800-B-1006-A
Commercial Gas
Ultra High Efficiency Water Heater
The Ultra High Efficiency Water Heater Models Feature:
I Thermal Efficiency Up To 99.1%.
I 60 Gallon Tank Capacity in 125,000, 150,000 and 199,999
BTU/hr Inputs.
I 100 Gallon Tank Capacity in 150,000, 199,999, 250,000, 300,000
and 399,999 BTU/hr Inputs.
I Flexible Venting—Conventional, Through-the-Wall or Direct Vent.
I Three Pass Flue System.
I Low NOx Premix Power Burner.
I Ultra Quiet Operation.
I Submerged Combustion Chamber.
I 1" NPT Side Connection For Hydronic Applications.
I Electronic Controls.
I Zero Inch Clearance To Combustibles.
®
I Vitraglas Lined Tank.
I Four Protective Magnesium Anode Rods (except EF-100T-399).
I Powered Anode Rods (only EF-100T-399).
I Hand Hole Cleanout—Allows inspection of tank interior.
®
I Factory Installed Hydrojet Sediment Reduction System.
I Factory Installed Dielectric Fittings.
I Non-CFC Foam Insulation.
I 3" Optional Concentric Vent Kit.
I ASME Construction Available.
I NSF Construction Available With Optional Kit.
I Brass Drain Valve.
I T&P Relief Valve Factory Installed.
I Three Year Limited Warranty On Steel Tank.
I One Year Limited Warranty On Parts.
Photo is of
EF-100T-199
3 or 5-Year Limited Tank Warranties / 1-Year Limited Warranty on Component Parts.
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties.
See complete copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 7,063,133 B2; 5,954,492; 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185;
5,485,879; 5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968;
4,672,919; Re. 34,534. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105.
Vitraglas® and Hydrojet® are registered trademarks of Bradford White® Corporation. ©2006, Bradford White Corporation. All rights reserved. Printed in U.S.A.
Ultra High Efficiency Water Heaters
Gas Inlet
81⁄4
Exhaust
81⁄4
Air Intake
T & P Valve
B
3
281⁄4
⁄4" NPT Gas Inlet
3" PVC Air Inlet
T & P Valve
B
11⁄2" NPT
Outlet
A
E
1" NPT Space
Heating Outlet
G
H
Cleanout
1" NPT Space
Heating Return
C
3" PVC
EXHAUST
11⁄2" NPT Inlet
Drain
D
23⁄8
"
F
1
⁄
2" NPT CONDENSATE
3" PVC Exhaust
CONNECTION
NOTE: Diagrams are for both the 60 and 100 gallon models.
®
eF Series Commercial Ultra High Efficiency Water Heater
Meet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed
Includes Installed T&P Valve and Electronic Ignition
NATURAL GAS AND LIQUID PROPANE GAS
Input 1ST Hour
Delivery
Recovery GPH
at Degree Rise
Stg. Therm.
A
B
C
D
E
F
G
H
Water Gas Relief Approx.
Model
Number
Capacity Eff. Floor to Jacket HW Cold Floor to Floor to Floor to Floor to Conn. Conn. Valve Shipping
at 100°F
Top of Dia. Out In
Heater
Gas
Vent
Air
T&P
Dia. Dia. Open Weight
Rise
Conn. Outlet Intake Conn.
U.S.
Gal.
BTU
Gal.
40°F 100°F 140°F
%
in.
in.
in. in.
in.
in.
in.
in.
in.
in.
in.
lbs.
V
V
V
V
V
V
V
V
G # EF-60T-125E-3N(A) 125,000 187
G # EF-60T-150E-3N(A) 150,000 211
G # EF-60T-199E-3N(A) 199,999 265
G # EF-100T-150E-3N(A) 150,000 250
G # EF-100T-199E-3N(A) 199,999 309
G # EF-100T-250E-3N(A) 250,000 364
G # EF-100T-300E-3N(A) 300,000 405
G # EF-100T-399E-3N(A) 399,999 521
364
423
558
450
597
735
836
145
169
223
180
239
294
335
104
121
159
129
171
210
239
322
60
60
60
100
100
100
100
100
96.0
93.0
92.0
99.1
98.5
97.0
92.0
93.0
57
57
57
775/8
775/8
775/8
775/8
775/8
281/4 42 13
281/4 42 13
281/4 42 13
281/4 63 13
281/4 63 13
281/4 63 13
281/4 63 13
281/4 63 13
531/2
531/2
531/2
743/4
743/4
743/4
743/4
731/4
5
5
5
5
5
5
5
5
521/2
521/2
521/2
731/8
731/8
731/8
731/8
731/8
40
40
40
60
60
60
60
60
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1
3/4
3/4
3/4
3/4
3/4
1
570
570
570
900
900
900
900
950
1
1
1127 451
Input 1ST Hour
Recovery LPH
at Degree Rise
Stg. Therm.
A
B
C
D
E
F
G
H
Water Gas Relief Approx.
Model
Delivery
Number
at 56°C
Capacity Eff. Floor to Jacket HW Cold Floor to Floor to Floor to Floor to Conn. Conn. Valve Shipping
Top of Dia. Out In
Heater
Gas
Vent
Air
T&P
Dia. Dia. Open Weight
Rise
Conn. Outlet Intake Conn.
kW
Liters 22°C 56°C 78°C
Liters
%
mm.
mm. mm. mm. mm.
mm.
mm.
mm. mm. mm. mm.
kgs.
V
V
V
V
V
V
V
V
G # EF-60T-125E-3N(A)
G # EF-60T-150E-3N(A)
G # EF-60T-199E-3N(A)
G # EF-100T-150E-3N(A) 43.9
G # EF-100T-199E-3N(A) 58.6
G # EF-100T-250E-3N(A) 73.2
G # EF-100T-300E-3N(A) 87.9
G # EF-100T-399E-3N(A) 117.2
36.6
43.9
58.6
708
799
1003
946
1170
1378
1533
1972
1378 545
1601 640
3112 844
1703 681
2260 905
2782 1113 795
3165 1268 905
4266 1707 1219
394
458
602
488
647
227
227
227
379
379
379
379
379
96.0 1448
93.0 1448
92.0 1448
99.1 1972
98.5 1972
97.0 1972
92.0 1972
93.0 1972
718 1067 330 1359
718 1067 330 1359
718 1067 330 1359
718 1600 330 1899
718 1600 330 1899
718 1600 330 1899
718 1600 330 1899
718 1600 330 1861
128
128
128
128
128
128
128
128
1324
1324
1324
1857
1857
1857
1857
1857
994
994
994
1527
1527
1527
1527
1524
38
38
38
38
38
38
38
38
19
19
19
19
19
19
19
25
19
19
19
19
19
25
25
25
259
259
259
408
408
408
408
431
For propane gas models change suffix “N” to “X” and remove “E” from the model number.
Example: EF-100T-150-3X
V - 115V A.C. Required
• - Electronic Ignition
#- Listed with California Energy Commission
Note: The weight is the same for both ASME and Non-ASME models.
NSF Construction Available with optional kit
Complies with SCAQMD low NOx requirements — 10.39 ng/joule
Design certified by CSA International (formerly AGA/CGA)
Amp Draw range = 1.0 to 1.8 amps and 7.0 amps for EF-100T-399
150 PSI Working Pressure (1034 kPa), 300 PSI Test Pressure (2068 kPa)
(A) ASME - All models are available with ASME construction. To order ASME
construction add the (A) to the end of the model number. Example: EF-60T-125E-3NA
Ultra High Efficiency Water Heaters
All models are design certified by CSA International (formerly AGA/CGA) for up to 180°F (82°C) application as an Automatic
Storage Heater, and an Automatic Circulating Tank Heater.
As an Automatic Storage Heater, all models are complete self-contained water heating systems. It needs no separate
storage tank, pump, wiring or elaborate piping network. When equipped with a mixing valve, it will supply 180°F (82°C)
sanitizing and 140°F (60°C) general purpose hot water simultaneously. These models can be used either as a single unit or
as multiples connected in parallel.
Sample Specification
The water heater shall be a Bradford White model EF-_____ with a rated storage capacity of not less than _____ gallons/
liters, a minimum gas input of __________ BTU/hr, a minimum recovery of _____ GPH/LPH at 100°F (56°C) temperature rise,
and a Thermal Efficiency Rating of ____%. It shall be design certified by CSA International (formerly AGA and CGA) for
180°F (82°C) application, either with or without a separate storage tank. The tank shall be lined with Vitraglas® vitreous
enamel and shall have a bolted hand hole cleanout. The tank shall have four extruded magnesium anode rods installed in
separate head couplings (up to 300,000 BTU/hr input) or two powered anode rods and one extruded magnesium anode rod
(for 399,999 BTU/hr input). This water heater shall be equipped with stainless steel cold water inlet, Hydrojet® Sediment
Reduction System. The heater shall be insulated with Non-CFC foam. This water heater shall be equipped with an electronic
ignition system, an ASME rated T&P relief valve and a premix closed combustion system for direct venting using either 3"
(76mm) or 4" (102mm) PVC, CPVC or ABS vent pipe. (115V AC required). The water heater shall be factory assembled and
tested. The water heater shall be approved for zero inch clearance to combustibles. The control shall be an adjustable
electronic thermostat to any temperature up to 180°F (82°C). A recycling Energy Cut Off (E.C.O.) shuts off all gas in the
event of an overheat condition. The entire installation shall be made in compliance with state and local codes and
ordinances.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous
product improvement.
Ambler, PA
For U.S. and Canada field service, contact your professional installer or local Bradford White sales representative.
G
G
G
G
Sales 800-523-2931 Fax 215-641-1670 / Technical Support 800-334-3393 Fax 269-795-1089 Warranty 800-531-2111 Fax 269-795-1089
G
International: Telephone 215-641-9400 Telefax 215-641-9750 / Fax on Demand 888-538-7833 / www.bradfordwhite.com
G
Sales / Technical Support 866-690-0961 / 905-238-0100 Fax 905-238-0105 / www.bradfordwhitecanada.com
©2006, Bradford White Corporation. All rights reserved.
800-B-1006-A
Printed in U.S.A.
|