i890
User’s Guide
HELLOMOTO
Introducing your new Motorola i890 wireless phone. Here’s a quick anatomy lesson.
Ready
5/10/09
Speaker
On/Off Key
Right Soft Key
Left Soft Key
Perform function
in lower left
Smart Key
Perform function
in lower right
display.
Push to Open Button
Lock
Cntacts
Message
display.
Volume Keys
Web Key
OK Key
Menu Key
From home screen,
open main menu.
PTT Button
End/Power Key
End calls, exit
Talk Key
Make &
Micro USB
Connector
menu system,
turn phone on/off.
Touch Media Keys
answer calls.
Connects charger
and accessories.
4-Way Navigation
Key
Antenna
For clear calls.
(Back side beneath battery)
1
check it out
Ready
Ready
5/10/09
5/10/09
Press and hold the
Press the Navigation Key
up, down, left or right (
to highlight a menu feature.
1
2
3
4
Contacts
Messages
Contacts
Messages
@
((
Power Key
for a
)
few seconds, or until
the screen lights up,
to turn on your phone.
Press the rkey
to select.
key
Customizable r
that can be used
to open the
Settings screen
2
contents
check it out . . . . . . . . . . . 2
menu map. . . . . . . . . . . . 5
Finding your phone
features for the hearing
number and private ID 18
messaging . . . . . . . . . 18
customize messaging. 26
using your handset as a
modem. . . . . . . . . . . . 30
basics. . . . . . . . . . . . . . . 31
display . . . . . . . . . . . . 31
main menu . . . . . . . . . 32
carousel menu . . . . . . 32
text entry . . . . . . . . . . 33
volume . . . . . . . . . . . . 36
navigation key. . . . . . . 37
handsfree speaker . . . 37
transmitters . . . . . . . . 37
use GPS with map
impaired . . . . . . . . . . . 38
TTY . . . . . . . . . . . . . . . 39
security features. . . . . 40
essentials . . . . . . . . . . . . 7
about this guide . . . . . . 7
SIM card. . . . . . . . . . . . 8
microSD card . . . . . . . . 8
battery . . . . . . . . . . . . 10
turn it on & off . . . . . . 12
enable security. . . . . . 13
make a phone call. . . . 13
answer a phone call . . 13
advanced calling. . . . . 13
make a private call . . . 14
answer a private call. . 15
store a phone number or
private ID . . . . . . . . . . 17
call a stored phone
main attractions . . . . . . 41
multimedia . . . . . . . . . 41
my music . . . . . . . . . . 45
my images . . . . . . . . . 54
my videos. . . . . . . . . . 55
camera . . . . . . . . . . . . 57
camcorder . . . . . . . . . 60
PTX features. . . . . . . . 63
one touch PTT . . . . . . 70
PT manager . . . . . . . . 71
Bluetooth™ . . . . . . . . 71
call features. . . . . . . . . . 75
turn off a call alert. . . . 75
recent calls . . . . . . . . . 75
software . . . . . . . . . . . 37
number or private ID . 18
contents
3
redial . . . . . . . . . . . . . . 76
caller ID . . . . . . . . . . . . 76
call forward . . . . . . . . . 77
emergency calls . . . . . 77
international calls. . . . . 78
speed dial . . . . . . . . . . 78
voicemail . . . . . . . . . . . 79
reorder apps menu . . . 92
& Legal . . . . . . . . . .. .. . . 93
MOTOtalk™ . . . . . . . . . . 80
switching to MOTOtalk 81
exiting MOTOtalk. . . . . 81
channels and codes. . . 81
private MOTOtalk calls 84
making emergency calls in
MOTOtalk™ mode. . . . 85
setup options. . . . . . . . 85
customize. . . . . . . . . . . . 88
ring tones . . . . . . . . . . 88
backlight . . . . . . . . . . . 89
wallpaper. . . . . . . . . . . 89
datebook . . . . . . . . . . . 90
hide or show location
information . . . . . . . . . 91
contents
4
menu map
main menu
C
Tools
S
Push To Talk
H
Games and Apps
•
•
•
•
•
•
•
•
My Info
•
•
•
•
Call Alert
•
•
•
•
•
•
•
•
•
•
•
Alarm Clock Plus
Profiles
PT Manager
PTT Options
MOTOtalk
My Images
Alarm Clock Plus
Bluetooth
GPS
Datebook
Call Timers
Memo
My Music
My Videos
Download Apps
Open Source Notices
Photo Puzzle
Caluculator
L
E
Contacts
Messages
•
•
•
•
•
•
•
•
[Create Message]
j
Multimedia
iHelp
Java System
Memory Card
Voice Mail
Inbox
•
•
•
•
•
•
•
•
•
Shop
Drafts
Outbox
Sent Items
Fax Mail
Net Alert
Media Center
My Images
My Music
My Videos
Camera
u
Settings (see next page)
This is the standard main menu layout. Your
phone’s menu may be a little different.
Camcorder
Ring Tones
VoiceRecord
1
B
Web
Recent Calls
5
settings menu
Display/Info
Personalize
Memory Card
•
•
•
•
•
•
•
•
Wallpaper
Text Size
Theme
•
•
•
•
•
•
•
•
Reorder Menu
•
•
•
•
Remove Card
Shortcuts
Carousel
Store Media
Format Card
Help
Backlight
Clock
Up Key
Down Key
Left Softkey
Right Softkey
Power Up
Security
Menu View
Large Dialing
Language
•
•
•
•
Phone Lock
Keypad Lock
SIM PIN
Phone Calls
Volume
Change Passwords
•
•
•
•
•
•
•
•
•
•
•
•
•
Any Key Ans
•
•
•
•
•
Ringers/Alerts
Advanced
Auto Redial
Call Waiting
Auto Ans
Speaker
Earpiece
Multimedia
Keypad
•
•
•
•
•
•
•
•
Alert Timeout
Call Completion
Headset/Spkr
Connectivity
Flip Activation
Minute Beep
Call Duration
TTY
Hearing Aid
Notifications
DTMF Dialing
Call Forward
Prepend
Voice Playback
Reset Defaults
Return to Home
Transmitters
•
•
•
•
Speak Text
Speak Caller
Voice
Phone Only
Multimedia Volume
Connections
•
•
Bluetooth
USB
6
essentials
Caution: Before using the phone for the first
time, read the Important Safety and Legal
information included in the gray-edged pages
at the back of this guide.
2
Press the navigation keys ;to scroll to
Phone Calls, and press the center key
rto
select it.
symbols
This means a feature is network or
subscription dependent and may
not be available in all areas, or might
not be offered by your service
provider. Contact customer service
for more information.
about this guide
This guide shows how to locate a menu
feature as follows:
Find it:
This means that, from the home screen:
Press the menu key and then select
the Settings menu option
/
>
u
>
Phone Calls
This means a feature requires an
optional accessory.
1
/
u
.
essentials
7
SIM card
microSD card
Your handset may come with a microSD
card, microSD card adapter, and microSD card
reader1.
insert the SIM card
A microSD card is removable flash memory
you can use to store pictures, videos, and
audio files.
You can connect your phone using a
Motorola data cable directly to your
computer, access the microSD card
loaded in the phone to save or delete music,
images, videos, or audio files.
Find it:
/
>
u
>
Connections > USB
Warning: To avoid loss or damage, do not
remove your SIM card from your phone
unless absolutely necessary.
1. Depending on your service provider, the memory card,
memory card adapter, and memory card reader may not
be included with your phone. Your handset can be used
with a microSD memory card.
essentials
8
insert the microSD card
remove the microSD card
1
Remove the battery door, lift the rubber
flap and slide the microSD card in place.
Return the battery cover when you are
done.
Warning: Do not remove the microSD card
before selecting the Remove Card option under
Settings. Removing the microSD card before
selecting the Remove Card option could result in
loss of data.
1
From the home screen press />
u
>
Memory Card > Remove Card
.
2
Once the handset confirms it is safe to
remove the micorSD card, press
under OK
-
.
3
Remove the battery door.
Note: The first time you insert a microSD card
in your phone, you will see the following
options: [Do Nothing] Go To Audio Player, Go To Camera,
,
and Go To Media Center. Select an option to
continue.
essentials
9
4
Lift the rubber flap and with your
fingernail, slide the memory card out of
the slot.
battery
Note: Please consult “Battery Use &
Safety” on page 93 before using this product.
battery installation
1
Slide the battery door upwards until it is
released from the phone.
5
Close the memory card slot cover.
essentials
10
battery charging
2
Remove the battery door.
New batteries are not fully charged.
charge using the charger
1
Pull out the connector cover, and insert
the charger into the micro USB connector
on your phone as shown.
Note: You may attach a lanyard (sold
separately) on your phone.
3
Push the battery down until it snaps in
place.
4
Replace the battery door and slide it
down while pressing gently until you
hear a click.
essentials
11
battery indicators
low-power one, such as the USB connector
on your keyboard or bus-powered USB hub).
Typically, USB high-power connectors are
located directly on your computer.
d
e
f
g
The battery is at approximately 100%
to 90% capacity when the indicator is
blue and displaying three bars.
The battery is at approximately 65%
capacity when the indicator is green
and displaying two bars.
The battery is at approximately 10%
capacity when the indicator is yellow
and displaying one bar.
turn it on & off
To turn on your phone, press and hold
@for
a few seconds or until the display turns on. If
prompted, enter your four-digit unlock code.
The battery is at approximately 5%
capacity when the indicator is red and
has a flashing red bar.
h
The battery is charging.
charge from your
computer
You can partially charge your phone’s battery
by connecting a Motorola-approved USB cable
from your phone’s micro-USB port to a high
power USB connector on a computer (not a
To turn off your phone, press and hold
two seconds.
@for
Note: If you press the
@for more than four
seconds, the handset will turn on in Transmitters
Off mode. See “transmitters” on page 37.
essentials
12
enable security
answer a phone call
You must enable security the first time you
power on your phone or within 10 days of first
activation of your phone.
1
2
3
If you want to answer the call on speaker
phone, press the speaker key
)
.
If you want to answer the call using the
handset, press . To hang up press
1
2
Press
You are prompted to enable security.
Press under Yes. A series of screens
:
under Ok
.
`
@.
If you are using a Bluetooth headset,
press the answer key on your headset. To
hang up press the key again.
:
followed by the default home page
displays.
3
Press @to return to the home screen.
advanced calling
feature
make a phone call
call waiting To accept the second call
and put the active call on
Enter a phone number and press
voice command.
`or use a
hold press
:under Yes.
To accept the second call
To hang up press
@.
and end the active call press
`
.
essentials
13
To make a private call:
feature
1
2
Enter the Private ID you want to call.
3-way call
Make or receive a phone call
and press 3 Way. Enter
the second phone number,
press and under Join.
/
>
Press and hold the PTT button. Begin
talking after your phone emits a chirping
sound.
`
:
You cannot make any other
calls during a three-way call,
even if one party hangs up.
3
Release the PTT button to listen.
To end the call press
@.
Note: A Private call ends automatically if there
is no activity on the call for a few seconds.
any key
answer
To answer phone calls by
pressing any key on the
keypad press
/
>
u
>
On
send a call alert
Phone Calls
>
Any Key Ans
>
.
Sending a call alert discretely lets the
recipient know that you want to talk to him or
her on a Private call.
make a private call
Your Private ID is the number at which you
receive one-to-one Private calls. Talkgroup
numbers are numbers through which you
receive one-to-many group calls.
When you send a call alert, the recipient’s
handset displays your name and emits a
series of beeps or vibrations.
essentials
14
To send a call alert:
send a call alert with flip closed
1
Enter the Private ID you want to call as
you would when making a Private call.
1
2
Press the Smart Key (.
Use the external touch media keys and
select Recent Calls.
2
Press
:under Alert.
When the message Ready To Alert appears on
the display, press the PTT button until the
message Alert Successful appears.
3
Use the down volume button to select the
person you want to call.
4
Press the center external touch media
keys.
When the message Ready To Alert appears on
the display, press the PTT button until the
message Alert Successful appears.
answer a private call
Your phone chirps or vibrates when you
receive a Private call.
1
To answer the Private call, wait for the
caller to finish speaking.
essentials
15
2
3
Press and hold the PTT button until your
phone chirps, then begin talking.
make a phone call while in a
private call
When you are in a Private call, you can make a
phone call to the other participant if that
person’s phone number is stored in Contacts.
Release the PTT button to listen.
To end the call press
@.
answer a call alert
When you receive a call alert, you must:
1
2
While in a Private call press `.
A confirmation screen will appear asking
to Start Call To:.
option
3
Press :under Yes or press rto begin
the call.
Answer
Press the PTT button to start a
Private call with the sender.
Queue
Store the call alert to the call
call status & completion
You can send a message to a caller after
declining an incoming call, PTT call or call
alert.
alert queue by pressing
under Queue
Dismiss and delete the call
alert by pressing under Clear
:
.
Clear:
:
.
Find it:
/
>u
>
Advanced> Call Completion
You cannot receive phone calls or Private calls
until you do.
essentials
16
set up a message for incoming calls or
outgoing calls
store a phone number
or private ID
1
Press
/
>
u
>
Advanced
>
Call Completion >
Incoming call or Outgoing calls.
You can store a phone number or private ID in
Contacts
.
2
3
Select Off, Ask First or Automatic.
Find it:
/
>
L
>
[New Contact]
Select Message and create a message to be
sent or press
predefine message.
:under QNotes and select a
1
2
3
Enter a name for the new entry. Each
entry’s name can contain 20 characters.
4
Press and then press :Back.
r
Optionally, set a speed dial number for the
entry.
send a message after receiving
incoming calls
After you decline an incoming call, PTT call or
call alert, Send Text Message To appears on your
phone’s screen.
Enter the number for the entry and press
:
under Save when done.
Tip: To edit a contact entry later, press
under Contacts. Select a contact and press
Edit. Change the desired content and press
. Press under Save
:
/
>
1
Press
or press
:
:
under Yes to send the message
under No not to.
r
:
.
2
To edit a message before sending press
/
>
Edit.
essentials
17
call a stored phone
number or private ID
messaging
You can send and receive text messages
(SMS) and multimedia messages (MMS).
Find it:
/
>
L
1
2
Scroll to the Contacts entry.
create & send messages
If the Contacts entry contains more than
one number, scroll left or right until the
type of the number you want to call is
1
From the home screen press :under
Messages
>
[Create Message].
2
Enter the phone number of the person
you want to send the message to and
displayed (Mobile
,
Private1
,
Private2
,
Work1
,
Work2 Home, etc.).
,
press
ror press :under Search to
3
If you chose a phone number, press
`to
select a contact or recent call.
call the entry, or if you chose a Private ID,
Talkgroup ID, or SDG List, press and hold
the PTT button to call the number.
3
Enter your message in the Message field.
4
Optionally, insert (embed) or attach a
picture, sound, or quick note:
•
Quick Notes are short, pre-written
phrases. Press under QNotes to
insert a quick note.
Finding your phone
number and private ID
:
•
To insert pictures, sounds (audio files),
or voice recordings into the body of
Find it:
/
>
m
>
My Info
essentials
18
your message, press
choose from Insert Picture
/
,
>
Insert and
Insert Audio Insert
Capture Picture, Record Voice, or Record
5
When finished writing your message,
press under Sendl
,
:
.
Video
Video
,
.
check delivery status
If a message was successfully sent and you
set the message to confirm delivery, you can
check the delivery status:
Note: You can only insert one item at a
time.To remove an item from a
message, highlight it and press
under Delete
:
1
Scroll to the message you want to view
and press
.
/
>
Delivery Status.
•
•
To attach a file to the end of your
message, select ....More....
Attach] Browse Pictures Capture Picture
Audio Record Voice Browse Video, or Record
Video
>
Attach
>
[New
set up read receipts
While creating a message you can set up read
receipts. Press
>
,
,
Browse
,
,
/
>
Reports for these options:
.
option
Note: You can attach audio files and
pictures if they are not forward locked
and if they are not DRM-protected.
Off
no receipts
On Delivery
receipt when the message is
delivered
To remove an attachment, select Attach
Select the attachment to remove, and
.
When Read
receipt when the message is
read
press
/
>
Unattach.
essentials
19
•
To read your messages later, press /
option
>
E
>
Inbox.
Both
read receipts are generated
when a message is delivered
and read. (Available with MMS
only.)
manage received messages
feature
forward a
message
Press
/
>
Forward.
call a number in a message
Embedded objects and
attachments are also
forwarded.
If a message you receive contains a phone
number, Private ID, or Talkgroup ID in the From
field, the To field, the Cc field, the Subject field, or
the body of the message, you can call or send
a call alert to that number.
reply to a
message
Press
reply the sender only.
:under Reply to
For MMS messages, you
can also reply to all
recipients. Press
select Reply All
receive messages
When you receive a message, your phone
plays an alert and shows a notification.
/and
.
Select [Create Reply] to create
your message, or select a
short phrase from the list.
•
To view the message, press
:under
Read
.
•
To dismiss the message notification
press under Exit
:
.
essentials
20
feature
feature
view, play,
or open an
embedded
object or
Highlight the embedded
picture or audio file to view
or play it.
delete an
embedded
object or
Highlight the embedded
picture, audio file, or
attachment you want to
attachment delete. Press
/
>
Delete
For attachments, press
r.
attachment
Picture
,
Delete Video
,
Delete Audio,
Note: Attachments of an
unknown type cannot be
opened, but can be deleted.
or Delete Attachment
.
delete a
message
Highlight the message and
press under Delete. Press
under Yes to confirm.
:
save an
embedded
object
Highlight the picture or
audio file you want to save.
:
Press
Video, or Save Audio
/
>
Save Picture
,
Save
make a group call
.
1
View the message.
save an
attachment and press
Highlight the attachment
2
Highlight the Talkgroup ID you want to
call.
/
>
Save
Attachment
.
3
4
5
Press
Select Talkgroup
Push the PTT button.
/.
.
essentials
21
store information to contacts
6
Press
:under Save.
If a message you receive contains a phone
number, Private ID, Talkgroup ID, or an email
address in the From field, the To field, the Cc
field, the Subject field, or the body of the
message, you can store this information to
go to a website
If a message contains a web address, you can
go to that website.
1
2
View the message.
Contacts
.
Highlight the website URL you want to go
to.
1
2
View the message.
Highlight the number or email address
you want to save.
3
Press /> Go To Website.
Note: The entire URL must appear in the
message to allow you to open the website.
3
Press
To store the number or email address as a
new entry, select [New Contact]
/
>
Save Number or Save Email
.
4
multimedia message options
.
Multimedia messages (MMS) contain text,
pictures, and audio files. When you create an
MMS message, you have more options than
for a simple text message.
To store the number or email address to
an existing entry, select the entry.
5
With the Contacts type field highlighted,
press
;left or right to display the
Contacts type you want to assign the
number or email address.
essentials
22
When creating the message, select
....More....for these options:
manage your messages
clean up messages
option
Set how long and/or how many messages are
stored in the Inbox and Sent Items folders.
This features deletes only read messages,
unlocked messages, and sent messages.
Subject: Create or edit the subject line.
Attach: Attach a picture, audio file or voice
record.
Cc: Send a copy of this message to
someone else.
Find it:
/
>
E
>
/
>
Setup
>
Cleanup
1
2
Select Inbox or Sent Items
.
Auto Replies: Allows you to create a list of
possible short answers for the recipient to
choose when replying to your message.
Choose a clean up option from the
following list:
option
Priority: Set priority Normal or High
Valid Until: Set a date after which attempts to
deliver the message end, or press
under No Date
.
Off
Messages are never
automatically deleted.
:
.
5 Messages
If you have more than five
messages, messages are
deleted in the order they were
received, starting with the
oldest, until five are left.
essentials
23
3
Press
K
under Yes to automatically delete
option
messages now or press
delete messages later.
K
under No to
10 Messages If you have more than 10
messages, messages are
deleted in the order they were
received, starting with the
oldest, until 10 are left.
edit & send drafts
Find it: Press
/
>
E
>
Drafts
Saved unsent messages are stored in the
drafts folder.
1 Day
Messages are deleted if they
are older than one day.
1
To edit a draft, select it to open it. You can
change or add recipients, or edit the
message.
3 Days
Messages are deleted if they
are older than three days.
FirstIn
FirstOut
Messages are deleted as
necessary on a first-in first-out
basis.
2
To send a draft, select it to open it and
press
:under Send. When you send a
draft, it is removed from the Drafts folder.
Custom
Lets you create a clean-up
option of up to 199 messages
or 99 days for the Inbox and
Sent Items.
Note: To delete a draft without sending it,
scroll to the message you want to delete
and press
:
under Delete. Press
:
under Yes to confirm.
essentials
24
message threads
feature
If message threads are supported by your
service provider, you can organize your
messages by subject or sender.
viewunsent Press
messages
/
/
>
>
E
E
>
>
Outbox
.
resend a
failed
message
Press
Outbox.
Find it: Press
/
>
E
>
/
>
Threading
>
None
Highlight the message and
press
or Sender
:
under Resend
.
Tip: To delete a thread, select it and press
/
cancel an
unsent
Press
/
>
E
>
Outbox.
>
Delete Thread. Press :under Yes to confirm.
Highlight the message and
message
press
/
. Press
:under
more message management:
Cancel
.
feature
forward a
sent
message
Press
/
>
E
>
Sent Items.
delete an
unread
message
Press
Highlight the message and
press under Delete. Press
under Yes to confirm.
/
>
E
>
Inbox.
Highlight the message and
press Forward. Make
edits if you want, then
select the recipient and
press
/>
:
:
:
under Send
.
unlock or
lock
message
You have to unlock some
messages before you can
delete them. Select the
delete a
sent
message
Press
/
>
E
>
Sent Items.
Highlight the message and
press under Delete. Press
message. Press
/
>
.
Lock
:
Message or Unlock Message
:
under Yes to confirm.
essentials
25
feature
option
delete all
messages
Press
Sent Items, or Outbo. Press
Delete All. Press
Yes to confirm.
/
>
E
>
Inbox
,
Drafts
/
,
Report Default: Allows you to be automatically
notified when your message is delivered,
when read or both.
>
:under
Memory Size: Shows a report on used and free
memory in your phone.
customize messaging
MMS Setup: opens a submenu to set MMS
options.
Find it:
/
>
E
>
/
>
Setup.
Note: Available with MMS only.
option
Text Message Setup: opens a submenu to set
text messaging options.
Signature: Allows you to create a signature
that is automatically inserted at the end of
your messages. Signatures can be edited
before sending the message.
Note: Available with MOSMS only.
manage memory
Quick Notes: Lets you create new Quick Notes
Your text Inbox and Sent Items hold 200
messages each. The Outbox, and Drafts
folder hold up to 30 messages each. If they
are full, you cannot receive messages, send
and edit or delete Quick Notes you created.
Cleanup: Controls how long messages remain
in the Inbox and Sent Items before being
deleted.
essentials
26
messages, or save drafts until you delete
some items.
The following options become available:
option
Note: Media files and Java applications can
affect the available amount of memory on
your phone. If you run out of memory and
your Inbox, Sent Items, Outbox, and Drafts
folder are empty, delete unwanted media files
and Java applications to free up memory.
Friendly Name: Allows you to create a friendly
name. Your friendly name is displayed in the
From field on other iDEN handsets when
your message is received.
Download Options: Controls whether your phone
downloads new messages. Set this option
to Automatic if you want your phone to
download new messages automatically.
Select Manual if you want your phone to
prompt you before downloading new
messages.
To view the amount of memory available in
your text inbox:
Find it:
Memory Size
/
>
E
>
/
>
Setup
>
MMS setup
Replies: Lets you create or edit and delete
reply phrases you created.
Find it:
/
>
E
>
/
>
Setup
>
MMS Setup
This option is available from many
context-sensitive menus when you are using
MMS.
text message setup
Find it:
/
>
E
>
/
>
Setup
>
Text Msg setup
This option is available from many
essentials
27
context-sensitive menus when you are using
MOSMS.
edit quick notes or replies
You can edit only Reply phrases you have
created.
The following options become available:
1
2
3
From the Setup menu, select Quick Notes, or
select MMS Setup Replies
option
>
.
Srvc Cntr No: Allows you to enter a service
center number.
Select the quick note or reply you want to
edit.
Expire After: Allows you to set the number of
days before a message expires.
Edit the text and press
r.
delete quick notes and reply phrases
new quick notes & reply
phrases
1
From the Setup menu, select Quick Notes or
MMS Setup Replies
>
.
2
Scroll to the quick note or reply you want
to delete.
create quick notes or replies
1
From the Setup menu, select Quick Notes, or
select MMS Setup Replies
>
.
3
Press
Press
:
:
under Delete
.
2
3
Select [New Quicknote], or [New Reply].
4
under Yes to confirm.
Enter text from the keypad and press
r.
Note: You can delete only reply phrases you
have created.
essentials
28
delete all quick notes
If you are on a call when you receive a
message, your phone may sound a
notification tone during the call or after you
end the call, depending on how you set your
notification options.
1
2
3
From the Setup menu, select Quick Notes.
Press
Press
/
:
>
Delete All.
under Yes to confirm.
message notifications
set notification options
When you receive a message, your phone
notifies you with text on the display, a
notification tone or vibration.
To control whether your phone sounds
message notification tones while you are on a
phone call:
You can access the message or dismiss the
notification.
Find it:
/
>
u
>
Phone Calls> Notifications.
Select from the following options:
If you dismiss the notification, the message is
not deleted. It can be accessed through the
message center.
option
Receive All: Tones sound during calls for all
types of messages.
If you are not on a phone call when you
receive a message, your phone sounds a
notification tone every 30 seconds until you
access the message or dismiss the alert.
Message Mail Only: Tones sound during calls for
mail messages; tones for all other types of
messages are held until you end calls.
essentials
29
option
Delay All: Tones for all types of messages are
held until you end calls.
Note: Delay All is the default setting.
To set notification options during a call press
/
>
Call Setup
>
Notifications.
using your handset
as a modem
Your phone can be connected to a computer
via USB for use as a modem. For more
specific information on how to setup your
phone for use with your computer please visit
www.motorola.com/support and look under the FAQ
section.
essentials
30
basics
See page 1 for a basic phone diagram.
status indicators
Status indicators are shown at the top of the
home screen:
display
The home screen shows when you turn on
the phone. To dial a number from the home
3.
1. 2. 4.
5.
6. 7.
Ready
5/10/09
screen, press number keys and press
`.
Date
Note: Your home screen may look different.
Ready
5/10/09
Date
Left
Soft Key Label
Right
Soft Key Label
Contacts
Mesg
1
Signal Strength Indicator: Vertical bars
show the strength of the network
Left
Soft Key Label
Right
Soft Key Label
Contacts
Mesg
connection. You can’t make or receive
calls when
~
shows.
Soft key labels show the current soft key
functions. For soft key locations, see page 1.
basics
31
2
3
Active Phone Line:
line 1 is ready to make calls;
phone line 2 is ready to make calls.
%
indicates phone
indicates
main menu
All your phone’s features are available through
the main menu. You can set the main menu to
'
Speaker On/Off: Sounds associated with
Private calls and group calls can be set to
come through the earpiece rather than
through the speaker.
appear as List View
,
Tab View, or Icon View
.
Find it:
/
>
u
>
Display/Info Menu View
>
4
5
6
Ringer Vibe On/Off: Your phone is set to
carousel menu
The Carousel Menu allows you to access up
to nine applications from your phone’s idle
screen.
ring or not to ring.
Message Indicator: Shows when
you receive a text message.
Packet Data: Your handset is ready to
transfer packet data or is transferring
packet data when it shows a blinking
arrow.
access an application
1
Using the navigation key, scroll left or right
until you highlight the desired application.
7
Battery Charge Indicator: A fuller battery
2
Press
rto launch the application.
indicates a greater charge. Recharge the
Note: Availability of the Carousel Menu
depends on your service provider.
battery when your phone shows Low Battery
.
basics
32
auto hide
text entry
1
Press
/
.
>
u
>
Personalize
>
Carousel
>
Your phone provides convenient ways to enter
words, letters, punctuation, and numbers
whenever you are prompted to enter text (for
example, when adding a Contacts entry or
when using Text Messaging).
Auto Hide
Select from Always On
8 seconds
2
,
2 seconds,
4 seconds, or
.
Note: When Auto Hide is set to Always On, the
Carousel Menu will always be visible on the
idle screen.
change the character input mode
1
When you see a screen where you can
enter text, press to change the
/
assigning applications
character input mode.
1
Press
/
>
u
>
Personalize
>
Carousel.
2
Select one of the following options:
2
Highlight the position on the Carousel
Menu you would like the application to
entry method
Alpha
Press a key several times for
occupy and press
r.
different characters.
3
Highlight an application and press
select it.
rto
Word
Enter words using a predictive
text entering system that lets
you enter a word with fewer
keypresses.
basics
33
The Word text input method combines the
groups of letters found on each phone key
with a fast-access dictionary of words, and
recognizes what you want to text as you type.
It first offers the most commonly-used word
for the key sequence you enter and lets you
access other choices with one or more
entry method
Symbols
Numeric
Enter symbols.
Enter numbers by pressing the
numbers on the keypad.
Text Input Selects the desired entry
Settings
languages and Word Prediction
features.
presses of the
0key.
Insert
Selects a item to be inserted,
such a picture, an audio/video clip
or a voice recording.
enter a word using “word” method
character input
1
Select the Word character input method.
Note: available only when using
MMS messaging.
2
Press the corresponding keys once per
letter to enter a word (for example, to
enter the word Bill, press 2 4 5 5).
Tip: When entering text, press
letter capitalization (Abc
#to change
abc).
(If you make a mistake, press
*
to erase
to
>
ABC
>
a single character. Press and hold
delete an entire entry.)
*
word method
The Word text input method lets you enter
text into your phone by pressing keys just
once per letter.
3
To accept a word and insert a space,
press
#
.
basics
34
To accept a word completion (such as
lowercased. After you enter a character, the
cursor automatically advances to the next
space after two seconds or when you enter a
character on a different key.
Billion when you entered Bill), press
right.
;
If you get a word you don’t want, you can
press the
0
key to see more word
Characters scroll in this order:
choices and pick the one you want.
characters
1
Space . 1 ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ %
£ ¥
alpha method
To enter characters by tapping the keypad:
2
3
4
5
6
7
8
9
0
#
A B C 2 Á Ã Â À Ç
D E F 3 É Ê È
G H I 4 Í Ì
1
Select the Alpha method.
2
Press the corresponding keys repeatedly
until the letter you want appears. (For
example, to enter the word Bill, press
twice, three times, three times,
and three times again. If you make a
2
J K L 5
4
5
M N ñ O 6 Ó Õ Ô Ò
P Q R S 7 ß
5
mistake, press Delete to erase a single
character. Press and hold Delete to erase an
entire word.)
T U V 8 Ú Ü Û Ù
W X Y Z 9
+ - 0 * / \ [ ] = > < # §
Space / Shift
By default, the first letter of an entry is
capitalized and the following letters are
basics
35
characters
volume
Press the volume keys up
or down to:
*
Back
Press and hold
#
to switch between
•
•
•
turn off an incoming
call alert
lowercase and uppercase letters. The icons in
the upper left-hand corner of the screen show
the character type.
change the earpiece
volume during calls
character type
change the ringer
volume from the
home screen
Q or T
R or U
S or V
W
Lowercase
Uppercase
Shift Lock
Numerical
Symbols
Tip: You can quickly set your ringer to
Vibrate All by holding the down volume
key in the home screen.
X
basics
36
navigation key
transmitters
Press the navigation key
up, down, left, or right to
scroll to items in the
display. When you
Consult airline staff about the use of the
Transmitters Off feature during flight. Turn off
your phone whenever instructed to do so by
airline staff.
highlight the desired
Transmitters Off turns off your phone’s calling
and Bluetooth features in situations where
wireless phone use is prohibited, but you can
use the phone’s other non-calling features
when Transmitters is turned Off.
item, press
it.
rto select
handsfree speaker
You can use your phone’s handsfree speaker
to make calls without holding the phone to
your ear.
Find it:
/
>
u
>
Advanced
>
Transmitters
>
Off
use GPS with map
software
During a call, press
:under Speaker to turn
the handsfree speaker On.
Your phone can be connected to a PC, laptop,
or PDA via Bluetooth and USB for use as a
GPS receiver. For more specific information
on how to setup your phone for use with your
The handsfree speaker stays on until you
press
:under Speaker again.
basics
37
computer please visit www.motorola.com/support
and look under the FAQ section.
features for the hearing
impaired
using your phone with a
hearing aid
For best results use the following optimization
procedures and handset setting. They
generally apply as well for users with cochlear
implants:
If your HA has a telecoil, activate its switch,
then also rotate the handset as illustrated to
align the telecoils.
Note: Some automatically switched hearing
aids may need an auxiliary switching magnet.
If you are unsure whether your HA is telecoil
equipped or needs an auxiliary magnet,
please refer to your HA user guide or contact
a hearing aid professional or supplier.
optimize your handset position and
orientation
While in a phone call slide your phone up and
down, then left and right until best
microphone coupling is obtained. You also
may need to adjust your hearing aid (HA)
volume setting.
basics
38
Approximate telecoil location is within
6-13 mm of this location.
TTY
feature
Off - Shut off
M - Microphone
T - Telecoil
turn On TTY Press
feature
/
>
TTY
u
>
Phone Calls
>
>
Use TTY
>
On.
choose TTY Press
/
>
TTY
u
mode
Phone Calls
>
.
Approximate telecoil location is just
above the battery.
Select from TTY
,
VCO or HCO.
change the
TTY baud
rate
Press
Phone Calls
/
>
TTY
u
>
choose your hearing aid setting
Find it: Phone Calls Hearing Aid
>
>
Baud.
/
>
u
>
>
Select 45.45 or 50.00
.
1
Set this option to Microphone. Microphone
coupling is now optimized.
change TTY While in the TTY call, press
mode
during a call
/
>
In Call Setup
>
TTY
>
Type.
or
Select from TTY
,
VCO or HCO.
2
Set this option to Telecoil. Handset meets
US federal requirements for telecoil
coupling sound or set this option to Off
(factory default). This is the setting for non
HA users.
Note: The TTY device must be connected to
the phone through the micro-USB port.
A 2.5 mm to micro USB adapter is required to
support TTY.
basics
39
lock and unlock keypad
security features
feature
When your phone is closed and on the home
screen, your keypad locks to prevent
accidental key presses.
phone lock
To lock the phone press
/
Phone Lock
Auto Lock
>
u
>
Security
>
To lock your phone’s keypad, press /*
.
>
Lock Now or
.
keypad lock To lock the keypad press
/
> *.
lock button lock all external buttons.
enable SIM Press
PIN
change SIM Press
PIN
/
>
.
u
>
Security
>
>
SIM PIN
>
On
/
>
u
>
>
Security
Change Passwords
SIM PIN.
Note: You can make emergency calls on a
locked phone (see page 77).
basics
40
main attractions
•
My Images provides a slide show, image
browser, and image editor.
multimedia
You can store pictures, videos, and audio files
stored in your phone’s memory or in the
Audio, Music, Podcast, Image and Video
folders on a memory card inserted in your
phone’s memory card slot:
•
•
•
•
My Videos plays video files.
Camera lets you take photos.
Camcorder lets you make short movies.
Ringtones lets you purchase and preview
ringtones for your phone.
•
•
Media Center lets you view all supported
multimedia files on your device or your
memory card.
•
VoiceRecord lets you record audio notes.
You can also access these audio files through
the media center:
Note: The Media Center cannot read
the Music and Podcast folders on the
memory card.
•
Musical ring tones in the list of ring
tones
My Music provides an enhanced music
player for music and podcast files.
•
Audio files saved from MMS messages
received
main attractions
41
•
Audio files downloaded to your phone
include:
Because the memory card inserted in your
phone may contain files saved to it using a
device other than your phone, not all types of
pictures, videos, and audio files on the
memory card may be accessed through your
phone’s media center.
Format
Bit Rate / Info
Rate
AAC
Up to 320kbps
48 kHz
(MPEG4
AAC-LC)
.aac* , .3gp,
.m4a, .3ga,
.mp4
Items in the media center can be sent in
MMS messages and with Bluetooth. See
“receive messages” on page 20 and
“Bluetooth™” on page 71.
AAC+
Up to 128 kbps
(16 to 128 kbps)
Max: 48
kHz
.aac*, m4a,
.3ga, .mp4
Pictures in the media center can be sent in
Private calls using Send via PTT. See “PTX
features” on page 63.
AAC+
Up to 320 kbps
(16 to 320 kbps)
Up to
48 kHz
Enhanced
.aac*, .m4a,
.3ga, .mp4
AMR-NB
.amr, .3gp,
.3ga, .mp4
4.75 kbps – 12.20 8 kHz
kbps (supports all
3GPP specified
rates)
main attractions
42
Format
Bit Rate / Info
Sampling
Rate
Format
Bit Rate / Info
Sampling
Rate
AMR-WB
.awb, .3ga,
.3gp
6.6 kbps - 23.85
Kbps (supportsall
3GPP specified
rates)
16 kHz
PCM 16-bit
Linear
Up to 1536 kbps
Up to 48
kHz (8,
11.05, 12,
16, 22, 24,
3, 44, 48
kHz)
.wav, .au
iMelody
.imy
1 – 3.5 kHz
Monophonic
N/A
N/A
PCM 8-bit
Linear
.wav, .au
Up to 1536kbps
Up to 704 kbps
Up to 704 kbps
Up to
48 kHz
MIDI XMF
.xmf, .mmf,
.xmf0, .xmf1,
.mxmf
64 channels
64 channels
Up to 320kbps
PCM 8-bit
A-law
.wav, .au
Up to
48 kHz
MIDI
N/A
Stand
.mid, .midi,
.smf
PCM 8-bit
mu-law
.wav, .au
Up to 44
kHz (8,
11.05, 12,
16, 22, 44
kHz)
MP3
Up to
48 kHz
.mp3*,
.mpga*
Real Audio
LBR (Cook)
.rm, .ra, ram
Up to 96 kbps
Up to
44.1 kHz (8,
11, 22, 44
kHz)
main attractions
43
Supported video file formats include:
Format
Bit Rate / Info
Sampling
Rate
Format
Resolution / Extension
Real Audio
Sipro
5 kbps (fixed
rate)
8 kHz
Bit and
Frame Rate
(ACELP®.net)
.rm, .ra, ram
8.5/6.5 kbps(dual 8 kHz
rate)
MPEG4 +
352 x 288
.mp4, .3gp
AMR-NB
and 320 x
240 (up to
MPEG4 +
AMR-WB
16 kpbs (wide
band)
16 kHz
256 kbps);
176 x 144 and
128 x 96 (up
to 128 kbps);
up to 30 fps
MPEG4 + AAC /
AAC+ /Enhanced
AAC+
Real
Audio 10
.rm, .ra, ram
Up to 192 kbps
Up to 320 kbps
Up to
48 kHz (8,
11, 12, 16,
22.05, 24,
32, 44.1, 48
kHz)
H.263 + AMR-NB
H.263 + AMR-WB
352 x 288 (up .3gp
to 256 kbps);
176 x 144 and
128 x 96 (up
to 64 kbps);
15 fps
H.263 + AAC /
AAC+ /Enhanced
AAC+
WMA v9 L2
(also WMA
v3, v7, v8)
.wma*
48 kHz
Real Video G2 / 8 Up to 320
.rm, .rmvb
/ 9
kbps, 320 x
240, 15 fps
(*) These formats support album art and lyrics.
main attractions
44
Format
Resolution / Extension
Bit and
my music
Play music files stored in the phone memory
and the MUSIC/AUDIO/PODCAST directories
on the memory card inserted in your phone.
Frame Rate
H.264
Up to 320
kbps, 320 x
240, 15 fps
.mp4, .3gp
.wmv, .asf
WMV8 / WMV 9
Up to 384
kbps, 320 x
240, 24 fps
Now Playing...
The Song
The Band
0:39
3:38
Pause
Back
The music player groups the music files into
folders and lists. When you select a music file
to play, the music player plays this file, then
plays the other music files grouped with it.
The music player also plays podcasts you
download to your computer and then save on
main attractions
45
the Podcast directory on your phone’s
memory card. You can mark highlights within
a podcast file to help you find the parts you
most want to listen to.
filename rules
Use these file naming rules:
•
The filename can contain UTF8
characters, including ASCII, however
only supported characters will be
displayed.
If your service provider offers MMS, you can
send details of the podcast to a friend and
send feedback to the podcast creator using
MMS messages.
•
The filename can be up to 255
characters long, including the file
extension, however only the first 32
characters will be displayed.
memory card folder structure
Your phone creates folders on your memory
card. To view files on the memory card, you
must store the file in the correct folder:
Warning: If a music file name is longer than
255 characters, including the file format
(.MP3), the song will not be visible on the
player and therefore can not be played. This
can be corrected by renaming the file and
replacing it on the card.
•
Audio folder: audio files, such as ring
tones, and voice recordings
•
•
•
•
Image folder: pictures
Music folder: music files, such as songs
Podcast folder: Podcasts
play music files
Find it:
/
>
j
>
My Music
Video folder: videos
main attractions
46
1
2
Scroll to choose how you want to play
play music while loading files
your music (Songs Playlists, Albums, and
,
The first time the music player finds music
files on your memory card, it loads and
organizes these files. This may take a long
time for a large number of files.
more).
Tip: The Songs folder contains all the
music files on the memory card.
To play the first music file in the folder,
To play music while files are loading:
press
:under Play. (If the selected folder
Find it:
/
>
j
>
My Music
contains subfolders, this plays the first
music file in the first of the subfolders.)
1
Scroll through songs and folders while
loading is going on the background.
Press
Scroll to a music file and press
Play to play the first music file in it.
r
to view the folder’s contents.
2
Scroll to a music file or folder and press
:
under
:
under Play or r.
The following options become available
through the navigation panel:
When you are viewing a list of folders with
the music player, you can scroll to a folder and
press
:under Play to start playing the
option
contents of that folder or press
the contents of the folder.
rto view
Pause and Resume: Press
to pause, and press
resume playing paused music files.
:
under Pause or
r
:
under Play or
rto
To stop viewing a folder and return to the
folder or list that contains it, press under
:
Back
.
main attractions
47
option
option
Skip to Next or Previous: Press and release
right or left to skip to the next or previous
music file.
;
Visuals: Lets you choose among different
types of visual equalizers which sync with
the Music.
Fast Forward and Rewind: Press and hold
or left for 2 seconds to fast forward or to
rewind.
;
right
3D Music: Lets you experience surround
effects when the handset is tethered
to a stereo headset.
Setting the 3D Music feature to On, allows you
set up the music player
to select effects from the list of Music Reverbs
.
Find it:
/
>
j
>
My Music
>
/
>
Setup
Album View: Lets you choose to view either a
list view or an image view.
The music player can be set up with the
Auto Update: Lets you reload all music files
every time you launch My Music. If you set
Auto Update to Off, it will follow the last known
music library configuration in order to save
loading time.
following options by pressing
/
>
Setup:
option
Shuffle: Lets you set the music player to play
the music files in a list or folder in random
order.
Equalizer: Lets you customize the sound of the
music player.
Repeat: Lets you set the music player to play
one or all the music files in a list or folder
repeatedly.
View: Lets you choose between Default view
and Folder view.
main attractions
48
number. For example, the first playlist you
create without naming is automatically
option
Music Reverbs: Lets you choose a 3D sound
effect for use with the 3D Music feature.
named Playlist-1
.
2
3
4
Select [Add Songs]. A list of all music files
appears.
playlists
Playlists are lists of music files you create
from the files already available through My
Music.
Tip: For options to help you sort through
this list, press
/.
Select each file you want on the playlist. A
checkmark appears by each selected file.
Playlists enable you to organize music files,
but they do not change anything in other
folders or on the memory card. Adding or
deleting a file on a playlist does not copy,
delete or move it.
Tip: To deselect a selected item, scroll to
a selected file and press
When you are finished selecting files,
press under Done and under Save.
r.
:
:
create a playlist
Find it:
[Create New]
/
.
>
j
>
My Music
>
Playlists
>
1
Enter a playlist name.
Note: If you do not assign a name, the
playlist is named Playlist followed by a
main attractions
49
The following options are available for existing
playlists by pressing
option
/
>
My Music Playlists >
>
Reorder Playlists: You can change the order of
/
>
Edit Playlist:
the playlists in the Playlists folder. Press
Reorder Playlists. Scroll to the playlist you want
to move and press under Grab, and then
scroll to the place where you want the
playlist to appear and press under Insert
Delete a Playlist: While in the music player
select Playlists. Scroll to the playlist you want
to delete and press Delete Playlist. Press
under Yes to confirm.
/>
option
:
Reorder Songs in a Playlist: You can change the
order of the music files while creating or
:
.
editing the playlist by pressing
Reorder Songs. Scroll to the song you want to
move, press under Grab, and then scroll
to the place where you want the song to
appear and press under Insert
/>
:
/
>
:
.
:
Remove Songs: You can remove some or all
songs while creating or editing a playlist.
Edit a Playlist: You can change a playlist name,
add music files, remove music files, and
change the order of the music files. Select a
Before you have saved a new playlist or
while editing a playlist, scroll to the song
playlist and press
/
:
>
Edit Playlist. Make
changes and press
under Save
.
you want to remove and press
/>
Remove Song and press
Remove All Songs. Press
r
:
, or you can select
under Yes to
confirm and
:under Save.
main attractions
50
podcasts
option
Delete all Playlists: While in the music player
Find it:
/
>
j
>
My Music
>
Podcasts
select Playlists. Press
/
>
Delete All Playlists
Note: The Podcasts folder is empty until you
download podcasts from your computer.
and press under Yes to confirm.
:
Note: This deletes all playlists except the
Favorites playlist.
1
Scroll to view individual podcast episodes
or folders containing multiple episodes of
the same program.
Reload Music: Searches your memory card for
music files.
2
Press
rto view the podcast episodes
within a folder or the details screen of an
individual podcast episode.
favorites
The Favorites playlist is a permanent playlist. You
can Add To Favorites, remove and change the
order of the music files, but you cannot
rename or delete music files.
You can pause, resume, fast-forward, and
rewind just as with any other music file.
Some functions differ when playing a podcast:
•
Pressing rwhen you have scrolled to
a podcast displays a screen showing
podcast details, but does not play the
Find it:
Select the song you want to add to your
favorites and press
/
>
j
>
My Music
>
Songs
/
>
Add To Favorites.
podcast. To play the podcast, press
:
under Play. After you begin playing the
main attractions
51
podcast, pressing
r
pauses and
add a highlight marker
resumes the podcast.
1
While playing a Podcast press />
Add Highlights
.
•
If the podcast you are playing contains
highlights, pressing and releasing the
2
3
Press :under On to mark the beginning.
;
right or left skips to the next or
Go to the point in the podcast that you
want to mark as the end of the highlight
previous highlight within the podcast,
or to the beginning or end of the
podcast.
and press
:
under Off.
4
Press
:
under Back
.
highlights
Tip: Highlight markers can be deleted by
pressing Clear or pressing
Clear All Highlights from the
Highlights are portions of a podcast that are
marked to help you find them more easily. You
can use the music player to add and delete
highlight markers. Press and release (don’t
/
>
/>
Edit Highlights
> />
Podcasts menu.
hold) the
;right or left to find them.
send podcast information
You can play all the highlights in a podcast and
skip everything that is not marked as a
You can only share podcast details with
others. If you want to share podcast details,
you have saved to your memory card, you can
send it in an MMS message that can be saved
and downloaded onto their computer.
highlight using Highlights Only
.
main attractions
52
Find it:
Forward Details
/
>
>
j
>
Send.
My Music
>
Podcasts
> />
background music
Your handset has the capability to play music
in the background while you are accessing
my music on the external
display
other features like Settings
GPS Contacts MMS Datebook
,
Media Center
,
,
,
,
,
Memo Recent Calls, and
,
others.
You can launch My Music from the external
display by pressing the Smart Key and
(
You can also enjoy listening to your favorite
background music while browsing the web,
reading news or checking the weather.
selecting the My Music apllication from the
menu.
Note: Pressing the Smart Key
the external idle screen will access the main
menu in the external display.
(when on
play music in the background
Find it:
/
>
j
>
My Music
>
Songs
.
1
Select a music file and press
the song.
rto play
Use the external touch media keys to control
My Music from the extrenal display. For more
information, see “touch media keys” on
page 62.
2
Press
/
>
Hide Player.
The music player continues playing and the
handset returns to the home screen. To jump
back to the music player, press
:under
Player
.
main attractions
53
my images
option
Rename: Lets you rename the image
filename.
Browse, edit and view a slide show of images
on your phone or memory card on your
internal display. You can also browse or view a
slide show on the external display.
Delete Current: Deletes the current highlighted
image.
Delete Multiple: Lets you chose multiple images
to delete at one time.
my images menu
Access these image options by pressing
/
Switch to Card: Toggles between images stored
on the phone or memory card.
>
j
>
My Images
>
/
:
Set as Internal Wallpaper: Sets the highlighted
image as the internal display wallpaper.
option
Edit: Displays several options for editing your
photos including:Crop, Rotate/Flip, Color Adjustment,
Resize, Borders, Stamps, Text and Text Bubble.
Set as External Wallpaper: Sets the highlighted
image as the external display wallpaper..
Set As Caller ID: Allows you to assign the
highlighted image to a Contact.
Slideshow: Starts a slide show containing
images from the currently highlighted
image.
Send Via BLuetooth: Lets you send the image via
Bluetooth.
Save as New: Lets you save an image with a
new filename.
Preview: Displays the highlighted image.
main attractions
54
Use the external touch media keys to control
My Images from the external display:
viewing images
Find it:
/
>
j
>
My Images
Slideshow to view a show of all
images in the current folder.
Press left or right to switch between
viewing images on the phone and the
memory card. The and keys can
also be used to scroll the images.
•
•
•
When viewing single images on the
external display use the Previous/Next
buttons to scroll through the images.
1
Press />
2
;
When viewing a slide show on the
external display, use the right
to control the show.
ybutton
#
*
Press the Smart Key
(to suspend
the My Images application and go to
the External Display Menu.
my images on the external
display
You can launch My Images on the external
display by closing the flip while in the My
Images application by pressing the Smart Key
For more information, see “touch media
keys” on page 62.
(
on the external display and selecting
my videos
My Videos lets you easily browse and view
video files on your phone or memory card.
My Images from the menu.
The available images are shown using
thumbnails at the bottom of the display. The
thumbnails scroll as you move through the
images.
Find it:
/
>
j
>
My Videos
main attractions
55
viewing videos
My Videos will display the video in portrait
mode by default.
my videos on the external
display
You can launch My Videos on the external
display by closing the flip while in the My
Videos application by pressing the Smart Key
Tip: To change the default to landscape mode
press
/
>
Full Screen.
(
on the external display and selecting
My Videos from the menu.
my videos setup menu
Tip: Closing the flip while watching a video on
the internal display moves the video to the
external display.
Find it:
/
>
j
>
My Videos
>
/
>
Setup
Tip: If you can’t access this menu, take a
sample video recording and save it.
Use the external touch media keys to control
My Videos from the external display:
The My Videos Setup Menu allows you to
change the following settings:
•
When viewing a video on the external
display, use the right button to
control the video playback. Press and
hold the key to fast forward the
option
y
View: Displays options for viewing your
videos as Default and Folder view.
v
video. Press and hold the
rewind the video.
Vkey to
3D Audio: Lets you turn 3D audio On and Off
.
Reverbs: Lets you choose from a number of
3D audio visual settings.
main attractions
56
•
•
When viewing videos on the external
display use the vVbuttons to scroll
through available videos.
To take pictures aim the camera lens and
press under Capture or press
:
r.
To discard the picture without saving it, press
under Discard
From the camera viewfinder, you can press
to enter Menu Options
r.
Press the Smart Key (to suspend the
My Videos application and go to the
External Display Menu. For more
information, see “touch media keys”
on page 62.
:
.
/
.
The following options become available:
camera
Take and save pictures with the integrated
camera. Then, access them through the
Media Center.
option
Media Center: Opens the Media Center
application.
Record Video: To switch the camera to
camcorder mode.
You can send pictures via Private Calls,
Bluetooth, or MMS message. You can also
set them as your phone’s wallpaper.
Zoom: To set the camera’s zoom to 1x 2x, or
,
4x.
Remove Card: To safely remove the memory
card from the phone.
access the camera
To access the camera with the flip open,
press
/
>
j
>
Camera.
main attractions
57
option
option
Self Timer: Delay capturing the picture for a
selected number of seconds. The values
Exposure Control: Adjusts the exposure of the
picture from -2 to +2.
are: Off (default), 10 seconds
seconds
,
15 seconds, 20
Style: Sets the type of picture effect to Normal
,
.
Black and White
,
Sepia, Solarization and Negative.
To turn off the timer before the picture is
captured, press under Cancel
GPS Tag: Allows you to turn GPS Tag feature On
or Off
Picture Quality: Adjust the picture quality to
Normal or Fine
Picture Size: Set up the picture size to Max
(1200x1600) Xlarge (960x1280) Large (480x640)
Wallpaper (240x320) Medium (176x220), or Small
(128x160). You can also set picture size from
the viewfinder by pressing left and right.
White Balance: Sets the white balance to
Memory Usage: Shows the total amount of Used
Free, and total Capacity of the phone’s memory
and of the SD memory card.
,
:
.
.
Memory Card: Allows you to remove the
memory card, set where videos are stored:
On Phone or Prefer On Card, format the memory
.
card, and to display Help
.
Camera Setup: To access the camera set up
screen.
,
,
,
,
Note: You can take pictures of yourself only
with the flip open.
Automatic
Night.
,
Sunny, Cloudy, Fluorescent, Tungsten or
main attractions
58
The media center contains all your pictures,
music files, and videos located on your
phone’s memory. Press
your results.
access the camera on the
external display
You can launch the camera on the external
display with the flip closed by pressing the
*
or
#
to filter
Smart Key
selecting Camera from the menu.
(on the external display and
customize the camera
Find it:
/
>
j
>
Camera
>
/
>
Camera Setup
Use the external touch media keys to control
the camera from the external display:
The following options become available:
option
For more information, see “touch media
keys” on page 62.
Ask for Name: If this option is On, you are
prompted to enter a name for each picture
before saving. Otherwise, pictures are
automatically saved with the date and a
number as their names.
Tip: Pictures taken from the external display
are automatically saved to your phone or
phone memory card.
Shutter Sound
:
Set the default sound the
camera makes when is taking a picture.
Sets the default value for the Picture
Size option.
access the media center
You can access the media center from the
Default Size
:
camera at any time by pressing
/
>
Media
Center, except when you are using the Camera
Setup menu or viewing the memory screen.
main attractions
59
4
To save the recorded video, press
From the camcorder viewfinder, you can
press to enter Menu Options
r.
option
Default Quality: Sets the default value for the
quality of the picture.
/
.
The following options become available:
GPS Tag: If this option is On, pictures will be
tagged with the geographic location of
where they were taken.
option
Media Center: Opens the Media Center
application.
camcorder
Capture Picture: To switch the camera to picture
mode.
You can use your phone’s camcorder feature
to record videos.
Zoom: To set the camera’s zoom to 1x 2x, or
,
4x.
Find it:
/
>
j
>
Camcorder
Remove Card: To safely remove the memory
card from the phone.
record video
Video Size:Set up the picture size to Min
1
Press
To stop recording and discard the partially
recorded video, press under Cancel
To stop recording the video press
under Stop
:under Record, or press r.
(128x96) Med (176x144), or Max (320x240). You
,
2
can also set picture size from the viewfinder
by pressing left and right.
:
.
3
:
.
main attractions
60
customize the camcorder
option
Video Length: Allows you to choose between
Short, to limit video length for sending via
MMS message, or Maximum for longer
videos.
Find it:
/
>
j
>
Camcorder
>
/
>
Camera Setup
The following options become available:
option
Ask for Name: If this option is On, you are
prompted to enter a name for each picture
before saving. Otherwise, pictures are
automatically saved with the date and a
number as their names.
Note: When set to Maximum, video length is
limited to 60 seconds when stored to your
phone’s memory. When stored to a
memory card, video length is limited to
available space on the memory card, or two
hours.
Shutter Sound
:
Set the default sound the
camera makes when is taking a picture.
Sets the default value for the
Memory Usage: Shows the total amount of Used
,
Free, and total Capacity of the phone’s memory
Default Video Size
:
and of the memory card.
Video Size option.
Memory Card: Allows you to remove the
memory card, set where videos are stored:
On Phone or Prefer On Card, format the memory
deleting a recorded video
If you do not want to save the recorded video,
card, and to display Help
.
press
:under Discard to delete the recorded
Camera Setup: To access the camera set up
screen.
video and return to the video viewfinder.
main attractions
61
These icons appear depending on how you
are holding your phone:
sending video via MMS
message
Icon
Function
To send the recorded video via an MMS
message, press
:under Send. The video will
Camera Keys are shown in Landscape
be automatically attached to a new MMS
message.
Z
[
Zoom in
Zoom out
Note: To ensure the video file is small enough
to be sent via MMS, set the Camcorder video
V
Exit
,
`
X
Take Pictures
Record Videos
Play/Pause
length to Short
.
touch media keys
J
@
K
Previous/Rewind
Multi Function Touch Key
Next/Forward
Your i890 phone comes with touch media
keys on the front of the flip that change in
portrait or landscape mode depending on the
application you are using.
Music Keys are shown in Portrait
V
Exit
X
W
Y
Play/Pause Song
Previous Song/Rewind
Next Song/Fast Forward
main attractions
62
When you make or receive a Private call, your
phone automatically determines whether the
phone you are engaged in a Private call with is
able to receive each of these items. Your
phone saves this information for as long as
the Private ID is on your Recent Calls list or is
saved in your Contacts. Your phone updates the
saved information each time you make or
receive a call to or from that Private ID.
PTX features
With Push To View features, your phone can
send and receive the following items through
Private calls with other phones that have this
capability:
•
•
•
•
•
•
Short text messages1
Pictures1
Datebook events
My Info
Note: You cannot send PTT feature items
during Talkgroup calls or SDGC calls.
Contact information
Location information1
send messages
The Push to Send Messages feature
lets you send short text messages through
Private calls.
You can choose to send messages, pictures,
events, My Info Contacts or Location information to
,
the Private ID you are engaged in a Private call
with, Private IDs on the Recent Calls list, and
Private IDs stored in Contacts
When you send a message, it appears on the
display of the phone you are engaged in the
Private call with.
.
1. Additional charges may apply.
main attractions
63
begin a message from the PT Manager
begin a message & choose a
recipient
You can begin a message during a Private call,
The PT Manager lets you select the Private ID
you want to send the message to from Contacts
or the Recent Calls list.
from the Contacts list, the Recent Calls list, or from
Find it:
/
>
N
>
PT Manager
>
Send Message.
the PT Manager
begin a message during a Private call
While in a Private call, press
.
Then select A Contact or A Recent Call to see a list
of entries from the Contacts or the Recent Calls list
that can receive messages.
/
>
Use PTT Feature
>
Send Message.
Note: The first time you send a message,
Messaging Fees May Apply Continue? appears and you
create messages
After you have begun a message and chosen
a recipient, a screen appears that lets you
create the text of the message you want to
send. Your message may be up to 765
characters long.
are prompted to respond. Press
to acknowledge the message.
:under Yes
begin a message from the Contacts or
the Recent Calls list
You can choose from a list of ready-made
words or short phrases called Quick Notes.
You can use a Quick Note as it is or edit it
before you send it. Editing a Quick Note
1
From the Contacts or the Recent Calls list,
select the entry containing the Private ID
you want to send the message to.
2
Press
/
>
Use PTT Feature
>
Send Message.
main attractions
64
changes the Quick Note for this message only
and will not change the Quick Note on the list.
send pictures
You can send pictures stored in the Media
Center through Private calls. The picture you
send appears on the Private call recipient’s
display.
send a completed message
After you have completed your message,
press the PTT button to send it.
If the recipient accepts the picture, their
phone saves the picture. The picture then
appears in that phone’s recent call list.
receive messages
When you receive a message, a message
notification appears on the display.
The first time you send a stored picture after
turning the phone on, Picture Fees May Apply
Continue? appears and you are prompted to
respond.
To view the message: Press
:
under Read
under
.
To dismiss the message: Press
:
Dismiss
.
Note: You cannot make or receive Private
calls while transmitting or receiving a picture.
reply to a message
send a picture during a call
1
2
3
View the message.
1
While in a Private call, press :under
Press under Reply
:
.
Picture
.
Create the message and press the PTT
button to send it.
or
main attractions
65
Press
/
>
Use PTT Feature
>
Send Picture.
start a call by sending a picture
2
3
Select Capture Picture to take a new picture.
from the media center
or
Find it:
/
>
j
>
Media Center
Scroll left or right to Phone: Pictures or
Card: Pictures
Browse Picture to select a picture stored
on the phone or microSD memory
card.
1
.
2
3
4
Select the picture you want to send.
Press
Select A Contact or A Recent Call
Press
under Save
,
to take the picture and press :
.
/
>
Send Via...
>
Send Via PTT
.
or
A list of contacts that have Private IDs and
are able to receive pictures appears.
From the list of pictures, select the picture
you want to send.
5
Select the name of the person you want
to send the picture to.
4
Press the PTT button to send the picture.
5
Wait while the picture is transmitted. The
Private call is temporarily interrupted
while a picture is transmitted.
6
7
Press the PTT button to send the picture.
When prompted, press the PTT button to
resume the Private call.
6
When prompted, press the PTT button to
resume the Private call.
from the PT Manager:
Find it: PT Manager
/
>
S
>
>
Send Picture.
main attractions
66
1
2
Select A Contact or A Recent Call
.
When you see a message asking if you want
to accept the picture, press Yes to accept or No
to decline.
A list of contacts that have Private IDs and
are able to receive pictures appears.
Select the name of the person you want
to send the picture to.
clear a picture from the display
If you want to clear a picture from your
phone’s display while still on a call, press
3
4
5
Select Browse Picture or Capture Picture.
/
>
Clear Screen.
Press the PTT button to send the picture.
Once picture has been sent, when
prompted press the PTT button to resume
the call.
send a datebook event
to send a datebook event during a
private call
receive a picture
1
While in a Private call press />
When someone sends you a picture, your
phone emits a tone or vibrates and a message
appears asking if you want to accept the
picture.
Use PTT Feature
>
Send Event.
Note: If these options do not appear on
the menu, the Private ID you are engaged
in a private call with is not able to receive
Datebook events.
Pictures you receive are saved either to your
phone’s memory or SD card. They are
accessible through the media center.
2
If you want to create a new datebook
event, press
:
under New and create the
main attractions
67
event in your datebook. If you want to
chose an existing event do so.
set my info sending option
You can control what portion of the
information in My Info is sent and whether it is
sent automatically in every call or only when
you choose to send it.
3
If the event is a recurring event: Select
This Event Only to send only the event
selected. Select Repeat Events to send all
occurrences of the event.
Find it:
/
>
S
>
PT Manager
>
Configure PTT My
>
Info
>
4
Push the PTT button to send the event.
Info to Send
.
send my info
1
2
Select or remove the fields you want to
send.
1
While in a Private Call press />
Send My Info via PTT, and push the PTT button
Press
:under Done.
to send.
The information your phone sends always
includes My Name, and Private ID1. You may also
send Mobile, Other, Carrier IP Private ID2, Work1, Work2,
Home, Email1, Email2, Fax and Pager depending on
your sending options.
or
,
2
From the home screen press
Send My Info via PTT. Enter a
Private ID or press under Browse to
chose a recipient from Contacts, Recent
/
>
C
>
My Info
> />
:
automatic sending
To control whether you send your information
automatically:
Calls or Memo, and press
PTT button to send.
r. Push the
main attractions
68
Find it:
/
>
S
>
PT Manager
>
Configure
>
PTT My
send your location
Info
>
Auto Send
Select On or Off
When you make a call in which your
You can transfer your approximate
location information through Private calls to
other enabled phones. Using the integrated
GPS feature, the following location
information can be shared:
1
.
2
information is sent automatically, the
name you entered in the My Name field of
My Info appears on the display of the
recipient’s phone, even if your name and
Private ID are not stored in the recipient’s
Contacts.
•
•
Time Stamped Latitude/Longitude
Relative Location or Direction and
distance from the sender in Miles or
Kilometers
Find it:
/
>
S
>
PT Manager Send Location
>
send contact information
1
Select A Contact or A Recent Call.
1
2
3
While in a Private Call press />
Use PTT Feature
.
A list of contacts that have Private IDs and
are able to receive locations appears.
Select Send Contact and select the contact
information you want to send.
2
3
Select the name of the person you want
to send your location to.
Push the PTT button to send it.
Press the PTT button to send your
location.
main attractions
69
Note: The location information can be stored
in the recipient’s recent call list.
One Touch PTT sets your phone to do any of
the following each time you press the PTT
button from the home screen:
turn PTT features on and off
You can turn your phone’s ability to send and
receive messages, pictures, and Datebook
events and location info on and off.
option
Send Picture: Go to the first screen to send
pictures. See “send pictures” on page 65.
Send Event: Go to the first screen to send a
Datebook event.
You cannot turn your phone’s ability to send
and receive My Info and contact information
on and off.
Send My Info: Go to the first screen to send My
Info. See “send my info” on page 68.
Find it:
Check or uncheck Messages
Location
/
>
S
>
PTT Options
>
On/Off PTT Features
Events or
Send Contact: Go to the first screen to send a
contact. See “send contact information” on
page 69.
,
Pictures
,
.
Send Location: Go to the first screen to send
your location. See “send your location” on
page 69.
one touch PTT
Find it:
/
>
S
>
PT Manager Configure> One
>
Off: Nothing happens when you press the
PTT button from the home screen.
Touch PTT
main attractions
70
1
2
Select Send Event, Send My Info, Send Contact, Send
PTT item you are sending, select a
option
Last Call: Call the most recent Private ID or
Group on the recent calls list.
contact and press the PTT button to send.
Assigned Number: Call a Private ID you assign.
Enter the number using your keypad, or
or
Select Configure to configure your PTT Quick
press
:under Search. Select Contacts, Recent
Notes
,
PTT My Info, PTT Location, One Touch PTT, or
Calls, or Memo
.
On/Off PTT Features
.
Note: If you are entering a Talkgroup
number, enter before the number.
#
Bluetooth™
PT Manager: Go to PT Manager. See “PT
manager” on page 71.
Find it:
/
>
c
Send Message: Go to the first screen to send a
message.
turn Bluetooth on or off
You can turn your phone’s Bluetooth feature
on or off. While Bluetooth power is on, your
phone can communicate with other devices.
PT manager
The PT Manager lets you quickly access PTT
features, and other Private call features, from
the main menu.
Find it:
/
>
C
>c
>
Setup Power.
>
1
Select On to power Bluetooth On.
Find it:
/
>
S
>
PT Manager
main attractions
71
2
3
Select Name if you wish to assign a name
to your handset.
until it finds it. Press rwhen you see
the name of the Bluetooth headset on
your screen.
Select Find Me to determine the amount of
time in which your handset can be found
by other Bluetooth devices.
3
Your handset requires that you create a
bond in order to connect with a Bluetooth
headset. Press
:under Yes when you
You can turn off Bluetooth if you want to
prolong battery life or if you enter an area
where Bluetooth is prohibited.
are prompted to bond with the headset.
4
Enter the Bluetooth pass key.
Some Bluetooth devices ship with
Bluetooth PINs. Please refer to your
Bluetooth device’s user guide to locate
this information.
make a Bluetooth connection
connect your handset with a Bluetooth
headset
If a device ships without a Bluetooth PIN,
then you can enter any PIN for that
device. To establish a connection to that
device, enter the same PIN for both your
phone and the device. For example, if you
enter 1234 as the device’s PIN, then enter
1234 as your phone’s PIN.
Find it:
[Look for Devices]
/
>
.
C
>
c
>
Audio Devices
>
1
Follow the instructions on your Bluetooth
headset to set it up to be found.
2
Once your Bluetooth headset is set to be
found press
ron your handset. Your
phone will scan for the Bluetooth headset
5
Press :under Ok.
main attractions
72
This handset offers the Bluetooth auto pair
feature with auto pair compatible Motorola
devices. When bonded via Bluetooth with a
certain device, the pin will not be required
2
Select the audio device you want to
connect to from the list of Audio Devices
.
If the Audio Devices list contains only one device,
your phone will try to connect to it.
connect your handset with another
Bluetooth device
send information via Bluetooth
Your handset can transfer Contacts entries,
Datebook events, audio files, pictures and
videos to another Bluetooth device.
Find it:
/
>
C
>
c
>
Pair to Devices.
1
Select the device you want from the list of
found devices on your screen.
The receiving device must be within 32 feet
(10 meters) of your phone in order to connect.
2
Create a bond if you are prompted to do
so.
Note: Files sent or received may be up
to 10 MB, depending on your service
provider. File transfers will not work if a
microSD card is not installed in your phone.
If you have previously connected to a device,
the device will be stored on your phone so
you can connect with it easily.
use Bluetooth during a call
sending information
1
From within Contacts
select the Contacts entry, Datebook
,
Datebook, or Media Center
,
You can connect with available Bluetooth
devices during a call.
1
While in a call, press
/
>
Use Bluetooth.
main attractions
73
event, audio file, video, or picture you
want to send.
file browsing with the
Bluetooth file transfer service
2
3
Press
/
>
Send Via...
>
Bluetooth.
1
Double click the My Computer Icon on the
desktop.
Select the device you want to transfer the
contact information to, or search for the
2
3
4
Double click on My Bluetooth Places.
Double click on FIle Transfer Service.
device by selecting [Look for Devices]
.
4
If prompted, bond with the device.
Drag and drop the files to the appropriate
folder.1 See “memory card folder
structure” on page 46.
Your phone connects with the devices and
transfers the information.
Note: This process may be different
depending on the PC manufacturer.
how to check if your PC
supports Bluetooth FTP
1
Right click on the Bluetooth icon in the
system tray and open Bluetooth
configuration.
2
Click on the Client Applications tab and
check that File Transfer is active.
1. If a music file is not visible in My Music, press
/>
Reload Music while in the music player application. All
music files within the Music folder on your microSD
card will be loaded into My Music.
Note: This process may be different
depending on the PC manufacturer.
main attractions
74
call features
•
•
Pictures sent or received
Datebook events received
turn off a call alert
You can press the volume keys to turn off a
call alert before answering the call.
The recent calls list displays up to 20 of the
most recent calls and call alerts.
1
Press
screen, press
/
>
Recent Calls or from the idle
to access Recent Calls.
recent calls
`
The recent calls list contains information
associated with calls you have made and
received and call alerts you have received.
2
3
Scroll through the list.
To view more details of the item
press
r.
When you send or receive Private calls, the
recent call list contains the following PTX
items with those calls:
Note: All Private, Blocked or Anonoymous
calls received will be displayed as Private in
recent calls.
•
•
•
Contact information received
My Info received
Short text messages received
call features
75
store an item to contacts from
recent calls
redial
To redial your last outgoing call, press and
Phone calls, Private calls, My Info, Contacts or
Location entries received from other phones
can be stored to the Contacts list from the
Recent Calls list.
hold
`. If your last outgoing call was a
Private Call, push the PTT button to initiate a
new Private call.
Find it:
/
>
Recent Calls
caller ID
1
Scroll to or select the item you want to
store.
Caller ID allows people to identify a caller
before answering the phone by displaying the
number of the incoming call. If you do not
want your number displayed when you make
a call, just follow these easy steps.
2
Press
:under Save to store the
information as a new entry in the
Contacts list.
or
To block your phone number from being
displayed for a specific outgoing call:
3
Select an existing contact and update the
information.
1
2
3
Press * 6 7
Enter the number you want to call.
Press
.
4
Press :under Save to save your changes.
`
.
call features
76
To permanently block your number, call your
customer service provider.
If Busy: When your handset is on a call or
transferring data.
If No Answer: When you do not answer on
the first 4 rings.
call forward
If Unreachable: When your handset is out of
coverage or powered off.
Call forwarding sends calls to the phone
numbers you specify. You can forward all calls
to one number or forward missed calls to
different numbers depending on the reason
you missed the call. You can forward phone
lines 1 and 2 independently.
emergency calls
Your service provider programs one or more
emergency phone numbers that you can call
under any circumstances. Emergency calls
can be made without a SIM card, when your
phone is locked, or when the SIM card is
blocked.
Find it:
/
>
u
>
Phone Calls
>
Call Forward
1
To forward all calls select All Calls and select
To to enter the phone number you want all
your calls forwarded to.
or
Note: Emergency numbers vary by country.
Your phone’s preprogrammed emergency
number(s) may not work in all locations, and
sometimes an emergency call cannot be
placed due to network, environmental, or
interference issues.
2
You can specify a forwarding number for
each type of missed call by selecting
Detailed and choosing the following options:
call features
77
Dial 911 or your local emergency number to
be connected to an emergency response
center. If you are on an active call, you must
end it before making an emergency call.
open, press
under Yes
:under Unlock, and press :
.
international calls
If your phone service includes international
dialing, press and hold to insert your local
international access code (indicated by +).
Then, press the keypad keys to dial the
country code and phone number.
When you make an emergency call, your
phone’s GPS Enabled feature can help
0
emergency service personnel find you, if you
are in a location where your phone's GPS
antenna has established a clear view of the
open sky and your local emergency response
center has the equipment to process location
information. Because of the limitations of this
feature, always provide your location, to the
best of your knowledge, to the emergency
response center when you make an
speed dial
Each phone number stored in Contacts is
assigned a Speed Dial number, which you can
use to call that number.
emergency call
.
1
From the home screen, use the keypad to
enter the Speed Dial number assigned to
the phone number you want to call.
Note: Emergency calls cannot be placed
while the keypad is locked, or if your phone is
displaying a No Service message on the screen.
To unlock the keypad, if the flip is closed,
open the flip to reveal the keypad. If the flip is
2
3
Press
Press
#.
`
.
call features
78
•
Press
ror :under Back.
turbo dial
If the caller leaves a message, this icon
appears on the display, reminding you that
you have a new message.
3
The first nine entries in your contacts are set
for turbo dial. They can be called by pressing
and holding the speed dial number
(1 through 9).
voicemail
To receive voice mail messages, you must
first set up a voice mail account with your
service provider.
receiving a message
When you receive a voice mail message,
New VoiceMail Message appears on the display.
To call your service provider’s voice mail
system and listen to the message:
1
2
Press
:under Call.
To dismiss the message notification:
call features
79
MOTOtalk™
Note: This feature may not be offered by your
service provider.
•
•
Use up to 10 channels
Communicate with standalone
MOTOtalk radios
With MOTOtalk, you can make and receive
Two-Way Radio calls without network
coverage. If you are travelling outside your
service provider's coverage area, receiving a
poor signal, or otherwise want to temporarily
avoid using your service provider's network,
you can switch to MOTOtalk and talk with
anyone on your code and channel who is
within range.
Note: You cannot use MOTOtalk with older
Family Radio Services products.
The following features and main menu items
are unavailable while in MOTOtalk:
•
•
•
•
•
•
•
On-network phone or Private calls
Data transmission
Incoming message notification
Datebook
Note: Range will vary based on terrain,
man-made structures and atmospheric
conditions.
Call forwarding
MOTOtalk lets you:
Call Timers
•
Use code or private mode operation
Call alerts
MOTOtalk™
80
Switching to Network Please Wait displays. After a few
seconds, the network idle screen appears.
switching to MOTOtalk
To set your phone to MOTOtalk:
talk range
While in MOTOtalk mode, phones should be a
minimum of 6 feet apart to maximize
performance and improve transmission range.
1
2
From the home screen press
MOTOtalk and press
/
>
p
>
r
.
Select Go to MOTOtalk
.
Switching to MOTOtalk Please Wait displays.
After a few seconds, the MOTOtalk idle
screen displays. When MT Ready displays,
you can begin using MOTOtalk.
channels and codes
Your phone has 10 channels and 15 codes.
Channels are divided into sets of frequencies.
Other parties may be talking on the same
channel. Codes minimize interference from
other parties when you are sharing the same
channel.
While in MOTOtalk, this icon
4
displays.
exiting MOTOtalk
To switch to network mode:
MOTOtalk opens to the last code and channel
used on your phone. You can view the code
and channel your phone is currently set to on
the MOTOtalk idle screen.
1
2
From the MOTOtalk idle screen, press
MT Options and press
/
>
p
>
r.
Select Exit MOTOtalk
.
MOTOtalk™
81
For code calls, all parties must be on the
same channel and code. For private MOTOtalk
calls, the person you are calling must be in
MOTOtalk and set to the same channel to
receive your call.
To set a code:
1
From the MOTOtalk idle screen, press
under Edit
:
.
2
3
4
5
Scroll to Code
Press under Edit
Select a code.
When you are finished, press
Back to return to the MOTOtalk idle screen.
.
:
.
Note: When making a code call, all parties
that are on your code and channel can hear
your conversation.
:
under
setting channels and codes
To set a channel:
making code calls
1
From the MOTOtalk idle screen, press
under Edit
:
To make a code call:
.
1
From the MOTOtalk idle screen or the
channel and code edit screen, press and
hold the PTT button. Transmit appears on
the first line of display. Begin speaking
after your phone emits the MOTOtalk
tone.
2
3
4
5
Scroll to Channel
Press under Edit
Select a channel.
When you are finished, press
.
:
.
:
under
Back to return to the MOTOtalk idle screen.
Note: The MOTOtalk tone consists of 4 rapid
beeps.
MOTOtalk™
82
2
Release the PTT button to listen.
If you receive an error message:
receive transmissions with the code set to
Receive All, the code that the transmission was
received on will replace Receive All on the
display.
•
•
No one is on your channel or code.
You are out of range.
Note: You cannot initiate a code call when the
code is set to Receive All
.
receiving code calls
To set the code to Receive All
:
When you receive a code call, Receive will
appear on the display. After hearing the
MOTOtalk tone, you have 6 seconds to reply
before the call times out.
1
From the MOTOtalk idle screen, press
under Edit
:
.
2
3
4
5
Scroll to Code
Press under Edit
Select Receive All
When you are finished, press
Back to return to the MOTOtalk idle screen.
.
:
.
To reply to the call, press the PTT button.
.
Note: An incoming MOTOtalk call can be
terminated at any time by pressing
@.
:
under
receiving all MOTOtalk calls
To reply to a call with the code set to Receive All
:
If you set the code to Receive All, your phone
can receive MOTOtalk transmissions from any
phone that is set to the same channel,
regardless of the code (1-15). When you
•
Press the PTT button.
MOTOtalk™
83
5
When you are finished, press
Back to return to the MOTOtalk idle screen.
:under
private MOTOtalk calls
If you want to have a private conversation
without other parties listening in, you can
make a private MOTOtalk call. The person you
are calling must be in MOTOtalk and set to
the same channel to receive your call.
making a private MOTOtalk call
1
Enter the PTN of the person you want to
call on your channel. If the PTN is more
than 10-digits, enter the last 10-digits of
the PTN, or scroll to a number or name in
Contacts or the Recent Calls List.
private only
To set MOTOtalk to ignore code calls, so that
you only make or receive private MOTOtalk
2
3
Press and hold the PTT button. Begin
speaking after your phone emits the
MOTOtalk tone.
calls, set your code to Pvt Only
.
To set the code to Pvt Only
:
Release the PTT button to listen.
1
From the MOTOtalk idle screen, press
under Edit
:
The number or name of the person you
are calling will appear in the display.
.
2
3
4
Scroll to Code
Press under Edit
Select Pvt Only
.
If you receive an error message:
:
.
•
•
The PTN you entered is invalid.
.
The person that you are trying to reach
is in network mode.
MOTOtalk™
84
•
•
The person that you are trying to reach
is set to a different channel.
making emergency calls
in MOTOtalk™ mode
If you attempt to make an Emergency 911 call
while in MOTOtalk mode, your phone will
automatically exit MOTOtalk mode and
attempt to find a network signal.
The person that you are trying to reach
is out of range.
receiving a private MOTOtalk
call
If you are out of network coverage your phone
will not be able to make an emergency 911
cellular call until you go back into the network
coverage area.
The number or name of the person who is
calling will appear in the display.
To reply, press the PTT button.
You must wait until the phone reconnects to
the network before attempting to make an
emergency 911 cellular call.
ending code calls and private
MOTOtalk calls
Code calls and private MOTOtalk calls will end
automatically after 6 seconds of inactivity.
setup options
The MOTOtalk idle screen will display.
You can set up MOTOtalk options on the MT
Options screen. You can access this screen in
both network and MOTOtalk modes.
Note: A private or code MOTOtalk call can be
interrupted during the 6 second idle time by
another code call or private call.
MOTOtalk™
85
To access setup options:
main menu. However, you can still access
setup options while in MOTOtalk by pressing
1
2
Press /> p
Select Setup
>
MOTOtalk or MT Options.
/
and selecting > MT Options
>
Setup.
.
To turn off Direct Launch:
You can set the following MOTOtalk options:
1
2
From the Setup screen, scroll to
Direct Launch and press
•
Direct Launch: Launch directly into
MOTOtalk when you select MOTOtalk
from the main menu.
r
.
Select Off
.
MT Options will now display when you select
MOTOtalk from the main menu.
•
State Tone: Have an alert sound notify you
that you have used MOTOtalk for a
specified interval.
using direct launch
To set your phone to launch MOTOtalk when
you select MOTOtalk from the main menu:
1
From the Setup screen, scroll to
Direct Launch and press
r
.
2
Select On
.
Note: If Direct Launch is set to On, the MOTOtalk
setup options will be unavailable from the
MOTOtalk™
86
using state tone
To set your phone to alert you after you have
used MOTOtalk for a specified interval:
1
From the Setup screen, scroll to State Tone
and press
r
.
2
Select the interval after which you want
the tone to sound.
For example, if you select 1 hour, you will be
notified every hour that you are in MOTOtalk.
To turn off State Tone:
1
From the Setup screen, scroll to State Tone
and press
r
.
2
Select Off
.
MOTOtalk™
87
customize
4
When you are finished, press :under
ring tones
Done
.
To set the ring tone your phone makes when
you receive phone calls, call alerts, message
notifications, pictures sent using Send via PTT
or Datebook reminders:
Note: This icon
you set your phone to Silent. This icon
appears on the display if you set the phone to
,
appears on the display if
5
Vibrate All
.
Find it:
/
>
j
>
Ring Tones
set your phone to vibrate
1
2
Make sure Vibrate All is set to Off
.
You can set your phone to vibrate instead of
making a sound when you receive all phone
calls, Private calls, group calls, SDG calls, call
alerts, message notifications, pictures sent
using Send via PTT, and Datebook reminders.
Scroll through the list of ring tones and
select the one you want to assign.
Vibrate sets your phone to vibrate instead
of making a sound. Silent sets your phone
to neither vibrate nor make a sound.
Find it:
/
>
j
>
Ring Tones
>
Vibrate All
3
Select the features you want to assign the
ring tone to.
Set this option to On or Locked
.
customize
88
Setting this option to On lets you turn Vibrate All
off by pressing the up volume control. Setting
this option to Locked requires you to press and
hold the up volume control to turn Vibrate All off.
The Locked option helps prevent you from
accidentally turning Vibrate All off.
4
When you are finished, press :under
Done
.
backlight
Set the amount of time that the display and
java apps. backlights remain on, or turn off the
PTT backlight feature to extend battery life.
To set Vibrate All to On or Locked using the volume
controls:
Find it:
/
>
u
>
Display/Info
>
Backlight
Press the volume controls to turn down the
volume as far as possible to set Vibrate All to On
.
Continue to hold the down volume control to
wallpaper
set Vibrate All to Locked
.
Set a previously saved photo or picture as a
wallpaper (background) image in your phone’s
external display, internal screen or throughout
all menu screens.
To set your phone to vibrate instead of making
a sound for some features but not others:
Find it:
/
>
j
>
Ring Tones
1
2
3
Make sure Vibrate All is set to Off
.
Find it:
/
>
u
>
Display/Info
Select External or Internal
Scroll through the list of pictures and
press to select a picture.
>
Wallpaper
Select Vibrate from the list of ring tones.
1
2
.
Select the features you want to set to
make no sound.
r
customize
89
3
Press :under Done.
feature
You can set the internal and external
wallpapers to change automatically after a
certain period of time by turning on the
Auto Cycle feature located in the Wallpaper
event
reminder
When an event reminder
occurs press under View.
:
Press under Back to close
:
the reminder.
menu. You can select from Off, 5 minutes
15 minutes 1 hour 8 hours Daily, or Startup
,
receive
datebook
events via
PTT
To view the information
while still in the Private call
,
,
,
.
press
r.
datebook
feature
The 5 most recent events
received from a Private ID
are stored with the that
Private ID on the recent calls
list.
create
datebook
events
To create a new Datebook
event press
/
>
C
>
Datebook
>
[New Event].
To store events to the
see
datebook
event
To see a calendar event
Datebook press
:under
press
Press
/
>
C
>
Datebook.
Save while viewing the event
you want to store.
;
left or right to see
up or down
to see the events.
the day and
;
customize
90
datebook setup
options
Find it:
/
>
C
>
Datebook
>
/
>
Setup
Clock: Controls whether the time and date
appear on the home screen; sets time and
date format; sets year.
You can view or change these options:
options
Start View: Sets Datebook to start in day view,
week view, or month view when you
access Datebook.
hide or show
location information
Your phone is equipped with a Position feature
for use in connection with location-based
services that may be available in the future.
Daily Begin: Sets the beginning of your day.
This is the earliest time of day displayed in
week view, if you have a 12-hour day view.
Delete After: Sets the amount of time
Datebook waits to delete an event after it
occurs.
Your position will allow the network to detect
your position using GPS technology, making
some applications and services easier to use.
Time Shift: Lets you shift the times of all
Datebook events. This is useful if you are
traveling to a different time zone.
Find it:
/
>
C
>
GPS Postion
>
Alert Timeout: Sets the amount of time a tone
continues to sound when you receive a
Datebook reminder.
customize
91
reorder apps menu
Java applications can be reordered to change
the order in which they appear on your phone.
Find it:
/
>
Games and Apps
to reorder apps menu
1
Press
Highlight (without selecting) Java System and
press
Select Reorder Apps Menu
Scroll to the java application you want to
move and press under Grab
Scroll to the place where you want the
java application to appear and press
under Insert
/
>
Games and Apps
>
More.
2
/
.
3
.
4
:
.
5
:
.
customize
92
the battery compartment is closed and secure to avoid direct exposure of the battery
to any of these conditions.
Important: Use Motorola Original products for quality assurance and
safeguards. To aid consumers in identifying authentic Motorola batteries from
non-original or counterfeit batteries (that may not have adequate safety protection),
Motorola provides holograms on its batteries. Consumers should confirm that any
battery they purchase has a “Motorola Original” hologram.
Motorola recommends you always use Motorola-branded batteries and
chargers. Motorola mobile devices are designed to work with Motorola batteries.
If you see a message on your display such as Invalid Battery or
Unable to Charge, take the following steps:
Safety, Regulatory & Legal
Battery Use & Safety
Battery Use & Safety
Important: Handle and store batteries properly to avoid injury or damage.
Most battery issues arise from improper handling of batteries, and particularly from
the continued use of damaged batteries.
DON’Ts
•
Don’t disassemble, crush, puncture, shred, or otherwise attempt to
change the form of your battery.
•
Don’t let the phone or battery come in contact with water. Water can get
into the phone’s circuits, leading to corrosion. If the phone and/or battery get
wet, have them checked by your service provider or contact Motorola, even if
they appear to be working properly.*
•
Remove the battery and inspect it to confirm that it has a “Motorola Original”
hologram;
•
•
•
If there is no hologram, the battery is not a Motorola battery;
If there is a hologram, replace the battery and retry charging it;
If the message remains, contact a Motorola authorized service center.
•
•
Don’t allow the battery to touch metal objects. If metal objects, such as
jewelry, stay in prolonged contact with the battery contact points, the battery
could become very hot.
Important: Motorola’s warranty does not cover damage to the phone caused by
non-Motorola batteries and/or chargers.
Don’t place your battery near a heat source. Excessive heat can damage the
phone or the battery. High temperatures can cause the battery to swell, leak, or
malfunction. Therefore:
Warning: Use of a non-Motorola battery or charger may present a risk of fire,
explosion, leakage, or other hazard.
Proper and safe battery disposal and recycling: Proper battery disposal is not
only important for safety, it benefits the environment. Consumers may recycle their
used batteries in many retail or service provider locations. Additional information on
proper disposal and recycling may be found on the Web:
•
•
Do not dry a wet or damp battery with an appliance or heat source, such as a
hair dryer or microwave oven.
Avoid leaving your phone in your car in high temperatures.*
DOs
•
•
www.motorola.com/recycling
•
•
Do avoid dropping the battery or phone. Dropping these items, especially on
www.rbrc.org/call2recycle/ (in English only)
a hard surface, can potentially cause damage.*
Disposal: Promptly dispose of used batteries in accordance with local
regulations. Contact your local recycling center or national recycling
organizations for more information on how to dispose of batteries.
032375o
Do contact your service provider or Motorola if your phone or battery
has been damaged from dropping or high temperatures.
* Note: If the product guide expressly states that your phone is designed to resist
damage from exposure to certain rugged conditions, such as water immersion, rain,
dust, high and low temperatures, shock, or other conditions, do not exceed the
stated limits, and ensure the stated precautions are taken. Always make sure that
Warning: Never dispose of batteries in a fire because they may explode.
93
Before a mobile device is available for sale to the public in the U.S. and Canada, it
must be tested and certified to the FCC and Industry Canada that it does not exceed
the limit established by each government for safe exposure. The tests are performed
in positions and locations (e.g., at the ear and worn on the body) submitted to the
FCC and available for review by Industry Canada. The highest SAR value for this
mobile device when tested for use at the ear is 0.45 W/kg, and when worn on the
body, as described in this guide, is 0.63 W/kg. Body-worn measurements can differ,
depending upon available accessories and regulatory requirements. The SAR
information includes the Motorola testing protocol, assessment procedure, and
measurement uncertainty range for this product.
Battery Charging
Battery Charging
Notes for charging your phone’s battery:
•
When charging your battery, keep it near room temperature. Never expose
batteries to temperatures below 0˚C (32˚F) or above 45˚C (113˚F) when charging.
New batteries are not fully charged.
New batteries or batteries stored for a long time may take more time to charge.
Motorola batteries and charging systems have circuitry that protects the battery
from damage from overcharging.
•
•
•
Specific Absorption Rate (IEEE)
SAR (IEEE)
While there may be differences between the SAR levels of various mobile devices
and at various positions, they meet the governmental requirements for safe
exposure. Please note that improvements to this product model could cause
differences in the SAR value for later products; in all cases, products are designed to
be within the guidelines.
Your model wireless phone meets the governmental
requirements for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is designed and
manufactured to not exceed limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the U.S. Government and by the
Canadian regulatory authorities. These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed for the safety of all persons,
regardless of age or health, and to account for any variations in measurements.
The exposure standard for mobile devices employs a unit of measurement known as
the Specific Absorption Rate (SAR). The IEEE SAR limit set by the FCC and by the
Canadian regulatory authorities is 1.6 watts per kilogram (W/kg), averaged over one
gram of tissue. Tests for SAR are conducted using procedures accepted by the FCC
and by Industry Canada with the mobile device transmitting at its highest certified
power level in all tested frequencies. Although the SAR is determined at the highest
certified power level, the actual SAR level of the mobile device while operating can
be below the maximum value. This is because the mobile device is designed to
operate at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station, the lower the
power output.
Additional information on SAR can be found on the Cellular Telecommunications
& Internet Association (CTIA) Web site:
http://www.phonefacts.net
or the Canadian Wireless Telecommunications Association (CWTA) Web site:
http://www.cwta.ca
Software Copyright Notice
Software Copyright Notice
Motorola products may include copyrighted Motorola and third-party software
stored in semiconductor memories or other media. Laws in the United States and
other countries preserve for Motorola and third-party software providers certain
exclusive rights for copyrighted software, such as the exclusive rights to distribute
or reproduce the copyrighted software. Accordingly, any copyrighted software
contained in Motorola products may not be modified, reverse-engineered,
distributed, or reproduced in any manner to the extent allowed by law. Furthermore,
the purchase of Motorola products shall not be deemed to grant either directly or by
implication, estoppel, or otherwise, any license under the copyrights, patents, or
patent applications of Motorola or any third-party software provider, except for the
normal, non-exclusive, royalty-free license to use that arises by operation of law in
the sale of a product.
94
Defense policy and the Federal Radio Navigation Plan. These changes may affect
the performance of location technology on your mobile device.
Your mobile device can also use Assisted Global Positioning System (AGPS), which
obtains information from the cellular network to improve GPS performance. AGPS
uses your wireless service provider's network and therefore airtime, data charges,
and/or additional charges may apply in accordance with your service plan. Contact
your wireless service provider for details.
Content Copyright
Content Copyright
The unauthorized copying of copyrighted materials is contrary to the provisions of
the Copyright Laws of the United States and other countries. This device is intended
solely for copying non-copyrighted materials, materials in which you own the
copyright, or materials which you are authorized or legally permitted to copy. If you
are uncertain about your right to copy any material, please contact your legal
advisor.
Your Location
Open Source Software Information
Location-based information includes information that can be used to determine the
approximate location of a mobile device. Mobile phones which are connected to a
wireless network transmit location-based information. Devices enabled with GPS or
AGPS technology also transmit location-based information. Additionally, if you use
applications that require location-based information (e.g. driving directions), such
applications transmit location-based information. This location-based information
may be shared with third parties, including your wireless service provider,
applications providers, Motorola, and other third parties providing services.
OSS Information
For instructions on how to obtain a copy of any source code being made publicly
available by Motorola related to software used in this Motorola mobile device, you
may send your request in writing to the address below. Please make sure that the
request includes the model number and the software version number.
MOTOROLA, INC.
OSS Management
600 North US Hwy 45
Libertyville, IL 60048
Emergency Calls
USA
When you make an emergency call, the cellular network may activate the AGPS
technology in your mobile device to tell the emergency responders your approximate
location.
The Motorola website opensource.motorola.com also contains information
regarding Motorola's use of open source.
Motorola has created the opensource.motorola.com website to serve as a
portal for interaction with the software community-at-large.
To view additional information regarding licenses, acknowledgments and required
copyright notices for open source packages used in this Motorola mobile device,
AGPS has limitations and might not work in your area. Therefore:
•
•
Always tell the emergency responder your location to the best of your ability; and
Remain on the phone for as long as the emergency responder instructs you.
please touch
>
Settings
>
About Phone
>
Legal information
>
Performance Tips
Open source licenses. In addition, this Motorola device may include
self-contained applications that present supplemental notices for open source
packages used in those applications.
•
Go outside and away from underground locations, covered vehicles, structures
with metal or concrete roofs, tall buildings, and foliage. Indoor performance
might improve if you move closer to windows, but some window sun shielding
films can block satellite signals.
GPS & AGPS
•
Move away from radios, entertainment equipment, and other electronic devices.
GPS & AGPS
Your mobile device can use Global Positioning System (GPS) signals for
location-based applications. GPS uses satellites controlled by the U.S. government
that are subject to changes implemented in accordance with the Department of
95
mode or in front of the face in the two-way radio mode, keep the device at least 2.5
centimeters (1 inch) from your body when transmitting.
Navigation
Navigation
Motorola strives to provide complete and accurate mapping information, directions,
Using accessories not supplied or approved by Motorola may cause your mobile
device to exceed RF energy exposure guidelines. For a list of Motorola-supplied or
and other navigational data, using a combination of governmental and private
location information sources. These sources may contain inaccurate or incomplete
data. In some countries, complete information may not be available. Therefore, you
should visually confirm that the navigational instructions are consistent with what
you see. All drivers should pay attention to road conditions, closures, traffic, and all
other factors that may impact driving. Always obey posted road signs.
approved accessories, visit our Web site at: www.motorola.com
.
Two-Way Radio Operation
Your radio product has been designed and tested to comply with national and
international standards and guidelines regarding human exposure to RF
electromagnetic energy, when operated in the two-way mode (at the face, or at the
abdomen when using an audio accessory) at usage factors of up to 50% talk/50%
listen.
Safety & General Information
Safety Information
This section contains important information on the safe and efficient
operation of your mobile device. Read this information before using your
mobile device.
Transmit no more than the rated duty factor of 50% of the time. To transmit (talk),
push the PTT button. To receive calls, release the PTT button. Transmitting 50% of
the time or less, is important because this radio generates measurable RF energy
only when transmitting (in terms of measuring for standards
compliance).
Exposure to Radio Frequency (RF) Energy
Your mobile device contains a transmitter and receiver. When it is ON, it receives
and transmits RF energy. When you communicate with your mobile device, the
system handling your call controls the power level at which your mobile device
transmits.
Your mobile device is designed to comply with local regulatory requirements in your
country concerning exposure of human beings to RF energy.
When using your radio product as a traditional two-way radio,
hold the radio product in a vertical position with the
microphone 2.5 to 5 centimeters (1 to 2 inches) away from
the lips
.
RF Energy Interference/Compatibility
Nearly every electronic device is subject to RF energy interference from external
sources if inadequately shielded, designed, or otherwise configured for RF energy
compatibility. In some circumstances, your mobile device may cause interference
with other devices.
Follow Instructions to Avoid Interference Problems
Turn off your mobile device in any location where posted notices instruct you to do
so.
In an aircraft, turn off your mobile device whenever instructed to do so by airline
staff. If your mobile device offers an airplane mode or similar feature, consult airline
staff about using it in flight.
Operational Precautions
For optimal mobile device performance, and to be sure that human exposure to RF
energy does not exceed the guidelines set forth in the relevant standards, always
follow these instructions and precautions.
Product Operation
When placing or receiving a phone call, hold your mobile device just like you would
a landline phone.
If you wear the mobile device on your body, always place the mobile device in a
Motorola-supplied or approved clip, holder, holster, case, or body harness. If you do
not use a body-worn accessory supplied or approved by Motorola and are not using
the mobile device in the intended use positions along side the head in the phone
96
the radio frequency range between 9 kHz and 300 GHz.” “Attachment to
Resolution 303 from July 2, 2002."
Implantable Medical Devices
If you have an implantable medical device, such as a pacemaker or defibrillator,
consult your physician before using this mobile device.
Driving Precautions
Persons with implantable medical devices should observe the following precautions:
Using a mobile device while driving may cause distraction. End a call if you can’t
concentrate on driving. Input information about your destination and route prior to
your drive. Do not input data or engage in text messaging while driving. Keep your
eyes on the road while driving. Listen to the audible turn-by-turn directions, if
available.
•
ALWAYS keep the mobile device more than 20 centimeters (8 inches) from the
implantable medical device when the mobile device is turned ON.
DO NOT carry the mobile device in the breast pocket.
Use the ear opposite the implantable medical device to minimize the potential
for interference.
•
•
Also, using a mobile device or accessory may be prohibited or restricted in certain
areas. Always obey the laws and regulations on the use of these products.
Responsible driving practices can be found at www.motorola.com/callsmart
(in English only).
•
Turn OFF the mobile device immediately if you have any reason to suspect that
interference is taking place.
Read and follow the directions from the manufacturer of your implantable medical
device. If you have any questions about using your mobile device with your
implantable medical device, consult your healthcare provider.
Operational Warnings
Obey all posted signs when using mobile devices in public areas.
Portable Radio Product Operation and EME
Potentially Explosive Atmospheres
Exposure
Areas with potentially explosive atmospheres are often, but not always, posted and
can include fueling areas, such as below decks on boats, fuel or chemical transfer or
storage facilities, or areas where the air contains chemicals or particles, such as
grain dust, or metal powders.
Your Motorola radio product is designed to comply with the following national and
international standards and guidelines regarding exposure of human beings to radio
frequency electromagnetic energy (EME):
•
United States Federal Communications Commission, Code of Federal
Regulations; 47 CFR part 2 sub-part J.
When you are in such an area, turn off your mobile device, and do not remove,
install, or charge batteries unless it is a radio product type especially qualified for
use in such areas as “Intrinsically Safe” (for example, Factory Mutual, CSA, or UL
approved). In such areas, sparks can occur and cause an explosion or fire.
•
American National Standards Institute (ANSI) / Institute of Electrical and
Electronics Engineers (IEEE). C95. 1-1992.
•
•
•
Institute of Electrical and Electronics Engineers (IEEE). C95. 1-2005 Edition.
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998.
Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to Radio
frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz,
1999.
Australian Communications Authority Radio communications (Electromagnetic
Radiation - Human Exposure) Standard 2003.
ANATEL, Brazil Regulatory Authority, Resolution 303 (July 2, 2002) “Regulation of
the limitation of exposure to electrical, magnetic, and electromagnetic fields in
Symbol Key
Your battery, charger, or mobile device may contain symbols, defined as follows:
Symbol
Definition
•
•
032374o
Important safety information follows.
97
Glass Parts
Symbol
Definition
Some parts of your mobile device may be made of glass. This glass could break if
the product is dropped on a hard surface or receives a substantial impact. If glass
breaks, do not touch or attempt to remove. Stop using your mobile device until the
glass is replaced by a qualified service center.
Do not dispose of your battery or mobile device in a fire.
Your battery or mobile device may require recycling in
accordance with local laws. Contact your local regulatory
authorities for more information.
Seizures/Blackouts
032375o
Some people may be susceptible to epileptic seizures or blackouts when exposed to
flashing lights, such as when playing video games. These may occur even if a person
has never had a previous seizure or blackout.
Do not throw your battery or mobile device in the trash.
If you have experienced seizures or blackouts, or if you have a family history of such
occurrences, please consult with your physician before playing video games or
enabling a flashing-lights feature (if available) on your mobile device.
Discontinue use and consult a physician if any of the following symptoms occur:
convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or
disorientation. It is always a good idea to hold the screen away from your eyes,
leave the lights on in the room, take a 15-minute break every hour, and stop use if
you are tired.
Do not let your battery, charger, or mobile device get wet.
Listening at full volume to music or voice through a headset may
damage your hearing.
Caution About High Volume Usage
Warning: Exposure to loud noise from any source for extended
periods of time may affect your hearing. The louder the volume sound
level, the less time is required before your hearing could be affected.
To protect your hearing:
Batteries & Chargers
Caution: Improper treatment or use of batteries may present a danger of fire,
explosion, leakage, or other hazard. For more information, see “Battery Use &
Safety.”
•
•
•
Limit the amount of time you use headsets or headphones at high volume.
Avoid turning up the volume to block out noisy surroundings.
Keep Your Mobile Device & Its Accessories Away
From Small Children
Turn the volume down if you can’t hear people speaking near you.
If you experience hearing discomfort, including the sensation of pressure or fullness
in your ears, ringing in your ears, or muffled speech, you should stop listening to the
device through your headset or headphones and have your hearing checked.
For more information about hearing, see our Web site at
These products are not toys and may be hazardous to small children. For example:
•
•
•
A choking hazard may exist for small, detachable parts.
Improper use could result in loud sounds, possibly causing hearing injury.
Improperly handled batteries could overheat and cause a burn.
direct.motorola.com/hellomoto/nss/AcousticSafety.asp (in English
only).
98
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation. See 47 CFR Sec. 15.19(3).
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Repetitive Motion
When you repetitively perform actions such as pressing keys or entering
finger-written characters, you may experience occasional discomfort in your hands,
arms, shoulders, neck, or other parts of your body. If you continue to have discomfort
during or after such use, stop use and see a physician.
[Nov0109]
Industry Canada Notice to Users
Industry Canada Notice
Operation is subject to the following two conditions: (1) This device may not cause
interference and (2) This device must accept any interference, including interference
that may cause undesired operation of the device. See RSS-GEN 7.1.5. This Class B
digital apparatus complies with Canadian ICES-003.
FCC Declaration of Conformity
FCC DoC
•
•
•
Reorient or relocate the receiving antenna.
Per FCC CFR 47 Part 2 Section 2.1077(a)
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard,
Plantation, FL 33322 USA
•
Consult the dealer or an experienced radio/TV technician for help.
Phone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: i890
Use & Care
Use & Care
To care for your Motorola mobile device, please observe the following:
Model Number: H75XAH6JS5AN
FCC ID: IHDT56KQ1
liquids of any kind
Conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a),
15.107(d) and section 15.109(a)
Don't expose your mobile device to water outside of the stated limits,
and ensure the stated precautions are taken. Avoid exposure to other
liquids, especially corrosive liquids.
FCC Notice to Users
FCC Notice
The following statement applies to all products that have received FCC
extreme heat or cold
approval. Applicable products bear the FCC logo, and/or an FCC ID in the
format FCC ID:xxxxxx on the product label.
Don't expose your mobile device to extreme high or low temperatures
outside of the stated limits, and ensure the stated precautions are
taken.
Motorola has not approved any changes or modifications to this device by the user.
Any changes or modifications could void the user’s authority to operate the
equipment. See 47 CFR Sec. 15.21.
99
microwaves
a consumer's exclusive remedy, and applies as follows to new Products,
Accessories and Software purchased by consumers in the United States or
Canada, which are accompanied by this written warranty:
Don’t try to dry your mobile device in a microwave oven.
Products Covered
Length of Coverage
dust and dirt
Don’t expose your mobile device to dust, dirt, sand, food, or other
inappropriate materials outside of the stated limits, and ensure the
stated precautions are taken.
Products as defined above.
One (1) year from the date of purchase by
the first consumer purchaser of the product
unless otherwise provided for below.
cleaning solutions
Accessories as defined
above.
One (1) year from the date of purchase by
the first consumer purchaser of the product
unless otherwise provided for below.
To clean your mobile device, use only a dry soft cloth. Don’t use alcohol
or other cleaning solutions.
Products or Accessories that
are Repaired or Replaced.
The balance of the original warranty or
for ninety (90) days from the date
returned to the consumer, whichever is
longer.
shock and vibration
Don’t expose your mobile device to shock or vibration outside of the
stated limits, and ensure the stated precautions are taken.
rugged features
Software as defined above.
Applies only to physical defects
in the media that embodies the
copy of the software (e.g.
Ninety (90) days from the date of
purchase.
Your mobile device is designed to resist damage from exposure to
certain rugged conditions as specified in your product guide. Don’t
expose your mobile device to conditions outside the specified limits.
CD-ROM, or floppy disk).
Motorola Limited Warranty for the United
States and Canada
What is Not Covered? (Exclusions)
Warranty
What Does this Warranty Cover?
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts
due to normal wear and tear are excluded from coverage.
Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES AND SOFTWARE
PURCHASED IN THE UNITED STATES OR CANADA.
Ornamental Decorations. Ornamental decorations such as emblems, graphics,
rhinestones, jewels, gemstones and their settings, and other decorative elements,
are excluded from coverage.
Subject to the exclusions contained below, Motorola, Inc. warrants its Motorola
iDEN Digital Mobile and Portable Handsets ("Products"), Motorola-branded or
certified accessories sold for use with these Products ("Accessories") and Motorola
software contained on CD-Roms or other tangible media and sold for use with these
Products ("Software") to be free from defects in materials and workmanship under
normal consumer usage for the period(s) outlined below. This limited warranty is
Batteries. Only batteries whose fully charged capacity falls below 80% of their
rated capacity and batteries that leak are covered by this limited warranty.
Abuse & Misuse. Defects or damage that result from abuse, misuse or accidents,
including but not limited to: (a) improper handling, usage, operation or storage (e.g.
100
operating the Product outside its permitted or intended uses including as set forth by
Motorola in the Products specification sheets or other documentation, or failing to
comply with the Products usage documentation); abuse/neglect (e.g.
broken/bent/missingclips/fasteners/ connectors); (b) contact with liquids, water,
rain, extreme humidity, heavy perspiration or other moisture, sand, food, dirt or
similar substances caused from incorrectly securing the phone’s protective elements
or subjecting the Products to conditions beyond their stated specification or limits;
(c) use of the Products for commercial rental purposes; or (d) external causes or acts
which are not the fault of Motorola, including but not limited to flood, fire,
earthquake, tornado or other acts of God, are excluded from coverage.
Use of Non-Motorola Products and Accessories. Defects or damage that result
from the use of Non-Motorola branded or certified Products, Accessories, Software
or other peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or damages resulting from
service, testing, adjustment, installation, maintenance, alteration, including without
limitation, software changes, or modification in any way by someone other than
Motorola, or its authorized service centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags
that have been removed, altered or obliterated; (b) broken seals or that show
evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming
or non-Motorola housings, antennas, or parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of Products,
Accessories or Software due to any communication service or signal you may
subscribe to or use with the Products, Accessories or Software is excluded from
coverage.
Who is Covered?
This warranty extends only to the first consumer purchaser, and is not transferable.
What Will Motorola Do?
Motorola, at its option, will at no charge repair, replace or refund the purchase price
of any Products, Accessories or Software that does not conform to this warranty. We
may use functionally equivalent reconditioned/refurbished/pre-owned or new
Products, Accessories or parts. No data, software or applications added to your
Product, Accessory or Software, including but not limited to personal contacts,
games and ringer tones, will be reinstalled. To avoid losing such data, software and
applications please create a back up prior to requesting service.
How to Obtain Warranty Service or Other
Information
To obtain service or information, please call:
Motorola iDEN Customer Services: 1-800-453-0920 or 954-723-4910
TTY: 877-483-2840
Or visit us online at http://www.motorola.com/iden
You will receive instructions on how to ship the Products, Accessories or Software,
at your expense, to a Motorola Authorized Repair Center. To obtain service, you must
include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase;
(b) a written description of the problem; (c) the name of your service provider, if
applicable; (d) the name and location of the installation facility (if applicable) and,
most importantly; (e) your address and telephone number.
What Other Limitations are There?
Software Embodied in Physical Media. No warranty is made that the software
will meet your requirements or will work in combination with any hardware or
software applications provided by third parties, that the operation of the software
products will be uninterrupted or error free, or that all defects in the software
products will be corrected.
Software NOT Embodied in Physical Media. Software that is not embodied in
physical media (e.g. software that is downloaded from the internet), is provided "as
is" and without warranty.
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE
THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS
PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO
EVENT SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF
THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL,
101
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR
PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR
APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION
WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR
SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the limitation or exclusion of incidental
or consequential damages, or limitation on the length of an implied warranty, so the
above limitations or exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights that vary from state to state
or from one jurisdiction to another.
Laws in the United States and other countries preserve for Motorola certain
exclusive rights for copyrighted Motorola software such as the exclusive rights to
reproduce and distribute copies of the Motorola software. Motorola software may
only be copied into, used in, and redistributed with, the Products associated with
such Motorola software. No other use, including without limitation disassembly of
such Motorola software or exercise of the exclusive rights reserved for Motorola, is
permitted.
be an equal amount per year over the lifetime of the Product or parts as
established by MOTOROLA.
MOTOROLA will have no liability with respect to any claim of patent infringement
which is based upon the combination of the Product or parts furnished hereunder
with software, apparatus or devices not furnished by MOTOROLA, nor will
MOTOROLA have any liability for the use of ancillary equipment or software not
furnished by MOTOROLA which is attached to or sued in connection with the
Product or any parts thereof. In no event shall MOTOROLA be liable for any
incidental, special or consequential damages arising from any claim of patent
infringement or alleged infringement.
Laws in the United States and other countries preserve for MOTOROLA certain
exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights
to reproduce in copies and distribute copies of such MOTOROLA software.
MOTOROLA software may be used in only the Product in which the software was
originally embodied and such software in such Product may not be replaced, copied,
distributed, modified in any way, or used to produce any derivative thereof. No other
use including, without limitation, alteration, modification, reproduction, distribution,
or reverse engineering of such MOTOROLA software or exercise or rights in such
MOTOROLA software is permitted. No license is granted by implication, estoppel or
otherwise under MOTOROLA patent rights or copyrights.
Patent and Software Provisions:
MOTOROLA will defend, at its own expense, any suit brought against the end user
purchaser to the extent that it is based on a claim that the Product or parts infringe a
patent, and Motorola will pay those costs and damages finally awarded against the
end user purchaser in any such suit which are attributable to any such claim, but
such defense and payments are conditioned on the following:
Hearing Aid Compatibility with Mobile
Phones
Hearing Aid Compatibility
Some Motorola phones are measured for compatibility with hearing aids. If the box
•
•
•
That MOTOROLA will be notified promptly in writing by such purchaser of any
notice of such claim;
for your particular model has “Rated for Hearing Aids” printed on it, the following
explanation applies.
That MOTOROLA will have sole control of the defense of such suit and all
negotiations for its settlement or compromise; and
When some mobile phones are used near some hearing devices (hearing aids and
cochlear implants), users may detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
Should the Product or parts become, or in MOTOROLA’S opinion be likely to
become, the subject of a claim of infringement of a patent, that such purchaser
will permit MOTOROLA, at its option and expense, either to procure for such
purchaser the right to continue using the Product or parts or to replace or modify
the same so that it becomes non infringing or to grant such purchaser a credit for
the Product or parts as depreciated and accept its return. The depreciation will
The wireless telephone industry has developed ratings for some of their mobile
phones, to assist hearing device users in finding phones that may be compatible
with their hearing devices. Not all phones have been rated. Phones that are rated
102
have the rating on their box or a label on the box. To maintain the published Hearing
Aid Compatibility (HAC) rating for this mobile phone, use only the original equipment
battery model.
Product registration is an important step toward enjoying your new Motorola
product. Registering permits us to contact you for product or software updates and
allows you to subscribe to updates on new products or special promotions.
Registration is not required for warranty coverage.
The ratings are not guarantees. Results will vary depending on the user’s hearing
device and hearing loss. If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone successfully. Trying out the
phone with your hearing device is the best way to evaluate it for your personal
needs.
Please retain your original dated sales receipt for your records. For warranty service
of your Motorola Personal Communications Product you will need to provide a copy
of your dated sales receipt to confirm warranty status.
Thank you for choosing a Motorola product.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to
generate less interference to hearing devices than phones that are not labeled. M4
is the better/higher of the two ratings.
Export Law Assurances
Export Law
This product is controlled under the export regulations of the United States of
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more
usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than
unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing
devices have telecoils in them.)
America and Canada. The Governments of the United States of America and Canada
may restrict the exportation or re-exportation of this product to certain destinations.
For further information contact the U.S. Department of Commerce or the Canadian
Department of Foreign Affairs and International Trade.
Hearing devices may also be measured for immunity to this type of interference.
Your hearing device manufacturer or hearing health professional may help you find
results for your hearing device. The more immune your hearing aid is, the less likely
you are to experience interference noise from mobile phones.
CaringfortheEnvironmentbyRecycling
Recycling Information
This symbol on a Motorola product means the product should not be
disposed of with household waste.
Disposal of your Mobile Device &
Accessories
Information from the World Health
Organization
Please do not dispose of mobile devices or electrical accessories (such
WHO Information
Present scientific information does not indicate the need for any special precautions
as chargers, headsets, or batteries) with your household waste. Do not
for the use of mobile phones. If you are concerned, you may want to limit your own
or your children’s RF exposure by limiting the length of calls or by using handsfree
devices to keep mobile phones away from your head and body.
Source: WHO Fact Sheet 193
dispose of your battery or mobile device in a fire. These items should be
disposed of in accordance with the national collection and recycling
schemes operated by your local or regional authority. Alternatively, you may return
unwanted mobile devices and electrical accessories to any Motorola Approved
Service Center in your region. Details of Motorola approved national recycling
schemes, and further information on Motorola recycling activities can be found at:
www.motorola.com/recycling
Further information: http://www.who.int/peh-emf
Product Registration
Registration
Online Product Registration:
www.motorola.com/us/productregistration
103
•
•
Online accounts—Some mobile devices provide a Motorola online account
(such as MOTOBLUR). Go to your account for information on how to manage the
account, and how to use security features such as remote wipe and device
location (where available).
Location-based information—Location-based information includes
information that can be used to determine the approximate location of a mobile
device. Mobile phones which are connected to a wireless network transmit
location-based information. Devices enabled with GPS or AGPS technology also
transmit location-based information. Additionally, if you use applications that
require location-based information (e.g. driving directions), such applications
transmit location-based information. This location-based information may be
shared with third parties, including your wireless service provider, applications
providers, Motorola, and other third parties providing services.
Disposal of your Mobile Device Packaging &
Product Guide
Product packaging and product guides should only be disposed of in accordance with
national collection and recycling requirements. Please contact your regional
authorities for more details.
California Perchlorate Label
Perchlorate Label
Some mobile phones use an internal, permanent backup battery on the printed
circuit board that may contain very small amounts of perchlorate. In such cases,
California law requires the following label:
Perchlorate Material – special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate
There is no special handling required by consumers.
•
Other information your device may transmit—Your device may also transmit
testing and other diagnostic (including location-based) information, and other
non-personal information to Motorola or other third-party servers. This
information is used to help improve products and services offered by Motorola.
Privacy & Data Security
Privacy & Data Security
Motorola understands that privacy and data security are important to everyone.
Because some features of your mobile device may affect your privacy or data
security, please follow these recommendations to enhance protection of your
information:
If you have further questions regarding how the use of your mobile device may
impact your privacy or data security, please contact Motorola at
[email protected], or contact your service provider.
•
•
•
Monitor access—Keep your mobile device with you and do not leave it where
others may have unmonitored access. Lock your device’s keypad where this
feature is available.
Smart Practices While Driving
Driving Safety
Drive Safe, Call Smart
Keep software up to date—If Motorola or a software/application vendor
releases a patch or software fix for your mobile device that updates the device’s
security, install it as soon as possible.
Check the laws and regulations on the use of mobile devices and their
accessories in the areas where you drive. Always obey them. The use of
these devices may be prohibited or restricted in certain areas—for
example, handsfree use only. Go to www.motorola.com/callsmart
(in English only) for more information.
Secure personal information—Your mobile device can store personal
information in various locations including your SIM card, memory card, and
phone memory. Be sure to remove or clear all personal information before you
recycle, return, or give away your device. You can also backup your personal data
to transfer to a new device.
Note: For information on how to backup or wipe data from your mobile device,
go to www.motorola.com/support
Your mobile device lets you communicate by voice and data—almost anywhere,
anytime, wherever wireless service is available and safe conditions allow. When
driving a car, driving is your first responsibility. If you choose to use your mobile
device while driving, remember the following tips:
104
•
•
Get to know your Motorola mobile device and its features such as speed
dial and redial. If available, these features help you to place your call without
taking your attention off the road.
assistance or other special non-emergency wireless number (wherever wireless
phone service is available).
When available, use a handsfree device. If possible, add
an additional layer of convenience to your mobile device with
one of the many Motorola Original handsfree accessories
available today.
•
Position your mobile device within easy reach. Be able to
access your mobile device without removing your eyes from the road. If you
receive an incoming call at an inconvenient time, if possible, let your voicemail
answer it for you.
•
•
•
•
•
•
Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain,
sleet, snow, ice, and even heavy traffic can be hazardous.
Do not take notes or look up phone numbers while driving. Jotting down a
“to do” list or going through your address book takes attention away from your
primary responsibility—driving safely.
Dial sensibly and assess the traffic; if possible, place calls when your
car is not moving or before pulling into traffic. If you must make a call while
moving, dial only a few numbers, check the road and your mirrors, then continue.
Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving and
suspend conversations that can divert your attention away from the road.
Use your mobile device to call for help. Dial 911 or other local emergency
number in the case of fire, traffic accident, or medical emergencies (wherever
wireless phone service is available).
Use your mobile device to help others in emergencies. If you see an auto
accident, crime in progress, or other serious emergency where lives are in
danger, call 911 or other local emergency number (wherever wireless phone
service is available), as you would want others to do for you.
•
Call roadside assistance or a special non-emergency wireless
assistance number when necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal, a minor traffic accident where
no one appears injured, or a vehicle you know to be stolen, call roadside
105
Motorola, Inc.
Consumer Advocacy Office
600 N US Hwy 45
Libertyville, IL 60048
www.hellomoto.com
Note: Do not ship your phone to the above address. If you need to return your phone
for repairs, replacement, or warranty service, please contact the Motorola Customer
Support Center at:
1-800-453-0920 (United States)
1-877-483-2840 (TTY/TDD United States for hearing impaired)
Certain mobile phone features are dependent on the capabilities and settings of
your service provider’s network. Additionally, certain features may not be activated
by your service provider, and/or the provider’s network settings may limit the
feature’s functionality. Always contact your service provider about feature
availability and functionality. All features, functionality, and other product
specifications, as well as the information contained in this guide, are based upon
the latest available information and believed to be accurate at the time of printing.
Motorola reserves the right to change or modify any information or specifications
without notice or obligation.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark
Office. The Bluetooth trademarks are owned by their proprietor and used by
Motorola, Inc. under license. Microsoft, Windows, Windows Me, and Windows
Vista are registered trademarks of Microsoft Corporation in the United States and
other countries. Google, YouTube, Picasa, Gmail, and the Google logo are
trademarks of Google, Inc. Swype is a trademark of Swype, Inc.
is a
Certification Mark of the Wireless Fidelity Alliance, Inc. All other product or service
names are the property of their respective owners.
© 2010 Motorola, Inc. All rights reserved.
Caution: Changes or modifications made in the radio phone, not expressly approved
by Motorola, will void the user’s authority to operate the equipment.
Manual Number: NNTN9002A
106
www.motorola.com
|