GP218-sw
WideLine™ Ground-Support Subwoofer
Features
• Very high acoustic output capability – 140.5 dB SPL
(1m) peak
• Tight musical “punch” combined with low-frequency
extension down to 27.4 Hz
• Elegant transport and handling features including
an optional transport dolly plus soft cover and four
thoughtfully placed handles
• Premium-grade, long-excursion, high-power woofers
with 4", fiberglass voice coils, double layer spiders and
triple-roll surrounds
• 18 mm Birch ply enclosure with independent, dual
chambers and extensive internal bracing for rigidity
and solid, accurate reproduction
The GP218-sw is
a
premium, high-
vented to reduce power compression. An
Despite the extremely large amount of air
performance, rectangular dual 18" subwoofer aluminum demodulating ring is employed moving in the ports, careful attention to
designed for ground stacked use in the for low distortion.
most demanding touring or installed concert
detail has resulted in a system that is free
of port distortion “chuffing”. Ample port area
allows massive amounts of air to move freely
with minimal turbulence and the ports are
arranged so as to eliminate asymmetrical
loading of the woofers, which can result in
distortion and voice coil failure related to
rocking-modes.
The extremely musical yet powerful
applications. With an impressive combination
of punch, low-frequency extension and
musical accuracy, the GP218-sw is an ideal
companion for the acclaimed QSC WideLine
series as well as other professional sound
reinforcement systems.
performance of the subwoofer is the result of
carefully balancing the transducer selection,
cabinet volume and port tuning. The resulting
system offers plenty of “punch” while
maintaining ample extension so the musically
important and satisfying fundamentals are
For suspension in permanent installations solidly and accurately reproduced.
Like its “flyable” brother, the WL218-sw, the
GP218-sw subwoofer’s sonic performance
and output capacity are second to none.
But for those who only need the exceptional
sonic performance, without the need for
expensive rigging and flying capability –
the GP218-sw gives the exact same sonic
impact, but for a more economical price tag.
each GP218-sw subwoofer comes with a
The enclosure of the GP218-sw is constructed
total of sixteen (16) threaded M10 inserts
of premium quality birch plywood finished
(four per side).
in an environmentally friendly, waterborne,
For ground-supported applications, the
polymer finish that stands up to life on
subwoofers may be stacked horizontally using the road while also being field repairable.
their interlocking feet and recess features Extensive internal bracing is employed to
machined into the enclosure’s top panel.
eliminate acoustic losses due to panel
resonance. Further contributions to cabinet
rigidity come from vent walls constructed of
QSControl.net™/BASIS™ DSP files are
available for download. They have been
The 18" woofers incorporate a double layer
spider and triple roll surround for extended
and controlled excursion at extreme power.
The 4" voice coil is wound on a fiberglass
former to prevent deformation at high
operating temperatures and is extensively
the same plywood as the enclosure. Woofers fine tuned for use with the GP218-sw
are protected by a heavy-duty, 14 gauge, and the WL218-sw to provide optimized
powder coated steel grille and housed in performance right out of the box.
separate chambers to prevent failure of one
driver from causing damage to the other.
|