Package Contents
Charging your electronic
device
•
•
•
Mobile Battery Pack
Micro USB Charging Cable
Quick Setup Guide
USB (output)
DX-922 / DX-1022 / DX-1122 / DX-1222
Mobile Battery Pack
OUT 5V/1A
5
Charging the mobile battery
Fully charge your mobile battery pack
before using it for the first time.
LEDs
1
2
Plug the large end of the USB cable
into the mobile battery’s USB port
(output).
Plug the small end of USB cable into
your device.
OUT 5V/1A
Micro
IN 5V/1A
USB
(input)
The mobile battery automatically
begins charging your device.
Recharge the mobile battery when the
LED starts blinking.
1
2
Plug the small end of the USB cable
into the mobile battery’s microUSB
port (input).
Plug the large end of the included
USB cable into a standard USB port on
your computer, car charger, or wall
charger (not included). The mobile
battery automatically begins
charging.
Note: If your device requires a different
connector than the one provided, use
the cable that came with your device
Before using your new product,
please read these instructions to prevent any damage.
QUICK SETUP GUIDE
|