QUICK GUIDE
Colour Monitor
VMC-7314P
VMC-7321P
Please read this Instruction book before using your Monitor set.
INSTALLATION / GENERAL OPERATION
Switching-on your TV
Mains Supply
■ To turn the monitor ON, press the Mains ON/OFF
switch. The
power indicator illuminates to show the power is on.
F
AC Mains Outlet
■ To turn the monitor OFF, press the Mains ON/OFF
switch
again.
Connect the power cord of the monitor to a wall outlet.
✐ The monitor is prepared for a mains voltage AC220~240V, 50Hz.
When the monitor is not to be used for an extended period of
time, it is advisable to disconnect the power cord from the power
outlet.
Be sure to set the Mains On/Off button to the OFF
position if a power failure occurs.
If you find the power indicator flashing, please turn the
monitor off completely with the Mains ON/OFF
button and contact our service desk.
This warning is a sign to let you know that the power
protection function of this monitor is now operating.
WARNING
!
High voltages are used in the operation of this set.
Refer to qualified service personnel
AV Connection
Control selection and adjustment
F
Press the
button repeatedly to select Volume, Brightness,
Contrast, Colour, Sharpness. Press the
or
button to adjust
VIDEO IN
the selected control. When the control menu is not displayed, the
AUDIO OUT AUDIO IN VIDEO OUT
or
button enable you to switch programme position.
Volume : To adjust the sound volume.
Brightness : To adjust the picture brightness.
Contrast : To adjust the picture contrast.
Colour : To adjust the picture colour.
Sharpness : To adjust the picture sharpness.
Tint : To adjust the colour phase. (This appears when NTSC
signals are input.)
Terminal
Description
VIDEO IN
VIDEO OUT
AUDIO IN
AUDIO OUT
BNC connector for video in.
BNC connector for video out.
BNC connector for audio in.
BNC connector for audio out.
Function key
Remote sensor
Mains On / Off
switch
-/+ Button levels up
and down
Standby light
3
TV SPECIFICATIONS / WARRANTY TO CUSTOMER
TV specification
VMC7314P
VMC7321P
Monitor specification
Power source
Sound output
AC 220~240V 50Hz
PAL,NTSC
(continuous)(watts)
1.5
1.5
Colour system
Picture tube
Input terminals
Video IN
(Diagonal) (cm)
37
34
55
51
BNC connector
RCA connector
(Visible picture diagonal)
Audio IN
Output terminals
Video OUT
Audio OUT
Dimensions
BNC connector
RCA connector
(W x H x D mm)
370 x 336.5 x 379
9.0
514 x 466 x 482
19.0
Weight (kg)
Warranty to Customer
Dear Customer.
Sanyo U.K. Sales Ltd. (the company) warrants to the initial
retail purchaser that if this equipment is or becomes
defective and that, in the opinion of the Company, the defect
is due to faulty material or workmanship the Company will,
for a period of 12 calendar months from the date of sale to
the original purchaser repair or replace, at its sole option,
free of charge, any such defective component part of the
equipment, always provided that:-
Thank you for buying SANYO. This equipment should give
you many years of pleasure and faithful service but in the
event that a fault occurs, the following notes for you
guidance may be helpful:-
1: PLEASE RETAIN YOUR PURCHASE RECEIPT WHICH
WILL BE REQUIRED FOR SERVICE DURING WARRANTY.
2: If your Sanyo equipment proves faulty during the period
of guarantee, take it or send it back to the dealer who
originally supplied it together with this guarantee and the
proof of purchase. We have made arrangements with our
approved dealers under which they will carry out in
guarantee service repairs on our behalf. In this way, we
hope to reduce to a minimum the amount of time you will
be without your equipment.
3: If for some reason it is impossible to return the
equipment to the original supplier, please contact our
Service Department at the address below for further
advice.
1: The equipment has at all times been used in accordance
with the operating instructions issued by the Company,
and has not been connected to an electrical mains supply
for which it has not been adjusted.
2: Accidental damage or damage caused by negligence of
misuse by the user, is specifically excluded.
3: Unauthorised repairs, or any modification to the
equipment which has not been expressly approved by the
Company, shall render this warranty null and void.
4: Failure due to fair wear and tear of any item is specifical-
ly excluded.
4: Should the equipment require servicing after the expiry
of the guarantee period, take or send it to the original
supplier or any other Sanyo dealer. He will be pleased
to give you a quotation for the repair.
This warranty is not transferable and is only applicable with-
in the United Kingdom (and the Republic of Ireland).
Nothing in this express warranty affects the statutory
rights available to the purchaser of this equipment.
Note: This warranty supersedes any other form of
guarantee that may inadvertently have been enclosed with
or attached to the product.
Service Department,
Sanyo UK Sales Ltd.,Sanyo House,Otterspool Way,Watford,
Hertfordshire, WD2 8JX.
Tel: 01923 246363
Part No. SKP10324 C3MWW / C3LW
Printed in U.K.
|