater PC 100 34 2NV User Manual
Polycom CRT Television V700 User Manual
ProForm Home Gym PFEX39912 User Manual
Proline Ventilation Hood PLFW581 User Manual