Quick Installation Guide
TEG-160WS
1. ×òî íóæíî ñäåëàòü â ñàìîì íà÷àëå
Ñîäåðæèìîå óïàêîâêè
TEG-160WS/TEG-240WS
Ðóêîâîäñòâî ïî áûñòðîé óñòàíîâêå
Ñëóæåáíàÿ ïðîãðàììà è
ðóêîâîäñòâî ïîëüçîâàòåëÿ íà
äèñêå CD-ROM
2 êðåïåæíûå ñêîáû ñ âèíòàìè
Ñåòåâîé ïðîâîä
Âåá-áðàóçåð: Internet Explorer (5.0 èëè âûøå), Netscape (6.0 èëè âûøå)
Êîìïüþòåð ñ óñòàíîâëåííûì ñåòåâûì àäàïòåðîì
Ïðèìåíåíèå
16-Port 10/100/1000Mbps Gigabit
Web Smart Switch
(TEG-160WS)
Or
24-Port 10/100/1000Mbps Gigabit
Web Smart Switch
(TEG-240WS)
Servers with 10/100/1000Mbps
Copper Gigabit PCI Adapter
(TEG-PCITXR)
Workstations with 10/100/1000Mbps
Copper Gigabit PCI Adapter
(TEG-PCITXR)
Workstations with
10/100Mbps Ethernet Card
(TE100-PCIWN)
gigabit
1
Ðóññêèé
2. Óñòàíîâêà îáîðóäîâàíèÿ
Ïðèìå÷àíèå: Ïîñëå çàâåðøåíèÿ óñòàíîâêè îáîðóäîâàíèÿ âûïîëíèòå
êîíôèãóðèðîâàíèå óñòðîéñòâà TEG-160WS/TEG-240WS ñ ïîìîùüþ
ñëóæåáíîé âåá-ïðîãðàììû Smart. Äëÿ äîñòóïà ê òàêîé ïðîãðàììå
íåîáõîäèìî îòêðûòü âåá-áðàóçåð è ââåñòè IP-àäðåñ ïî óìîë÷àíèþ
http://192.168.0.1 è ïàðîëü ïî óìîë÷àíèþ «admin». Óáåäèòåñü â òîì, ÷òî
êîìïüþòåð è óñòðîéñòâî TEG-160WS/TEG-240WS íàñòðîåíû íà îäèí è òîò
æå ñåòåâîé ñåãìåíò.
1. Ïðèñîåäèíèòå ñåòåâîé ïðîâîä ê
òûëüíîé ñòîðîíå óñòðîéñòâà
TEG-160WS/TEG-240WS è çàòåì
ê ñåòåâîé ðîçåòêå.
2. Ïðèñîåäèíèòå ñåòåâîé êàáåëü
CAT-5 îò êîìïüþòåðà ê
èìåþùåìóñÿ ïîðòó Ethernet
óñòðîéñòâà TEG-160WS/
TEG-240WS.
2
Ðóññêèé
3. Ñëóæåáíàÿ ïðîãðàììà óïðàâëåíèÿ,
îñíîâàííàÿ íà âåá-òåõíîëîãèè
Ïðèìå÷àíèå: Ïðè íåîáõîäèìîñòè ïðîñòîãî íàõîæäåíèÿ â ñåòè âñåõ
óïðàâëÿþùèõ êîììóòàòîðîâ, ðàáîòàþùèõ íà îñíîâå âåá-òåõíîëîãèè,
íàçíà÷åíèÿ IP-àäðåñà, èçìåíåíèÿ ïàðîëÿ è îáíîâëåíèÿ âñòðîåííûõ
ïðîãðàìì äîñòàòî÷íî âîñïîëüçîâàòüñÿ ñëóæåáíîé ïðîãðàììîé Web
Management Utility. Âûïîëíèòå íèæåïðèâåäåííûå óêàçàíèÿ.
Ïîëüçîâàòåëÿì Windows
1. Óñòàíîâèòå Ñëóæåáíàÿ
ïðîãðàììà è ðóêîâîäñòâî
ïîëüçîâàòåëÿ íà äèñêå
CD-ROM â äèñêîâîä CD-ROM
êîìïüþòåðà è âûáåðèòå Install
Utility.
2. Ñëåäóéòå óêàçàíèÿì Ìàñòåðà
óñòàíîâêè. Ùåëêíèòå ïî êíîïêå
OK.
3. Âûáåðèòå Ïóñê > Âñå ïðîãðàììû
> web_management_utility,
çàòåì ùåëêíèòå ïî
web_management_utility.
3
Ðóññêèé
4. Âûáåðèòå Discovery, çàòåì
äâîéíûì ùåë÷êîì âûáåðèòå
êîììóòàòîð Switch,
ïîÿâèâøèéñÿ â ñïèñêå Discovery
List.
5. Âûáåðèòå êîììóòàòîð Switch â
ñïèñêå Monitor List è ùåëêíèòå
ïî ïàðàìåòðàì êîíôèãóðàöèè -
Configuration setting.
6. Çàäàéòå IP-àäðåñ, ìàñêó
ïîäñåòè, øëþç è ïàðîëü.
Ùåëêíèòå ïî êíîïêå Set.
4
Ðóññêèé
7. Ùåëêíèòå ïî êíîïêå OK.
8. Âûáåðèòå äîñòóï ê Âåáó - Web
access.
9. Ââåäèòå ñâîé ïàðîëü è
ùåëêíèòå ïî êíîïêå Login.
Ïîäðîáíåå î êîíôèãóðàöèè ïðîãðàììû Web-based Smart Utility è
äîïîëíèòåëüíûõ íàñòðîéêàõ ìîæíî óçíàòü â ðóêîâîäñòâå ïîëüçîâàòåëÿ íà
äèñêå CD-ROM ñî ñëóæåáíûìè ïðîãðàììàìè èç êîìïëåêòà èëè íà ñàéòå
5
Ðóññêèé
Troubleshooting
Q1: After connecting the TEG-160WS/TEG-240WS to a power outlet, the LEDs do not turn on.
A1: Check the connection of the power cord to the TEG-160WS/TEG-240WS and the power
outlet. Also check that the power outlet is receiving power.
Q2: After installing the Web-Management Utility, I clicked Discovery and the Utility is unable to
discover the TEG-160WS/TEG-240WS. What should I do?
A2: Make sure that the TEG-160WS/TEG-240WS is powered on and that all connections are
secure. Also check that your computer's IP Address is on the same network segment as the
TEG-160WS/TEG-240WS. The default IP Address of the Switch is 192.168.0.1 and the default
password is admin.
Q3: When I access the TEG-160WS/TEG-240WS using a web browser, I get a screen that tells
me “only one user can login”. What should I do?
A3: Another computer is configuring the TEG-160WS/TEG-240WS. Please wait until the user
logs off. If the other user has already logged off and you still get the same screen, then
disconnect the power cord from the TEG-160WS/TEG-240WS, wait for 5 seconds, reconnect
the power cord to theTEG-160WS/TEG-240WS, allow 5 seconds for the Switch to power on,
and then attempt to access the web configuration page to login.
Q4: I forgot the administration password. How do I reset my TEG-160WS/TEG-240WS?
A4: Press on the reset button using a pen or paperclip for 10 seconds. The default password is
admin.
Q5: When I connect a computer to the Switch's gigabit port, the LINK/ACT LED turns on, but
the 100Mbps LED remains off.
A5: When the 1000Mbps LED remains off, the computer's connection speed is 10Mbps or
100Mbps (if the 100Mbps LED is on). Make sure that you have a Gigabit Ethernet adapter
installed. Also make sure to use a CAT-5e or CAT- 6 Ethernet cable.
If you still encounter problems or have any questions regarding the TEG-160WS/TEG-240WS, please
refer to the User's Guide included on the Utility CD-ROM or contact TRENDnet's Technical Support
Department.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may cause
undesired operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority orRetailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
6
TRENDnet Technical Support
.
US Canada
Toll Free Telephone: 1(866) 845-3673
24/7 Tech Support
.
.
.
.
.
Europe (Germany France Italy Spain Switzerland UK)
Toll Free Telephone: +00800 60 76 76 67
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Worldwide
Telephone: +(31) (0) 20 504 05 35
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Product Warranty Registration
Please take a moment to register your product online.
3135 Kashiwa Street
Torrance, CA 90505
USA
Copyright ©2006. All Rights Reserved. TRENDnet.
|