™
®
LAZER BY HALO
CONNECTORS (For use with Lazer Track Only)
LZR200
Live End Feed with Junction
Box Cover
LZR201
Live End Feed
For starting a track run at beginning of track.
For starting a track run at beginning of
track and when connector is mounted to
a junction box.
Finishes: White (P), Black (MB)
Finishes: White (P), Black (MB)
LZR202
Floating Canopy and
Connector Feed
LZR203
Adjustable “L” and Straight
Connector Feed
Track can be connected to existing outlet
box located anywhere along the track.
Comes with canopy cover, connector,
dead end and mounting hardware.
To connect two track sections at right angles
or straight end-to-end. Includes straight and
right angle covers.
Finishes: White (P), Black (MB)
Finishes: White (P), Black (MB)
LZR204
Conduit Adapter Feed
LZR205
Conduit Continuation Feed
Designed to accept 1/2” trade size conduit
fitting (not supplied). Use when feeding
to track through surface conduit system.
Includes one left feed and one right feed
to continue a run around obstructions.
Requires 1/2” trade size fitting (not included).
Finishes: White (P), Black (MB)
Finishes: White (P), Black (MB)
LZR206
T-Bar Canopy
LZR208
Cord and Plug Feed
For installing track on T-Bar ceilings.
LZR201 or LZR203 also required.
10’ three-wire cord with grounded plug.
Maximum capacity 5 AMPS.
Finish: White (P)
Finishes: White (P), Black (MB)
LZR211
Flexible Connector Feed
LZR212
Mini Connector
To connect two track sections at any angle
up to 90° or for connecting wall and ceiling
mounted track. Can be used as electrical
feed point.
For joining two track sections end-to-end.
LZR212 is not an electrical feed.
Finishes: White (P), Black (MB)
Finishes: White (P), Black (MB)
LZR214
X Connector
LZR213R
LZR213L
Right Handed T Connector
Left Handed T Connector
For joining four track sections in an X pattern.
Can be used as electrical feed point.
To connect three track sections. Can be used as
electrical feed point.
Finishes: White (P), Black (MB)
Finishes: White (P), Black (MB)
DE112
Dead End
Replacement Dead end for Lazer Track ( 6
included).
Finishes: White (P), Black (MB)
NOTE: Unless otherwise stated, Lazer
connectors are not compatible with Halo
Miniature Power-Trac.
COOPER LIGHTING
335
|