Place a Video Call
Quick Tips for Polycom HDX Systems
Entering a Name or Number
1. Select Place a Call from the Home screen, or just
start entering the number on the remote control.
2. Enter the ISDN number, IP or SIP address, or
H.323 name. Include the dots in an IP address. To
Get onscreen help, system status, or call
statistics
Power the system on or off
enter text, press
3. Press Call on the remote control.
Using the Directory
Keyboard.
View remote control operations
Select a camera or other video
source
Store or delete camera presets
Change the display layout
Start and stop sending content
1. Press
Directory on the remote control.
Select a far-site camera or video source
2. Highlight the contact you want to call. You can
navigate to the contact or use the Search field.
Pan/tilt the camera; navigate through
menus
Select the highlighted item
Zoom the camera in or out
Mute your microphone
3. Press
Call on the remote control.
Adjust the speaker volume
Using Favorites or Recent Calls
On the Favorites or Recent Calls screen, select the
contact or press the reference number that appears
next to the contact.
Select a near-site camera or video
source
Return to the Home screen
Go to the directory
End a call
Go back to the previous screen
Using Speed Dial
To call a speed dial contact from the Home screen,
Place or answer a call
highlight it and press
Call on the remote control.
Delete letters or numbers
Display the onscreen keyboard
Using the Calendar
Display a menu of optional features
If your system is configured to use the calendaring
service, you can place calls from the Calendar screen.
1. Select Calendar from the Home screen.
2. Select the Join Now button if it appears when you
highlight the meeting.
Enter letters or numbers; move the
camera to a stored preset
Enter a dot, colon, or asterisk
Control a programmed recording
device
Answer a Call
Press
Call or select Yes using the remote control.
End a Call
1. Press
Hang Up on the remote control.
2. If prompted, confirm that you want to hang up.
|