Belkin Network Cables 8820 00111 F5D4076 User Manual

Gigabit Powerline HD  
Networking Adapter  
User Manual  
8820-00111  
F5D4076  
 
INTroDUCTIoN  
table of contents  
sections  
1
2
3
4
Thank you for purchasing the Gigabit Powerline HD Networking Adapter (the Adapter). Most people don’t enjoy buying long and  
expensive Ethernet cables or pulling the cables from one place to another, but the Adapter offers one of the easiest ways to enjoy  
home or small-business networking. Users can now experience a total network solution with the Adapter. The Gigabit Powerline  
HD Networking Adapter is interoperable with the HomePlug® AV Powerline standard, but provides up to 1000Mbps* bandwidth over  
home AC wiring. This is five times faster than the current HomePlug standard. Since the home power lines are the most pervasive  
medium in households with multiple outlets in every room, the Adapter allows multiple home desktop and notebook computers to  
be networked to share an Internet connection, printers, and files, stream video, and play games without any additional wiring. The  
advanced signal processing is capable of maintaining coverage throughout the entire house, even across different phase rings.  
These adapters also use xtendnet technology to ensure the most  
robust powerline network in the market. Each additional Belkin Gigabit  
Powerline HD or Powerline AV Adapter that is plugged in is capable of  
repeating the data signal for maximum coverage of your home.  
For security, all HomePlug devices are equipped with 128-bit AES  
encryption. The private home power grid plus encryption makes  
HomePlug significantly more secure than competing technologies.  
The Gigabit Powerline HD Networking Adapter provides the best  
solution for no-new-wires home networking. With easy plug-and-play  
installation, and the reliability of HomePlug, the Gigabit Powerline HD  
Networking Adapter is the best solution for high-speed networking.  
The installation of the Adapter only requires that a 10/100/1000Mbps  
Ethernet port is available on your device. This makes the Gigabit  
Powerline HD Networking Adapter compatible with any device, including  
Mac, Windows, and UNIX machines. Note that you need at least two  
adapters to create a powerline network.  
Gigabit Powerline HD Networking Adapter  
1
 
INTroDUCTIoN  
table of contents  
sections  
1
2
3
4
features  
Up to 1000Mbps* bandwidth over standard home power lines  
HomePlug signal easily passes through circuit breaker  
128-bit AES encryption ensures data security  
Encryption completed by hardware, without sacrifice of bandwidth  
Uses IEEE 802.3 computer interface  
Plug-and-play installation  
xtendnet™ feature for a robust powerline network  
HomePlug AV-compliant  
Coexistence with HomePlug 1.0 and 1.0 Turbo networks  
Gigabit Powerline HD Networking Adapter  
2
 
INTroDUCTIoN  
table of contents  
sections  
1
2
3
4
Product specifications  
Computer Interface: IEEE 802.3/802.3u  
Operating Temperature: 32–95 degrees F (0–35 degrees C)  
Storage Temperature: -4–176 degrees F (-20–80 degrees C)  
Humidity: Max. 5%–90% (non-condensing)  
*The standard transmission rate1000Mbps—is the physical data rate.  
Actual data throughput will be lower.  
Gigabit Powerline HD Networking Adapter  
3
 
INTroDUCTIoN  
table of contents  
sections  
1
2
3
4
Power leD  
system requirements  
At least 2 HomePlug AV-compatible devices  
Available Ethernet port on each computer or network device  
Available power outlet  
Standard home powerline wiring  
CD-ROM drive  
Solid Blue  
Off  
Powered on  
Power off  
Blinking Blue  
Solid Blue  
Double Flash  
Encryption setting up  
Encryption setup successful  
Fail in encryption  
Package Contents  
Two Gigabit Powerline HD Networking Adapters  
HomePlug Quick Installation Guide  
HomePlug User Manual (on CD)  
CD-ROM  
Powerline link leD  
Link rate excellent: greater than  
200Mbps  
Color Blue  
Color Amber  
Off  
Link rate low: less than 200Mbps  
No activity  
Limited Warranty Card  
Two RJ45 Ethernet Cables  
One Power Cable  
Two Wall Plug Adapters  
ethernet link leD  
Solid Blue  
Blinking Blue  
Off  
10/100/1000Mbps port linked  
Data transmitting or receiving  
No Ethernet link  
Gigabit Powerline HD Networking Adapter  
4
 
INsTAllING AND seTTING UP THe ADAPTers  
table of contents  
sections  
1
2
3
4
overview  
Hardware setup  
Installation of the Gigabit Powerline HD Networking Adapter takes only  
seconds and does not require setting up long wires throughout the  
house. Simply plug the units directly into any available wall outlet and  
connect to any device with an Ethernet port. Users have the option to  
randomly change the security password for their powerline network.  
1.  
2.  
3.  
4.  
Plug your network cable into the device’s RJ45 network  
adapter port.  
Plug the other end of your network cable into the RJ45 port  
located at the back of the Adapter.  
Plug the power cable or wall adapter into the power connector  
at the back of the Adapter.  
Insert the power plug of your power cable or wall adapter directly  
into a power outlet in the wall.  
NoTe: Do not plug the device into a UPs or power strip with  
surge protection as they may filter the powerline signal.  
5.  
Repeat this process for the second Adapter.  
Gigabit Powerline HD Networking Adapter  
5
 
CoNfIGUrATIoN  
table of contents  
sections  
1
2
3
4
overview  
Changing the Network Password  
The Adapter uses 128-bit AES encryption to block access from  
the outside. By default, the protection is enabled. However, it is  
recommended that you change the default network password with the  
“Encryption” button located on the units.  
1.  
With both Adapters plugged into the wall, press the “Encryption”  
button on both units for 10 seconds. The password on these  
Adapters has now been changed to a random value.  
2.  
3.  
4.  
Next, press the “Encryption” button on one unit for more than 0.5  
seconds, but less than three seconds.  
Within two minutes, press the “Encryption” button on the second  
unit for more than 0.5 seconds, but less than three seconds.  
The new network password has now been saved to the second  
unit. The password will not be lost, even if the Adapters are  
unplugged from the wall.  
Gigabit Powerline HD Networking Adapter  
6
 
CoNfIGUrATIoN  
table of contents  
sections  
1
2
3
4
Adding Another Adapter to the Network  
resetting to factory Defaults  
Using a pointed object, press and hold the “Reset” button for one  
second to restore defaults. This procedure resets the network password  
to the default out-of-box value.  
1.  
2.  
3.  
4.  
If the default network password has been changed, a new Adapter  
will have to load the new password before it can join the network.  
Press the “Encryption” button on an encrypted unit for more than  
0.5 seconds, but less than three seconds.  
Technical support  
Within two minutes, press the “Encryption” button on the new unit  
for more than 0.5 seconds, but less than three seconds.  
You can find technical support information at www.belkin.com/  
support or www.belkin.com.  
The new device has now been loaded with the network password  
and added to the current powerline network.  
Gigabit Powerline HD Networking Adapter  
7
 
INforMATIoN  
table of contents  
sections  
1
2
3
4
fCC statement  
DeClArATIoN of CoNforMITY WITH fCC rUles for eleCTroMAGNeTIC CoMPATIbIlITY  
We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA  
90220, declare under our sole responsibility that the device,  
This equipment generates, uses, and can radiate radio frequency  
energy. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment  
off and on, the user is encouraged to try and correct the interference by  
one or more of the following measures:  
f5D4076-sv1,  
to which this declaration relates, complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1) this device may not  
cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
Reorient or relocate the receiving antenna.  
Increase the distance between the equipment and the receiver.  
Connect the equipment to an outlet on a circuit different from that  
to which the receiver is connected.  
Caution: exposure to radio frequency radiation  
The radiated output power of this device is far below the FCC radio  
frequency exposure limits. Nevertheless, the device shall be used in  
such a manner that the potential for human contact during normal  
operation is minimized. When connecting an external antenna to the  
device, the antenna shall be placed in such a manner to minimize the  
potential for human contact during normal operation. In order to avoid  
the possibility of exceeding the FCC radio frequency exposure limits,  
human proximity to the antenna shall not be less than 20cm (8 inches)  
during normal operation.  
Consult the dealer or an experienced radio/TV technician for help.  
Modifications  
The FCC requires the user to be notified that any changes or modifications  
to this device that are not expressly approved by Belkin International, Inc.,  
may void the user’s authority to operate the equipment.  
europe – eU Declaration of Conformity  
This device complies with the essential requirements of the R&TTE  
Directive 1999/5/EC. The following test methods have been applied  
in order to prove presumption of conformity with the essential  
requirements of the R&TTE Directive 1999/5/EC:  
federal Communications Commission Notice  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation.  
EN60950-1:2001 A11:2004  
Safety of Information Technology Equipment  
Gigabit Powerline HD Networking Adapter  
8
 
INforMATIoN  
table of contents  
sections  
1
2
3
4
belkin International, Inc., limited 1-Year Product Warranty  
What this warranty covers.  
What is not covered by this warranty?  
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of  
this Belkin product that the product shall be free of defects in design,  
assembly, material, or workmanship.  
All above warranties are null and void if the Belkin product is not  
provided to Belkin for inspection upon Belkin’s request at the sole  
expense of the purchaser, or if Belkin determines that the Belkin product  
has been improperly installed, altered in any way, or tampered with.  
The Belkin Product Warranty does not protect against acts of God such  
as flood, earthquake, lightning, war, vandalism, theft, normal-use wear  
and tear, erosion, depletion, obsolescence, abuse, damage due to low  
voltage disturbances (i.e. brownouts or sags), non-authorized program,  
or system equipment modification or alteration.  
What the period of coverage is.  
Belkin warrants the Belkin product for one year.  
What will we do to correct problems?  
Product Warranty.  
Belkin will repair or replace, at its option, any defective product free of  
charge (except for shipping charges for the product). Belkin reserves the  
right to discontinue any of its products without notice, and disclaims any  
limited warranty to repair or replace any such discontinued products.  
In the event that Belkin is unable to repair or replace the product (for  
example, because it has been discontinued), Belkin will offer either a  
refund or a credit toward the purchase of another product from Belkin.  
com in an amount equal to the purchase price of the product as  
evidenced on the original purchase receipt as discounted by its  
natural use.  
How to get service.  
To get service for your Belkin product you must take the following steps:  
1. Contact Belkin International, Inc. within 15 days of the Occurrence.  
Be prepared to provide the following information:  
a. The part number of the Belkin product.  
b. Where you purchased the product.  
c. When you purchased the product.  
d. Copy of original receipt.  
2. Your Belkin Customer Service Representative will then instruct you  
on how to forward your receipt and Belkin product and how to  
proceed with your claim.  
Gigabit Powerline HD Networking Adapter  
9
 
INforMATIoN  
table of contents  
sections  
1
2
3
4
Belkin reserves the right to review the damaged Belkin product. All  
costs of shipping the Belkin product to Belkin for inspection shall be  
borne solely by the purchaser. If Belkin determines, in its sole discretion,  
that it is impractical to ship the damaged equipment to Belkin, Belkin  
may designate, in its sole discretion, an equipment repair facility to  
inspect and estimate the cost to repair such equipment. The cost, if any,  
of shipping the equipment to and from such repair facility and of such  
estimate shall be borne solely by the purchaser. Damaged equipment  
must remain available for inspection until the claim is finalized.  
Whenever claims are settled, Belkin reserves the right to be subrogated  
under any existing insurance policies the purchaser may have.  
How state law relates to the warranty.  
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN.  
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS  
REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY  
OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY,  
ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.  
Some states do not allow limitations on how long an implied warranty  
lasts, so the above limitations may not apply to you.  
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL,  
DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH  
AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING  
OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
This warranty gives you specific legal rights, and you may also have  
other rights, which may vary from state to state. Some states do not  
allow the exclusion or limitation of incidental, consequential, or other  
damages, so the above limitations may not apply to you.  
Gigabit Powerline HD Networking Adapter  
10  
 
Belkin International, Inc.  
501 West Walnut Street  
Los Angeles, CA 90220, USA  
310-898-1100  
Belkin B.V.  
Boeing Avenue 333  
1119 PH Schiphol-Rijk  
The Netherlands  
+31 (0) 20 654 7300  
+31 (0) 20 654 7349 fax  
310-898-1111 fax  
Belkin Ltd.  
Express Business Park, Shipton Way  
Rushden, NN10 6GL  
United Kingdom  
+44 (0) 1933 35 2000  
+44 (0) 1933 31 2000 fax  
Belkin Ltd.  
4 Pioneer Avenue  
Tuggerah Business Park  
Tuggerah, NSW 2259, Australia  
+61 (0) 2 4350 4600  
+61 (0) 2 4350 4700 fax  
© 2009 Belkin International, Inc. All rights reserved. All trade names are registered trademarks  
of respective manufacturers listed. Windows and Windows Vista are either registered trademarks  
or trademarks of Microsoft Corporation in the United States and/or other countries.  
 

Billy Goat Vacuum Cleaner QL2300KO User Manual
Blaupunkt MP3 Player Compact Drive MP3 User Manual
Blue Rhino Gas Grill NSP2304L 0184639 User Manual
Bogen Stereo Amplifier CT100C User Manual
Briggs Stratton Portable Generator 030325 User Manual
Broan Universal Remote BCR1 User Manual
Bryant Heating System 379H User Manual
Carson Automobile Alarm SC 1022 User Manual
Casio Watch MA1502 EC User Manual
CFM Corporation Indoor Fireplace 2468 User Manual