Radio Shack Watch 63 5048 User Guide

Thermometer Watch  
OWNER’S MANUAL —  
Please read before using this equipment.  
63-5048  
Thank you for your purchasing the  
7. Repeat steps 5 and 6 to preset a date  
for the alarm if desired.  
RadioShack Thermometer Watch. It  
functions as a watch with dual timekeeping,  
alarm, timer, stopwatch, and thermometer.  
8. Press ADJUST when you are finished  
setting the alarm. The alarm sounds  
about 20 seconds at the set time. Ô  
OPERATION  
SETTING THE DUAL TIME  
Remove the protective film from the display  
before use. To view the display in the dark,  
press SPLIT/RESET. The backlight turns on  
for about three seconds.  
This features allows you to view time for a  
city in another time zone. The time shown on  
the upper half of the display is the current  
local time; the time on the lower half of the  
display is the dual time. If you do not press a  
button within two minutes, the watch returns  
to dual time mode.  
SETTING THE TIME AND  
TEMPERATURE  
1. Repeatedly press  
MODE until the time,  
day, and date appear.  
Ô
1. Press MODE until DT  
appears.  
2. Press ADJUST. The  
hour digits flash.  
2. Press ADJUST. The  
second digits flash. Ô  
3. Repeatedly press or hold down ST./STP.  
to set the hour. Ô  
3. Press ST./STP. to reset the seconds to  
Ô NOTE Ô  
Setting the Time and Temperature  
zero.  
4. Press MODE to confirm.  
• Press ST./STP. to toggle between day and  
4. Repeatedly press MODE to set the hour,  
minutes, year, month, date, and  
temperature (Celsius versus  
temperature.  
5. Repeat steps 3 and 4 to set the  
minutes.  
• When you enter setting mode, the weekday  
or temperature display changes to year.  
Fahrenheit), then repeatedly press and  
hold down ST.STP. to set the digits as  
desired. Ô  
6. Press ADJUST when you are finished  
• Repeatedly press SPLIT/RESET while in  
time setting mode to select 12- or 24-hour  
time format. PM appears for a PM hour in  
12-hour time, 24H appears for 24-hour time.  
setting the dual time.  
USING THE TIMER AND  
STOPWATCH  
5. Press ADJUST when you are finished  
• You can set the year from 1985 to 2029.  
setting the time.  
• For the most accurate temperature readings,  
keep your watch away from warm surfaces.  
• If you do not press a button within about two  
minutes while in time/temperature setting  
mode, the clock returns to time mode.  
SETTING THE ALARM  
In Timer Mode  
You can set the alarm to sound daily at a  
preset time, or on a specified date at a  
preset time. If you do not press a button  
within two minutes, the watch returns to  
alarm mode.  
The timer function enables you to set a time  
to count down from (up to 23 hours, 59  
minutes, 59 seconds). If you do not press a  
button within two minutes, the watch returns  
to timer mode.  
Setting the Alarm  
The alarm sounds for about 20 seconds at the  
set time. Press any button to silence the alarm.  
Setting the Dual Time  
Repeatedly press SPLIT/RESET to select 12-  
or 24-hour time format.  
1. Repeatedly press  
1. Repeatedly press  
MODE until T’R  
appears.  
MODE until AL appears.  
Using the Timer and Stopwatch  
• In setting mode, press SPLIT/RESET to  
toggle between normal counting and  
repeated counting. Normal counting begins  
from the time you set, and counts down to  
zero. Repeated counting begins from the  
time you set, counts down to zero, then  
repeats the countdown sequence. AUTO  
appears on the display when in repeated  
counting mode.  
2. Repeatedly press  
SPLIT/RESET to turn on  
or off the alarm or  
2. Press ADJUST. The  
hour digits flash.  
hourly chime. appears for the alarm,  
i
! appears for the hourly chime. When  
the hourly chime is on, the watch beeps  
twice every hour on the hour.  
3. Repeatedly press ST./STP. to change  
the selected digits to your desired  
setting.  
• If 00:00’00 appears on the display, the clock  
will count down from 23:59’59 automatically  
after you press ST.STP.  
3. Press ADJUST. The alarm hour flashes.  
4. Repeatedly press MODE to select the  
minutes and seconds. Ô  
4. Repeatedly press or hold down ST./STP.  
to set the alarm hour.  
5. Press ADJUST to exit.  
5. Press MODE to confirm.  
6. Press ST./STP. to start your timer. To  
stop the timer, press ST./STP. again.  
6. Repeatedly press or hold down ST./STP.  
to set the alarm minutes.  
IMPORTANT  
!
!
© 2003 RadioShack Corporation.  
All Rights Reserved.  
RadioShack and RadioShack.com are trademarks used by  
RadioShack Corporation.  
If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon  
for pertinent information.  
Ô — Note  
 

PYLE Audio TV Mount PSW446F User Guide
Quatech TV Converter Box SSU2 400I User Guide
Rival Rice Cooker CKRVRCM061 User Guide
Rosen Entertainment Systems GPS Receiver DP 1001 User Guide
Rotel CD Player RCD 855 User Guide
RuggedCom Computer Hardware RP100 User Guide
Sanyo Camcorder VPC WH1 User Guide
Sanyo Security Camera VCC XZ200P User Guide
Sanyo Security Camera VDC DP7584 User Guide
Schneider Electric Switch KVM0108A User Guide