High Resolution Vandal-proof Dome Camera SVD-4600 User Guide
Before installing and operating this product,
please read this manual thoroughly.
ENGLISH
Before operating the camera, confirm the camera model and proper input power
voltage. In order to that you can understand this manual thoroughly, we'll introduce our
model description.
n SVD-4600 SERIES
• NTSC MODEL
SVD-4600(W)N
• PAL MODEL
SVD-4600(W)P
n MODEL DESCRIPTION
The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
• SVD-4600(W)X
_ _
SIGNAL SYSTEM
CAMERA COLOR
• SIGNAL SYSTEM
N → NTSC MODEL
P → PAL MODEL
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
• CAMERA COLOR
→ SILVER COLOR
W → IVORY COLOR
INFORMATION -This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING -Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
WARNING -To prevent electric shock and risk of fire hazards:
◆Do NOT use power sources other than that specified.
◆Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
Contents
Features
•
•
•
•
Precautions …………………………………………………………………… 7
Components and Accessories …………………………………………… 9
Overview………………………………………………………………………… 9
Connection ……………………………………………………………………… 10
Ultra High Resolution
Day & Night
By adopting a double-speed 410,000 pixel Sony CCD, the
camera produces clear picture quality with a horizontal
resolution of 560 TV lines for color, and 700 TV lines for B/W.
The camera identifies whether it is day or night and
automatically switches to the appropriate mode, depending on
its environment. By day, the camera switches to color mode in
order to maintain optimal color. At night, it switches to B/W
mode so as to obtain better picture definition.
n
n
n
Connecting To Monitor… ……………………………………………………………… …10
Connecting To Power…………………………………………………………………… …11
RS-485 communication control……………………………………………………… …12
Vari-focal Lens Built-in
DIS (Digital Image Stabilizer)
With built-in vari-focal lens, the camera can control the focal
distance easily from 2.8 to 10.0mm.
The DIS function compensates for any camera
movement, to produce more stable pictures.
•
Operating Your Camera …………………………………………………… 13
n
n
Menu Configuration……………………………………………………………………… …13…
Menu Setup… …………………………………………………………………………… …13…
Sub Monitor Function
Wide Dynamic Range (WDR):
…
The sub monitor function enables easy adjustment of the
camera angle within the monitoring range during its installation.
…
…
…
…
…
…
…
…
…
• LENS……………………………………………………………………………………………14…
• EXPOSURE… …………………………………………………………………………………15…
• WHITE BALANCE……………………………………………………………………………16…
• BACKLIGHT……………………………………………………………………………………18…
• SSNR………………………………………………………………………………………… 20…
• DAY/NIGHT… …………………………………………………………………………………21…
• IMAGE ADJ… ……………………………………………………………………………… 22…
• SPECIAL……………………………………………………………………………………… 24…
• EXIT…………………………………………………………………………………………… 28
By adopting a proprietary SV-IV DSP chip, the camera delivers
clear, high quality pictures even in backlight, by increasing
exposure in dark areas while decreasing it in bright areas; a
corrected image with clear details results.
IP66 Approved /
Dust & Rain Resistant
With dust and rain resistant design, the camera can be
installed ouside under building eaves or place that is
esposed to the dust and rain.
Excellent Sensitivity
Adopting a Diagonal 6mm (1/3"), highly sensitive CCD and
digital signal processing technology, it can clearly
distinguish the outline and color of a subject in an
extremely low luminance environment – even, for example,
under starlight. Since surveillance is possible in places
where the light is poor, the camera is appropriate for day
and night surveillance outdoors or on the outside of
buildings.
Miscellaneous Functions
SYNC(INT/LL), SENS-UP, FREEZE, FLIP(H/V-REV),
D-ZOOM, SHARPNESS, MOTION DETECTION and
PRIVACY functions are provided.
•
•
•
Troubleshooting …………………………………………………………… 29
Specification………………………………………………………………… 30
Dimension …………………………………………………………………… 30
RS-485 Communication
Control Support
- 0.00004 Lux
Remote OSD menu control via an RS-485 interface is supported.
SSNR (Samsung Super Noise
Reduction) Function
OSD
The camera control is convenient by using 9 different
foreign language O.S.D.
- NTSC : Korean, English, Spanish, Japanese, French, Portuguese
- PAL : English, French, German, Spanish, Italian, Chinese, Portuguese
The high performance SV-IV DSP chip
dramatically reduces the gain noise in digital
image processing, producing clear, sharp images
in low lighting environments.
COLOR CCD CAMERA
COLOR CCD CAMERA
User Guide
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.
4
5
Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to provide
customers with more environment-friendly products.The Eco mark represents
Samsung Techwin’s will to create environment-friendly products, and indicates
that the product satisfies the EU RoHS Directive.
Precautions
Do not install the camera in
extreme temperature conditions.
Do not install or use the camera in an
environment where the humidity is high.
Warnings & Cautions
This information is provided to ensure your safety and to prevent any losses, financial or
otherwise. Please read it carefully and use the product accordingly.
* For product inquiries, please contact the retail shop where you bought the camera. The use of equipment such as
an aerial ladder while providing after-sales service shall be at your expense.
* Separate the power plug when thunder crashes or lighting flashes.
* This product is support equipment for surveillance system. Therefore, we can't compensate for material loss and/or
personal injuries by robbery, fire, natural disaster or something like this type.
Only use the camera under conditions
where temperatures are between
-10ºC and +50ºC. Be especially careful
to provide ventilation when operating
under high temperatures.
It can cause the image quality to be
poor.
Warning/Attention/Special Mark Messages
Ignoring this information may
Ignoring this information may
result in material loss and/or
result in material loss and/or a
serious personal injuries including
slight injuries.
death.
Do not install the camera under
unstable lighting conditions.
Do not touch the front lens of the
camera.
Indicates “Never Allowed.”
Indicates “No Disassembling.”
Severe lighting change or flicker can
cause the camera to work improperly.
It is one of the most important parts of
the camera. Be careful not to be
stained by fingerprint.
COLOR CCD CAMERA
COLOR CCD CAMERA
User Guide
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.
6
7
Precautions
Components and Accessories
❶…
2
3
4
5
Do not drop the camera or subject
them to physical shocks.
Never keep the camera face to
strong light directly.
6
7
❶
5
2
6
3
4
SVD-4600……
Wrench
Instruction Manual……
M5 Tapping Screw 4EA……
Quick Install Guide…………
7
…Installation Video Output Cable
…
Template
…
…
It can cause malfunctions to occur.
It can damage the CCD.
Overview
Do not expose the camera to
radioactivity.
3…
⓫…
⓬…
1… 2…
If it is exposed to radioactivity, For
heated CCD, it will be out of order.
5… 4…
Notes
• If the camera is exposed to spotlight or object reflecting strong light, smear or
blooming may occur.
8…
7…
6…
• Please check that the power satisfies the normal specification before connecting
the camera.
❿…
9…
COLOR CCD CAMERA
COLOR CCD CAMERA
User Guide
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.
8
9
Overview
Intermediate End monitor
❶
Pan Base
:
control panning angle of camera
Rotate Base control rotating angle of camera
X3.6 Vari-focal Lens Module
Rotate Base Holding Screw
Pan Base Holding Screws (Color : Silver)
2
3
4
5
6
7
9
:
:
fix rotated position
fix panned position
:
RS-485 Control Cable
Power Input Jack
Function Setup switch
:
The detailed description refers to p12
8
…
Video Output Jack
CCTV Camera
:
display the menu on the screen and move the cursor to four
directions to confirm status or after changing a selected item.
Connecting to Power
❿
⓬
⓫
Dome Cover
Video Output Terminal to Monitor
Shield Case
…
Connect the adaptor to the power input
connector as shown in the figure below.
The recommended adaptor specification
for SVD-4600 is AC 24V / 500mA or DC 12V
/ 500mA.
power input terminal
Connection
Connecting to Monitor
Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.
When the resistance value of copper wire is at [20ºC(68°F)]
Copper wire size (AWG)
Resistance (Ω / m)
#24(0.22㎟)
0.078
#22(0.33㎟)
0.050
#20(0.52㎟)
0.030
#18(0.83㎟)
0.018
Voltage Drop (V/m)
0.078
0.018
0.011
0.006
• As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an
excessively long adaptor output line for connection to the camera may affect the
performance of the camera.
CCTV Camera
Monitor
*Standard voltage for camera operation : DC 12V 10%,AC 24V 10%
*There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
• As the connecting method varies with the instruments, refer to the manual supplied with the
instrument.
• If necessary, you can connect the monitor to the REMOTE jack on the back of your camera.
• Only connect the cable when the power is turned off.
Notes
• Be sure to connect power only after all the installation is complete.
• Use the UL listed, class 2 power transformer of AC 24V adaptor.
• Ground should be connected to the GND terminal.
• Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate device.
COLOR CCD CAMERA
COLOR CCD CAMERA
User Guide
11
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.
10
Connection
Operating Your Camera
Menu Configuration
RS-485 communication control
Setup Menu
Connecting to RS-485 Control Cable
●
DC
SHUTTER
RETURN
ATW
OUTDOOR
LENS
●
●
…
…
●AGC…………………
●
SENS-UP………
CONTROL CABLE
RED (TRX+)
WHITE(TRX-)
SPEC
EXPOSURE
RS-485+
RS-485-
●
●
…
●
MANUAL
…
●AWC→SET
…
WHITE BALANCE
BACKLIGHT
…
● INDOOR
●
●
…
OFF
●
●
●
WDR
BLC
Using a RS-485 communication, it will be able to control the OSD menu at the
SAMSUNG TECHWIN System Controller or DVR.
(1) The case which it controls from the PC
Using a RS-485 converter, It connects to RS-485 control cable outside camera
and serial cable
HLC
●
●
…
ON
●
SSNR
OFF
…
●
B/W
…
DAY/NIGHT
COLOR
AUTO
●
●
…
● ………
V-REV
●
…
H-REV
IMAGE ADJUSTMENT
(IMAGE ADJ.)
FREEZE
EX) SERIAL PORT OF THE PC(COM1)
CONTROL CABLE
→
SERIAL CABLE
→
RS-485 CONVERTER
→
RS-485
…
●
………… ●
D-ZOOM
SHARPNESS
RETURN
●
●
●
…
●
………
●
●
●
CAMTITLE
SYNC
……
MOTION DET
(2)The case which it controls from the DVR or System Controller
It connects the RS-485 control cable in the connection terminal of 485 control
boards which are connected with the DVR or System Controller.
…
●
DIS
…
SPECIAL
EXIT
PRIVACY
COMM ADJ
…
●
RESET
…
LANGUAGE
RETURN
485 Control Board Connection Port
(+) CONNECTION TERMINAL
RS-485 Control Port
RED (TRX+)
Menu Setup
(-) CONNECTION TERMINAL
WHITE (TRX-)
* RS-485 Communication establishment initial value
Use the Function Setup switch on back of the camera.
Item
Camera ID
1
BAUD RATE
UART MODE
8-NONE-1
RET PKT
ENABLE
Function Setup switch
Initial value
9600
Notes
• When you construct external control systems for a camera control, please use to the SAMSUNG
TECHWIN PROTOCOL or PELCO-D PROTOCOL.
• When you connecting to RS-485 control cable, please peel off the outer skin inside the RS-485
control cable.
• In case of SCC-101 connection, change communication mode to
『8-E-1』
at『Communication
configuration menu. (For more information, refer to SCC-101 manual.)
』
COLOR CCD CAMERA
COLOR CCD CAMERA
User Guide
13
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.
12
Operating Your Camera
DC : Select Auto Iris Lens
1. Press the Function Setup switch.
• Main setup menu is displayed on the monitor screen.
• When DC is selected, you can control screen
brightness. The range of brightness control is
between 1 and 70. Adjust the brightness
appropriately for optimal screen brightness.
MAIN SETUP
Select the function by moving
Change the status by
moving right or left
direction of function setup
switch.
1.LENS
DC
up or down direction of
function setup switch.
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
ATW
OFF
ON
EXPOSURE
6.DAY/NIGHT
7.IMAGE ADJ
8.SPECIAL
9.EXIT
AUTO
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
2. Select a desired function using the Function Setup switch.
• Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
1.When the SETUP menu screen is displayed, select
'EXPOSURE' by using the Function Setup switch so that
the arrow indicates 'EXPOSURE'.
4.To finish the setting, select ‘EXIT’ and press the Function Setup switch.
Notes
2. Select a desired mode using the Function Setup switch.
• An item with the icon also has sub menus. To select a sub menu, select an item
with the icon and press the Function Setup switch.
• An item with the - - - icon is unavailable due to function settings.
SHUTTER : Because of using a DC lens, the shutter speed is fixed.
(NTSC mode l: 1/60 sec, PAL model : 1/50 sec)
When flickering occurs on the screen, select the A.FLK mode using the
Function Setup switch.
- A.FLK : Select this when you experience picture flicker, which can happen when there is a
clash with the frequency of the installed lighting.
LENS
Using this function, you can control screen brightness.
1.When the SETUP menu screen is displayed, select 'LENS' by using the Function
Setup switch so that the arrow indicates 'LENS'.
Notes
• To produce better results with A.FLK, do not use it in conjunction with the WDR
mode of the BACKLIGHT menu.
MAIN SETUP
1.LENS
DC
• When the SHUTTER is set to A.FLK mode, SENS-UP will be disabled.
2.EXPOSURE
COLOR CCD CAMERA
COLOR CCD CAMERA
User Guide
15
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.
14
Operating Your Camera
AGC (AUTO GAIN CONTROL) :
The higher the gain level, the brighter the screen - but the higher the noise.
- OFF : Deactivates the AGC function.
- LOW :Allows automatic gain control from 5.3dB to 30dB.
- HIGH :Allows automatic gain control from 5.3dB to 42dB.
SENS-UP :
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
ATW
OFF
When it is night or dark, the camera automatically detects the light level and
maintains a clear picture if this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO :Activates the SENS-UP function.
＊ Select one of the following 5 modes, as appropriate for your purpose.
ATW : Select this when the color temperature is between 1,800ºK and 10,500ºK
INDOOR : Select this when the color temperature is between 4,500ºK and 8,500ºK.
OUTDOOR : Select this when the color temperature is between 1,800ºK and 10,500ºK.
(sodium light inclusion)
AWC →SET :To find the optimal setting for the current luminance environment in this
mode, set the point the camera towards a sheet of white paper and press
the Function Setup switch. If the environment changes, readjust it.
RETURN :
MANUAL : Select this to fine-tune White Balance
manually. Set White Balance first by using the
ATW or AWC mode. After that switch to
MANUAL mode, fine-tune the White Balance
and then press the Function Setup switch.
Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.
Notes
• If you press the Function Setup switch in ‘AUTO’ mode, You can adjust brightness by
increasing or decreasing the shutter speed. (x2 ~ x256)
• Note that the higher the zoom level, the brighter the screen, but the more likely it is
that an after-image will appear.
• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation
when the zoom level is increased, this is normal.
Notes
• White Balance may not work properly under the following conditions. In this case
select the AWC mode.
❶
……When the color temperature of environment surrounding the subject is out of the
White Balance (White Bal.)
control range (e.g. clear sky, or sunset)
…When the ambient illumination of the subject is dim.
…If the camera is directed towards a fluorescent light or is installed in a place
where illumination changes dramatically, the White Balance operation may
2
Use the White Balance function to adjust the screen color.
1.When the SETUP menu screen is displayed, select ‘White Bal.’ by using the
Function Setup switch so that the arrow indicates ‘White Bal.’ .
3
become unstable.
2. Select a desired mode using the Function Setup switch.
COLOR CCD CAMERA
COLOR CCD CAMERA
User Guide
17
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.
16
Operating Your Camera
• The WDR compensates for backlight more effectively than previous models,
by applying an optimum fusion ratio when combining the high speed shut
ter used in bright areas and the low speed shutter used in dark areas.
BACKLIGHT
This camera is designed so that it delivers a distinctive subject and background at
the same time, even when the subject is in backlight, unlike conventional cameras,
by adopting a proprietary SV-IV DSP chip.
HLC(High Light Compensation) :
If the scene contains extremely bright light areas such as; from car headlight,
the light can mask out much of the on-screen detail.
- DAY : in normal daylight conditions, the HLC is not activated.
- NIGHT : lf a high light that is larger than a certain size is present on the screen,
HLC is activated to remove the high light.
- HLC : Enable a user to select a mask color of high light area from a picture.
1.When the SETUP menu screen is
displayed, select ‘BACKLIGHT’ by using the
Function Setup switch so that the arrow
indicates ‘BACKLIGHT‘.
2. Select a desired mode using the Function
Setup switch depending on the camera
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
ATW
OFF
ON
purpose
.
BLC : Enables a user to directly select a desired area
from a picture, and to view the area more clearly.
• Select ‘BLC’ to adjust the area to be enhanced and
enhancement level.
WDR :When there are both bright and dark areas at
the same time, this mode makes both areas
distinctive.
OFF : Not being used.
3. Select a desired mode using the Function Setup switch and press the SET button.
Notes
• Since the following symptoms may occur according to the ambient illumination when
WDR is selected, set it to OFF.
WDR
OFF
❶
…Color or screen changes unnaturally.
2
…Noise appears in the bright part of the screen.
• Select ‘WDR’ to adjust the WDR LIMIT and LEVEL.
• Since the performance of the WDR function may be affected by the area of the bright part
of the screen, optimize the installation angle for the best WDR performance.
• If you increase LIMIT, the screen display may be distorted.
• In a dark environment, the HLC is only activated when a high light that is larger than a
certain area is present.
- LIMIT :Adjust the WDR Sensitivity by selecting LOW,
MIDDLE, or HIGH.
- LEVEL :Adjust the WDR Brightness by controlling the
bar from 1 to 100.
• The HLC is not activated in light or overly dark conditions.
COLOR CCD CAMERA
COLOR CCD CAMERA
User Guide
19
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.
18
Operating Your Camera
SSNR
DAY/NIGHT
You can display pictures in color or black and white.
1.When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the
Function Setup switch so that the arrow indicates ‘DAY/NIGHT’.
This function reduces the background noise in a low luminance environment.
1.When the SETUP menu screen is displayed, select ‘SSNR’ by using the Function
Setup switch so that the arrow indicates ‘SSNR’ .
MAIN SETUP
MAIN SETUP
1.LENS
DC
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
ATW
OFF
ON
ATW
OFF
ON
6.DAY/NIGHT
AUTO
6.DAY/NIGHT
7.IMAGE ADJ
AUTO
2. Select a desired mode using the Function Setup switch.
OFF : Deactivates SSNR. Noise is not reduced.
ON :Activates SSNR so that noise is reduced.
2. Select a desired mode using the Function Setup switch according to the picture
display you want.
3. Set the SSNR mode to ‘ON’ and press the Function Setup switch. Then you can
adjust the noise reduction level.
COLOR :The picture is always displayed in color.
B/W :The picture is always displayed in black and
white. Please press SETUP button to turn on
or off the burst signal on B/W mode.
AUTO :The mode is switched to ‘Color’ in a normal
environment, but switches to ‘B/W’ mode
when ambient illumination is low.To set up
the switching time or speed for AUTO mode,
press the Function Setup switch.
Notes
• You cannot set the SSNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE
menu is ‘OFF’.
- DWELL TIME :You can select the duration time about
changing the day/night mode.
• When adjusting the noise reduction level of the SSNR mode, remember that the
higher the level set, the more the noise level will be reduced but that after image
may also occur.
→ 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
- DURATION :You can select brightness of illumination about changing the
day/night mode.
COLOR CCD CAMERA
COLOR CCD CAMERA
User Guide
21
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.
20
Operating Your Camera
Color →…B/W B/W →…Color
IMAGE SETUP
1. V-REV
2. H-REV
Fast
Slow
2.5 lux
4 lux
6 lux
* The brightness of illumination is changeable
by installed environment.
OFF
OFF
OFF
ON
0.8 lux
3. D-ZOOM
EXTERN :This mode allows you to apply a desired filter to external signals.
4. SHARPNESS
5. PED LEVEL
6. RETURN
0
Notes
•
You cannot control the DAY/NIGHT menu when AGC in the EXPOSURE menu is ‘OFF’.
At this time, the exchange between DAY mode and NIGHT mode operates as like
selecting ‘COLOR’ mode.
FREEZE :You can view still or moving pictures.
V-REV :You can flip the picture vertically on the
• The OSD key does not work for 3 seconds when switching to Color or B/W, to
ensure stable camera operation.
screen.
H-REV :You can flip the picture horizontally on
•
The camera may focus less well under infrared illumination than under normal illumination.
the screen.
D-ZOOM :You can use a digital zoom of x2~x10.
IMAGE ADJ.
SHARPNESS :
1.When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by using the
Function Setup switch so that the arrow indicates ‘IMAGE ADJ.’
As you increase this value, the picture outline
becomes stronger and clearer.Adjust this value
appropriately depending on the sharpness of
the picture.
MAIN SETUP
PED LEVEL : Please use this menu item when
using a LCD monitor other than
standard ones.You can change
PED LEVEL.
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
ATW
OFF
ON
RETURN : Select this to save the settings for the IMAGE ADJ. menu and to
return to the SETUP menu.
6.DAY/NIGHT
7.IMAGE ADJ
8.SPECIAL
AUTO
Notes
• When the V-REV or H-REV mode is enabled, the text on the screen does not flip.
• If you increase the SHARPNESS level too high, the picture may become distorted or
noise may appear.
2. Select a desired mode using the Function Setup switch.
COLOR CCD CAMERA
COLOR CCD CAMERA
User Guide
23
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.
22
Operating Your Camera
Notes
SPECIAL
SPECIAL
1. CAM TITLE
• When theCAMTITLEmenuis‘OFF’,notitle
will bedisplayedonthemonitorscreen
even if you enter one.
1.When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function
Setup switch so that the arrow indicates ‘SPECIAL’.
OFF
INT
OFF
OFF
OFF
2. SYNC
3. MOTION DET
4. PRIVACY
5. DIS
• Only English is available in this mode.
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
ATW
OFF
ON
3
…Press the Function Setup switch.
CAMERA TITLE SETUP
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-.0123456789
6.DAY/NIGHT
7.IMAGE ADJ
8.SPECIAL
9.EXIT
AUTO
←→…CLR POS END
2. Select a desired mode using the Function Setup switch.
4
…Use the Function Setup switch to move to a desired letter and select the letter
by pressing the Function Setup switch. Repeat this to enter multiple letters.
You can enter up to 15 letters.
SPECIAL
1. CAM TITLE
2. SYNC
OFF
INT
OFF
OFF
OFF
Notes
3. MOTION DET
4. PRIVACY
5. DIS
• If you move the cursor to CLR and press the Function Setup switch, all the letters
are deleted. To edit a letter, change the cursor to the bottom left arrow and press
the Function Setup switch. Move the cursor over the letter to be edited, move the
cursor to the letter to be inserted and then press the Function Setup switch.
6. COMM ADJ
7. LANGUAGE
8. RESET
ENGLISH
5…
Enter a title, move the cursor to ‘POS’ and press
the Function Setup switch. The entered title
appears on the screen. Select the position to
display the title on the screen by using the
Function Setup switch and press. When the
position is determined, select ‘END’ and press the
Function Setup switch to return to the SPECIAL
menu.
9. RETURN
FRONT DOOR
CAM TITLE : If you enter a title, the title will appear on the monitor.
❶
……If the SPECIAL menu screen is displayed, use the Function Setup switch so
that the arrow indicates ‘CAM TITLE’.
2
…Set it to ‘ON’ by using the Function Setup switch.
COLOR CCD CAMERA
COLOR CCD CAMERA
User Guide
25
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.
24
Operating Your Camera
SYNC : In areas where the supply is at 60Hz, you can
Notes
synchronize the output phase of multiple cameras
using the power synchronization function (Line-
Lock) without using a synchronization signal
generator.
•
•
MD areas show only MOTION DET menu. Therefore, MD areas don’t display on the
monitor screen.
When motion is detected,“MOTION DETECTION” expression is displayed on the screen.
- INT : Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
• Press the Function Setup switch.
• You can select a desired phase from 0 to 359 when select 'phase'.
• You can decide the synchronization between luminance and color signal when
select the 'Mode' to TRACE.
PRIVACY : Hide an area you want to hide on the
screen.
❶
……When the SPECIAL menu screen is displayed,
press the Function Setup switch so that the
arrow indicates ‘PRIVACY’.
Notes
2
…S…et up the mode using the Function Setup
•
When using AC power at 60Hz frequency, you can use the L/L type synchronization.
• When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.
switch.
- AREA SEL :You can select up to 8 PRIVACY areas.
- AREA MODE : Determines whether to use the area
selected in the AREA SEL, and the
MOTION DET:
size and position of the area.
You can monitor activity more efficiently, because a
signal is generated by the camera whenever
motion is detected.
-
MASK COLOR : Determine area color. You can select Gray, Green, Red, Blue, Black,
White.
- TRANSP : Determine the transparency of selected area as controlling number
❶
……When the SPECIAL menu screen is displayed, press the Function Setup
from 0 to 3.
switch so that the arrow indicates ‘MOTION DET’.
- RETURN : Select this to save the PRIVACY menu settings and return to the
SPECIAL menu.
2
…Set up the mode using the Function Setup switch.
- SENSITIVITY :You can select up to 8 MD areas.When SENSITIVITY number is high,
motion detection sensitivity is increased to recognize even small
movement.
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- FILL → SET : Fills in a selected MD area. Fills in a selected MD area.The color of filling
is sequentially selected as brown, orange, blue, cyan, yellowish green,
yellow and red.
DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as
wind.
Notes
•
•
•
The chance of resolution decrease is existed because DIS function uses the digital zoom.
DIS doesn’t operate when background illumination is too low.
DIS doesn’t operate when object pattern is monotonic as like sky or white wall.
- RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL
menu.
• If DIS is enabled, the digital zoom is configured to less than 46 level.
COLOR CCD CAMERA
COLOR CCD CAMERA
User Guide
27
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.
26
Operating Your Camera
Troubleshooting
Refer to the following table if you are experiencing trouble with your camera.
Contact an authorized technician if the table does not provide you with a
solution to the trouble.
COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status when controlling the
camera through an external control device.
●
Nothing appears on the screen.
❶
……When the SPECIAL menu screen is displayed, press the Function Setup
▶
▶
Check that the power cord and line connection between the camera and monitor are fixed properly.
Check that you have properly connected VIDEO cable to the camera VIDEO output jack.
switch so that the arrow indicates ‘COMM ADJ’.
…Set up the mode using the Function Setup switch.
2
●
The image on the screen is dim.
▶
▶
▶
Is lens stained with dirt? Clean your lens with soft, clean cloth.
Set the monitor to proper condition.
If the camera is exposed to too strong light, change the camera position.
●
The image on the screen is dark.
▶
▶
Adjust the contrast feature of the monitor.
If you have an intermediate device, set the 75Ω/ Hi-z properly.
●
●
●
The camera is not working properly, and the surface of the camera is hot.
Check that you have properly connected the camera to an appropriate power source.
▶
The DAY/NIGHT menu does not work.
- CAM ID : Determines the camera's identification number (between 0 and 255).
- BAUD RATE :You can select 2400/4800/9600/19200/38400/57600 bps.
- UART MODE :You can select NONE, EVEN or ODD for the parity bits.
- RET PKT : Determines whether to send a command back to the controller device
when a communication control command is sent to the camera.
▶
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
The SENS-UP function does not work.
▶
▶
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ .
●
●
●
●
The Motion Detection function does not work.
- DISP CAM ID : Display camera title on top left corner of the screen.
▶
Check that MOTION DEF of SPECIAL SETUP menu is ‘OFF’.
Color is not correct.
* Initial value of communication adjustment
▶
Check the setting of WHITE BAL SETUP menu .
Item
Initial value
Camera ID
1
BAUD RATE UART MODE
9600 8-NONE-1
PET PKT
ENABLE
The screen flickers continually.
▶
Check that direction of camera turns toward the Sun.
RS-485 communication fails.
LANGUAGE :You can select the menu language according to your
▶
Check the polarity between RS-485 Control Port and RS-485 cable.
requirements.
485 Control Board Connection Port RS-485 Control Port
RESET : Resets the camera settings to the factory defaults.
RETURN : Select this to save the SPECIAL menu settings and return to the MAIN SETUP
(+) CONNECTION TERMINAL (TRX+)
( -) CONNECTION TERMINAL (TRX-)
485+
485-
menu.
▶
▶
Check the RS-485 Communication establishment initial value
* RS-485 Communication establishment initial value
Item
Initial value
Camera ID
1
BAUD RATE UART MODE
9600 8-NONE-1
RET PKT
ENABLE
EXIT
Press the Function Setup switch in the EXIT menu to save the current settings and exit the
MAIN SETUP menu.
We recommend that you make ground connect between camera and controller in order to maintain
safety communication control.
COLOR CCD CAMERA
COLOR CCD CAMERA
User Guide
29
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.
28
DECLARATION OF CONFORMITY
Specifications
Application of Council Directive(s)
89 / 336 / EEC
SVD-4600(W)N
SVD-4600(W)P
Input voltage
Power consumption
AC24V / DC12V
3.5W
Manufacturer's Name
Manufacturer's Address
SAMSUNG TECHWIN CO., LTD
SAMSUNG TECHWIN CO., LTD
42, SUNGJU-DONG CHANGWON-CITY,
KYUNGNAM, KOREA, 641-716
POWER
CCD
Size
Diagonal 6mm (1/3") Sony DS CCD
Total Pixels
Effective Pixels
Scanning System
811(H) x 508(V)
768(H) x 494(V)
795(H) x 595(V)
752(H) x 582(V)
2:1 Interlace
Sync Synchronization
Internal / Line Lock
Frequency
H : 15.734KHz / V : 59.94Hz
Korean, English, Japanese,
French, Spanish, Portuguese
H : 15.625KHz / V : 50.00Hz
English, French, Germany, Spanish,
Italy, Chinese, Portuguese
O.S.D
European Representative Name
European Representative Address
Equipment Type/Environment
Model Name
Back-light Compensation
Resolution
WDR / HLC / BLC / OFF
Color : 560 TV Lines↑ B/W : 700 TV Lines↑
52 dB (AGC Off,Weight ON)
0.001 Lux (Color Sens-up), 0.00004 Lux (B/W Sens-up) at F1.2
ATW / AWC / Manual / Outdoor / Indoor (1800°K ~10,500°K)
S/N (Y signal)
Min. Illumination
White Balance
Electronic Shutter Speed
Sens-up
Gain Control
SSNR
Motion Detection
PRIVACY
V-REV (Mirror)
H-REV (Flip)
FREEZE
SHARPNESS
IRIS Control
Day & Night
DIS
CCTV Camera
E
L
Fixed (1/60 or Flickerless Mode)
Fixed (1/50 or Flickerless Mode)
AUTO / OFF (Selectable limit x2 ~ x256)
E
C
T
R
I
C
A
L
SVD-4600P/WP
LOW/HIGH/OFF
ON / OFF (1~32 Level)
ON / OFF (8 Zone)
ON / OFF (8 Zone)
Beginning Serial NO.
S8080001
ON / OFF
ON / OFF
ON / OFF
Year of Manufacture
2008. 12. 01
Conformance to
EN 50081-1 : 1992
EMC-Directive 89/336 EEC and 92/31/EEC
EN 50130-4 : 1996
ON / OFF (Level Adjustable)
DC drive Lens
COLOR / Black & White / AUTO
ON / OFF
ON / OFF (x10)
Digital Zoom
RS-485 (2400, 4800, 9600, 19200, 38400, 57600 bps selectable)
Communication
Built-in Lens
(STW Protocol, Pelco-D Protocol available)
x3.6 Vari-focal Lens (F1.2 f2.8~10.0mm)
94.4° ~ 28°
Horizontal
Vertical
PAN
Angle of view
69.2° ~ 21°
Manual 0°~ 340°
Manual 0°~ 146°
Monitoring angle
TILT
Weather Proof
Operating
IP66
We, the undersigned, hereby declare that the equipment specified above conforms
to the above Directive(s).
-10° to +50° / 30% to 80% RH
Temperature/Humidity
Storage Temperature/Humidity
Dimension
Weight
20° to +60° / 20% to 90% RH
Ø148 x 126 mm
1.3Kg
Manufacturer SAMSUNG TECHWIN CO., LTD
Signature
Legal Representative in Europe
※ SVD-4600WN, SVD-4600WP : Ivory color base model
85mm
Signature
Full Name
Position
Place
Ø 148mm
Dimension
Full Name
Position
Place
BONJENG GU
QUALITY CONTROL MANAGER
CHANGWON, KOREA
2008. 12. 01
83.5mm
85mm
Date
Date
COLOR CCD CAMERA
COLOR CCD CAMERA
User Guide
31
User GuiDdeownload from Www.Somanuals.com. All Manuals Search And Download.
30
|