Philips Home Theater System HTL9100 User Manual

Always there to help you  
Register your product and get support at  
HTL9100  
Question?  
Contact  
Philips  
User manual  
 
Contents  
1 Important  
2
Safety  
2
3
3
3
3
Care for your product  
Care of the environment  
Compliance  
Help and support  
2 Your SoundBar  
Indicators on the main unit  
Remote control  
4
4
5
5
6
7
Connectors  
Wireless speakers  
Wireless subwoofer  
3 Connect and set up  
Charge speakers  
7
7
8
8
9
Pair up with speakers/subwoofer  
Place speakers  
Connect toTV  
Connect digital devices through HDMI 10  
Connect audio fromTV and other  
devices  
10  
4 Use your SoundBar  
Adjust the volume  
Choose your sound  
MP3 player  
11  
11  
11  
12  
13  
13  
13  
Play music via Bluetooth  
Auto standby  
Apply factory settings  
5 Wall mount your SoundBar  
14  
14  
Wall mount  
6 Product specifications  
14  
15  
7 Troubleshooting  
EN  
1
 
responsibility for improper wall mounting  
that results in accident, injury or damage.  
Never place the product or any objects  
on power cords or on other electrical  
equipment.  
1 Important  
Read and understand all instructions before you  
use your product. If damage is caused by failure  
to follow instructions, the warranty does not  
apply.  
If the product is transported in  
temperatures below 5°C, unpack the  
product and wait until its temperature  
matches room temperature before  
connecting it to the power outlet.  
Parts of this product can be made of glass.  
Handle with care to avoid injury and damage.  
Safety  
Risk of electric shock or fire!  
Risk of overheating!  
Never expose the product and accessories  
to rain or water. Never place liquid  
containers, such as vases, near the product.  
If liquids are spilt on or into the product,  
disconnect it from the power outlet  
immediately. Contact Consumer Care to  
have the product checked before use.  
Never place the product and accessories  
near naked flames or other heat sources,  
including direct sunlight.  
Never install this product in a confined  
space.Always leave a space of at least four  
inches around the product for ventilation.  
Ensure curtains or other objects never  
cover the ventilation slots on the product.  
Risk of contamination!  
Do not mix batteries (old and new or  
carbon and alkaine, etc.).  
Danger of explosion if batteries are  
incorrectly replaced. Replace only with the  
same or equivalent type.  
Never insert objects into the ventilation  
slots or other openings on the product.  
Where the mains plug or an appliance  
coupler is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
Remove batteries if they are exhausted or  
if the remote control is not to be used for  
a long time.  
Batteries contain chemical substances, they  
should be disposed of properly.  
Disconnect the product from the power  
outlet before lightning storms.  
When you disconnect the power cord,  
always pull the plug, never the cable.  
Risk of swallowing batteries!  
The product/remote control may contain  
a coin/button type battery, which can be  
swallowed. Keep the battery out of reach  
of children at all times! If swallowed, the  
battery can cause serious injury or death.  
Severe internal burns can occur within two  
hours of ingestion.  
Risk of short circuit or fire!  
Before you connect the product to the  
power outlet, ensure that the power  
voltage matches the value printed on the  
back or bottom of the product. Never  
connect the product to the power outlet if  
the voltage is different.  
If you suspect that a battery has been  
swallowed or placed inside any part of the  
body, seek immediate medical attention.  
When you change the batteries, always  
keep all new and used batteries out of  
reach of children. Ensure that the battery  
compartment is completely secure after  
you replace the battery.  
Risk of injury or damage to the SoundBar!  
For wall-mountable products, use only the  
supplied wall mount bracket. Secure the  
wall mount to a wall that can support the  
combined weight of the product and the  
wall mount.WOOX Innovations bears no  
2
EN  
 
 
If the battery compartment cannot be  
completely secured, discontinue use of the  
product. Keep out of reach of children and  
contact the manufacturer.  
negative consequences for the environment and  
human health.  
Removing the disposable batteries  
To remove the disposable batteries, see battery  
installation section.  
Compliance  
This is CLASS II apparatus with double  
insulation, and no protective earth provided.  
Care for your product  
This product complies with the radio  
interference requirements of the European  
Community.  
Use only microfiber cloth to clean the product.  
Hereby,WOOX Innovations, declares that this  
product is in compliance with the essential  
requirements and other relevant provisions of  
Directive 1999/5/EC.  
A copy of the EC declaration of Conformity  
is available in the Portable Document  
Format (PDF) version of the user manual at  
Care of the environment  
Disposal of your old product and battery  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
Help and support  
For extensive online support, visit  
download the user manual and the quick  
start guide  
watch video tutorials (available only for  
selected models)  
find answers to frequently answered  
questions (FAQs)  
This symbol on a product means that the  
product is covered by European Directive  
2012/19/EU.  
email us a question  
chat with our support representative.  
This symbol means that the product contains  
batteries covered by European Directive  
2013/56/EU which cannot be disposed of with  
normal household waste.  
Inform yourself about the local separate  
collection system for electrical and electronic  
products and batteries. Follow local rules and  
never dispose of the product and batteries  
with normal household waste. Correct disposal  
of old products and batteries helps prevent  
Follow the instructions on the website to select  
your language, and then enter your product  
model number.  
Alternatively, you can contact Consumer Care  
in your country. Before you contact, note down  
the model number and serial number of your  
product.You can find this information on the  
back or bottom of your product.  
EN  
3
 
c HDMI 1  
Lights up when you select HDMI IN 1 as  
the input source.  
2 Your SoundBar  
d HDMI 2  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from  
the support that Philips offers, register your  
Lights up when you select HDMI IN 2 as  
the input source.  
e OPTICAL/COAX  
Lights up when you switch to optical  
or coaxial input source.  
Blinks when an unsupported audio  
format is detected.  
Indicators on the main unit  
This section describes the information of the  
LED indicators on the main unit.  
f AUX  
Lights up when you switch to AUX input  
source.  
g AUDIO-IN  
Lights up when you switch to AUDIO-IN  
source (3.5mm jack).  
a
h Bluetooth  
Lights up when you switch to  
Bluetooth mode and Bluetooth devices  
are paired.  
Blinks when you switch to Bluetooth  
mode and Bluetooth devices are not  
paired.  
b
c
d
e
f
g
h
i
j
a Volume indicator  
When you change volume, one  
or multiple indicators (up to eight  
indicators) light up to indicate the  
volume level.  
i V. SURR indicator  
Lights up when surround mode is  
selected.  
Off when stereo mode is selected.  
Blinks once when night mode/auto  
volume is enabled.  
Wireless pairing indicators  
During wireless pairing between the  
main unit and the surround speakers,  
eight indicators blink one by one.  
When the pairing succeeds, eight  
indicators light up for three seconds.  
If the pairing fails, eight indicators blink  
three times.  
Blinks twice when Dolby Digital audio  
is input.  
Blinks twice when night mode/auto  
volume is disabled.  
Blinks three times when DTS audio is  
input.  
b HDMI ARC  
j
(Standby-On/Standby indicator)  
When the SoundBar is in standby, the  
standby indicator turns red.  
Lights up when you select HDMI ARC  
as the input source.  
Blinks when no audio from the  
selected HDMI ARC source is  
detected, or when an unsupported  
audio format is detected.  
4
EN  
 
c Source buttons  
Remote control  
OPTICAL: Switch your audio source to  
the optical connection.  
This section includes an overview of the  
remote control.  
COAX: Switch your audio source to the  
coaxial connection.  
AUDIO-IN: Switch your audio source to  
the AUDIO-In connection (3.5mm jack).  
AUX: Switch your audio source to the  
AUX connection.  
a
b
Bluetooth: Switch to Bluetooth mode.  
d NIGHT MODE ON/OFF  
Turn night mode on or off.  
c
Bluetooth  
e Volume control  
+/-: Increase or decrease volume.  
: Mute or restore volume.  
f V.SURR  
Toggle between stereo and virtual  
surround sound.  
In HDMI-in mode (connected via  
HDMI IN 1 or HDMI IN 1), press and  
hold to switch audio output through  
the SoundBar speaker orTV speaker.  
j
i
d
e
h
g
g BASS +/-  
Increase or decrease bass.  
h TREBLE +/-  
Increase or decrease treble.  
f
i AUDIO SYNC +/-  
Increase or decrease audio delay.  
j AUTOVOLUME ON/OFF  
Turn auto volume on or off.  
a
(Standby-On)  
Switch the SoundBar on or to standby.  
When EasyLink is enabled, press  
and hold for at least three seconds  
to switch all connected HDMI CEC  
compliant devices to standby.  
Connectors  
This section includes an overview of the  
connectors available on your SoundBar.  
b HDMI selection  
HDMI ARC: Switch your source to HDMI  
ARC connection.  
HDMI 1: Switch your source to the HDMI  
IN 1 connection.  
HDMI 2: Switch your source to the HDMI  
IN 2 connection.  
EN  
5
 
Rear connectors  
Wireless speakers  
The SoundBar comes with 2 wireless surround  
speakers (left and right).  
POWER ON  
a
b
c
d e f  
g
h
b
c
a
*The illustration above is for the right speaker's  
top view and bottom view.  
a AC MAINS~  
Connect to the power supply.  
a Speaker indicator  
b TOTV-HDMI OUT (ARC)  
During wireless pairing between the  
main unit and the speaker, the indicator  
blinks red quickly.  
Connect to the HDMI (ARC) input on the  
TV.  
When the pairing succeeds, the  
indicator turns into solid white  
(undocked from the main unit), or the  
indicator lights up white 30 seconds  
then fades off (being docked into the  
main unit).  
When the pairing fails or pairing  
remains undone, the indicator blinks  
red slowly.  
When the speaker is being charged  
(docked into the main unit), the  
indicator lights up amber.  
When the speaker goes to standby, the  
indicator blinks amber.  
c HDMI IN 2  
Connect to the HDMI output on a digital  
device.  
d HDMI IN 1  
Connect to the HDMI output on a digital  
device.  
e DIGITAL IN-OPTICAL  
Connect to an optical audio output on the  
TV or a digital device.  
f DIGITAL IN-COAXIAL  
Connect to a coaxial audio output on the  
TV or a digital device.  
g AUDIO IN-AUX  
b Connection key  
Connect to an analog audio output on the  
TV or an analog device.  
Press with a pin to enter the pairing mode  
for the speaker.  
h AUDIO-IN  
c POWER ON  
Audio input from, for example, an  
MP3 player (3.5mm jack).  
Press to turn on the wireless speaker if it  
automatically goes to standby.  
6
EN  
 
3 Connect and set  
up  
Wireless subwoofer  
The SoundBar comes with a wireless subwoofer.  
This section helps you connect your SoundBar  
to aTV and other devices, and then set it up.  
For information about the basic connections of  
your SoundBar and accessories, see the quick  
start guide.  
Note  
For identification and supply ratings, see the type plate  
at the back or bottom of the product.  
Before you make or change any connections, make sure  
that all devices are disconnected from the power outlet.  
a CONNECT  
Press to to enter the pairing mode for the  
subwoofer.  
Charge speakers  
b Subwoofer indicator  
When the power is turned on, the  
If the wireless surround speaker is undocked  
from the main unit, its battery level is indicated  
by the indicator on the speaker.  
indicator lights up.  
During wireless pairing between the  
subwoofer and the main unit, the  
indicator blinks white quickly.  
When the pairing succeeds, the  
indicator lights up white.  
Light up white: full battery  
Light up red: low battery level (less than  
30% remaining)  
Flash red: near empty (less than 10%  
remaining)  
When the pairing fails, the indicator  
blinks white slowly.  
c AC MAINS~  
Connect to the power supply.  
1 Dock your speakers onto the main unit to  
charge the speakers.  
2 Turn on the main unit.  
» During charging, the indicator on the  
speaker lights up amber.  
» When fully charged, the indicator  
on the speaker lights up white for  
30 seconds.  
EN  
7
 
5 Repeat the steps above to pair up the  
Note  
other surround speaker with the main unit.  
It may take around 2 hours to fully charge the speakers.  
If the charging lasts more than 4 hours during standby  
of the main unit, the speakers automatically switch to  
standby.  
Pair up with the subwoofer  
1 Turn on the SoundBar and the subwoofer.  
» If the connection to the SoundBar is  
lost, the indicator on the subwoofer  
blinks white slowly.  
Pair up with speakers/  
subwoofer  
2 Press the CONNECT button on the  
subwoofer to enter the pairing mode.  
» The indicator on the subwoofer blinks  
white quickly.  
The wireless speakers and subwoofer  
automatically pair up with the SoundBar for  
wireless connection when you turn on the  
SoundBar, the speakers and the subwoofer.  
If no audio from the wireless speakers and  
subwoofer can be heard, manually pair up the  
speakers and the subwoofer.  
3 On the remote control, press AUX, and  
then press TREBLE -, BASS + and +  
(Volume) within three seconds.  
» If the pairing succeeds, the indicator on  
the subwoofer lights up white.  
» If the pairing fails, the indicator on the  
subwoofer blinks white slowly.  
Pair up with the speakers  
4 If the pairing fails, repeat the steps above.  
1 Turn on the SoundBar and the surround  
speaker.  
» If the connection to the SoundBar is  
lost, the indicator on the speaker blinks  
red slowly.  
Place speakers  
For best sound effect, position all the speakers  
towards the seating position and place them  
close to your ear level (seated).  
2 Press the Connection key on the speaker  
with a pin to enter the pairing mode.  
» The indicator on the speaker blinks red  
quickly.  
3 On the remote control, press AUX, and  
then press TREBLE -, BASS + and +  
(Volume) within three seconds.  
» If the pairing succeeds, the indicator on  
the speaker lights up white (undocked  
from the main unit), or the indicator  
on the speaker lights up white for  
30 seconds (being docked into the  
main unit).  
SUB  
WOOFER  
» If the pairing fails, the indicator on the  
speaker blinks red slowly.  
4 If the pairing fails, repeat the steps above.  
REAR L  
REAR R  
8
EN  
 
   
Note  
Connect toTV  
Surround sound depends on factors such as room  
shape and size, type of wall and ceiling, windows and  
reflective surfaces, and speaker acoustics. Experiment  
with the speaker positions to find the optimum setting  
for you.  
Connect your SoundBar to aTV.You can listen  
to audio fromTV programs through your  
SoundBar. Use the best quality connection  
available on your SoundBar andTV.  
Follow these general guidelines for speakers  
placement.  
Connect toTV through HDMI (ARC)  
1 Seating position:  
Your SoundBar supports HDMI with Audio  
Return Channel (ARC). If yourTV is HDMI ARC  
compliant, you can hear theTV audio through  
your SoundBar by using a single HDMI cable.  
This is the center of your listening area.  
2 Place the SoundBar in front of the seating  
position.  
3 REAR L (rear left) and REAR R (rear right)  
surround speakers:  
Place the rear surround speakers to the  
left and right side of your seating position,  
either in line with it or slightly behind it.  
TV  
4 SUBWOOFER (subwoofer):  
Place the subwoofer at least one meter  
to the left or right of theTV. Leave about  
10-centimeter clearance from the wall.  
1 Using a High Speed HDMI cable, connect  
the HDMI OUT (ARC) connector on your  
SoundBar to the HDMI ARC connector  
on theTV.  
Dock the surround speakers  
You can also dock your surround speakers onto  
the main unit to listen to audio, for example,  
watchingTV shows and news.  
The HDMI ARC connector on theTV  
might be labeled differently. For details,  
see theTV user manual.  
2 On yourTV, turn on HDMI-CEC  
operations. For details, see theTV user  
manual.  
Note  
SoundBar. (see 'Connect audio fromTV and other  
devices' on page 10)  
If yourTV has a DVI connector, you can use an HDMI/  
DVI adapter to connect toTV. However, some of the  
features may not be available.  
EN  
9
 
Option 1: Connect audio through a  
digital optical cable  
Connect digital devices  
through HDMI  
Best quality audio  
Connect a digital device such as a set-top box,  
DVD/Blu-ray player, or games console to your  
SoundBar through a single HDMI connection.  
When you connect the devices in this way and  
play a file or game, the  
TV  
video is automatically displayed on your  
TV, and  
audio is automatically played on your  
SoundBar.  
1 Using an optical cable, connect the  
OPTICAL connector on your SoundBar to  
the OPTICAL OUT connector on theTV  
or other device.  
1 Using a High Speed HDMI cable, connect  
the HDMI OUT connector on your digital  
device to the HDMI IN 1/2 on your  
SoundBar.  
The digital optical connector might be  
labeled SPDIF or SPDIF OUT.  
2 Connect your SoundBar toTV through  
HDMI OUT (ARC).  
Option 2: Connect audio through a  
digital coaxial cable  
If theTV is not HDMI CEC compliant,  
select the correct video input on your  
TV.  
Good quality audio  
3 On the connected device, turn on HDMI-  
CEC operations. For details, see the user  
manual of the device.  
Connect audio fromTV and  
other devices  
Play audio fromTV or other devices through  
your Soundbar speakers.  
Use the best quality connection available on  
yourTV, Soundbar, and other devices.  
1 Using a coaxial cable, connect the  
COAXIAL connector on your SoundBar  
to the COAXIAL/DIGITAL OUT  
connector on theTV or other device.  
The digital coaxial connector might be  
Note  
labeled DIGITAL AUDIO OUT.  
When your Soundbar andTV are connected through  
HDMI ARC, an audio connection is not required.  
10 EN  
 
 
Option 3: Connect audio through  
analog audio cables  
4 Use your  
SoundBar  
Basic quality audio  
1 Using an analog cable, connect the AUX  
connectors on your SoundBar to the  
AUDIO OUT connectors on theTV or  
other device.  
This section helps you use the SoundBar to play  
audio from connected devices.  
Before you start  
Make the necessary connections described  
in the quick start guide and the user  
manual.  
DVD  
Switch the SoundBar to the correct source  
for other devices.  
Adjust the volume  
1 Press +/- (Volume) to increase or decrease  
a volume level.  
To mute sound, press (Mute).  
To restore the sound, press (Mute)  
again or press +/- (Volume).  
Volume indicator  
When you change volume, one or multiple  
Volume indicator (up to 8 indicators) on  
the main unit light up to indicate a volume  
level.The more indicators light up, the  
higher the volume level is.  
0
45  
If you do not press the volume key for five  
seconds, the volume indicators light off, and  
the current source indicator and the sound  
mode indicator light up.  
Choose your sound  
This section helps you choose the ideal sound  
for your video or music.  
EN 11  
 
Surround sound mode  
Synchronize picture and sound  
Experience an immersive audio experience with  
surround sound modes.  
If the audio and video are not synchronized,  
delay the audio to match the video.  
1 Press V.SURR to select a surround mode.  
1 Press AUDIO SYNC +/- to synchronize  
Surround: Creates a surround listening  
experience.The V.SURR indicator on  
the main unit lights up.  
the audio with the video.  
AUDIO SYNC + increases the sound  
delay, and AUDIO SYNC - decreases  
the sound delay.  
Stereo:Two-channel stereo sound.  
Ideal for listening to music.  
» When you change the value of sound  
delay, the more value/delay you set,  
the more indicators on the main unit  
light up.  
Equalizer  
Change the high frequency (treble) and low  
frequency (bass) settings of the SoundBar.  
Night mode  
1 Press TREBLE +/- or BASS +/- to change  
the frequency.  
For quiet listening, decrease the volume of loud  
sounds when audio is played. Night mode is  
only available for Dolby Digital soundtracks.  
Treble/bass indicator  
When you change frequency levels, one  
or multiple indicator (up to 8 indicators)  
on the main unit light up to indicate a  
frequency level.The more indicators light  
up, the more the treble or bass is.  
1 Press NIGHT MODE ON/OFF to turn  
night mode on or off.  
» When night mode is turned on, the  
V.SURR indicator blinks once.  
» When night mode is turned off, the  
-4  
4
V.SURR indicator blinks twice.  
Note  
If auto volume is set to turned on, you cannot enable  
the night mode.  
Auto volume  
Turn the auto volume on to keep the volume  
constant when you switch to a different source.  
It also compresses the sound dynamics,  
increasing the volume for quiet scenes and  
decreasing the volume for loud scenes.  
MP3 player  
Connect your MP3 player to play your audio  
files or music.  
1 Press AUTOVOLUME ON/OFF to turn  
auto volume on or off.  
What you need  
» When auto volume is turned on, the  
V.SURR indicator blinks once.  
An MP3 player.  
A 3.5mm stereo audio cable.  
» When auto volume is turned off, the  
V.SURR indicator blinks twice.  
1 Using the 3.5mm stereo audio cable,  
connect the MP3 player to the AUDIO-IN  
connector on your SoundBar.  
2 Press AUDIO-IN.  
12 EN  
 
3 Press the buttons on the MP3 player to  
5 To exit Bluetooth, select other source.  
select and play audio files or music.  
When your switch back to Bluetooth  
mode, Bluetooth connection remains  
active.  
On the MP3 player, it is recommended  
to set the volume in the range of 80%  
maximum volume.  
Note  
The music streaming may be interrupted by obstacles  
between the device and SoundBar, such as wall, metallic  
casing that covers the device, or other devices nearby  
that operate in the same frequency.  
If you want to connect your SoundBar with another  
Bluetooth device, disable the currently connected  
Bluetooth device.  
Play music via Bluetooth  
Through Bluetooth, connect the SoundBar with  
your Bluetooth device (such as an iPad, iPhone,  
iPod touch,Android phone, or laptop), and then  
you can listen to the audio files stored on the  
device through your SoundBar speakers.  
What you need  
A Bluetooth device which supports  
Bluetooth profile A2DP, and with Bluetooth  
version as 2.1 + EDR.  
The operational range between the  
SoundBar and a Bluetooth device is  
approximately 10 meters (30 feet).  
Auto standby  
When playing media from a connected device,  
the SoundBar automatically switches to standby  
if:  
no button is pressed for 15 minutes, and  
no audio/video playback is detected from a  
connected device.  
1 Press Bluetooth on the remote control to  
switch the SoundBar to Bluetooth mode.  
» The Bluetooth indicator blinks.  
2 On the Bluetooth device, switch on  
Bluetooth, search for and select Philips  
HTL9100 to start connection (see the  
user manual of the Bluetooth device on  
how to enable Bluetooth).  
Apply factory settings  
You can reset your SoundBar to the default  
settings programmed at the factory.  
1 In AUX mode, press and hold NIGHT  
» During connection, the Bluetooth  
indicator blinks.  
MODE OFF for 5 seconds.  
» When the factory settings restore is  
complete, the SoundBar automatically  
switches off and restarts.  
3 Wait until you hear a beep sound from the  
SoundBar.  
» The Bluetooth indicator lights up.  
» If the connection fails, the Bluetooth  
indicator blinks continually.  
4
Select and play audio files or music on  
your Bluetooth device.  
During play, if a call is coming, music  
play is paused. Play resumes when the  
call ends.  
If music streaming is interrupted, place  
the Bluetooth device closer to the  
Soundbar.  
EN 13  
 
5 Wall mount  
your SoundBar  
6 Product  
specifications  
Note  
read all safety precautions. (see 'Safety' on page  
2)  
Specifications and design are subject to change without  
notice.  
Wall mount  
Amplifier  
Total output power:  
Note  
210W RMS (+/- 0.5 dB, 30%THD) /  
168W RMS (+/- 0.5 dB, 10%THD)  
Frequency response: 20 Hz-20 kHz / ±3 dB  
Signal-to-noise ratio: > 65 dB (CCIR) /  
(A-weighted)  
You must detach the surround speakers from the main  
unit before wall mounting or un-mounting.  
Improper wall mounting may result in accident, injury or  
damage. If you have any query, contact Consumer Care  
in your country.  
Secure the wall mount to a wall that can support the  
combined weight of the product and the wall mount.  
Before wall mount, you need not remove the four  
rubber feet at the bottom of the soundbar, otherwise  
the rubber feet cannot be fixed back.  
Input sensitivity:  
AUX: 400 mV  
AUDIO-IN: 220 mV  
Audio  
Screw length/diameter  
Depend on the type of wall mounting this wall  
mount bracket, make sure that you use screws  
of a suitable length and diameter.  
S/PDIF Digital audio input:  
Coaxial: IEC 60958-3  
Optical:TOSLINK  
Bluetooth  
Bluetooth profiles:A2DP  
Bluetooth version: 2.1 + EDR  
3 - 3.5mm  
Main unit  
Power supply: 110-240V~, 50/60 Hz  
> 25mm  
Power consumption: 50 W  
Standby power consumption: ≤ 0.5 W  
Speaker impedance:  
For information about how to wall your  
SoundBar, see the wall mount guide.  
Woofer: 8 ohm  
tweeter: 8 ohm  
Speaker drivers: 2 x 63.5 mm (2.5") woofer  
+ 2 x 25.4 mm (1") tweeter  
Dimensions (WxHxD):  
1035 x 73 x 156 mm (with 2 surround  
speakers attached)  
Weight: 3.9 kg  
14 EN  
 
Surround speakers  
7 Troubleshooting  
Speaker impedance: 8 ohm  
Speaker drivers: 2 x 63.5 mm (2.5") full  
range  
Warning  
Dimensions (WxHxD):  
191 x 73 x 156 mm  
Weight: 0.7 kg/each  
Risk of electric shock. Never remove the casing of the  
product.  
To keep the warranty valid, never try to repair  
the product yourself.  
If you have problems using this product, check  
the following points before you request service.  
If you still have a problem, get support at  
Subwoofer  
Power supply: 110-240V~, 50/60 Hz  
Power consumption: 30 W  
Standby power consumption: ≤ 0.5 W  
Impedance: 4 ohm  
Speaker drivers: 1 x 165 mm (6.5") woofer  
Dimensions (WxHxD):  
Main unit  
200 x 510 x 201 mm  
Weight: 4.9 kg  
The buttons on the SoundBar do not work.  
Disconnect the SoundBar from the power  
supply for a few minutes, then reconnect.  
Wall mount  
Sound  
Dimensions (WxHxD):  
40 x 100 x 26.5 mm  
Weight: 0.1 kg/each  
No sound from SoundBar speakers.  
Connect the audio cable from your  
SoundBar to yourTV or other devices.  
However, you do not need a separate  
audio connection when:  
Remote control batteries  
2 x AAA-R03-1.5V  
the SoundBar andTV are connected  
through HDMI ARC connection, or  
a device is connected to the HDMI IN  
connector on your SoundBar.  
Standby information  
When the product remains inactive for  
15 minutes, it automatically switches to  
standby or networked standby.  
The power consumption in standby or  
networked standby is less than 0.5W.  
To deactivate Bluetooth connection, press  
and hold the Bluetooth button on the  
remote control.  
To activate Bluetooth connection, enable  
Bluetooth connection on your Bluetooth  
device, or enable Bluetooth connection via  
the NFC tag (if available).  
Reset your SoundBar to its factory settings.  
On the remote control, select the correct  
audio input.  
Make sure that the SoundBar is not muted.  
No sound from the wireless surround  
speakers.  
main unit (see 'Pair up with the speakers'  
on page 8).  
Dock the wireless surround speakers into  
the main unit to charge the battery.  
EN 15  
 
No sound from the wireless subwoofer.  
main unit (see 'Pair up with the subwoofer'  
on page 8).  
Distorted sound or echo.  
If you play audio from theTV through the  
SoundBar, make sure that theTV is muted.  
Audio and video are not synchronized.  
Press AUDIO SYNC +/- to synchronize  
the audio with the video.  
Bluetooth  
A device cannot connect with the SoundBar.  
The device does not support the  
compatible profiles required for the  
SoundBar.  
You have not enabled the Bluetooth  
function of the device. See the user manual  
of the device on how to enable the  
function.  
The device is not correctly connected.  
Connect the device correctly.  
The SoundBar is already connected with  
another Bluetooth device. Disconnect the  
connected device, then try again.  
Quality of audio play from a connected  
Bluetooth device is poor.  
The Bluetooth reception is poor. Move the  
device closer to the SoundBar, or remove  
any obstacle between the device and the  
SoundBar.  
The connected Bluetooth device connects and  
disconnects constantly.  
The Bluetooth reception is poor. Move the  
device closer to the SoundBar, or remove  
any obstacle between the device and the  
SoundBar.  
Turn off Wi-Fi function on the Bluetooth  
device to avoid interference.  
For some Bluetooth, the Bluetooth  
connection can be deactivated  
automatically to save power.This does not  
indicate any malfunction of the SoundBar.  
16 EN  
 
WOOX Innovations Netherlands B.V.  
HK-WK1437-HTL9100  
2014/09  
(Document No. / Numéro du document)  
(yyyy/mm in which the CE mark is affixed / aaaa/mm  
au cours de laquelle le marquage CE a été apposé)  
EUROPEAN DECLARATION OF CONFORMITY  
(DECLARATION DE CONFORMITE CE)  
We, WOOX INNOVATIONS NETHERLANDS B.V.  
(Company name / Nom de l’entreprise)  
Building SFH4, Kastanjelaan 400, 5616 LZ Eindhoven, The Netherlands  
(address / adresse)  
declare under our responsibility that the product(s):  
(déclarons sous notre propre responsabilité que le(s) produit(s))  
PHILIPS  
HTL9100/12  
(brand name, nom de la marque)  
SoundBar Speaker  
(product description, description du produit)  
(Type version or model, référence ou modèle)  
to which this declaration relates is in conformity with the following harmonized standards:  
(auquel cette déclaration se rapporte, est conforme aux normes harmonisées suivantes)  
EN 60065:2002+A1(2006)+A11(2008)+A2(2010)+A12(2011)  
EN 301489-1 V1.9.2 (2011)  
EN 301489-17 V2.1.1 (2012)  
V1.4.1(2002)  
EN 300328 V1.8.1 (2012)  
V1.6.1(2010)  
EN301489-3  
EN300440-1  
EN300440-2  
V1.4.1(2010)  
EN 55013:2001+A1(2003)+A2(2006)  
EN 55020:2007+A11(2011)  
EN55022:2010  
EN 62479:2010  
EN 50564:2011  
EN 50581:2012  
following the provisions of:  
(conformément aux exigences essentielles et autres dispositions pertinentes de:)  
1999/5/EC  
2006/95/EC  
2004/108/EC  
2011/65/EU  
2009/125/EC -- EC/1275/2008, EU/801/2013  
And are produced under a quality scheme at least in conformity with ISO 9001 or CENELEC Permanent Documents  
(Et sont fabriqués conformément à une qualité au moins conforme à la norme ISO 9001 ou aux Documents Permanents CENELEC)  
Only for R&TTE products:  
Telefication / 0560  
(Name and number/ nom et numéro)  
Expert Opinion  
The Notified Body:  
(L’Organisme Notifié)  
performed:  
(a effectué)  
132114018/AA/01  
(certificate number / numéro du certificat)  
and issued the certificate:  
(et a délivré le certificat)  
Eindhoven, 11.09.2014  
Matthias Pyroth, Director of Consumer Care  
(place,date / lieu, date)  
(signature, name and function / signature, nom et fonction)  
 
Specifications are subject to change without notice  
2014 © WOOX Innovations Limited.All rights reserved.  
Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V.  
and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V.  
HTL9100_12_UM_V5.0  
 

Pelco Home Security System C1005M G User Manual
Pelco Security Camera 2 C1696M A 7 08 User Manual
Philips Car Video System BDL3231 User Manual
Philips CD Player AX2412 User Manual
Philips Cell Phone CT1628 User Manual
Philips Cordless Telephone SE140 User Manual
Philips Home Security System SBCSC490 User Manual
Philips Network Card TDA8002C User Manual
Powerware Network Card SOLA 4000 User Manual
Precor Treadmill C954i User Manual