8” Portable DVD Player
PDV-0821T
Operation Manual
- 1 -
Important Safety Instructions
The lighting flash with arrowhead symbol,
alertstheuserto“dangerousvoltage”which
could cause electric shock.
the point where they exit from the
machine.
8. Only use attachments/accessories
specified by the manufacturer.
The exclamation point indicates to the
user to read important operating
and maintenance instructions in the
manual.
9. Useonlywithcart,stand,tripod,bracket,
or table specified by manufacturer, or
sold with product. When cart is used,
use caution when moving cart/product
combination to avoid tip-over injury.
10. Unplug the product during lightning
stormsorwhenunusedforlongperiods
of time.
1. Readandheedalltheseinstructionsand
warnings,keepthemanualbookforfuture
use.
2. Do not operate the product near water
or expose it into rain or moisture.
3. Clean only with dry cloth, and do not
block any ventilation openings or holes.
Install according to the manufacturer’s
instructions.
11. Servicing should be referred to qualified
service personnel and is required when
producthasbeendamagedinanyway,
such as; damaged power-supply cord
or plug, objects have fallen into the
product, exposed to rain, moisture or
spills, item was dropped or doesn’t
operate normally.
4. Maintain well-ventilated conditions
around the product, avoiding heat. Do
notputproductonbed,sofaoranything
that blocks ventilation.
5. Do not install near any heat sources
suchasradiators,heatregisters,stoves
or other apparatus including amplifiers
that produce heat.
12. Do not expose product to dripping or
splashing.Objectsfilledwithliquids,such
as vases, should not be placed on the
product.
6. Must be plugged into a polarized or
grounding type plug. A polarized plug
hastwobladeswithonewiderthanthe
other. A grounding type plug has two
bladesandathirdgroundingprong.The
widebladeorthethirdprongisprovided
foryoursafety.Iftheprovidedplugdoes
not fit into your outlet, consult an
electricianforreplacementoftheobsolete
outlet.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. DANGER:Visiblelaserradiationwhenopen
andinterlockfailedordefeated.Avoiddirect
exposure to beam.
3. CAUTION: Do not open the top cover.
Therearenouserservice-ablepartsinside
the unit. Leave all servicing to qualified
service personnel.
7. Protectthepowercordfrombeingwalked
on or pinched, particularly the plugs,
convenience receptacles, and
- 3 -
Precautions with Moisture
Under the following circumstances, moisture may appear on the lens of the product,
which is the most sensitive part of the DVD player:
•
•
The DVD player is suddenly moved from a cold place to a warm place.
A room is heated while the DVD player starts operating, or the DVD is placed
by an air-conditioner.
•
•
In the hot summer season, the DVD player is moved from an air-conditioned
room to a hot, damp place to be used.
The DVD player is being operated in a damp place.
•
•
If moisture appears on the player, discontinue use.
If the player is operated under said conditions, or the disc is loaded, certain
interior components could be damaged.
•
Take disc out, plug power in and power up the DVD player for two to three
hours to let it dry.
- 4 -
Function Features
1. EXCELLENT SOUND
8. ON-SCREEN DISPLAY
On-screen displays in your choice of
English/Spanish/French.
Dolby Digital output for great sound.
2. HIGH RESOLUTION
9. AUDIO OUT
MPEG2decodingformatachievesmorethan
500 lines of horizontal resolution.
3. SPECIAL FUNCTIONS
Analogaudiooutputandopticaldigitalaudio
outputs give you more listening options.
10. EARPHONE OUTPUT
Supports multi-angle, excessive language
caption.
Letsyoulistentomoviesor music without
disturbing others.
4. COMPATIBILITY
11. REVOLVING LCD SCREEN
Turn the screen 180 degrees and then flip
it down so the screen is facing up like
a picture – ideal for viewing while it’s in
your lap!
Plays DVD, CD, CD-R, CD-RW, MP3 and
Picture CD discs.
5. PARTICULAR PERFORMANCE
Multi-speed, fast forward, fast backward,
slowplayandstepplayback,repeatplayback
and programming playback.
12. SWITCHING POWER ADAPTER
The supplied adapter automatically adapts
to the voltage requirements in nearly any
country.
6. SEARCH BY TIME
Search for a certain time on a disc.
7. LAST MEMORY PLAYBACK
It remembers where you last stopped.
DVD players and discs are coded by region. These regional codes must match the
discs they play. If the codes don’t match, the disc won’t play.
This player’s code is region 1.
This product incorporates copyright protection technology that is protected by
methodclaimsofcertainU.S. patentsandotherintellectualpropertyrightsowned
byMacrovisionCorporationandotherrightsowners.Useofthiscopyrightprotection
technology must be authorized by Macrovision Corporation, and is intended for
homeandotherlimitedviewingusesonlyunlessotherwiseauthorizedbyMacrovision
Corporation. Reverse engineering or disassembly is prohibited.
- 5 -
Screen and main panel
Unit drawing
1. Power switch
2. Disc tray cover
3. Open
15. BRIGHT up/down
16. Speaker
17. Rotate button
Opens the disc tray
4. Remote sensor
5. Direction buttons
Selects menu items
6. ꢀPrev skip button
Skips to previous chapter/track.
7. ꢁNext skip button
Skips to next chapter/track.
8. ENT button
Rotates the screen picture
18. LCD screen
19. Latch hook
20. COLOR up/down
Adjusts the screen colors
21. MODE button
Presstotogglebetween3display
sizes: normal (4:3), widescreen
(16:9), and widescreen stretched
(16:9).
Confirms selections
9. AUDIO button
22. LCD Screen
Choose AUDIO languages
10.STOP button
Stops play back
11.PLAY/PAUSE button
12.MENU button
20” TFT LCD Screen can be rotated
180 degrees and folded flat (Refer
to Page 25 for details).
13.Title button
Displays DVD titles
14. INFO button
Press for detailed information.
Keep pressing to retreat.
- 6 -
Screen and main panel
Right side
1. Earphone volume adjusting knob
Used to adjust the earphone and speaker volume.
2. Earphone jack
HI-FI earphone output (turn down the speaker volume when connecting)
3. Audio/output/input and optical digital output jack
4. Video output/input jack
5. Switch position between AV ‘IN’ and AV ‘OUT’
IN means the player is in audio and video input mode.
OUT means the player is in normal playback mode.
6. Direct current 12V input jack
Left side
1. Earphone jack
- 7 -
Remote Control
1. PWR button
4. Direction buttons
Press to select menu items.
5. ENTER button
Press to enter standby mode.
2. INFO button
Press for detailed information on disc.
Pressagaintoremoveinformationfrom
screen.
Press to confirm items or setting.
6. SETUP button
PresstoaccesstheDVDplayer’ssetup
menu.
3. TITLE button
Press to display CD titles (if present)
Press again for random play
7. 0-9 number buttons
Selects track numbers
.
- 8 -
Remote Control
8. ꢀ PREV SKIP button
Presstoenterbeginningofcurrenttrack.
Press again for previous track.
9. ꢁ NEXT SKIP button
Press to go to next chapter.
10. SUBT button (DVD use)
Press to select a subtitle language
or to turn subtitles off.
17. STOP button
Press once to stop playback
Press PLAY button to resume
Press STOP twice to stop playback
completely.
18. PLAY button
Press to begin playback.
19. GOTO button
11. ANGLE button (DVD use)
Pressto access various camera angles
(when available on your DVD)
12. A-B button
Presstoselectthedesireddiscstarting
time, track or title.
20. +10 button
Select numbers greater than 9 by
pressing the (+10) button first, then an
additional number.
Press to mark a segment to repeat
between A and B.
13. ZOOM button
21. ꢂ FWD SCAN button
Press to search forward.
22. ꢃ REV SCAN button
Press to search backward.
23. SLOW button
Press to cycle through zoom function.
14. REP button
Press to repeat a chapter, track, title,
or all content.
15. MENU button
For slow forward or slow rewind.
24. AUDIO button (DVD use)
Press to access available audio
languages
Press to select the disc menu.
16. PAUSE button
Press to pause playback.
Press PLAY button to resume.
- 9 -
Connections
Connecting to a TV
Audio/video connections
Always ensure that the DVD player, TV and any other electrical equipment that you are
connecting to the DVD player is turned off and unplugged from the power supply.
The easiest way to connect the DVD player to a television is via the supplied Audio/Video
connections. Connect the audio/video cable from the DVD player to the TV’s audio/video
inputs.
Connecting to an Amplifier with Dolby Digital Decoder
The DVD player can be connected to an AV amplifier with a Dolby digital decoder via
theDigitalOpticaloutput. PleaserefertoyourAudioequipment’smanualbeforeconnecting.
- 10 -
Playback Preparations
Using the Remote Control
1. Refer to the drawing, take the back cover off of the remote control and remove
the empty battery receptacle.
2. Prior to shipping, a separating film was applied to the battery. Remove this film.
3. Insert the battery into the receptacle and insert the receptacle into the remote.
4. For best results, aim the remote directly at the player’s receiving window. Stay
within 15 feet and angles of 60 degrees or less.
5. Under normal use the battery will last for one year.
6. Remove battery during storage or when you aren’t using the DVD for long periods
of time.
- 11 -
Playback Preparations
Disc Formats Supported by this Player
PLAYBACK TIME/
PLAYABLE SIDES
DISC LOGO
DIAMETER
133 min (SS-SL)
242 min (SS-DL)
266 min (DS-SL)
484 min (DS-DL)
41 min (SS-SL)
12cm
DVD
75 min (SS-DL)
8cm
82 min (DS-SL)
150 min (DS-DL)
12cm
74 min
CD
8cm
20 min
MP3
12cm
600 min
The operating method of some DVD discs is specified by the software maker. Please
refer to the instruction manual of the disc.
The DVD Player will play most recordable (CD-R) or erasable (CD-RW) CDs, but playback
of CD-R or CD-RW discs created on a computer requires proper formatting and finalization
of the disc for audio playback. Some computers and/or software programs may not be
capable of creating compatible discs.
Disc Terminology
Title
Generally, pictures or music compressed on a DVD are divided into several sections,
called “titles”.
Chapter
Some discs break titles into smaller story sections called chapters. Usually, chapters are
numbered so they can be found easily during a search.
Track
A picture or music segment on a CD. Each track is numbered so it can be found easily
during a search.
- 12 -
Playback Preparations
Using the Power Adapter
The DVD player is powered via the switching power adapter or the battery pack (both
are included). Directions for connections are found below:
1. Connect the AC adapter to the DVD player in the slot marked “Power In”.
2. Connect the rabbit joint end of the AC adapter to the power cord.
3. Plug the two-prong end of the power cord to a grounded electrical socket.
4. When you want power down, turn off the player’s power off first, then unplug the
power supply to prevent malfunctions.
Operation
1. Make your power connections.
2. Lift up the screen on the DVD player.
3. Switch “POWER” to the “ON” position.
4. Adjust the volume with the “VOLUME” adjust knob (also adjusts earphone volume).
5. Press the “Open” button to open the disc tray cover.
6. Put disc into the tray house with the printed side up.
7. Gently push down and close the disc cover.
- 13 -
Power Supply
Using and Charging the Battery Pack
Charge the Battery Pack before using it the first time. Charging time is normally about
4 hours. Do not charge the Battery Pack more than 8 hours as it could reduce service
life. Normally, the Battery Pack can be charged approximately 300 times. When fully
charged, the Battery Pack delivers 2.5 hours of continuous power.
Battery Pack should be fully charged before initial use!
1.Attaching the Battery Pack
Turn the player upside down on a smooth, clean
surface. Direct the battery so that the battery
contactsandthefiveplastictabsarealignedwith
the matching contacts and tab recesses on the
player.
2.Lock the Battery Pack to the Player
With one hand on the player to prevent it from
moving, push the battery pack on to the player
then slide the Battery Pack toward the front of
the Player until you hear it click and lock into
place.
3.Charging the Battery Pack
3
Plug the Power Adapter into the Player’s DC-IN
12 V Jack (located on Right Side of Player). Plug
theotherendofthePowerCordintoahousehold
wall Power Outlet.
Recommended Recharging and Charging Times
Your new battery should be fully charged before it is used for the first time. Charging
timeisnormallyabout4hours. Afullychargedbatterydelivers2.5hoursofuse. Therefore,
we recommend that you only charge the battery when the battery is down to its last
hour of charge or completely out of power. Unnecessary charging of the Battery Pack
will reduce service life. When the Battery Pack is being charged, the battery indicator
will turn red. After charging is complete, the red light will turn to green.
- 14 -
Power Supply
Detaching the Battery Pack
Detaching the Battery Pack from the unit:
If the player is not going to be used for a long period of time, we recommend that
you detach the Battery Pack. Even if the unit is powered down, the unit is still consuming
some power in STANDBY mode. This could lead to over discharging the battery. Make
sure the power is turned off before detaching the Battery Pack. After detaching the battery
pack, take care when handling the unit.
1.Slide and hold in position.
Press the tab towards the front of the unit. Hold
the tab in the up position.
2.Taking off the Battery Pack
Gently slide the Battery Pack toward the back of the
Unit. Carefully lift the Battery Pack from your player.
Using a Car Adapter
You can use Car Adapter while in a vehicle:
Connecting the Car Adapter Power Plug into the unit’s
Power Jack and the other end to the Vehicle Cigarette
Lighter Socket:
Quick Tips
● Do not operate the unit or view video software while driving a vehicle.
● Place the unit in a secure position for viewing.
● Do not leave battery attached when using car adaptor as power supply.
● Do not play a DVD while using the car adaptor to charge the battery.
Using Headphones
Using Headphones while you are in a quiet area:
Connecting Headphone Connector into right side of the
unit’s Headphone Jack:
Quick Tips
● Excessive loud usage of headphones could damage your hearing.
● Turn down the Volume before you connect the headphones, then raise the volume
to suit your level.
● Sound from the unit’s external speaker will cease when headphones are connected.
- 15 -
Power Supply
About Rechargeable Battery
Your portable DVD player comes with a lithium ion rechargeable battery that attaches
to the bottom of the player.
Rechargeablebatteryproperties:7.4Volts, withacapacityof4200mAh, interiorlithiumionic
electric circuit protection for recharge and discharge.
• If the battery is not used it will automatically discharge gradually within one month.
• If the battery loses power during play, stop playing the DVD, otherwise damage
may occur.
Working conditions and precautions:
• Battery should only be used and charged when temperatures are between 32-95F.
• Never put the battery in fire or water.
• Do not expose the battery to high temperatures or store in hot, sunny places.
• Maintain well-ventilated conditions around the product, avoiding heat.
• Don’t put the product on bed, sofa or anything that may block ventilation to the
product.
• Don’t use metal to link positive pole to negative.
•
•
Do not open the battery.
Do not leave battery attached when using alternative power source such as car
adaptor.
•
Detach battery when not in use.
- 16 -
Play DVD
Please read these instructions carefully before using your DVD player for the first
time.
1. Turn on the player’s power by switching the POWER switch on the side of the
player to “ON”.
2. Press OPEN button on front panel to open the disc cover.
3. Remove the protective lens cover.
4. Load disc with the label facing up to prevent damage to the player or disc.
5. Close the disc cover. The player will automatically search for the disc and when
it finds it, play will begin.
Warning: Do not play poor quality discs to prevent damage to the lens.
Start to Playback
1. Press the PLAY button on the remote control.
2. Press ꢄꢅꢆꢇ(direction button) or the number buttons to select a scene.
3. Press ENTER or PLAY button to start playback.
Pause
1. Press the PAUSE button on remote to pause.
2. Press the PLAY button to resume normal playback.
Zoom
1. Press the ZOOM button on remote to cycle through to different zoom settings.
2. Normal – 2x – 3x – 4x – 1/2 – 1/3 – 1/4.
3. While in zoom mode use direction keys to move around to different positions
on the picture.
- 17 -
Playing a DVD
Stop
During playback, press the STOP button on the remote control to stop playing.
Press the PLAY button, then the player will play from the point where it stopped.
Mode
During playback, press the MODE button on the control panel to change the aspect
ratio on the screen.
Title Menu
1. Press the TITLE button on the remote control during payback. The title menu
will appear on the TFT screen.
2. Press ꢄꢅꢆꢇ(direction button) or the number buttons to select the title or
disc option you wish to play.
3. Press the PLAY button to start playback.
NOTE: Title and Menu are only available for DVD discs.
Previous and Next
1. Press the ꢀ PREV button on the remote control, and playback will start from
the previous track.
2. Press the ꢁ NEXT button on the remote control, and playback will start from
the next track.
- 18 -
System Setup
General Set-Up
Change the default settings to your own preferences.
1. Removethedisc fromtheDVDdriveandpressthe ‘SETUP’buttonontheremote
control, the settings menu will appear. It includes General Setup, Speaker Setup,
Dolby Digital Setup, Video Setup and Preference setup.
2. Press ꢄꢅꢆꢇ (direction buttons) on the remote control to select a category.
3. All the items in the category will appear on the TV screen. Press the ‘ENTER’
button to confirm your selection.
Category
1. When you enter a category all the items under this category will appear, and
the items placed in the middle (or highlighted) will be the current set up.
2. Pressꢇ (rightdirectionbutton)ontheremotecontroltoselectthecorrectcategory.
3. Press the direction button to select your preference. The item you select will
be highlighted.
4. Press the ‘ENTER’ button for confirmation.
5. Press ꢄ(left direction button) to enter the other setup menu.
General Setup
The general setup is shown as follows:
TV Display
Select Normal/PS or Normal/LB when a 4:3 TV is connected.
Select Normal/PS, when playing a wide screen picture, the left and right edges
will be cut off. Select Normal/LB, display images with marking bars above and below
the picture.
Angle Mark
If the scene was shot from multiple angles, then you can easily change the camera
angle of the scene you are watching. When switched on, the disc will indicate if
alternative viewing angles are available.
On Screen Displays (OSD)
TherearefivekindsofdifferentOSDlanguagesforselection.You canselectitaccording
to your preference.
- 19 -
System Setup
SPDIF Output
This item is used to set the format of digital audio. ‘SPDIF OFF’ turns off the digital
audio; ‘SPDIF/RAW’ outputs the original. For example, if the disc being played is
Dolby Digital, then the digital audio output is also Dolby Digital. Select ‘SPDIF/PCM’
when you connect with a 2 channel digital stereo amplifier.
Captions
You can choose captions on or off on screen during playback.
Screen Saver
When activated, the screen saver automatically works if there has been no operation
for a period of time.
Speaker Setup
Downmix
Select“LT/RT”inDOWNMIX,thentheplayerwilloutputmixedaudioinawayprescribed
by Dolby. Select “Stereo”, then the player will output a stereo signal.
Dolby Digital Setup
Dual Mono
The function is used to set the output mode of channel left/right, stereo and mixed
sound.
Dynamic
Usethisitemtoadjustlineardynamiccompressionratetogetdifferentsignalcompression
Video Setup
Sharpness
Use this item to adjust sharpness setting.
Brightness
Use this item to adjust brightness level.
Contrast
Use this item to adjust contrast level.
- 20 -
System Setup
Preferences
TV Type
Most countries around the world use one of the following TV broadcast standards:
NTSC, PAL and SECAM. NTSC is used in North America and many Asian countries
including Japan. PAL is used in nearly every other country. France uses SECAM.
Set your DVD player accordingly, or to be safe, set it on multi.
Audio, Subtitle, Disc Menu
These settings allow you to listen or read subtitles of a DVD in your choice of
English, Spanish or French.
Default Reset
Use this function to reset all the settings.
Version
Displays software version information.
NOTE: this menu function is not available while a disc is playing.
Audio
DVD discs contain up to 8 audio bit streams. For Example: English, French etc.
To select the audio bit stream you prefer press the AUDIO button on the remote
control during playback. The DVD player will play the next audio bit stream every
time you press the AUDIO button in succession.
NOTE: This function is only available for discs that have actually recorded several
of the audio bit streams.
- 21 -
Playback Functions
Fast Forward & Rewind
Press the ꢃ and ꢂ buttons to active fast forward or rewind.
Slow Forward & Rewind
Press the SLOW button to slow forward or rewind.
Repeat
Repeatatitle, chapterortrack. PresstheREPbuttonontheremotecontrol. Continually
pressing the REPEAT button will display a menu as follows: Chapter, Title and All.
You can temporarily mark your own section of a DVD that you would like to play
repeatedly. You do this by marking the start and the end of the section using the
A/B button. During playback press the A-B button on the remote control at the
beginning of the segment (point A) you wish to play repeatedly. Press the A-B button
again at the end of the segment (point B).
TheDVDplayerwillautomaticallyreturntopointAandrepeatplaybackoftheselected
segment. (A-B). To resume normal playback, press the A-B button again.
Subtitle
A DVD disc can be recorded with up to 32 subtitles.
Press the SUBT button on the remote control, the mode of subtitles will recycle
as follows: SUBTITLE 1/N: Subtitle 1 appears on the screen. SUBTITLE 2/N: Subtitle
2 appears on the screen.
SUBTITLE N/N: Subtitle N (N is the total number of subtitles that the current disc
contains) appears on the screen. SUBTITLE OFF: No subtitle.
NOTE: This function is available on DVD disc that recorded with multi-subtitles.
Angle
If the scene was recorded from multiple angles, you can easily change the camera
angle of the scene you are watching.
Press the ANGLE button on the remote control during playback. Playback will shift
to another angle. If the disc menu gives the options of angles items, you can switch
angles for viewing by pressing the number buttons on the remote control.
NOTE: This function is only available if a disc is a multi-angles recorded disc.
- 22 -
Playback Functions
Search by time
You can use the GOTO button to search by time, namely to play from a specific
time. During DVD playback, press the GOTO button once and TV screen will display
the title or chapter, then you can use number buttons to select any one of them.
Press the GOTO button twice, then you can use number buttons to input the time
you desired (hour, minute, second), and the player will play from the inputted time.
NOTE: This function is only available for DVD discs.
Resume Playback
Press the STOP button at the location if you wish to interrupt playback. The player
memorizes the location where playback was stopped.
Press the PLAY button to resume normal playback. The player resumes playback
from the location where you stopped playback. This function does not operate if
the disc is removed.
Press the STOP button twice or open the disc tray, playback will then be stop and
when PLAY button is pressed, the playback will begin from the beginning of disc.
Playing an MP3
MP3 is the third audio compression format of international standard MPEG, which
compresses the audio signal at the rate of 12:1. Using MP3 format, one disc can
record more than 600 minutes music, the sound quality is similar to that of CD
discs.
TherearemanydifferentformatsforstoringMP3songs.Usually,oneMP3discincludes
many folders (directories) and every folder includes several files (songs).
In stop status, use the LEFT/RIGHT directional navigation arrows to move cursor
to “PLAY MODE” column, and use the UP/DOWN directional navigation arrows to
select the play mode. Press the LEFT/RIGHT directional navigation arrows to confirm.
Similarly, use the UP/DOWN directional navigation arrows to select the directory you
want and press the ENTER button to enter it. Press the PLAY button to play the
song you selected. In playing status, you can use the ꢀ and ꢁ buttons to select
other songs.
NOTE: The player can only output stereo signal when playing MP3 discs.
There is no search by time and slow playback function for MP3 discs.
- 23 -
Playback Functions
Playing a JPEG
JPEG is a common picture format that has few bytes and low loss rate of picture.
Hundreds of pictures can be stored in a disc in this format. In order to realize real
digital album, use film to make ”PICTURE CD”, namely JPEG format.
OPERATION
Normal Playback
Load a JPEG disc in. After reading the disc, OSD will display the menu (the left
side is the main menu and the right side is its submenu). Use the direction buttons
and ENTER button to choose items.
Many discs have other items besides pictures.
Use left/right button to move cursor to playback mode column, use the up/down
button to confirm.
Picture Rotation
It can be operated when the picture is normally displayed. Once another picture
is selected, rotating function will not be effective.
There are four kinds of rotational modes, you can use direction button to choose:
LEFT ----- Inversion/Normal
RIGHT ----- Enantiomorphism/Normal
UP
----- Rotate up
DOWN------ Rotate down
Zoom of Picture
ZOOM button is used to turn on/off zoom and move function.
As the zoom function is turned on, use the fast forward or reverse scan button
to display relevant zoom proportion. Use the direction buttons to change and enlarge
the point of the picture ratio.
When zoom function is not available, the picture will display normally. Press the MENU
button to return to the root menu.
Press the STOP button to activate preview mode.
NOTE: Influenced by making method, some JPEG discs can only be played normally
with no rotate or zoom functions.
- 24 -
Special Features of the Revolving LCD Screen
The revolving LCD screen is one of the outstanding features about this product. You
are suggested to take the following steps for proper operation.
1.Openthescreencovertoposition(A)asshown
in left figure at which the screen is vertical
to the operation panel.
Pos A
2. Revolvingthescreenhorizontallyaboutitsaxis
in the clockwise only. The maximum revolving
degree is 180 (position C) at which you will
hear a click and the screen faces backward.
Ifyouwanttoreturntoinitialposition(A)please
revolvescreencounterclockwiseuntilitclicks.
Pos B
3.Youcanrotatethescreenverticallyfromposition
C to operation panel as indicated in left fig.
Pos C
4. Thefinalrotatingposition(positionD)atwhich
the screen facing upward and back to operation
panel.
Pos D
- 25 -
Connecting to a Gaming System
What you’ll need:
●
●
●
Two pigtailed RCA audio cables (the ones with the red and white ends)
Two RCA video cables (the one with the yellow end)
Three RCA couplers (not included)
NOTE: One set of audio and video cables are included with your portable DVD player.
Check to see if your game system also includes a set of audio and video cables.
1. Using the two pigtailed RCA audio cables and two RCA couplers, connect both
cables together making sure red goes to red and white goes to white (with an
RCA coupler serving as a bridge between each connection)
2. Connect one end of the audio cable into the Audio/Optical Out port on your
portable DVD player and the other end into the Audio/Optical Out port on your
game system.
3. Using the two RCA video cables (the ones with the yellow ends) and one RCA
coupler, connect the cables together (with the RCA coupler serving as a bridge
between the two cables)
4. Connect one end of the video cable into the Video Out port on your portable
DVD player and the other end into the Video Out port on your game system.
5. Move the AV switch on your portable DVD player to the “IN” position.
6. You are ready for action!
- 26 -
Carrying Case
Your Portable DVD Player includes a sturdy carrying bag/headrest mount for
the ultimate in portable convenience! The bag/mount is easy to attach and
fits on nearly any car or truck headrest (see photo above).
- 27 -
Care of Discs
How to hold discs
Cleaning Care
When loading or removing discs, try not
to touch their playing surfaces.
Use a soft, dry cloth for cleaning. For
stubborndirt, soaktheclothinadetergent
solution; ring well first and wipe. Use a
dry cloth to wipe it dry. Do not use any
volatile agents such as benzine or paint
thinner, as they may damage the surface
of the player.
Lens cleaner
Cleaning
Theplayer’spickuplensshouldnotbecome
dirty under normal use, but is for some
reasonitshouldmalfunctionduetosoiling,
contact your nearest WACA authorized
service center. Lens cleaners are
commercially available, but special care
shouldbeexercisedintheirusesincesome
may cause damage to the lens.
Fingerprints or other dirt on the disc may
affect sound and picture quality.
To clean your discs, use a soft clean cloth
to wipethem. If necessary, moisten a soft
cloth with diluted neutral detergent to
remove heavy dirt or fingerprints.
Donotwipeinacirculardirection(Concentric
scratchesinthediscgroovetendtocause
noise.)
Gently wipe from the inside to the outer
edge.
- 28 -
Troubleshooting
Symptom
What To Check
●
Make sure the AV IN/OUT switch on the side of the
player unit is in the OUT position for standard play.
Make sure the disc cover is closed.
Make sure a disc is loaded.
●
●
●
●
●
Make sure the disc isn’t loaded upside down.
Disc should be clean, not dirty or warped.
Player’s region code should be the same as region code
of DVD disc.
The player cannot play.
●
Haswatercondensationhasoccurred?Ifithas, remove
the disc and keep the player powered up for at least
two hours.
●
●
●
●
Make sure system connection is correct.
Make sure the speakers are turned on.
There is no sound.
Make sure the sound setup of DVD disc is correct.
If the disc is dirty or warped? Clean or replace disc.
●
●
Make TV is turned on and in correct video mode.
Make sure your system connection is correct.
There is no picture.
Poor AV performance.
●
If the disc is dirty or warped? Clean or replace disc.
●
●
●
Make sure the player is not in A-B repeat status.
Press A-B button to cancel it A-B repeat status.
If the disc is dirty or warped? Clean or replace disc.
Cannotcontinuetoplayandplay
a section repeatedly.
●
●
●
Make sure there aren’t any obstructions between the
remote control and the player.
Make sure you are pointing the remote control at the
player.
Theremotecontroldoesnotwork.
Makesurebatteriesareinsertedcorrectly(checkpolarity).
Replace weak batteries.
WARNING: Do not touch any metal objects to the battery connectors, as it will put the
battery in standby mode. To get out of standby mode please connect the battery and
portable DVD player to AC or DC power.
Other possibilities:
Staticorotherexternalinterferemaycause theplayertofunctionabnormally. Inthiscircumstance
unplug the power-supply cord from the outlet and plug it in again to reset the player so that
normal operation can resume. If you are still having problems, then please disconnect the power
and consult your service center or a qualified technician.
- 29 -
Specifications
TFT screen size
8 inches
Laser Wavelength
Video System
Wavelength: 780/650nm
NTSC
Frequency Response
Audio Signal-to-noise Rate
Audio distortion + noise
Channel Separation
Dynamic Range
20Hz～20KHz ±2.5dB
≥ 85Db
≤ -70dB （1KHz）
≥ 70dB （1KHz）
≥ 80dB （1KHz）
0.2
1.0
Analog Audio Out
Digital Audio Out
Out Level: 2V±
,
Load: 10Kς
Audio Out
Video Out
Out Level: 0.5VP-P,
Load: 75ς
Out Level:1VP-P±0.2, Load:75ς
Video Out
Unbalanced Negative
Power
AC100-240V～50/60Hz
＜25W
Power Consumption
Dimension w/o battery
Weight w/o battery
8.47” x 6.3” x 1.37”
0.95 kg or 2.09 lbs.
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential
unpublished works. © 1992 -1997 Dolby Laboratories.
All rights reserved.
1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call 01-800-400-2443.
“Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and licensed for
use on the PDV-0821T to Petters Consumer Brands, LLC.
- 30 -
|